Camera connector kit cck

Purchased a new iPad (3rd gen) and the CCK camera connector kit. But, iPad and connector not communicating. It will not read any SD card. I tried a standard SD card, a SDHC micro in an adapter and a standard SDHC-nothing. Imagines are all jpeg from Canon digital camera or other sources. I don't even get what the manual calls a camera icon/tab. Any help is appreciated.

The naming quirk is, unfortunately, something that you do have to discover. I tried to do a lot of research and ended up findinig it out on my own.
Now I have been able to use it to import home made movie files - thus kinda expanding my viewing options with the simple investment of some larger capacity SD cards and  the limits of the naming convention, but it does have that shortcoming. They are not very good at spelling out any limitations and jsut seem to operate under the presumption that every camera out there uses the DCIM folder, 8 character name style.

Similar Messages

  • Can i Use The Apple Wired Keyboard With Camera Connector Kit

    Can i Use The Apple Wired Keyboard With Camera Connector Kit
    3g 64gb verizon

    People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message.  (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.)  Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub.  At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
    And wired USB keyboard were never supported for the iPad.  So there's no guarantee that it will continue to work with future iPad updates from Apple.  So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use.  If you have all the equipment already, I say give it a try.  But I would not recommend trying a USB keyboard if you have to purchase anything.

  • Camera connector kit not working at all

    Hi
    I bought the camera connector kit and can't get it to work.
    I don't really use the camera to take photos or shoot videos. I bought the kit mainly to add storage to my brand new iPad (3).
    What I have tried to do so far, is:
    - create a DCIM folder on a USB stick AND on an SD card
    - copy .jpeg and H.264 video encoded files in those folders
    - insert the different connectors in the iPad
    - with the 32gb USB key, I got a message "not enough power"
    - with a 4gb USB key, all I got was " no photo to import"
    - with the SD card, once again, "no photo to import"
    So, basically, nothing works. Am I doing anything wrong or is there something else I could try.
    Thanks

    I bought the kit mainly to add storage to my brand new iPad (3).
    The CCK can only be used to import photos/videos to the iPad. Can't be used to export photos/videos or other files, or use like an external hard drive.
    Are you opening the Photos app when you try to import the photos & are they identified as .jpg?
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

  • Importing photos to my ipad via the camera connector kit  How do I do this

    I cannot import photos to my ipad via the camera connector kit The photo app does not say import anywhere  How do I do this

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • Problems with iPad camera connector kit

    I used the camera connector kit yesterday with my sd card and it worked fine. I have tried to use it again today and it comes up with Contents not available, cannot read the connected storage media. Any suggestions as to how to get it to work?

    How are the photos getting onto the card, directly from the camera or are you copying them onto the card from your computer ? If you are copying them onto the card then you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them.
    If the card has come straight from the camera then try a reset of the iPad and see if the photos are then recognised : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Can anyone help me move video from Sony HDR-XR550 to ipad 3gs via camera connector kit?

    Can anyone help me move video from a Sony HDR-XR550 to ipad 3g via camera connector kit?

    You can use iPhoto for the import. iLife apps are integrated. From within iMovie you have direct access to iTunes for adding music, and iPhoto for photos and videos in the iPhoto library.
    Or you can use the Image Capture application for the import if you prefer placing such imports into manually created folders and not using iPhoto.

  • D800 file compatibility:  Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit?  I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

    Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit?  I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files. 
    I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
    I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
    Any advice appreciated?
    PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
    If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

  • HT4101 Camera connector kit not working with ipad3. Not at all able to see any photo . Have tried both the USB connector directly with camera and thru card reader. Tried by copying photos to DCIM folder also.

    Got a iPad camera connector kit. It is not working as expected. It is not able to read any photos. Both the USB connector and sd card reader arenot showing any photos on iPad. Tried copying all photos directly in DCIM folder. Still no result.
    Any other setting needs to be changed?

    Hey, thanks for your updates.
    The photos are 8 character long and extension is .jpg
    The file names are 8 characters long with 3 as alphapet followed by an "_" and then 4 numbers.
    Initially the photos were in a folder inside DCIM folder. I manually copied them to DCIM folder, still no result.
    Can you advice.

  • Camera Connector Kit and SONY Digital camera MP4 files

    Using the Camera Connector Kit I am able to copy SONY Digital camera MP4 files. I am unable to play it on the iPad. I have tested this on 4.2 and 4.3GM of iOS.
    With more and more people using iPads this type of functionality should be working.

    I agree. Why not formally suggest it to Apple since Apple really does not read/use posts from this forum.
    http://www.apple.com/feedback/ipad.html

  • Camera connector Kit and iOS 4

    My iPhone 3G running iOS 4 no longer transfers photos to my iPad using the camera connector kit. Any similar or dissimilar experiences with any type of iPhone and the camera connector kit?
    Dan

    The camera connection kit uses Bluetooth drivers. That's why unexpected things like microphones work. I had to turn on Bluetooth for the wired connection to work between my iPhone and my iPad. I learned this on a podcast with Andy Ihnatko.
    Dan

  • Will Apple Camera Connector Kit Import .PDF files?

    Will Apple Camera Connector Kit Import .PDF files? I need to import large (60MB plus) .PDF files created in Powerpoint to my iPad. They are too large to be practical for e-mail.

    Open GoodReader on the iPad. Click on the wifi icon in the menu bar at the bottom of the app. A popup window will open up giving you your local URL. Open Safari on the desktop computer and place that URL in the address bar. A page will open up with directions on how to send a file. The file will be send over the wifi connection to your iPad.
    To add a little... In Safari on the desktop computer. Select file to upload: Choose file--->Navigate to the file on your desktop computer---> Click on the Upload selected file button. There will be a red warning box in the popup window on the iPad. When that disappears the the transfer is complete. If you get a warning can't find page in Safari you don't have the wifi connection in Goodreader turned on. Just click on the wifi icon button in Goodreader to fix. You can bookmark the URl in Safari fir later use. 

  • Camera Connector kit

    Is there a camera connector kit for the i pod touch? can you use the camera connector kit for the ipad on the itouch? are those connections/connectors on the bottom of the ipad the same as the ones on the itouch?

    I saw a company pre-selling a third-party camera connector kit a few months ago, but darned if I can't find that website now (frustrating!). I recall it was something like $89 US.
    I would love to have an SD card transfer kit, particularly since Apple now sells one for the iPad. Having one for the iPod Touch would be great.

  • Camera connector kit as USB port?

    I'm looking at purchasing the camera connector kit for my father who wants to be able to use a USB port with his iPad while he's on an extended trip.
    My hope is that the USB port would allow him to download pictures/files onto a flashdrive and also use a mouse.
    Based on what I've read I'm not sure if that will actually work. Does the USB port from the camera connection kit actually function as a "real" USB port?
    Thanks.

    When the iPad 1 and camera kit first came out folks discovered that the USB port was usable for a number of "secret" devices from keyboards to speakers. With the 4.2 iOS update, Apple reduced the power available with the camera kit and folks report that it barely allows transfer of photos from attached cameras now.
    Dah•veed

  • IPad 2wifi, and camera connector kit problem

    My iPad camera connector kit is not importing all the photos onto my iPad, with some pics it's, placing an exclamation mark rather than a tick, why is this happening?

    I would suspect there is something going on with the SD card the iPad is not liking. Try to transfer all the photos to a computer which may be better at reading the card. Once you have verified all the photos are safely copied use your camera to format the card. This will wipe it completely and set it up again which can fix any formatting issue the card may have. If you see this issue again I would not trust it and get a new card.

  • IPad's camera connector kit to use a USB DAC on iPod?

    I understand that the iPad's camera connector kit can be plugged into an iPad to use a USB audio interfaces such as an external DAC. Will this be possible with an iPod 5.5G?

    According to previoss reports, it does not work with an older iPod. However, there may be other third party products that offer this functionality for your older iPod.
    B-rock

Maybe you are looking for

  • Mini 1010nr USB not working

    I have a HP Mini 1010nr running ubuntu 10.10 and none of my USB ports are working. I have checked if it is an OS problem and its not. the USBs are not even showing up in the bios. I know there are bios updates available but I cant flash my bios becau

  • Can't find DAQmx Create Task.vi and lots of other VI's

    Hello, I have the problem that appears in the subject. I have the LabView2012 version on my computer, and I also downloaded and installed the NI-DAQmx9.4  but I can't run the project correctly because of those missing VI's. Please, any help is much a

  • How to disable keyboard

    How can we disable the system keyboard and mouse(not for particular application)for certain time using java.But at the same time i want to use arrow keys for scrolling my documents up and down.

  • Nokia X1-01 Cell Info Display Problem

    My X1-01 sw version 05.27 ,26-05-11,RM -713, Language: MG The problem is that it does not display Cell Info display correctly. Only few times it shows, But only for sometime. Is this bug fixed in the latest version 5.44 ???? and it also has the signa

  • New laptop itunes query!

    I have just bought a new laptop and would like to know if there is a way i can get my existing itunes library on my old laptop to appear? Also when I plug in my iphone4 it says it is already registered on another device ~ How do I unregister & re-reg