Calling two servlets frm one browser window
My html page ahve 3 frames
and for 2 frames src are two difft. servlets and for one frame its static html file
<html>
<frameset rows="80%,20%">
<frameset cols="50%,50%">
<frame src="../servlet/CmdOutput">
<frame src="../servlet/AutoMsg">
</frameset>
<frame src="../servlets/CLI.htm">
</frameset>
<html>these two servlets are almost same... but browsers take too much time to laod it
(Except old Netscape 4.7 work fine)
instead when i remove one frame
<html>
<frameset rows="80%,20%">
<frame src="../servlet/CmdOutput">
<frame src="../servlets/CLI.htm">
</frameset>
<html>this works pretty fine....
any idea why ???????
You can probably accomplish what you want to do using frames. JSF might also be another technology that could help here depending on how you structure your application.
Similar Messages
-
How does a servlet close the browser window?
How can a servlet close the browser window it is running in?
I'm running the servlet by calling it in a browser window, passing parameters using POST, with the parameters appearing at the end of the url.
Is there another way to run the servlet, without it affecting the browser window? That would be a better solution. -
Keeping all pages in one browser window
I'm trying to figure out how to have all of my pages for my
site open under one browser window instead of opening up a new
window when each button is clicked.
I built Flash buttons for the pages and they work fine...I'm
new at this and haven't figured out how to get the pages to open up
in the main (index.html) browser window. I've tired doing it using
the Add Behaviors, GoToURL selection but it doesn't work...also the
only selection that appears is Main Window*, and I don't know what
the * signifies. I'm sure that this is simple...help please!> I built Flash buttons for the pages and they work fine
Does the page use Frames?
http://livedocs.adobe.com/flash/9.0/main/00001180.html
note this paragraph:
Security note: In Flash Player 9 and later, when code in a
SWF file that is
running in the local-with-filesystem sandbox calls the
getURL() function and
specifies a custom window name for the window parameter, the
window name is
transfered into a random name. The name is in the form
"_flashXXXXXXXX",
where each X represents a random hexadecimal digit. Within
the same session
(until you close the containing browser window), if you call
the function
again and specify the same name for the window parameter, the
same random
string is used.
so, targeting named frames is effectively broken when viewing
local files
AFAIK.
They should work as intended when uploaded to a server.
If that's not it, url address to the uploaded page please.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
How to set two radius servers one is window NPS another is cisco radius server
how to set two radius servers one is window NPS another is cisco radius server
when i try the following command, once window priority is first , i type cisco radius user name, it authenticated fail
i can not use both at the same time
radius-server host 192.168.1.3 is window NPS
radius-server host 192.168.1.1 is cisco radius
http://blog.skufel.net/2012/06/how-to-integrating-cisco-devices-access-with-microsoft-npsradius/
conf t
no aaa authentication login default line
no aaa authentication login local group radius
no aaa authorization exec default group radius if-authenticated
no aaa authorization network default group radius
no aaa accounting connection default start-stop group radius
aaa new-model
aaa group server radius IAS
server 192.168.1.1 auth-port 1812 acct-port 1813
server 192.168.1.3 auth-port 1812 acct-port 1813
aaa authentication login userAuthentication local group IAS
aaa authorization exec userAuthorization local group IAS if-authenticated
aaa authorization network userAuthorization local group IAS
aaa accounting exec default start-stop group IAS
aaa accounting system default start-stop group IAS
aaa session-id common
radius-server host 192.168.1.1 auth-port 1812 acct-port 1813
radius-server host 192.168.1.2 auth-port 1812 acct-port 1813
radius-server host 192.168.1.3 auth-port 1645 acct-port 1646
radius-server host 192.168.1.3 auth-port 1812 acct-port 1813
privilege exec level 1 show config
ip radius source-interface Gi0/1
line vty 0 4
authorization exec userAuthorization
login authentication userAuthentication
transport input telnet
line vty 5 15
authorization exec userAuthorization
login authentication userAuthentication
transport input telnet
end
conf t
aaa group server radius IAS
server 192.168.1.3 auth-port 1812 acct-port 1813
server 192.168.1.1 auth-port 1812 acct-port 1813
endThe first AAA server listed in your config will always be used unless/until it becomes unavailable. At that point the NAD would move down to the next AAA server defined on the list and use that one until it becomes unavailable and then move to third one, and so on.
If you want to use two AAA servers at the same time then you will need to put a load balancer in front of them. Then the virtual IP (vip) will be listed in the NADs vs the individual AAA servers' IPs.
I hope this helps!
Thank you for rating helpful posts! -
Opening More Than One Browser Window
Hi all,
Mac Newbie here!
A quick question.
If i wish to open more than one browser window, how do i do it?
When i used to use a PC, i just clicked IE everytime i wanted to open another window.
However, if i try to do that with Safari, nothing happens.
I have looked through various settings pages but i cant seem to find anything to help.
Any ideas?
many Thanks!!!Hi Jason,
Welcome to Apple Discussions & Mac!!
If i wish to open more than one browser window, how do i do it?
Under the Safari Menu Bar-> "File" click on the menu item "New window"
Hope that helps answere your question. Please let us know.
Eme"~[)
Helpful.. Solved.....Why Award points? -
ADF UIX: communication between more than one browser window
Dear Sirs...
how can i open more than one browser window using ADF UIX and jdeveloper 10.1.2 such that the data entered in the second window affects the data in the first?
for example in the date field, a popup window appear that allows me to select the date, and then the selection appears in the first window.
how can i achieve something similar? i am using UIX not JSP
thanks for any help in advance
best regardsdear sir...
i am afraid you got me wrong, i am not talking about the database values.
let me give you an example of what i am trying to achieve:
1- create a date field, create an input forum to fill that field (uix page)
2- now you run the application, try to click the icon near the date field, a new popup window will appear, that helps you enter the date value.
3- when you select the value, the popup window disappears and the date is inserted into the forum
i am trying to achieve something similar.
thanks for your previous answer, but you got my question wrong.
best regards -
Run same 9i forms servlet in different browser windows
Hi all,
I'm using Oracle9iAS Forms Service to deploy the forms. The problem that I have, is that I'm not able to run the same forms 9i servlet in two different browser windows.
I'm able to run the 9i test form with the following URL in browser window one: http://HOST:PORT/forms90/f90servlet
When I then try to run the same URL in a second browser window I get the following error:
FRM-92050: Failed to connect to the Server: /forms90/l90servlet:-1
Details...
Java Exception:
oracle.forms.net.ConnectionException: Connection from new browser window not supported
I'm using Jinitiator 1.3.1.9 to run the forms.
Thanks,
OliverIam trying to work with menus.
I have created a menu item EMPLOYEE and calling the employee form like this
BEGIN
RUN_PRODUCT(FORMS, 'EMPLOYEE', SYNCHRONOUS, RUNTIME, FILESYSTEM, '', '');
END;
But what happens is iam getting the error
FRM-92101: There was a failure in the form server during the startup. This can bappen due to invalid configuration. Please look into the webserver log file for detail.
Oracle.Forms.Net.ConnectionException: Connection for new browser window not supported.
Following is the content of Application.Log
06/12/16 16:59:08 Started
06/12/16 16:59:24 formsweb: jsp: init
06/12/16 16:59:24 formsweb: frmservlet: init
06/12/16 16:59:24 formsweb: FormsServlet init():
configFileName: D:\DevSuiteHome_1/forms/server/formsweb.cfg
testMode: false
06/12/16 16:59:24 formsweb: Started
06/12/16 16:59:33 formsweb: lservlet: init
06/12/16 16:59:33 formsweb: ListenerServlet init()
06/12/16 17:06:43 formsweb: Connection from new browser window not supported
06/12/16 17:06:57 formsweb: Connection from new browser window not supported
06/12/16 17:13:24 formsweb: Connection from new browser window not supported
06/12/16 17:14:07 formsweb: Connection from new browser window not supported
06/12/16 17:15:57 formsweb: Connection from new browser window not supported
This happens when i try to run more than one form in a browser.
When i try to run the employee form seperately i have no problem
Iam using Forms [32 Bit] Version 10.1.2.0.2 (Production)
can you help in this. -
Calling web report in new browser window
I have one Web-based Oracle report where I am calling another report in a FormatTrigger as:
http://myserver/cgi-bin/rwcgi60.exe?key1+:param1
I want to run this second report in a new browser window. I tried using TARGET="_blank"
but I get syntax errors. I know that without the cgi parameters, it is easy to include the TARGET after the URL. But can anyone tell me the correct syntax for the above case (with parameters)? I tried putting the TARGET before '?' and after the param but both failed.
Thanks
nulltry this in your format trigger:
web.show_document('http://myserver/cgi-bin/rwcgi60.exe?param1=value+param2=value', '_blank'); -
Cache problem for servlet opening new browser window
Requirement:
I have JSP page say summary.jsp with link "print account summary"
When user clicks on this link, new browser open with PDF document of summary.jsp
This new browser window should not have address bar and toolbar.
Solution:
Servlet called PrintSummary which sets contenttype=application/pdf and sends the data to outputstream.
href of link is
Java script function is:
function openWindow(url){
window.open(url,'blank','toolbar=no')
Problem:
Since the URL of this new window is
http:// host:portnumber/PrintSummary
Even if I click the "Print summary" link for account2,
being the same URL (http:// host:portnumber/PrintSummary) it accesses the existing page in the cache which is created for account 1.
In href if I just use servlet url as
I get the expected behaviour but then I don't have control on browser appearance and browser window will be with address bar and toolbar.
The only option I could think of was changing URL as follows:
<% String url ="javascript:openWindow('PrintSummary? var1="+ Math.random()+"')";
So that URL is different all the time
Is there any way to solve this problem?
Thanks in advance
M.I'd definitely try to use a Flex popup... but the
flash.net.navigateToURL method is a simple way to open a popup
window in a new browser. You can pass any data needed by the new
page using the URLRequest and/or URLVariables. The URL you navigate
to could, of course, be another Flex application if necessary. I
use this only when I need to open a popup window on another site,
or an HTML formatter report or something similar.
Concerning yourself with the size of the popup window may be
a bad design choice also. I, for example, have my browser
configured to open all popups in a new tab regardless of sizing
constraints imposed by the designer. If it is absolutely necessary
for you to have control over the size of your popup window, you
should follow the advice given by others and use a Flex
popup. -
Calling two transaction in one Zprogram
How to call two transaction (MIGO and MIRO)with each transaction should display two different window simultaneously from one Zprogram..
Pls let me know ...Hello Arun
If you like to use an ABAP-OO version here is my approach:
*& Report ZUS_SDN_CALL_TRANSACTION
REPORT zus_sdn_call_transaction.
TYPE-POOLS: abap.
PARAMETERS:
p_tcode TYPE tcode.
START-OF-SELECTION.
CALL FUNCTION 'AUTH_CHECK_TCODE'
EXPORTING
tcode = p_tcode
EXCEPTIONS
parameter_error = 1
transaction_not_found = 2
transaction_locked = 3
transaction_is_menu = 4
menu_via_parameter_transaction = 5
not_authorized = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD cl_reca_gui_services=>call_transaction
EXPORTING
id_tcode = p_tcode
* IF_LEAVE_CURRENT = ABAP_FALSE
* IF_SKIP_FIRST_SCREEN = ABAP_FALSE
if_new_external_mode = abap_true " new mode
EXCEPTIONS
error = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
Regards
Uwe -
How to close one browser window and return to a named anchor on a page in another window
I'm working on a website that has several book images at the bottom of each page. I have set it up so when the user clicks on a book another smaller browser window opens up with a description of the book. At the bottom of book description window, I have a close button which I added the window.close() behavior to. But I'd like to not just have the window close but return the user to the bottom of the original page where I have the books, an area that I have applied a named anchor to. Any ideas on how I can get this done.
I'd appreciate any and all help.I haven't tried to customize this lightbox extension much. But I'm pretty sure the size of the box is pre-determined by image size. Bigger image, bigger box. And that is coded into one of the Lightbox javascript libraries.
As to placing a link in the caption, sure. Just paste your html link code into the Lightbox Caption Panel like so.
<a href="http://amazon.com"> Buy now from Amazon</a>
There is much more detailed information about Lightbox and how it works at the huddled together website.
http://www.huddletogether.com/projects/lightbox/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
Opening a servlet in new browser window
Does anyone know how you can make a servlet open in a a new browser window when clicking a link for that servlet.
cheersHi..
do
window.open("http://localhost:8080//yourservlet-path//servlet-name");
you can also set window properties, they are passed as parameters to window.open
see syntax of window.open. but this thing will open your servlet in a new window with default properties. -
Call two programs from one program.
HI all,
I have two BDC interface in seperate programs.
I want to call that two programs from one program based on a condition.
Is there any way.
I tried with call transaction 'SE38'.
set parameter ID but it is taking buffered value.
Thanks,
sriuse submit program to call other program.
SUBMIT prog|(field) [AND RETURN] [options].
also if you want BDC prog, then probably you can call the BDC recording using PERFORM bdc_prog (in program name).
PERFORM (<fsubr>)[IN PROGRAM (<fprog>)][USING ... <pi>... ]
[CHANGING... <pi>... ]
[IF FOUND].
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9dd035c111d1829f0000e829fbfe/content.htm -
Calling two smartforms in one Abap program
Hi ABAPers,
Can anybody know how to call 2 smartforms in 1 abap program?actually i used the FM SSF_FUNCTION_MODULE_NAME...and two smart forms are called...but my main problem is...the first smartforms is called and the print dialog box appeared...once i click the button back ...the second smartforms is called and print dialog box appeared again..
I want to correct this...i want this to be happen once i click the print button...the two smart forms will be combined in a one printing...meaning the first page is the first smartforms and the next page will be the second smart forms...no matter how many pages will be the first smartforms...the second smartforms will concatenate or will append to the last page of the first smartforms..how can i do this?
Please help...this is my sample code..kindly correct the error.
Will reward points...
suppressing the dialog box****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = space.
cparam-getotf = 'X'.
Call the First Smartforms *******************
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZSF_CHEQUE'
IMPORTING
fm_name = ly_formname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
CALL FUNCTION ly_formname
EXPORTING
prepared_by = p_prepb
approved_by = p_apprb
TABLES
it_cheque = it_final
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
Call the Second Smartforms *******************
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZSF_TSHEET'
IMPORTING
fm_name = ly_formname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
CALL FUNCTION ly_formname
EXPORTING
prepared_by = p_prepb
approved_by = p_apprb
TABLES
it_cheque = it_final
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
Thanks in advance
aVaDuDzhi,
i never used these function but i've found this link.
[http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/62ae7fcd-0b01-0010-3e9d-a54f26944450]
[http://help.sap.com/saphelp_nw2004s/helpdata/en/64/bf2f12ed1711d4b655006094192fe3/content.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/64/bf2f12ed1711d4b655006094192fe3/frameset.htm]
[SMartform printing;
hope that is useful.
bye
Marco
Edited by: nicolai marco on Jan 14, 2008 12:36 AM -
Two main windows in smartform or two loops in one main window?
Hello All,
I have requirement in smartform where i want to print two diffrent data header and item data in the same page.
and in between these two data i want one template to be printed for item data .
Smartform is giving me error if i use two main windows
if i use two loop nodes in the main window thn how to restrict the data getting over flowed to template(item data)
scenario is
header data****
**item header**
item data****
Pls comment....
Regards,
SunnyAs main window can only be one, so try it this way:
Under main window create a TEXT1 for header text( first header) than a LOOP1 for looping the header table, under that first create a TEXT2 for header data, than below it create another TEXT3 for header text ( Second header), than below it add a LOOP2 for looping item table and in that add a where condition than under it a TEXT4 for item data .
MAIN_WINDOW
TEXT1 " first header
LOOP1 " header table
TEXT2 " header data
TEXT3 " Second header
LOOP2 " item table with where condition
TEXT4 " item data
With luck,
Pritam.
Maybe you are looking for
-
Looking for a simple way to convert a string to title case
New to LiveCycle and Javascript. Looking for a simple way to convert a string to title case, except acronyms. Currently using the the following, it converts acronyms to lower case: var str = this.rawValue; var upCase = str.split(" "); for(i=0; i
-
PDF viewing online is faded in colour (blue)
I've encountered a fade out effect whenever I view a pdf file on the screen (online). I've tried to change the settings under general, but to no avail. Please advise. My firefox is of the latest version. Previous version was okay.
-
Composite photo and background layer question
I would appreciate some help with a workflow problem when dealing with a composite, selection and background layer. My normal workflow is to start of in LR4, and if need be do an "edit in, CS6". I am relatively new to CS6, so bear with me. I have som
-
Pull Price from basic Price List
Hi Experts, Could you help us build a FMS to populate item price in a marketing document from the basic price List (price list 1) if the price is blank, not found in the Special Prices and then in the assigned pricing list for a specific customer? Le
-
Problem with Creation/Code mode
Hi!! When I open dreamweaver, and any of the pages i am working on, it opens them into code mode and i cannot swap to creation or creation / code mode......the option is just not available anymore...can anyone help please? Many thankx