Calling WDA from IC Webclient

Hi All:
We are planning to build a WDA application and integrate with CRM IC Webclient application (BSP app).
Any ideas on how to integrate and pass the context data between the two applications?
Thanks a million!!

Actually I am planning on calling the WDA thru a url link in BSP (ICWC Nav bar). When users pick data in WDA that needs to be communicated back and trigger an event.
We already have BSP view(Agent Inbox ) doing what WDA is intended for, but users complain about performance, we think with WDA we can improve performance significantly.
Any suggestions?

Similar Messages

  • Calling WDA from BSP

    Hi all,
    Is it possible to call WDA from a BSP via a hyperlink and pass parameters that the WDA would need? How could I go about doing this?

    Hi Alexander,
       You can't pass the information(Context Data) from WDA to BSP directly so you just store the information in some variables or internal tables use the normal user paramenters like EXPORT & IMPORT or SET and GET parameters. Thgoruhg this way only you can communicate the data between these 2 technologies otherwise you need to save the data in some ztable and use the same table in both technoloes.
    you can also use Server Side Cookies.
    Perhaps take a look into this blog from Koen Labie:
    /people/koen.labie2/blog/2006/11/29/eating-cookies-with-webdynpro-and-bsp
    The blog shows how to pass the data from BSP to WD.
    Transfering data between WD and BSP via Server side Cookies can also be used for your requirement.
    For that you have to set the Data Cookie in the WD and then get the Cookie in the BSP.
    Please keep in mind that if you mix two different technologies you will have to deal with integration. WD and BSP will run in two different sessions at the server. Handling data exchange, login, logoff, data transfer at the server and client, etc can be challenging. You might end up with recreating enterprise portal-like software. So depending on the scope of the project, it might be more advisable to stay within the BSP environment or to reuse the SAP enterprise portal to integrate these two technologies at the client.
    Hope this will help you.
    Cheers,
    Darshna.

  • OrgChart: calling WDA from Details

    Hi guys,
    I have a specific need: call WDA from employee Detail. It should be able also to pass personnel number into WDA like parameter.
    Any idea, how to do that?
    Best regards,
    Sergey Aksenov

    Hi Sergey,
    Do you have any experience of using XSL or customizing VSN solutions? If not this might prove a bit tricky. You should try and use existing examples in the application. Meanwhile, I will try to help.
    2. Create file 'zhr_tmc_employee_profile.xsl' with content:
    <a href="http://myhost:myport/sap/bc/webdynpro/sap/zhr_tmc_employee_profile?PERNR={/cds/data/record/field[@name=PERNR]}&sap-rtl=&sap-accessibility=&sap-wd-configid=ZHR_TMC_EMPLOYEE_PROFILE">Press here</a>
    If this is the only code in the document then the document will not work. Look at other XSL documents in the Templates folder to understand how they work.
    4. Edit PresentationResources.xml in my build (.delta folder, and root folder of build as well). Added this:
    <presentation name="zhr_tmc_employee_profile">
    <file name="MyTemplates\zhr_tmc_employee_profile.xsl">
    Did you add the </presentation> tag after it?
    5. Change 'presentation' tag in my detail xml in folder Detailconfiguration, replace content with 'zhr_tmc_employee_profile'.
    What detail configuration are you using? The change should look something like this:
    <section enable="true" name="647308B3-0C68-4829-50AF-30C5668EDC40">          <fieldsetname>6abf642e58534f80942731270cb37b67</fieldsetname>
         <presentation>zhr_tmc_employee_profile</presentation>
    </section>
    Can you check the cds.log file after you open the details panel? The problem is likely to be the XSL file is not a correct XSL file.
    Best regards,
    Luke

  • Call WDA from ABAP via function module

    Hi WDA experts,
    is there any possibility to call a WDA within a ABAP report AND include it in the process.
    The best would be to call a WDA via a function module - make some inputs on the WDA side - press submit and the function module gives me the data from the webdynpro back to my application.
    I know that I can call a WDA via the function CALL_BROWSER, but in this case the WDA application is fully independent from the report and I am not able to post any data back to the report.
    I also know FM WDY_EXECUTE_IN_PLACE, but in this case I need a HTML container to display the WDA and there it seems that I also never get back any data back to the report.
    Any hints are appreciated.

    Not too hard:
    CALL WDA passing in a KEY on start plug.
    write the data to a shared memory object using the key passed as the
    key to a shared memort object on the submit.
    (see blogs on writing Shared maemory objects in ABAP)
    Then simply exit APP.
    On return read the data from the Shared memory Object.
    The shared memory object lives across the 2 sessions.
    cheers
    Phil.

  • Calling WDA from Microsoft .

    Hi Every body ,
    I want to call a WDA applcation from from Non- SAP portal .
    I want to call a WDA applcation from microsoft portal .
    Is it possible to call WDA in internet not in intranet .
    Thanks in advance ,
    Sethu

    Hi,
    Same req but,here i have to call the WDA application in the portal log on customization par file.
    com.sap.portalLogon.par --- bottonarea.txt i have a link i want to call the WDA application.
    here the link href="I have the application URL" but here we have to give host and port
    if that transfer to quality agin i have to chage... like that...production.
    Can you please provide me how to call WDA.
    how to get the host and port dynamically.if transport to quality dynamically to fetch that host and port by coding.
    i am thinking that is the way.
    If there is any solution please let me know.
    Thanks
    Ramkumar

  • How to call WDA from PCUI link.............

    Hi friends,
    I want to call a custom WDA from a standard PCUI button. Can someone tell me how to call this.
    Once the stndard button in PCUI view is clicked, my WDA has to be displayed.
    thanks in advance,
    Niraja

    Hi,
    As said by Thomas, the WDA is just like another HTML page with URL. So what you can do is Put an entry for the button in the action list. Then in application layout  put an entry for the new WDA application(specify it as popup). select the page type as HTML.
    This is more PCUI work than a WDA work.
    Thanks,
    selvakumar M.

  • Launch EXE file from IC WebClient

    Hi All,
    How can we call .exe file from IC WebClient.
    we want to launch the .exe file from the navigation into application work area.
    any suggestion would be great.
    Thanks,
    Raj.

    Hello Raj,
    The best way to do this would be with the Transaction Launcher. Depending on the version of CRM you are running, you might need to modify the handler class -- as some newer version of CRM seemed to append the http preface to the front of any non-URL file name. Of course, if your EXE program runs as a web application, you could just call the URL.
    Best regards,
    John

  • Calling report from form. Need PDF output

    I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
    Thanks

    Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
    win_api_environment.read_registry must be declared. Is there some package I need to attach?
    Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
    Thanks
    The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
    Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
    PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
    IS
    vcServerApp varchar2(40);
    vcServerTag varchar2(600);
    vcCommand varchar2(2000);
    iArgPos pls_integer;
    dummy NUMBER;
    BEGIN
    -- 1 get the Server App for .PDF files
    vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
    -- 2 get the executable
    vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
    vcServerApp||'\SHELL\OPEN\COMMAND';
    vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
    -- 3 Sort out how to specify the Filename
    iArgPos:= instr(vcCommand,'%1');
    if iArgPos = 0 then --no substitution Var on the command line
    vcCommand := vcCommand||' '||vFile;
    else
    vcCommand := substr(vcCommand,1,(iArgPos-1))||
    vFile||substr(vcCommand,(iArgPos+2));
    end if;
    -- 4 Run using Winexec (or Host if preferred).
    win_api_shell.winexec(vcCommand);
    EXCEPTION
    when no_data_found then
    abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
    END;
    Chad
    I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
    Thanks

  • Contact name not showing in call/sms log even when I call/sms from my address book.

    Two things have changed on my phone recently.
    1. I ran the latest update 4.3.2
    2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
    I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number.  This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
    I've turned the phone off and on a couple of times.
    I would appreciate any advice.
    Cheers

    Thanks iraghib,
    In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
    Good luck. And thanks for the post.

  • How can I access my Call Handlers from outside line (outside district)

    CISCO VoIP System Info:
    Cisco Unity Connection version: 8.6.2ES25.21900-25
    CM Admin System version: 8.6.2.21900-5 on C200M2 Servers
    Our engineer setup our Call Handlers so that in our to change the recordings on them, you diall 7800 from a phone inside the office, or as he put it in the procedures, from within the district.  Once you dial, you need to enter the user code, password, then the extension of the Call Handler, and we have no problems recording/changing any Call Handlers.  However, due to possible inclement weather approaching in the next few weeks, I was asked how we cna change them from an outside line (manager's home, etc.).  We cannot access from an outside line.  7800 is not a DID, it is simply the extension he assigned to access the call handlers.  I even went so far as to setup a dummy phone and forward it to 7800, but this does not work either.  It forwards to the extension's voicemail.  Is there a way we can access the Call Handlers from an outside line?  Any help would be gretaly appreciated.  Thank you in advance.

    Hey Joseph,
    Go Flames ....errrrrrrrrrrrrrrrrrr maybe not so much
    What you are trying to get to is really just the Greetings Administrator
    conversation and there are multiple ways to get there.
    For example, you can set up a Caller Input off any mailbox (Press 1-9) let's say 7 to
    go to Conversation> Greetings Administrator. So you could set this on the managers mailbox
    and when he calls his own number from home once his greeting
    kicks in he can press 7 to link to the Greetings Administrator conversation
    or
    You could set up a DID DN xxx-xxx-2345 as a CTI-RP and set Call Forward All to reach Unity Connection.
    In this case you will need to use the Forwarded Routing Rules = xxx-xxx-2345 route to
    Greetings Administrator. Make sure to move this rule to the bottom of the list!!
    Cheers!
    Rob
    "Why do the best things always disappear " 
    - The Band

  • Call tcode from alv report and passing  group of values

    hi all .
    i want to call tcode from alv report and passing an internal table or group of values to a selection option of that t code ? how
    ex. passing group of GL to fbl3n and display the detials of all .
    thank you

    Dear,
    You have done a small mistake
    --> rspar_line-option = 'EQ'.
         rspar_line-HIGH = PDATE-HIGH.
    u r passing "high" value and in "option u r passing "EQ" so how it will work!!!
    So if u r passing only 1 date or more dates like 01.01.2010 , 15.02.2010 , 10.03.2010 then pass
    rspar_line-selname = 'SO_BUDAT'.
    rspar_line-kind = 'S'.
    rspar_line-sign = 'I'.
    rspar_line-option = 'EQ'.
    rspar_line-LOW = PDATE-HIGH.
    APPEND rspar_line TO rspar_tab.
    or if u r passing low & high date means in range like 01.01.2010 to 30.01.2010, then pass
    rspar_line-selname = 'SO_BUDAT'.
    rspar_line-kind = 'S'.
    rspar_line-sign = 'I'.
    rspar_line-option = 'BT''.
    rspar_line-LOW = PDATE-LOW.
    rspar_line-HIGH = PDATE-HIGH.
    APPEND rspar_line TO rspar_tab.
    try above code , hope it helps...
    i think u cannot use "call transaction using bdcdata" in ur case bcoz as u said in ur 1st post u want to display the details of all but still if u want to use then u should pass all parameters in  loop.
    PROGRAM
    DYNPRO
    DYNBEGIN
    FNAM
    FVAL
    ex:-
    LOOP AT GT_TEMP INTO GS_TEMP.
    CLEAR bdcdata_wa.
    bdcdata_PROGRAM = 'SAPXXXX'.
    bdcdata_DYNPRO = '1000'.
    bdcdata_DYNBEGIN = 'X'.
    bdcdata_wa-fnam = '''.
    bdcdata_wa-fval = ''.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_PROGRAM = ''.
    bdcdata_DYNPRO = ''.
    bdcdata_DYNBEGIN = ''.
    bdcdata_wa-fnam = 'SD_SAKNR'.
    bdcdata_wa-fval = GS_TEMP-GLACCOUNT.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_PROGRAM = ''.
    bdcdata_DYNPRO = ''.
    bdcdata_DYNBEGIN = ''.
    bdcdata_wa-fnam = 'BDC_OKCODE'.
    bdcdata_wa-fval = 'XXX'.
    APPEND bdcdata_wa TO bdcdata_tab.
    ENDLOOP.
    try above code if u r using call transaction...
    Edited by: mihir6666 on Jul 9, 2011 3:10 PM
    Edited by: mihir6666 on Jul 9, 2011 3:11 PM
    Edited by: mihir6666 on Jul 9, 2011 3:13 PM

  • I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

    I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball).  Using 10.6.7 and up-to-date on all software. Any suggestions?

    Could be a third party app preventing you from being able to login.
    Mac App Store: Sign in sheet does not appear, or does not accept typed text
    If it's not a third party issue, follow the instructions here.
    Quit the MAS if it's open.
    Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
    Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
    From the same Library folder open the Preferences folder.
    Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
    Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
    Relaunch the MAS.

  • Calling Report from Menu (Oracle Forms 10g)

    We have the applications in Forms6i & Reports 6i (Client Server) and migrating to Forms 10g and Reports 10g. We have the menu, from that menu we are calling all the forms and Reports. For especially Reports earlier we user RUN_PRODUCT but now 10g it is not working. How can call the report using RUN_REPORT_OBJECT
    Important things we have some dynamic parameters (input) to the each report. That means when i called the report from the menu i need to get first parameter form to take the parameters and then can be run the report.

    Here is the code to call report from menu in 10g
    DECLARE
    pl_id ParamList;
    repid REPORT_OBJECT;
    v_rep varchar2(100);
    v_server VARCHAR2(100);
    rep_status varchar2(100);
    v_host VARCHAR2(100);
    BEGIN
         select rep_server into v_server from reports_data;
         select machine into v_host from reports_data;
    pl_id := Get_Parameter_List('tmpdata');
         IF NOT Id_Null(pl_id) THEN
         Destroy_Parameter_List( pl_id );
         END IF;
         pl_id := Create_Parameter_List('tmpdata');           
    Add_Parameter(pl_id,'P_C_CODE',TEXT_PARAMETER,:GLOBAL.COMPANY);
    Add_Parameter(pl_id,'P_B_CODE',TEXT_PARAMETER,:GLOBAL.BRANCH);
         repid := find_report_object('REPORTOBJ');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,getpath||'E_VOUCHER_ENTRY.RDF');
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'htmlcss');
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,v_server);
              v_rep := RUN_REPORT_OBJECT(repid, pl_id);
              rep_status := REPORT_OBJECT_STATUS(v_rep);
              WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
                   LOOP
                        rep_status := report_object_status(v_rep);
                             message('Running');
                   END LOOP;
              IF rep_status = 'FINISHED' or rep_status is NULL THEN
                   --Display report in the browser
                   WEB.SHOW_DOCUMENT('http://'||v_host||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_server,'_blank');
              ELSE
                   null;
         END IF;
    END;

  • Want to call transactions from ALV list output

    Hi Guru's,
    I have a report which displays Open PR's, open PO's n their details with respect to material. wat i want to do is call transactions from this out put i.e i want a interactive output. if i click on particular PR i want the system to call that PR screen. how can i do this?? Plz help.

    REFER THIS
    EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
      I_CALLBACK_PROGRAM             = ' '
      I_CALLBACK_PF_STATUS_SET       = ' '
      I_CALLBACK_USER_COMMAND        = 'USER_COMMAND '
      I_STRUCTURE_NAME               =
      IS_LAYOUT                      =
      IT_FIELDCAT                    =
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
      I_SAVE                         = ' '
      IS_VARIANT                     =
      IT_EVENTS                      =
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
      IR_SALV_LIST_ADAPTER           =
      IT_EXCEPT_QINFO                =
      I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
    EXCEPTIONS
      PROGRAM_ERROR                  = 1
      OTHERS                         = 2
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      TABLES
        T_OUTTAB                       =
    IF SY-SUBRC <> 0.
    ENDIF.
    AND THEN
                     rs_lineinfo type slis_lineinfo.
    FORM user_command5 USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    data : lv_date type char4.
    CLEAR : LV_DATE .
    CASE r_ucomm.
    WHEN '&IC1'.
          IF rs_selfield-fieldname = 'BELNR'.
        read table it_e into wa_e index rs_selfield-tabindex.
        if sy-subrc = 0.
        lv_date = wa_e-budat(4).
        endif.
        SET PARAMETER ID 'BLN' FIELD rs_selfield-value.
        SET PARAMETER ID 'BUK' FIELD s_bukrs-low.
        SET PARAMETER ID 'GJR' FIELD lv_date.
        call TRANsaction 'FB03' AND SKIP FIRST SCREEN.
        endif.
        ENDCASE.
    ENDFORM. "user_comm

  • How to call servlet from jsp

    i m trying to call it from jsp using
    <a href="../purchaseP?orderno=<%=pno%>"><%=pno%></a>
    but its giving error..
    type Status report
    message HTTP method GET is not supported by this URL
    description The specified HTTP method is not allowed for the requested resource (HTTP method GET is not supported by this URL).

    i m trying to call it from jsp using
    <a href="../purchaseP?orderno=<%=pno%>"><%=pno%></a>
    but its giving error..
    type Status report
    message HTTP method GET is not supported by this URL
    description The specified HTTP method is not allowed
    for the requested resource (HTTP method GET is not
    supported by this URL).Are you implementing the doGet or doPost method in your servlet? If you are calling from a hyperlink then it needs to be implementing the GET method. To access the POST method use a html form.

Maybe you are looking for