Can AnyConnect & Cisco IPsec co-exist on client pc?

Hi- a home user has to connect to one
business using AnyConnect and to us using Cisco IPsec client.
When installing AnyConnect, it wiped out the IPSec client. Can they co-exist on his pc and function side by side?
I'm sure they can't be used simultaneously, but can't both clients be installed for very different connections?
He's running 32-bit xp.
Thanks.

Kathy
I am surprised that installation of AnyConnect removed the traditional IPSec client. I have not had that experience. I have several PCs running Windows XP SP3 which have both AnyConnect and IPSec clients installed. Either client works just fine (but not both at the same time).
HTH
Rick

Similar Messages

Cisco IPSec VPN Client and sending a specific Radius A-V value to ACS 5.2

This setup is to try routing Cisco VPN to either RSA or Entrust from Cisco ACS 5.2, depending on some parameter in incoming AUTH request from Cisco IPSec VPN Client 5.x. Tried playing with pcf files and user names/identity stores, none seems working

Hi Tony,
to the best of my knowledge this is currently not possible, but will be once this enhancement is implemented:
CSCsw31922 Radius upstream VSAs (Tunnel Group,Client type) for VPN policy decisions
You may want to try and ask in the AAA forum if there is anything you can do on ACS...
hth
Herbert

Mavericks VPN dropouts with native VPN client and Cisco IPSec

Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions?

Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
I am connecting via a WIFI router to a remote VPN server
The conenction is good for a while but eventually it drops out.
I had Zero issues in mountain lion and only have issues since the update to 10.9
I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
My thoughts are:
1 -issue with mavericks ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
2- Issue with cisco router compaitibility or timing with Cisco IPSEC
3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
Any thousuggestions?

Configurate cisco ipsec vpn client at asa 5505 version 8.4

Hi dear. I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4.
please provide me a link or some material to config ipsec vpn client at asa 5505 version 8.4
thank you.

are you looking for vpn client .pcf file or the configuration on ASA (ASDM) ?
what version of vpn client ?

Cisco IPSec Client - shared key size

Hello,
I have got a question concerning the Cisco IPSec Client.
Could you tell me, how large the key may be (max. 64 or 127 characters) ?
Thanks and regards
Patrick

Just to help somebody else facing an issue similar to this one.
Open Advanced menu from the configurated VPN in the Network Preferences and check 'Send all traffic over VPN connection'.
The problem is when you have a VPN that routes all the traffic, if you want specific routes they should be configured and passed on from the router.
I've configured a tested several vpn connections to Cisco ASA without an issue when the routes are configured on it (vpn_net1, vpn_net2 and so on) but when the route isn't specified in the router it should be considered as a default route and this option needed to be checked.

Cisco IPSec Client Setup for Wireless

I would like to set up Cisco IPSec VPN Client on a wireless Laptop to authenticate to a Cisco Radius Server 3.2. (WLC 4100)with pre-share keys.
I have setup the basic parameters on the WLC,SSID, VLAN, L3 Security IPSec and default IPSec parameters. The WLC does not seem to send/forward any kind of request to ACS at all and when i connect on the Wireless Client it behaves as a pass through VPN.
Thank you,

Try these links:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008014a37c.shtml
http://www.cisco.com/warp/public/480/acs-peap.html
http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_administration_guide_chapter09186a008015cfd8.html

Version of Cisco IPSec used in 10.6

Hi everyone,
What version of Cisco IPSec does the built-in client in 10.6 use?
A

My update of OS X to 10.6.3 made mail.app (v. 4.2 1078) unusable.
Connections to receive mail timed out repeatedly. This happened on both POP and
IMAP accounts.
I tried to rebuild mailboxes/indexes, delete preferences, etc. Nothing worked. I set up new
accounts and had the same problem. I tried other email clients (Thunderbird and Seamonkey)
with existing and new accounts and had the same problem.
I set up Seamonkey running on a Vista machine on the same network with the same account
information as on the Mac and it worked fine.
I reinstalled the last OS update (10.6.3) again, no change.
I finally reinstalled the OS from the installation DVD. Now running OS X v. 10.6 and mail.app
v. 4, and after a slow startup (caching attachments from the IMAP account) everything seems to
be back to normal.
Besides the various email clients, no other applications seemed to be affected by the 10.6.3 update.
John

Cisco IPSec and XAuthPassword profile key

I am creating the config profile for iPhone, while using iPhone Configuration Utility I can not enter password for IPSec VPN as the application does not have UI for that.
I had found, though, that manually writing "XAuthPassword" key into the config profile does the trick, iPhone do recognize that entry and sets the password automatically on applying profile.
So, the questions are:
1) Is this config key officially supported on iOS for IPSec VPN? If yes, then starting with which version?
2) Because iPhone Configuration Utility does not allow me to create signed profiles containing XAuthPassword key, can I manually sign the configuration profile I had edited?
Thank you in advance

Hi,
in « iOS Configuration Profile Reference »:
IPSec Dictionary Keys
XAuthEnable – Integer:1 if XAUTH is ON, 0 if it is OFF. Used for Cisco IPSec.
It turn off XAuth and do not ask for User/Password.
You can try this option by editing configuration profile like this:
<key>XAuthEnabled</key>
<integer>0</integer>
<key>AuthenticationMethod</key>
<string>Certificate</string>
but I can`t resolve the problem, I seems it is a ios (4.3.1) bug, because my vpn-server works fine with other vpn-clients, like Cisco VPN Client, with certificate authentication and without xauth.
Best regards!

Double VPN (Cisco IPSEC + PPTP) no longer works in Yosemite

Hi there.
I used to use two VPN connections pre-Yosemite, I could establish a Cisco IPSEC VPN using the native VPN in Mavericks, and then establish another VPN through that connection to connect to a PPTP VPN.
It is not possible anymore, but if instead of using Apple's Cisco VPN implementation I use Cisco's AnyConnect, then sure enough I can use the native PPTP VPN to connect to my lab.
MacBook Pro --> Corporate VPN (Cisco) --> Lab VPN (PPTPD)
Whether I use Cisco AnyConnect or native VPN, I can always ping the PPTP server, but can't establish a VPN if using native VPN.
Anybody noticed something change and maybe has a fix for that?

The issue was with my tech department after all...

Cisco IPSEC VPN not working after upgrade to Mavericks

I have been using the Cisco IPSEC VPN for almost 2 years with no issues. When I upgraded to Mavericks this week it stopped working. When i tell it to connect it prompts for password and attempts to connect for about 30 seconds then comes back with the following message...
VPN Connection
The negotiation with the VPN server failed. Verify the server address and try reconnecting.
The address, group, shared secret, user and password are correct. Any help would be greatly appreiated.

Hry, I'm not sure if this fixes the Cisco IPSec issue, but I can vouch for it fixing the L2TP issue that occurs after tha mavericks upgrade!
I’ve got L2TP VPN working in Mavericks 10.9 and Server App 3.0.0 / 3.0.1.
It really is quite a simple fix.
Obviously, the standard caveats apply: This is a temporary, unsupported, workaround, and only a suggested idea at that. Again, this workaround is NOT supported by Apple.
Proceed with this workaround on your own equipment at your own risk. And remember the golden rule: Always backup your data!
OK so here goes… copy and paste the following into termini ONE LINE AT A TIME!
cd /tmp
curl -sO http://c5mart.co/mavericks-vpn-fix/racoon.tar.gz
tar -xzvf racoon.tar.gz
rm racoon.tar.gz
sudo chown root:wheel racoon
sudo chmod 555 racoon
if [ ! -f /usr/sbin/racoon.mavericks ]; then sudo mv /usr/sbin/racoon /usr/sbin/racoon.mavericks; fi;
sudo mv racoon /usr/sbin/racoon
sudo killall racoon
This works fine for me and I'm running a OSX Server for my entire office.
…et voilà!

User does not exist in client 900,

Hi All,
I am getting a user mapping error in my Fixpack1 setup and I have looked all over and cant see where I am going wrong.
The error I see in SRUTIL on my SCL is: User ess\domass does not exist in client 900
I have checked and completed the setup: /IWFND/WSS_SETUP and am sure my WS Security options are correct.
I configured the user mapping using SIMGH but had to update the entrys in SM30 but VUSREXTID looks to be set with the correct mapping of the problem account: SharePoint::ess\domass
I have checked in SE16 and table /IWFND/V_C_ISSUR has the correct Sharepoint config: SHAREPOINT_INT - SharePoint - CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US
The settings in LDAP are correct and I am connecting to my ADS OK.
I have checked the ISSUERH field in table USREXTID and that does have data inside it but when I delete that data as instructed from other SDN posts this does not make a difference to my connection.
Is there something else I can check?
Many Thanks
Mike

Hi Mike,
I haven't seen this error before. It almost sounds like the user mapping is by-passed all together.
There is one more place you should check. Go to SAML2 and verify the following:
Trusted provider tab --> Secure Token Service --> select SharePoint --> Identity Federation tab:
Here you should have one entry called 'Unspecified' and the setting for 'Details of NameID Format' should be set to 'Mapping in USEREXTID table'.
Cheers, Alex

How to enable for Internet-Based Client Management existing "intranet" clients

Hello,
Step #1
I have an existing "intranet-only" SCCM 2012 SP1 CU1 environment. It is made of HTTP Intranet-Only MP.
All clients are properly communicated with one of the intranet MP
All clients are leveraging auto-enrollment of our AD PKI and have a working client certificate recognized by SCCM client
Step #2
I expanded the above infrastructure to support IBCM clients. Basically I want the existing intranet clients still be managed when they are outside our network
I added MP, DP, SUP, FSP on dedicated DMZ servers. It has been published on Internet, and properly declared with public DNS
The DMZ MP has been configured for HTTPS / Internet client only
When I tested first this setup in my lab, it was working fine, and my "intranet" client moving to Internet was properly detecting this configuration, and was starting to contact the "DMZ/Internet MP" without any problem
I did the same on my production environment but this time, my client moving to "internet" detectes it is connected on Internet but does not have any clue about the DMZ/Internet MP to contact. According to logfile, it is trying to check on DNS,
WINS, etc. but obviously it is already too late when in Internet, this information is no longer available.
I guess I did something in my lab environment to make it work but I don't what. Any idea how to tell to existing clients they should use a new "Internet-Only" MP when they are on Internet ?
Regards.

Basically I found my problem...
In my lab, I manually configured the SCCM client option Internet-based management point (FQDN) to use the public DNS address of my Internet/DMZ MP.
If I do the same for my production sample client, it works fine now.
Question: how can I enforce this change on all my existing clients ?

Profile for Cisco IPsec VPN does not set shared secret correctly

Hi,
We have a shared secret configuration for a Cisco IPsec (connecting to an ASA). I can correctly configure a profile for the Cisco IPsec VPN and deliver it to the device. However, the VPN connection fails due to an invalid shared secret. If I then go into the VPN settings on the device itself and manually retype the shared secret, it works fine.
I have noticed this when generating the mobileconfig profile both from Apple's iPhone Configuration Utility and also when using the MobileIron management platform to generate and push profiles.
Has anyone else seen this problem? I'm really confident that I'm typing the shared secret correctly in the iPCU generated profile as I've tried it many times. It also has happened across every flavor of iOS 3.x and 4.x (including the 4.2 betas).
thanks

Hi,
Thanks for the reply but it is a bit of a strange one. What makes you think the shared secret we are using - which you don't know - is more than 32 characters long. I can promise you it isn't. There's a bug in the way mobileconfig files are storing the encrypted shared secret values. I've now seen it on a third party mobile device management platform too.

Setting in native Cisco IPSec come with Lion

In my new MBA, I would like to setup a VPN connection. Found that there is native Cisco IPSec inside Preference -> Network -> VPN and would like to configure it. However, I need to change Port Number of destination, but cannot find anywhere I can do it. Is there anywhere I can change the destination port number of the VPN setting? (e.g. modify the configuration file via editor directly)

This might help, at least from Harald's post onwards.

Cisco 1130 ag 802.11B clients

hello, i've set an aironet cisco AP 1130ag.
but only radio G is working so 802.11g
radio A is disable.
only the G clients can see my wireless ssid
in B clients my network doesn't apear in laptops
i have the data rates speeds as default so that B clients can see it
the network encapsulation in 802.1x instead of RFC1042
what kind of configurations do i need to do so that B clients can see my network.

hello, i've set an aironet cisco AP 1130ag.
but only radio G is working so 802.11g
radio A is disable.
only the G clients can see my wireless ssid
in B clients my network doesn't apear in laptops
i have the data rates speeds as default so that B clients can see it
the network encapsulation in 802.1x instead of RFC1042
what kind of configurations do i need to do so that B clients can see my network.

Can AnyConnect & Cisco IPsec co-exist on client pc?

Similar Messages

Maybe you are looking for