Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan
Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan
The easiest way is to connect the G5 and your new iMac together via Firewire. Then you can use what is called "Target Disk Mode" which basically makes the G5 look like an external hard drive to your iMac. The potential gotcha is if your new iMac does not have a Firewire port. In that case, you need to get the Apple Thunderbolt-Firewire adapter in order to connect the two machines (as far as I know, all G5's had one or more Firewire ports). I have done this many times, it's easy and works perfectly.
Alternatively, you could connect both Macs to the same network and log into the G5 from your iMac. This involves going into System Preferences > Sharing on the G5 and turning on File Sharing and then logging in from your iMac to the G5 as if it were a server. (Logging in through the Finder or via Go > Connect to Server). This also works fine but it's a little more involved than using Target Disk Mode. I do this all the time and it too works fine.
Either way, once the two Macs are connected, you will use the Finder on your iMac to copy files/folders from your G5 the same as you would from any external hard drive. Regarding iTunes, you could just copy your entire iTunes library over to your iMac being careful to put it in the same relative folder location: /users/yourusername/Music/iTunes This method will preserve your playlists and album art. Alternatively you could go into iTunes and do Add to Library but I'm not completely sure doing it that way will bring over your album art and it certainly won't bring over your playlists.
I see no reason to use a separate external hard drive. It will just double the time it takes to transfer your files because you would first have to copy everything to the hard drive, then in a second step copy everything from the hard drive to your iMac.
Note: In all cases there is the possibility that you may need to change file & folder permissions on the things you copy over so you can access (read & write) to these folders & files once copied to your new iMac. This is not a difficult process.
Similar Messages
-
Can anyone help me with a white screen on boot, chime and unresponsive keyboard
As stated in the title it boots up with a white screen and it chimes but i cant use any of the commands to get into the recovery or even boot from a cd or usb drive. I've taken out the hdd and put it back it and it doesnt seem to be the problem. Is there anyone who can tell me exactly whats wrong with it?
sqredreaper wrote:
model number a1286 im not exactly sure of the os seeing as i just received it yesterday,
A1286 isn't specific enough, I need more information for a exact model match.
http://everymac.com/ultimate-mac-lookup/?search_keywords=A1286
If I know the exact model, then I can tell if that came originally with Snow Leopard, we can install Linux.
Would it be possible for me to format the mac hdd from my pc?
Not with Windows, Linux might, but it would be a difficult.
Mac's as you know have EFI, which is loaded from a hidden partition on the boot drive.
Only OS X, their install disks (and 10.7+ Recovery HD parititon) can format the drive properly for a Mac to use, as they install EFI which the hardware requires for the at boot keys to be able to select Linux and install rEFIt in EFI firmware.
If your Mac meets 10.6 qualifications, then the 10.6 install disk can be ordered, the instruction for creating a dual boot system with Linux Mint.
Of course there is a problem, if the machine is too new, then hardware drivers to work with Linux might not have been circulating to use.
Apple doesn't supply the hardware drivers for Linux or anyone, so it takes hackers to get them and they have to have Mac's. (they rather use generic PC's)
Older Mac's pre-2011 I know where the drivers are at, on Ubuntu's site (Linux Mint is based on Ubuntu) however I don't know if latest versions of Ubuntu/Mint work with those drivers, I'll asume they do.
Hardware drivers are important because the machine won't work well without them, like no Wifi, video screen options etc. one just gets the bare minimal use.
Interest in running Linux on Mac's died when Apple released OS X 10.7, as the Recovery HD partition created a obstacle and Apple seems to be heading towards a closed system like on iPads and iPhones.
Linux needs open hardware like generic PC's, and the trend from Microsoft is like Apple, closing up hardware from anything but Windows running.
If you haven't installed Linux on a generic PC, I suggest you try that first as on Mac's it's the most difficult. -
Hi I am using a JVC GY-HM100 camera which is meant to work well with final cut pro. I have an ongoing project but need to save money and resuse the SDHC cards that are currently full of footage.
Would I be better off transferring the footage straight to the time line (as rumour has it you can do this with this camera) or store the footage on a hard drive and edit it later without risk of losing the footage.
Many thanks
LindabobThanks Linda,
Here's some more info for you:
This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
Make sure you're using the latest version of the application - FCP X 10.0.3 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.3.
Check that you have at least 20% free space on your system drive.
If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system. Do NOT import any of the settings etc from the old account - simply use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended - but remember, if you reinstall the system, and then use Migration Assistant (or anything else) to import all your old settings etc etc, you may well be importing the cause of the conflict in the first place.
Keep projects to 20 mins or less (about half that for Multicam). If you have a long project, work on short sections, make them into Compound Clips and then paste these into a final project for export.
If you ever experience dropped frames, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
http://assistedediting.intelligentassistance.com/EventManagerX/
Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy -
Can anyone help me with advice for a replacement hard drive
Hi there,
Can anyone help me with advice for a replacement hard drive and RAM upgrade for my Mac Book Pro 5,3
Its 3 years old & running Snow Leopard 10.6.8
I do a lot of audio & movie work so performance is important.
The logic board was replaced last summer & I was advised to replace the hard drive then...oops
Anyway it has limped on until now but is giving me cause for concern...
I have found a couple of possibilities below...so if anyone does have a moment to take a look & help me out I would be most grateful
http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=sr_1_1?ie=UTF8&qid=1356787585&sr=8-1
http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=pd_s im_computers_5
Kind regards
NickThanks guys that is so helpful :-)
I will follow your advice Ogelthorpe & see how I get on with the job!!! Virgin territory for me so I may well shout for help once my MBP is in bits!! Is there a guide for duffers for this job anywhere??
& yes in an ideal world I would be replacing my old MBP but I'm just not in a position to do that at the moment....let's hope things pick up in 2013
All the very best
Nick -
Can anyone help me with a repeating pattern that is staggered?
Can anyone help me with a repeating pattern that is staggered and must be aligned perfectly while staggered. Is there a way to do this? I keep staggering it by eyeball and need it to be accurate and each row is offset.
My art board is 19.25x11.50 I have a repeating logo and name underneath (hard to see) I am setting this up for a print design to go onto tissue paper for insert into a shoe box. Any help is greatly appreciated?
Thanks,Option drag your object horizontally to make a copy or use Move and copy if you need a precise increment. The hit Cmd+D a few times to make duplicates with the same spacing.
Hit Enter again and make a note of the increment on a piece of paper. Cancel.
Select everything and use the same increment, now in a vertical direction, to make 2 further copies.
Take the middle row and move it horizontally by half of the increment. This means that the circles in the middle row are positioned horizontally half way between those in the other two rows.
Draw your defining rectangle so that its corners are on the centres of those 4 circles. (This gives you its right size but you may possibly need to move it a bit.) Send it to the back of your stack.
Drag those 8 circles and the rectangle to your Swatches panel.
(If you’re on Windows read Ctrl instead of Cmd and Alt instead of Option.) -
my ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?
Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.
-
When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?
There's always a way to reset the device jmn33! Thanks for keeping us in the loop. To process a full reset/restore on the device please visit http://vz.to/12TLCsR. Please keep us posted once this is completed, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT -
TS3694 error 21 can anyone help me with this?
Can anyone help me with an error message i get with my iphone, it say error 21 after trying to restore the phone though itunes.
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
i have an iphone 3gs and everytime i try to restore it on itunes it just keeps saying an unknown erroe has occured (29) can anyone help me with this??
Hello Laura,
Thank you for posting in the Apple Support Communities. I found an article that has information about Error 29:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Best,
Sheila M. -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your helpTry assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
Hey, when I connect either my ipod or ipad to itunes I get the prompt 'itunes was unable to load data class information from sync services. Reconnect or try again later. Can anyone help me with syncing my devices?? Thanks in advance
I am having the same issue, anyone else ?
-
"It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!
Mine does the same thing occasionally, is your phone jailbroken? Sometimes it will work if you delete the book and reinstall it or put your phone into airplane mode then turn it back off.
-
I can't find the 2G, 3G and LTE options after updating to iOS8.1, can anyone help me with this? I'm using iPhone5s
I have check on my service provider about the correct APN settings, but unfortunately doesnt work still..
-
I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?
Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Maybe you are looking for
-
I have recently got an iPad 2, I can no longer view/edit my Sony .ARW files in iPhoto, why?
I suspect that the problem is associated with iPad 2 and my sychronisation of iPhoto events to that device. I can no longer a single photo such that I can edit it, what is going wrong here? Actually I have closed down iPhoto and reopened, strange, I
-
Hello everybody, I wanted if possible some clarifications about the new software of iOS also available for the older iPhone 4. I waited until now before updating my iPhone 4 to iOS 7 and now, with the new version 7.1, I heard that it is faster and no
-
Not sure if this the correct catagory for this question but here goes - I use Handbrake to copy my own DVD's for viewing on Itunes/Iphone and Ipad The copy process involves selecting the one main movie title in handbrake However on a recent DVD there
-
QuickTime Trojan Virus Need Help
So, the oother day i was downloading the newest version of itunes. A window poped up aking me i wanted to let itunes access the internet, trusting Apple, i clicked yes (This was a mistake). Now i have trojan on my computer that changes my dektop back
-
Canvas, Timeline and Browser missing.
Hey, My canvas timeline and browser are all missing. In window their greyed out too. I cant even import any files?.. What do i need to do?. Thanks. the only windows i have is the Viewer: Slug and Tool Palette