Camera Showing "Busy" When Tethering (Canon Rebel XT)

Hi Everyone,
I'm new to tethering and such, but I thought I would give it a go. The problem I seem to be having is that the camera is flashing "Busy" on the display and wont let me take any photos. I am trying to tether my Canon Rebel XT to Aperture 3.1 on my Mac Pro running 10.6.4. The firmware version on the camera seems to be 1.0.2 (although I have no idea how to update that should that be the issue).
Any help would be great! Thanks!
Phil

Change your communication settings within the camera to normal (not PTP). To access the settings from the camera itself, select Menu and then tab along until you see communications, then select normal from the options.
Paul

Similar Messages

  • Camera wont capture when Tethering Canon T5i in Lightroom 4.4. Tried with and without card.

    I just unboxed a Canon T5i (700D). I've been shooting with a T2i for the past three years tethered to LR4 with no problem. Now with the T5i, i connect the camera, set up a new tether session and LR detects the camera in the pop up bar, but the sections for Shutter Speed, Aperture, and ISO are blank. The capture button is able to be clicked, but the camera does not respond. When the shutter on the camera is pressed, also no response. I have tried this with and without the SD card. I have used three usb cable and two different computers. I have checked for updates and my firmware is current. The camera is set to manual mode in the on position NOT the video position and I am tethering to a Windows 7 computer. Please help!

    You will need LR5 for that camera to be supported for direct tethered capture.  Or you can use the LR "Watched Folder" feature and use the EOS Utility or other tethering software packages.  Here is a list of some options - http://www.tethertools.com/plugging-in/software/

  • Camera not found when connect Canon Rebel T3

    When i attempt to contact my Cannon Rebel T3 to my computer it states no camera found, cannont be used with this version of the operating system.  Not a computer or camera guru and have no idea what to do.  I have checked for updated software but my computer states it is up to date.  Any help would be appreciated!!

    I just went to the canon website and saw that just a few days ago they released the software. Go to
    http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_rebel_t3 _18_55mm_is_ii_kit#DriversAndSoftware

  • Little man and camera shows up when I boot up my computer on my screen.

    I sent my Powerbook G4 into Apple because my speakers had started to not have the volumne they had before. All I know is that they replaced my hard drive and my speakers are not any better....and I had Tiger installed and it came back with Panther.
    Ever since, when I boot, I get this little man and a camera come on when I boot up my computer.
    My spotlight doesn't work...I can't find files.
    I wonder what the problem can be.
    Any nice person out there have any ideas?
    Thanks.

    http://support.apple.com/kb/ts1538

  • When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up.  What gives?

    When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up.   Do I need this software?  Can I just download the pictures to my Mac without using the Canon software?

    When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
    You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
    Do I need this software?
    Probably not - exactly what about it do you want?
    Can I just download the pictures to my Mac without using the Canon software?
    Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
    Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
    If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
    LN

  • When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg.

    HI,
    When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. I seem to have tried and read so much but just can't figure it out.  How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. Or do a have to use a different system? I have Adobe Bridge. Or can I upload directly into photoshop?
    Also how do you install dmg's properly I am having problems installing them?
    I have a Mac OS X 13 inch Version 10.6.7
    Advice desperately needed
    Thanks
    Nlouis

    Do you have Aperture installed? I found your model on a compatibility list; however, there was a note that it requires Aperture 2 to be installed:
    http://www.apple.com/aperture/specs/raw.html
    According to this excerpt:
    To see a list of digital cameras with RAW-format support that are compatible with iPhoto, visit this Aperture webpage (any camera compatible with Aperture, Apple’s advanced photo editing and management program, is compatible with iPhoto as well)
    which is at the bottom of this page:
    http://docs.info.apple.com/article.html?path=iPhoto/9.0/en/pht41627265.html
    I may be wrong, but I interpret that info to mean you need Aperture 2 before iPhoto will work with RAW?

  • No import from Canon Rebel XT camera to iPhoto

    iPhoto 6 fails to import from my Canon Rebel XT. Nothing happens. I've tried every suggestion I can find on the Apple and Canon sites, and I'm stymied. Canon's said to reinstall their Solution Disk, so I did that. Also needed a EOS Utility upgrade download. The battery in my camera is fully charged. I've followed all the directions I can find! I'm not particularly computer literate--maybe you can tell. I thought this would be easy, but I've spent half a day on it already!

    Is the camera set to 'PC connection' in the last (5th) menu in the camera settings. That should do the trick. Another option is to get an inexpensive USB 2.0 card reader. That will work really well also and import the images much faster. Then you just remove the card and put it in the reader when you want to download your images.

  • HT3583 I just purchased a Canon Rebel T2i camera and need to know if Aperature 3 will support the Raw files from this camera

    Will Aperture 3 support Canon Rebel T2i Raw picture format?  I just got the camera and am disappointed that their software does not yet work with the Lion operating system.  They said driver would be available in the first quarter of 2012 but when I checked it still is not on the list.  I will upgrade to Aperature 3 from Aperature 2 if it supports the Canon T2i Raw files.  Any input is appreciated.
    Thanks.

    http://www.apple.com/aperture/specs/raw.html

  • Camera Raw CS4 Canon Rebel T3i update?

    Is there an update to Camera Raw (CS4!) for the Canon EOS Rebel T3i?
    Or, is there an equivelant method for opening CR2 files in PS CS4?
    Can I update to Camera Raw 6.4.1 (which is when it started support for the Canon Rebel T3i) with CS4?

    Once a new verson of PS comes out camera raw is not updated, and the old version is not suppported.
    Also, you have to stay with the ACR for each version, which is one number higher than the PS version.  So for CS4 you have to stay with ACR 5.x
    You options are to upgrade to current version so you can use ACR 7.x or download the free current DNG converter.  Currently the DNG converter is 7.1 which is the same as ACR 7.1.

  • HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

    I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

    Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
    It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

  • Canon Rebel Ti images showing only as icons

    I just transferred my images from an old computer to a new one.  All of the photos that were originally uploaded from my Rebel XTi are only showing as icons and are not viewable.  I do not have the Rebel software installed on the new computer just the software for my 40D, could this be why?

    I'm guessing you're probably using RAW and have not installed the Canon utilities on your new computer.  
    You'll want to do two things:
    1)  Using the disk that came with one of your cameras, install the Canon utilities (EOS Utility, Digital Photo Professional, Zoom Browser, etc.)   It actually doesn't matter which disk you use to install (you can use the disk that came with your XTi or your 40D).
    2)  Go to the Canon support site and download the latest version of these apps.  You can navigate to the product page for either camera (e.g. http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_40... )
    The reason you needed to install the base version is that some of these downloads are not the full product... they're "updates".  Both the EOS Utility and Digital Photo Professional require that you have a base version installed, then you can apply the update.  This will bring you new computer up-to-date with the latest features of these apps including the ability to view and open the RAW images created by these cameras.  
    If you were using something else to view and edit your images (e.g. suppose you had installed Photoshop) then you would have to install that software on your new computer and would also likely need to check for updates from them as well.)
    JPEG is a fairly universal format -- so it's rare to find any computer that can view JPEGs.  RAW, on the other hand, is more of a "concept" than a "standard".  
    Each camera can have it's own RAW format.  Consequently, each device that wants to view the files in the native RAW format has to understand that specific RAW format.
    Apple simplifies this... they provide "Camera RAW Updates" at the operating system level which means that the computer does understand (and can open) any of the RAW images even without installing any specifial software.
    Windows is a different story... Microsoft does not provide any sort of RAW support at the operating system level.  Instead, you have to get RAW support from 3rd parties.
    The Canon utilities provided with your camera will know how to open and view any of the photos taken by your camera provided you installed those Canon utilities.  If you use Adobe software, then you'd have to install the RAW updates provided by Adobe.
    RAW images typically contain a small JPEG "preview" image embedded within the RAW file.  Many computers and applications that see the JPEG preview even if they can't actually open the full RAW file.
    Tim Campbell
    5D II, 5D III, 60Da

  • PSE7.0 displays some canon rebel xsi raw camera files garbled

    Greetings,
    I have PSE7.0 running on Vista SP1. I have upgraded the raw file plugin to version 5.2 but still some files display with garbled output. Needless to say Canon provided software is able to view it correctly. Similarly the camera displays it correctly. My camera is Canon Rebel XSi.
    Please let me know what I can do to solve this issue.
    Thanks.

    First, verify that you installed ACR 5.2 correctly by doing Help > System Info in the editor and scrolling down to Camera Raw -- does it show version 5.2?

  • Canon Rebel XSi and OSX - How to copy files from camera?

    How do I copy the files from my Canon Rebel XSi to my Mac? I can "import them into iPhoto but is there a simple copy/paste option such as the camera appearing within the Finder?
    On Vista it comes up as a Camera device within Windows Explorer.
    Cheers
    Rex

    You might not be able to mount the Canon on the desktop unless it has a setting in the camera menu to switch it to USB Mass Storage mode. Many camera brands can do this, but many Canon models cannot.
    It's still pretty easy to get images off it, though. In addition to iPhoto, you can use Apple Image Capture to select and download images to any folder, or any other software that supports the XSi like Canon EOS Utility (included) or Adobe Bridge/Photoshop/Camera Raw. If the XSi doesn't turn up in those apps, make sure you've got the latest versions.
    I don't have the XSi, I have an older model, but according to reviews, the XSi still doesn't have USB Mass Storage support. Without that support I don't think it's going to show up on a Mac desktop.
    You may be seeing it show up for drag-and-drop on a Windows Vista desktop, but the link above says that drag-and-drop in Windows only supports JPEG files, not RAW files. Are you getting just JPEG files on the Windows desktop? If so, and if you intend to use the superior RAW format, then basically you don't have drag-and-drop on Mac or Windows, if the review is correct.

  • My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    Double Click home button, then tap the camera icon next to the slide to unlock.

  • Af:statusIndicator does not show busy icon when a command button is click

    Hi Guys,
    af:statusIndicator does not show busy icon or motion when a command button is click
    I am working on an excel data upload functionality on .jspx page. I use “af:inputFile” file uploader to upload an excel file then process the data and store it as a list of objects in memory and display it in “af:table” table
    I added “af:statusIndicator” to the page to show the user that the page is progressing while the data is uploading and when it is saving the data to the database.
    In this case, when the “af:inputFile” is clicked to upload the excel file - the status indicator shows a progress icon (movement) which is expected and is good. However, after the data have been display in the table when I click on a command button that saves the data to the database – I expected the status indicator to start its busy motion but that is not happening. Whereas, the command button grayed out and is disable when I clicked the button until the operation is completed.
    Is there any way to start the statusIndicator when a command button is clicked?
    I tried the following options
    *<af:statusIndicator id="si1_uploadStatus" partialTriggers="pc1:cb1 pc1:table"/>*
    Where pc1:cb1 is the command button and pc1:table is the table
    *<af:commandButton text="Submit Uploads" id="cb1"*
    *disabled="#{!viewScope.batchUploadController.allSavable}"*
    *partialTriggers="::infFilePath"*
    *action="#{viewScope.batchUploadController.saveUploadedData}"*
    *blocking="true"/>*
    Thanks,

    Can somebody please address this?
    Thanks,

Maybe you are looking for

  • Accessing Java System - Via SAPRouter

    Hi, Is it possible to access the NetWeaver component via SAPRouter.If yes please provide the settings to be done in saprouter and how to access BI java part in web browser. Thanks, Vignesh P

  • Short dump in Z pgm ("GETWA_NOT_ASSIGNED_RANGE" ) after upgrde

    Hi experts, I have a Z transaction for creating contract for imported goods. The first screen gets a list of input (vendor no, agmt type, etc)  and i have a button for selecting a file. On clicking this button, the file path input screen should get d

  • Mac OSX 10.5.8?

    How can I download a trial version of Photoshop for Mac OSX 10.5.8 - not 10.6..?

  • Extracting text from presentation

    Does anyone know of an automated way to output the text of a slideshow into a standard text file? Is there some AppleScript or Automator workflow that will do this?

  • Error in searching AD Users

    Hi, I have successfully linked OBIEE 11.1.1.6 with Active Directory. I can login using AD users, I can also see the list of users in Admin Console. Problem occurs when I assign a report to a user, I'm unable to search for the user. Error shown: Error