Can a replica node have secondary indexes the master does not?
In a JE replication group, is it possible to instantiate a replica (non-master) node that includes additional secondary indices that the master and the other replicas do not have? I would like to have this replica node optimized for performing fast searches on the additional indexes. Previously, all my nodes have had the exact same schema with only a single, primary index. Certainly I could add the secondary indexes on all the nodes, including the master, but the other nodes won't benefit from the add'l indexes as no such searches are expected to be performed on those nodes.
Hi,
No, this is not currently supported. Secondaries must be created on the master as usual and will be replicated to all nodes. However, if secondaries are read frequently on a particular node, they are more likely to stay in cache on that node, or at least more so than on other nodes. So it still may be beneficial to service read requests for secondaries on a subset of nodes. This is a special case of the more general approach where read requests are balanced among nodes according to some form of data partitioning.
The ability to store secondary indexes only on particular nodes would require several new features and is not currently planned:
- ability to have non-replicated databases in a replicated environment
- triggers on the replica so that secondaries can be maintained
- automatic re-creation of indexes when a node is restored from scratch
--mark
Similar Messages
-
How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?
Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best. -
accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help
I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.
-
When I place an Aperture photo on the cloud to share with friends, the idenfifcation information I have entered for the photo does not transfer to the cloud and thus my friends get only the photo. Is there a setting I am missing that would allow the text to go along with the photograph?
The photo stream will transfer the EXIF information set by the camera and the filname/version name. Try to get any information you want to transfer into the filename by batch changing the filename with "write to master" enabled. Aloso, you can set a comment, when sharing the image to the Photo Stream.
-
I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?
Free trials are not available through the Mac App Store.
Apple is not here. Apple does not answer questions here. This is a user to user support forum. There are only folks here who use Apple products. -
I just bought the iphone 4s and when I have loss calls the telephone does not work?
I just bought the iphone 4s and when I have loss calls the telephone does not work?
i cant turn off, i cant do anything
should I droop it?I know this sounds really basic, but did you remove the protective plastic film? I was going to leave mine on for protecting the screen and had the same issue. I removed it as it was the source of the problem.
Good luck! -
Can't install Adobe Flashplayer 12. The user does not have sufficient privileges to install Adobe Fl
I'm trying to install Adobe Flash Player 12. I have tried it on Internet Explorer, Google Chrome and Mozilla Firefox.
I continually get the message "The user does not have sufficient privileges to install Adobe Flash Player"
How can I install Adobe Flash Player??
Any help is appreciated!!March 12, 2014
Hi Pat,
Thank you so much for your reply. Yes I am the Administrator. Nothing worked until I went into my security and disabled my firewall and my security tab. Then Flash Player 12 downloaded without a hitch. Then I quickly re-enabled both my firewall and security settings. I have no idea why it worked but it did.
Thank you so much for your assistance!!
I wish you a great week!
Sincerely,
Lori -
How can I export a movie to Windows Media using QT Pro? Upgraded QT7.7 to Pro for this reason based on the graphic in the QT manual that indicates Windows Media is an export selection.
In my original e-mail I actually pasted a screen print of the drop-down menu in the manual. However, here is the link:
http://images.apple.com/quicktime/pdf/QuickTime7_User_Guide.pdf
Go to section 4: Exporting Files with Quicktime Pro. Page 42 has an illustration of the menu choices. The text states “To see the list of file formats available for a movie open in QuickTime Player, choose File > Export and browse the list of file format choices in the Export pop-up menu.” In the illustration of the drop-down menu, the selection “Movie to Windows Media” is listed between “Movie to QuickTime Movie” and “Sound to AIFF.” However, the actual application does not provide this option. After reading the support threads (after my purchase), users agree that WMV is not supported. However, the Apple user manual clearly displays this option and it was this documentation that led me to purchase the QT Pro upgrade. If the format is not supported, why is it listed in the documentation?
I feel that this illustration is misleading, and I’m requesting a refund based on the fact the application does not support an option illustrated in Apple’s published manual.
If this e-mail supports attachments, the attached file is the pdf version I saved of this manual.
Curt -
I have an index page that does not correctly load css, but css works on all other pages in the site.
http://www.boulderridgecondos.com/ does not load the css correctly, but ALL other pages in the site do load the css correctly. There is nothing different (that I can identify) between the pages.
http://www.boulderridgecondos.com/news.htm
I am guessing that there is something wrong in the css, I inherited this site and have gone over the css but can't find a issue that would cause this to occur.
Any help or suggestions to research something would be appreciated.That page is saved as UTF-16 (Content-Type: text/html (BOM UTF-16, litte-endian)) in your text editor. The CSS file is send as ISO-8859-1. Firefox likes to see all files in the same encoding. The other pages are send as ISO-8859-1 and thus use that CSS file. You will have to re-save that page as ISO-8859-1 and upload that corrected version.
-
Why can I download and install CS6beta but the program does not activate???
Why can I download and install CS6beta but the program refuses to be activated on the idiotic grounds that either I am not connected to the internet or my computer clock is not showing the right time? If in New Zealand we're not allowed to use the beta, why does Adobe not have the decency and courtesy of telling us so and why instead of feeding us with those stupid putoffs???
I had a note from PS Pattie ; I can't find it here. Anyhow, these were her questions and my answers:
Q:Did you download from this location? http://labs.adobe.com/technologies/photoshopcs6/
A: Yes
Q:Did you select TRY and enter your Adobe ID?
A: I was then asked to "Sign in". I pressed the sign and got the following reaction:
Please connect to the internet and retry. Either your computer is offline or the clock on your computer is set incorrectly, causing a connection error. An internet connection is required. Please connect to the internet or adjust your clock and try again. If this problem persist, please contact Customer Support. I did so and was told "This page is not available"
Q: Did you try to download again and install?
A: Yes, three times – each time 1.71GB. I tried many other devices; none worked.
gw -
Oracle 8.0.6 replication - Mlog file in the master does not empty
Data in the log file in the master database does not deleted after the refresh job successfully completed for this table. I also tried the Complete refresh table. this but the log file still is not empty. All records in master table replicated to this remote site fine. What must I do to empty this log file, since it keeps on growing. Please help.
One Mlog could be used by many snapshots (mviews)
This select:
SELECT sl.log_owner,
sl.master,
sl.log_table,
rs.owner,
rs.name,
rs.snapshot_site
FROM sys.dba_snapshot_logs sl
JOIN sys.dba_registered_snapshots rs ON rs.snapshot_id = sl.snapshot_id
select all mlog and associated snapshots (mviews).
Check for your one, how many snapshots are there.
Do refresh for all snapshots and mlog must be empty if there are no modificatiion of master table. -
I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it. I am using an AOL supplied router and have read reports that this can cause problems. Is this the case? How do I resolve this issue?
Hi,
That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
Bonjour Services relies on IP Multicasting which have to be supported by your network.
To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
Once the iPad connected to the Wireless Direct network try printing and check for any difference.
If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
Shlomi -
ONS 15454: 1 node got LOS alarm, the other does not?
Hello everyone,
I've got a problem with my ONS system. As you can see in the figure, the first one is CTC view of Node1 and the second one is Node2.
In LINEAR model, side B of Node1 connect to side A of Node2. But take a look at them, side B of Node1 is working normally, no alarm. But side A of node 2 is RED with Los of signal alarm.
My traffic is still working good between 2 Node. It is so strange, I have never been experienced the error like this before. Please tell me what this situation is? Thank you very much.
Figure1 - CTC view from node1
Figure2 - CTC view from node2/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Hi,
Most likely you have an asymmetrical fiber loss (verify WDM span check on both nodes) or the power failure low thresholds are tuned differently on the OSC-SCM cards.
There are no amplifiers on that link, hence, LOS is informative message indicating the threshold is exceeded, but apparently, that power level is still good enough for the muxponder to work.
Having an amplifier would bring the connection down as on LOS amplifiers are shut down due to security requirements.
Regards,
/A -
In the Date Picker, How can I default to select * dates if the user does ..
In the Date Picker, How can I default to select * dates if the user does not select a date.
Thanks,
DougDoug,
Now lets say l want everythingCould you post some sample data and the output that you want to get..? It would be much easy to understand the requirements...
When you mean everything, I am assuming you need all possible dates possible between date1 and date2.
you can use... (from asktom.oracle.com).
1 select to_date('12-jan-2009','DD-MON-YYYY') + rownum -1
2 from ALL_OBJECTS
3 where rownum <= (to_date('20-jan-2009','dd-mon-yyyy') -
4* to_date('12-jan-2009','DD-MON-YYYY') +1 )
sql> /
TO_DATE('
12-JAN-09
13-JAN-09
14-JAN-09
15-JAN-09
16-JAN-09
17-JAN-09
18-JAN-09
19-JAN-09
20-JAN-09
9 rows selected.
For your case, since you have date1 and date2...
select to_date(:p12_date1,'DD-MON-YYYY') + rownum -1
from ALL_OBJECTS
where rownum <= (to_date(:p12_date2,'dd-mon-yyyy') -
to_date(:p12_date1,'DD-MON-YYYY') +1 )Should work.. in my opinion...Haven't tested the second one in Apex .
Is this what you were looking for ..?? If not, please elaborate...
Thanks,
Rajesh. -
Is there a settings in Win7/HP feature that the battery does not charge until it is under 95%
I just purchased a HP Pavilion dv6-7043cl laptop and have noticed that the battery does not charge unless it is below 95%. I am very concercerned because I had a different laptop from a different manufacturer where I had battery issues. That manufacturer was not helpful and I will never buy from them again.
I have heard good things about HP which is why I decided to buy this particular machine. However, I have only had this machine for 3 days and now this is starting. I cannot find a Win 7 (I am running Win 7 home premuim 64 bit) setting that controls when the battery starts to charge. Is this a function of the HP Power Manager? Is this a feature of the battery HP ships with their laptops? Or is this indicating a problem with this machine? I am a college student and I need a reliable laptop for school.
Any information you can provide is greatly appreciated.
Thanks,
HanNan
This question was solved.
View Solution.Hi,
This feature is intended by design in order to reduce unecessary charge/recharge cycles - reference to this can be found in the 5th paragragh in the document below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00287805&cc=us&dlc=en&lc=en
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
PCs suddenly no longer see Airport Express wireless network - please help!
Hi, I am new to this forum and I need help. Two days ago - without me making any changes to settings etc. my Airport Express wireless network at home was no longer visible to any of my devices except to the Powerbook (G4 OS 10.3.9) which controls it.
-
When I click some hyperlink, (generated by Command_link component), It pops out a javascript error message, indicates that field *:idcl is null or null object, namely the field *:idcl is missing. I have a close look at html code, I found that most Co
-
How do I send a writable PDF to a non adobe user?
We have adobe acrobat X pro in the office and are needing to send applications to clients so they can fill it out on their computers at home and send back. Is there a way using this program?
-
I mean iPhone 5 so listen to music on a stereo ?
-
DECLARE @tableA table (Productid varchar(20),Product varchar(20),RateID int) insert into @tableA values('1','Mobile',2); insert into @tableA values('2','Chargers',4); insert into @tableA values('3','Stand',6); insert into @tableA values('4','Adapter'