Can anyone help me with Mail for Mac passwords?

I have been using Mail (on my MacBook Pro running OS 10.8.2) quit happliy for some time. I have several accounts for good reason. Recently two of the accounts started asking me to enter my password (see screen shot below). Having done so too many time, my account became locked and I had to go through Yahoo mail to reset it (with help from BT). In the end I had to change three passwords. While two of them are now being accepted by Mail, the third is not. Can anyone help?

I should also say, that I have now upgraded to 10.8.3 and following the advice elsewhere, the password saved in my keychain access is the correct one.

Similar Messages

Can anyone help me with advice for a replacement hard drive

Hi there,
Can anyone help me with advice for a replacement hard drive and RAM upgrade for my Mac Book Pro 5,3
Its 3 years old & running Snow Leopard 10.6.8
I do a lot of audio & movie work so performance is important.
The logic board was replaced last summer & I was advised to replace the hard drive then...oops
Anyway it has limped on until now but is giving me cause for concern...
I have found a couple of possibilities below...so if anyone does have a moment to take a look & help me out I would be most grateful
http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=sr_1_1?ie=UTF8&qid=1356787585&sr=8-1
http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=pd_s im_computers_5
Kind regards
Nick

Thanks guys that is so helpful :-)
I will follow your advice Ogelthorpe & see how I get on with the job!!! Virgin territory for me so I may well shout for help once my MBP is in bits!! Is there a guide for duffers for this job anywhere??
& yes in an ideal world I would be replacing my old MBP but I'm just not in a position to do that at the moment....let's hope things pick up in 2013
All the very best
Nick

CAn anyone help me with MAIL and my earthlink account?

I've had DSL with Earthlink for several years now and never had connection problems. In the past two weeks, however, MAIL will sometimes fail to send email and sometimes fail to retrieve email from my Earthlink webmail account. The strangest thing is that this happens intermittently, even though no settings have been changed. Most of the time I can retrieve email, but other times I get the error message that "port 110 has timed out". Most of the time, I cannot send email, but other times the email shoots right through when I open mail.
I called Earthlink about this and we set up my MAIL program step by step according to Earthlink guidelines. Unfortunately, this did not help the matter.
My MAIL preference settings are as follows:
My incoming mail server is pop.mindspring.com on port 110.
My outgoing mail server is smtpauth.earthlink.net. The outgoing server port is 587. SSL is not checked. Authentication is by password.
All of these settings are correct according to the Earthlink tech.
If this matters, my G5 is connected wirelessly to an Airport Express base station.
Again, I'm puzzled that I've only just begun to have these issues and they seem to happen randomly.I also see that similar discussions have been had on this forum with Earthlink and MAIL, but I don't see any resolutions. Can anyone shed some light on this? Thanks.
Message was edited by: Kevin Robinson
Message was edited by: Kevin Robinson

I had problems with my Earthlink DSL quitting about a month ago. I went through some of the same Earthlink tech support troubleshooting hoops, hooking directly into my ethernet port not into the Airport etc. Eventually an Earthlink senior tech said my Netopia modem was defective. After some financial haggling they sent me a new Zycel modem, that didn't work either. Earthlink made an appointment and sent out an AT&T tech to the house. He hooked in and said it was a defective phone company circuit board. The AT&T tech called in for the phone company to change the circuit board now both the Netopia and Zycel modems work.
Note: while checking the line, the AT&T tech it my DSL line was sending one protocol it would work if my modem was set up to receive it. (protocol is my word I don't remember his exact word).
Another Note: Also when Earthlink wanted to replace my modem they wanted my to pay (the dollar amounts are approximate) $80 for an new modem, or get a free modem with an exorbitant $40 shipping fee and commit to an other year of service. I eventually bargained down to a free modem, free shipping and $20 off the monthly fee.

Can anyone help me with compressions for web streaming? So lost!

Hi there
I am so confused !
I have the task of getting HD footage from my camcorder ready for quality web-streaming on a website. The clips need to be in mp4 format using the H264 codec. As we are dealing with HD footage, I want the viewer to be very happy with the picture quality. I must admit that most of my compression settings were kind of guess work and I was only judging my results by the final file size in relation to the video quality. I was getting file sizes of about 16mb per minute of video/ audio footage.
I had been keeping my frame size at 1280x720 and my bit rates were about 2000-2500kbits/s. Bandwidth is a real concern as there will be alot of people streaming these videos and there might be over a hundred videos on offer at any one time. I found that bit rates any less than this were resulting in a poor picture quality.
I have since learnt that what I was doing is completely wrong!
I was told that my frame size was way too big for normal web-streaming of HD footage and also that my bit rate was too high and bandwidth hungry. I never knew that the bit rates I set when compressing my videos would have an effect on the bandwidth that would be used. I am obviously showing my ignorance!
If anyone has anytime to help out someone who has no idea, I would absolutely love to know the answers to these questions:
1. What is considered a good acceptable frame size to show HD quality footage? Maybe a size that if the quality is OK, they can also stretch the frame afterwards to fill their screen without losing too much quality?
2. I want to use mp4 with the H264 codec for streaming, what is an efficient bit rate to set the compression at, so that the quality looks nice, but wont drain my bandwidth unnecessarily?
3. Can anyone explain how the bit rates that I set for my compressions affect the way they are downloaded once they are on a website. Just cant get my head around this logic for some reason?
4. What other compression settings should I be aware of (eg. keyframes etc)
I feel so lost in all of this and would appreciate it tremendously if anyone can help me out.
Dan

If I select a bit rate of say 2500 to compress my videos at, what will that now mean for the end user? Will that mean that his connection will be forced to download that video at 2500kbp/s thus using alot more bandwidth?
Yes and no. If the end user has a connection that allows them to receive data at 2500 and the source from the web can supply data at that speed then they'll be able to stream in real time. However, if either end doesn't hold up (the client's connection can't receive data that fast or the source can't send it) then end users will be forced to watch it on delay - letting a good portion of the movie download first. QuickTime will do this anyway - if you (as I do) embed a movie into a webpage, when you visit that page QuickTime will calculate how fast data is being sent and received, and decide when to start the movie based on that calculation.
I was told that the bit rate I set when I compress these files locally on my machine, tell the streaming software how to allow users to download them - is that true or have I got all mixed up?
You keep saying streaming and I'm not sure exactly what you mean. Streaming can either mean having a finished file on the web that people can watch with minimal downloading in advance, or streaming can mean sending a live event out over the web. I think you mean the first. In that case, there is no streaming software on the server side - it's just a file that gets sent to a client just like any other file. The bitrate however does tell the client software, like QuickTime player when to start playing the movie (As I alluded to above).
If you really want to "stream" content - in other words allow people to go to page and start watching then I'm going to suggest you distribute in multiple formats. QuickTime has a number of presets you can use for "streaming", and these are usually small (320*240 or 640*480) videos that are under 1 Mbps (often less than 500 kbps). These files can normally be watched in real time by most clients.
The other catch with the route you're going is that some computers simply can't handle 720p content that is encoded in h.264 - they just don't have the power. If you look at podcasters many of them have chosen to go multiple formats in part for this reason - they have video embedded on their websites for watching in real time, small iPod formats for lower-power computers and iPods, and HD formats for platforms like the Apple TV that offer the best quality.

Can anyone help me with Facetime on Mac.

I can call and connect from iphone to ipod and ipod to iphone, but when i try from mac, the iphone/ipod gets called, but when I press 'accept', it stays in 'connecting...' mode, until it times out. It then tells me the called iphone/ipod "is not available for Facetime"

Hi and welcome to the forums Leesa!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
See this link (and be paient!) Got your BB Wet?
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Can anyone help me with sql for this issue?

I need to get the data from Last year starting Date From 01-Jan-2012 to current date i.e. 27th June 2013... Upper limit I can have as SYSDATE. Can some one help me how to get the start date for last year?

SELECT TRUNC ( (TRUNC (SYSDATE, 'YYYY') - 1), 'YYYY') FROM DUAL;
can be used.
Cheers,
Manik.

HT1277 Mail on my Mac computer does not update when I update my mail on my phone and iPad. Can anyone help me with this? Is there a setting I need to check?

Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?

All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then?

I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4

I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4

Meg81 error 214 indicates a download data validation error. This means that the update you downloaded became corrupted likely during the download process. I would recommend utilizing the suggestions listed in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html to attempt to improve the stability of your Internet connection.
You can also find information on how to review your download logs which may provide additional information regarding the failure of the download.

I just received photoshop elements 10 that I bought used thru Ebay, for my OSX Mac 10.5.8. I put the discs in my computer and nothing happens to help me download it. Can anyone help me with this instillation challenge?

I just received photoshop elements 10 that I bought used thru Ebay, for my OSX Mac 10.5.8. I put the discs in my computer and nothing happens to help me download it. Can anyone help me with this instillation challenge?

Does your mac have an intel processor or PowerPC processor?
System requirements | Adobe Photoshop Elements
Did you insert the disk that is labeled mac os?
After you insert the disk, it should show on your desktop.
If you double click on the the disk icon on the desktop, does anything happen?
more info about the included disks:
FAQ: Installing Elements 10, or What do all these disks do?

Want to install Skydrive on my mac, but the app store wants US billing information and I am in Gibraltar. Can anyone help me with this?

Want to install Skydrive on my mac, but the app store wants US billing information and I am in Gibraltar. Can anyone help me with this?

Yes, if this is a permanent change. But you still have to have all the other changes - billing address, credit card, residence, etc. See Manage My Apple ID.
If you can't remember answers to security questions:
The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

My search bar for my library no longer works. Also, the menu bar is no longer visible. Noticed this problem last Saturday. Can anyone help me with this?

My search bar for my iTunes library no longer works. Also, the menu bar is no longer visible. Noticed this problem last Saturday. This might be an issue with my desktop, and not iTunes itself Can anyone help me with this?

Press Ctrl-B to toggle the menu bar on and off.
When you say that the "search bar for my iTunes library no longer works" can you be more specific? The operation of the search function has changed in iTunes 12, essentially having two very distinct modes:
when Search Entire Library is checked, entering a search string will generate a dropdown of all matching items within your whole library, from which multiple operations are available via context menus
when Search Entire Library is unchecked, entering a search string creates a filtered view of whatever your current focus is (e.g., if you're looking at a playlist the filter applies only to items in that playlist) with none of the dropdown options as in the first case

Can anyone help me with getting the best setting for me system

can anyone help me with getting the best setting for me system on cpufan it says my temp is 38c but on corecentre it says 42c can anyone help get my system overclocked any more but keeping it stable as well thanx in advance for the help

my corecenter temp sometimes says im at 60 cel at idle....and i have the most recent update...i would rely on speedfan for temp control...core center seems to always read 3 degrees higher than speedfan on my pc....
i wouldnt be too concerned...those temps are pretty low to begin with.

I have updated to the new version of iPhoto but it will no longer let me edit text in the preset text boxes. The text is highlighted for a nanosecond but will not stay highlighted so I can amend it. Can anyone help me with this. Many thanks.

I have updated to the latest version of iPhoto. But now iPhoto will not let me amend the preset text in the text boxes.
the text is highlighted for a nano second but it will not stay highlighted so that I can add my own text.
can anyone help me with this issue.
Many thanks

You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

Can anyone help me with Mail for Mac passwords?

Similar Messages

Maybe you are looking for