Camera Raw files not opening.  I've updated the latest plug-in.  I've uninstalled & re-installed photoshop.  Could I have removed a necessary file when cleaning up programs?

I've installed bridge and they don't open in that.  I cleaned up my programs and removed a bunch of unnecessary junk, could I have removed something I needed?  The camera raw files are CR2 from a Canon D6.
I've spent far too much time trying to figure this out, so any suggestions are much appreciated.
Thanks!

Thanks, Barbara, that did the trick!  I deleted the old file rather than renaming it.  I was in fact trying to install 5.6.
Cheers,
Marcos

Similar Messages

  • I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.  The bridge no longer shows the picture view of my NEF files.  These are Nikon NEF files from the Nikon 5100 DSLR camera.  How do I fix this?

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.
    When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
    Camera Raw plug-in | Supported cameras
    The D5100 was first supported in Camera Raw version 6.4.
    In Photoshop, click Help > Updates to update Camera Raw.

  • Changes I make in camera raw do not show up or update in bridge.

    Greetings.
    I’m working in PS CS4 in XP(government).
    Changes I make in camera raw do not show up or update in bridge.
    These images DO process with the changes when I run my actions.
    For example: Open images in bridge. Edit. Open reaming images in camera raw. Push the images two stops in camera raw. Close camera raw. Images in bridge show no change. Run action to turn raw files into psd. Final PSD appear pushed two stops.
    Purging Cache make no difference.
    Thoughts?

    You are using Embedded thumbnails.  These are small and fast, but do not show raw edits.
    You need to use one of the HQ thumb options to see the edits.

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open?

    Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open? Is this a common issue?

    Hi Madhattanite,
    Welcome to the Support Communities!  When did you purchase your Mac?  The first thing I would suggest is to review the information in the resource below for the Up-To-Date Program for Pages, Numbers, and Keynote.
    Once Yosemite is installed, you should have the option to Accept the Pages, Numbers and Keynote apps in the Mac App Store Purchases pane.
    Apple - Up-to-Date Program for Pages, Numbers, and Keynote
    I hope this helps ...
    - Judy

  • Camera Raw - will not open raw files from a supported camera

    does anyone know a solution for camera raw to recognize my raw files, I just upgraded to cs6 and it is a supported camera. I've updated and it still won't work any solutions?

    I should have asked which OS version do you have on the Mac?  The current ACR plug-in requires 10.7 or newer and if you’re still on 10.6.x then the updater might not do anything because your OS is too old.
    The first thing to try is Help / Updates and see if there is a newer version.
    If that doesn’t work, then you can manually install ACR 8.3, the last version compatible with OS X 10.6.x, from here:
    https://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html
    And if your OS is new enough, then you can install whatever the latest version (currently ACR 8.7.1) from here:
    https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

  • Camera raw is not opening in PSE 11

    I just installed PSE 11 from Adobe.com and my raw files do not open in camera raw?

      Can you check that the latest plug-in is properly in stalled. On the Editor menu go to:
    Help >> About Plug-in >> Camera Raw
    You should see this screen. Press Esc to close.

  • Purchased new camera nikon d7100 and camera raw will not open any nef files, talked to tech support and they assured me an update would fix issue, did update and have  same issue still

    I have photoshop cs5 and after purchasing a nikon d7100, photoshop will not open any of the nef files like it did with my nikon d90, I contacted support and they assured me after update that issue would be resolved...still not resolved, any suggestions?

    Good day!
    Please check this list to see which version of ACR supports the camera:
    Camera Raw plug-in | Supported cameras
    Then please check your version (Photoshop > About Plug-In > Camera Raw).
    As you should see your version is not up to the task.
    You can either buy a license for a more current version of Photoshop (CS6 is still available) or switch to the … Cloud License model or use the free DNG Converter.
    Regards,
    Pfaffenbichler

  • Camera Raw does not open raw NEF files from D800

    I just got a Nikon D800. I have been useing Photoshop CS4. Bridge cannot "see" the raw files, Camera Raw cannot open them so of coursed PS cannot open them either. Updating did not make a difference. Is there an upgrade that will see the raw files?

    You need CS6.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

  • Camera Raw will not open my Canon 7D MarkII raw files

    Hello! I recently got a Canon 7D Mark II for Christmas and took my first photo today. When I try to open my RAW file in photoshop it says it cannot open that file type, check to make sure  your updates are current. I did this and it says they are for both Bridge and Photoshop. I checked to make sure my camera is on the list for compatibility and it is. Do not know what else to do. I have a PC and Adobe Photoshop CS6. Any help would be greatly appreciated! Thanks!

    You need ACR 8.7.1 to support your 7D Mark II. Here is the link: https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
    Benjamin

  • Camera Raw Will Not Open .CR2 Photo Files

    I use Photoshop 7.0 with a Windows Vista operating system. Camera Raw in Elements will not recognize the Canon .CR2 Raw photo files that I download from my Canon 50D using a card reader. I even downloaded the new Camera Raw 5.1 from Adobe with the same results. Any ideas?

    Indeed, I stand corrected:
    Windows:
    Photoshop Elements 6.0 and 7.0: Camera Raw 5.x
    Photoshop Elements 5.0: Camera Raw 4.6
    Photoshop Elements 4.0: Camera Raw 3.7
    Photoshop Elements 3.0: Camera Raw 3.6
    Macintosh:
    Photoshop Elements 6.0: Camera Raw 5.x
    Photoshop Elements 4.0.1: Camera Raw 4.6
    Photoshop Elements 3.0: Camera Raw 3.6
    (The following page can be confusing, with versions of ACR intermingling with versions of PSE, and different versions than the headings being listed.)
    http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows

  • Nikon camera RAW will not open in PS CS3 on Win 8

    I have photoshop CS3 extended ver 10 and Elements 6.  I installed both on a new PC with windows 8.  PS will not open my RAW files taken with my Nikon D40X although Elements will.  PS opens tiff and jpeg.  I went to Adobe updates and tried to install ACR 4.6 (Camera raw 8bi.)  The Error message for bothe the opening RAW files and installing the update is, "Could not complete your request because it is not the right type of document." I uninstalled PS and Elements and reinstalled just PS.  Same problems. I transfer the RAW files from my camera to computer by copying them through a card reader. 
    Thanks for any help.

    PS and PSE each have a different place to put the  .8bi file, so manually do the updated according to the instructions for each product on this page:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Re-installing PS or PSE will revert the ACR plug-in for that software back to the oldest version that originally came with that version of software so you’ll need to update using the contents of the ZIP file, again.
    You can do a Help / About Plug-in… / Camera Raw… in PSE and PS to see what version you have installed in each.  Plug-ins are scanned at startup, so you’ll want to restart each product after doing the manual install.

  • CS4 Camera Raw Does Not Open With Lightroom 3

    Hi everybody,
    I have the following equipment:
    iMac OSX 10.7 Lion
    Photoshop CS4
    Lightroom 3.6
    Camera Raw 5.7
    All SW has the latest Patch.
    When I open a Canon CR2 out of PS, the Camera Raw plugin shows up and I can make my settings.
    When I try to right-click from LR, the window does not open. The file is opened but no CR-plugin.
    It used to work on my iMac with SnowLeopard.
    Can anybody help me?
    Thank you for your time.
    Ole

    ACR should never visibly open going from LR to PS.  This is by design.
    Because your LR and CS/ACR are mismatched versions, LR will have to render to a TIF on the way into PS, so there’s no ACR involved.  If you were using matched versions of LR and PS, either LR2/CS4 or LR3/CS5 (or now LR4/CS6) then ACR is called on the way into PS but without your seeing the user-interface.   The adjustments available in LR3 are “newer” than the adjustments available in CS4/ACR5 so it doesn’t even make sense you’d want to see the sliders in ACR on the way into PS, because they’d be undoing or changing something LR had done unless you mean you want to adjust the intermediate TIF file using the older ACR sliders for some reason.

  • Camera raw does not open from LT3.2

    When I try to edit a raw file from LT3 to CS5 the file opens in CS5 skipping Camera Raw.  When I try touse control R nothing happens.
    Mike

    You need CS6.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

  • Camera Raw does not open

    When I try to edit a raw file in photoshopCS5 from LT 3.2  the file opens skipping  Camera raw.  When I open a new file in CS5 it works fine. please help
    Mike

    It is meant to bypass Camera Raw. Lightroom itself renders the image using the same algorithm that CR would have. Don't worry about it and do your CR-type stuff in LR.
    Hal

Maybe you are looking for