CAM reports: Lost OOB communication

In CAM, under Storage System Summary page, Health is shown as "Lost Communication". After few minutes, the status changes to "OK".
When I click on the array in the left pane, the right pane shows: "A system error occurred. Retry the operation. If this message persists, contact your Technical Support Representative.".
A few minutes later, it shows: "Application Error
javax.servlet.ServletException: The request was not handled by the specified handler "[email protected]"
Notes for application developers:
* To prevent users from seeing this error message, override the onUncaughtException() method in the module servlet and take action specific to the application
* To see a stack trace from this error, see the source for this page"
There are thousands of events registered of Type "Lost Communication" & "Communication Established" for the "OutOfBand" component. Each at a gap of few minutes.
What could be the problem?
thanks.

HI
I am also getting the same "lost communication error" in CAM and i upgraded to latest version 6.1 also.But in my case still the problem persists.So how i can proceed this.And very strange! in Solaris CAM version only this problem.
In a windows host it is working fine.one morething in both case a cross cable from storage to solaris host(without a switch) it is working fine.

Similar Messages

  • So I bought a phone off some one and it happened to be reported lost and I need the previous owners icloud to unlock it. what can I do?

    so i bought an iphone 4s off some one and it happened to be reported lost and i need the old owners icloud info to unlock it. what can i do?

    almightyrollin wrote:
    ive contacted the old owner he isnt willing to do it because he said its my problem and he cant trust me. is there any other way like taking it to the apple store?
    As you've already been told...NO.

  • HT201472 Can it be determined if a device has been reported lost or stolen?

    Looking to buy a used iPad, but need to know if there is a way to determine if sale is legitimate or if unit has been reported lost or stolen.

    I'm not sure about everyone else, but every Apple product I've ever bought I have kept the reciept for. That goes for all my electronics and valuables. I keep them for many reasons, one of them being to PROVE that it is my product in case someone tries to steal it.
    Ask for a reciept. If one can't be provided then I would remain hesitant.

  • HT201441 i just bought a ipod touch off craigslist & it has been reported lost or stolen

    i just bought a ipod touch off of craigslist that has been reported lost or stolen...what can i do?

    Type "move itunes library" into the google search bar.

  • LMS Reporting Complete when communication is lost

    The LMS we're using, eLogic, reports a SCORM course as Complete if the communication is lost. This was happening on a regular basis as associates began to use online training for the first time. So we requested that it leave the course as Incomplete so the user could re-open more easily. We've been told that this does not conform to SCORM standards that say if communication is lost that the course be marked as Complete. That makes no logical sense to me. Can anyone explain? Or help me to understand?
    Thanks!

    I think this really has more to do with how your lesson is sending the status. It's the lesson that, ultimately, should decide if the lesson is complete or not. However, that status is not 'definite' until the LMS.commit function is called. Once that's called, then any data that's been sent back to the LMS is official.
    So ideally, your CP lesson should not send a Completed status until the user has finished whatever tasks are required to gain that status (all pages viewed, certain interactions finished, etc)...then when the user exits the lesson, CP sends the Commit and Finish calls and the LMS finalizes that lesson.
    It sounds like this LMS is doing some sort of default action where, perhaps, if communication is lost with the lesson or a timeout is reached, it automatically commits the status (which CP should have sent). So first:
    1. Is your CP lesson sending the status properly? Is it sending Completed as soon as it opens? That's a common issue... If so, the LMS could be receiving the status correctly, but acting on it incorrectly by commiting that status when it should not be.
    2. Is the LMS taking a default action, like setting a status to Completed, when the API communication is lost? Which, I agree, sounds like a bad assumption to make and is doubtfully a SCORM requirement.
    HTH
    Erik

  • Report Lost iPad2

    Hello guys,
    Recently I've lost my iPad2 in the public.
    It was my own mistake to leave my iPad on the table and forget to hold it all the times in my hand.
    When I realized that I'm not holding my iPad after few minutes, it's gone from the table.
    I've did my best to find it and report it to any available enforcement in this issue. But there's not much hope to find back.
    Instead of leaving things be done, is there a way to report it to APPLE SUPPORT that my iPad is lost?
    And I had used the iCloud.com to send message to my iPad, and locked my iPad. *Didn't wipe it
    So if any possibility that my iPad is taken by the stoler to repair in any Apple Store, Apple Support will track down the serial number and return to me.
    Product Details:
    iPad 2 Wi-Fi White
    Serial number: DQTH868YDKPH

    Unfortunately Apple does not track lost or stolen products.  Look here for further information.

  • Apex 4.0.1 Interactive Reports lost after application import

    Hello, After importing the application, in order to upgrade it (using the same app id across environments), users' saved Reports were lost. I've read former posts regarding this issue, but they were pretty old (from 2008/2009) and refer to Apex 3.2. Has anyone experienced this problem with 4.0.1? If so, is there a fix or way to work around it? Thank you.

    Hello, After importing the application, in order to upgrade it (using the same app id across environments), users' saved Reports were lost. I've read former posts regarding this issue, but they were pretty old (from 2008/2009) and refer to Apex 3.2. Has anyone experienced this problem with 4.0.1? If so, is there a fix or way to work around it? Thank you.

  • Interactive Reports Lost

    It would appear that when a new Apex application is installed the Interactive Reports preferences are reset and any saved reports are lost. Am I doing something wrong or is this a feature of Interactive Reports.
    Cheers
    Shunt

    Resurrecting/Bumping this thread.
    I tried David Peake's advice on this but drew a blank.
    Here's where I am with this.
    Server 1: DEV & UAT environments
    Server 2: Production & Demo environments
    DEV APP_ID = 127
    DEMO APP_ID = 555
    I created a copy of 127 and assigned it the 555 ID during the 'copy' process.
    I then exported App ID 555 from server 1 and imported it into server 2 following David's instructions.
    +"select "Install As Application:" option of 'Reuse Application ID xxx From Export File', not 'Auto Assign New Application ID' or 'Change Application ID'"+
    Sadly, you guessed it, the user saved IRR reports are no more.
    Has anyone cracked this?
    Can anyone see what I may be doing wrong?
    Any help appreciated.
    Like many people here, I have lots of users with carefully crafted IRR regions. I don't want to be the one to tell them they have to re-create them.
    There HAS to be a way to save them.
    Thanks
    Simon Gadd

  • Filds in the report losted the configuration suddenly

    Post Author: pandalucas
    CA Forum: Crystal Reports
    Hi, I'm brazilian, and I'm using the Visual Basic 6.0 and Crystal Reports 8.5 and I have one serious problem:
    I emit bill of sales with this program in one matrical printer and after I print in the visualization the bill of sale is shown correct  but when I print the bill of sale in the printer the filds appeared overlapped. It was functioning perfectlly and started to shown problems suddenly.
    Anybody can help me?
    Thanks
    I'm waiting for the reply

    Hi,
    I would ask the following questions to verify the issue:
    1. Does the issue happen on all the reports?
    2. Does the issue persist if you open it in the other web browsers?
    2. What’s the version of your Reporting Service and Internet Explorer?
    Please post the image of the issue, so we can understand the problem in more details.
    You can use &rc:Toolbar=false parameter to hide the toolbar in the Report Server.
    The following articles are helpful:
    URL Access (SSRS)
    http://msdn.microsoft.com/en-us/library/ms152835.aspx
    SSRS Remove Menu in Web-Page
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a6f2899b-a8bb-41a2-880c-0b302907161c/ssrs-remove-menu-in-webpage
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Camera driver lost on IPAD3!!!

    after upgrading to iOS6 I lost the camera driver of my IPAD3 ..... the message comes: "your device does not have camera"... or something similar!!! Does anyone got this problem before?

    Check your Settings > General > Restrictions : should be disable > Camera: ON?
    If it's correct,
    do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.
    If no joy, do a restore from backup using iTunes.
    Lastly, do a restore as new without the backup.

  • Camera Icon on IP Communicator

    IP Communicator and Video Advantage 2.0(2). I have video enabled the IP Communicator in Call Manager and reset but can not get the Camera Icon to show up. Video Advantage indicates that it does not recognise that IP Communicator is present. Any ideas?
    Thanks!
    Steve

    Have you enabled video in the IP Communicator profile same as you would for an IP Phone. If the option is not showing you need to down;oad the latest Dev Pack from CCO

  • How to report lost

    how do i report my device lost? And how to track it down?

    Welcome to the Apple Support Communities
    The only way to track the device is using "Find my Mac", which allows you to track, lock or wipe your iPhones, iPods touch, iPads or Macs where you turned it on.
    If you turned on Find my Mac on the MacBook Air, open http://www.icloud.com, log in with your Apple ID and select "Find my iPhone", so you will be able to track, lock or wipe the computer. Note that it must be connected to the Internet in order to be able to track it. If you lock or wipe your MacBook, the action will be done the next time it's connected to the Internet

  • Blackberry 8900 Malfunction - lost camera icon, lost Twitter, lost Facebook :-(

    I don't know much about Blackberries except that I love mine! I have had mine for 15 months without incident - recently I downloaded Twitter and Facebook from Blackberry App World and everything was hunky dory.
    Today I went to answer a call and a message flashed up (all I caught of it was app error) then went to a white screen. After foooorever, I did a battery pull and when it rebooted, all I got was the 02 screen.
    I turned off and turned back on my device and it all came back to life except:
    1. The error "uncaught exception java.lang.NullPointerException appeares and
    2. I lost my email icons, Facebook, Twitter and Camera icon
    Since then I checked for updates (apparently I am completely updated) and restored my Blackberry and as a result, I have got my email back but not the camera icon (although I can access it via the Media icon) and I cannot get Blackberry App World, Facebook or Twitter (despite the Application Loader saying they are on my Blackberry).
    Can anyone please help me get the App World, Facebook and Twitter back without crashing my Blackberry again?
    Device info
    Your carrier: 02
    Model info and OS version (Go to Settings, then Options, then about): v4.6.1.133 (Platform 4.2.0.85)
    Apps and free space
    File free before and after a battery remove/replace. (Go to Settings, then Options, then status): Battery 100%
    File Free: 120124042 Bytes
    Did a battery pull fix your issue?  No

    Swipe down anywhere on the home screen to reveal spotlight search, then type in the name of the app to search for it
    You can also go to settings/general/reset/reset home screen layout

  • IPhone Reported Lost by the Seller!

    Hey, I bought an iPhone 4 off someone, after purchasing it, a couple weeks after (while waiting for it to be Unlocked by Vodafone) the Seller admitted that he rang and reported it 'lost' so that it would get Blacklisted so i'd return it back to him.. so he could then sell it for more!!! (arsehole!)
    Well, it isn't lost, I bought it off him via PayPal...
    I think its a little ****** what he's done, but is there any way I can get this iPhone 'unblacklisted'?
    I've been trying to get a hold of 1 for awhile now to replace this 1 but the 2 I purchased.. the Sellers were complete time wasters!!
    so im still trying to get one, so I can send this 1 back to the arsehole... but having no luck yet,
    I wanted to purchase via Apple but most of my money is in my PayPal Account and it takes days to transfer to my Bank!
    (as Apple dont accept PayPal Payments)
    So yeah.. is there any way Apple can unblacklist it?
    thanks.

    I've bought hundreds of items on eBay, no problems at all with anything, and not really any problem with this, it's jus that he was selling it, I bought it, but then he noticed the eBay Fee which was like £30+ (cant remember exactly)... all of a sudden I woke up once morning and noticed No Service, so I emailed Vodafone and they said it had been reported stolen... so obviously I contacted the Seller and he said he reported it lost so i'd send it back to him :-/ weird guy!!! but yeah I opened a Dispute on PayPal but they gave me until the 31st to send it back, well... i've not been able to get my hands on a new 1 yet so cant send this 1 back yet! pain in the backside as I need 1 on me at all times because of work... once I post this 1 off and supply the Tracking Number on PayPal (after I open another Dispute) they'll Refund me the money, but was just wondering if there was anything I COULD DO to get it off the Blacklist, never mind though, thanks anyway.

  • Parts of string lost while communicating with Arduino.

    While communicating with arduino, the string I receive from arduino is buffered but it isn't totally read by LabVIEW
    and some information is lost, changing the data I plot. Anyone knows how to solve this problem?
    Maybe useful information:
    Arduino mega
    Baud rate: 19200
    Loop delay in Arduino: 10 ms
    The string is composed by 3 integers values concatenated like this:
    gh123ab123cd123ef
    I´m attaching the Vi.
    Thx very much!
    Paulo
    Attachments:
    Labview-LETE.vi ‏34 KB
    Labview-LETE.vi ‏34 KB

    Duplicate Post.

Maybe you are looking for