Can anyone tell me what would happen if I left the photo field blank on the Cards app on iOS?
I like one of the letterpress designs but i'd prefer if the photo did not exist on the inside cover.
Does anyone know what would happen if I left it blank or of any way to remove it?
Thanks
Try here:
iTunes Store: My credit card's security code or zip code does not match my bank's records
Then try contacting iTunes
Apple - Support - iTunes - Contact Us
Similar Messages
-
Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
When I access my email from the iPhone, new messages appear only briefly and then immediately disappear, before I do anything. Only old messages that were already in my inbox are visible. I can't find the new messages anywhere -- they have not moved to Saved, Junk, Trash, anything. IT is like the iPhone just ate them. Can anyone tell me what I am doing wrong?
If you have a POP3 account this means that another "client" email program has retrieved the messages and deleted the messages from the server. You need to change the server settings on that device to leave the messages on the server.
If you have an IMAP or MS Exchange account this means that someone read the messages on another device and either deleted them or moved them to another folder. Or there is an automated script that moved them to another folder. -
I have recently installed 3.6.3 on a new machine running win 7 64-bit Home Premium. When I do a Google search and click on a link resulting from the search I get a "JavaScript Application Debug Error" followed buy a lengthy description (which I cannot copy to the clipboard). I cannot close the dialog box so the only solution is to close down Firefox and restart it. Any help gratefully appreciated!
== This happened ==
Every time Firefox openedI have recently installed 3.6.3 on a new machine running win 7 64-bit Home Premium. When I do a Google search and click on a link resulting from the search I get a "JavaScript Application Debug Error" followed buy a lengthy description (which I cannot copy to the clipboard). I cannot close the dialog box so the only solution is to close down Firefox and restart it. Any help gratefully appreciated!
== This happened ==
Every time Firefox opened -
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
i want to delete my iCloud account and get a new one. but i can not delete as it says that my iphone is being restored. could anyone tell me what would be the solution to my problem. i will be thankful to you..
You can go to icloud.com, open Mail, click on the gear shaped icon on the upper right and choose preferences, go to the Vacation tab and set up an auto response saying that the account is no longer in use. Then go to Settings>iCloud and turn Mail to Off on your device and stop using the account.
Incoming email to the account will receive your vacation auto response, and eventually the mailbox will fill up and no longer receive mail at all. -
Today I imported quite a lot of Audio CDs. When I wanted to listen to them I realised that most of them aren't in my library. And they did not appear in the recently added list either. Can anyone tell me what happened and where to find them? It's really strange because all the imorts definitely finished. Thanks!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?
The battery is fully charged so it is not the problem.
What happens when you use the MagSafe? -
We got a new Apple TV for Christmas and it works wonderful. However, my question is this. We are on a satelitte internet system and our bandwidth is limited. Can anyone tell me what effect it will have on using up my 10 megs of bandwidth? If I run over the 10 mgs, the service either slows way down until it is reset on the first of the next month or I have to purchase additional bandwidth and it can get expensive.
Any information would be greatly appreciated.If you only have a 10MB limit on the Internet connection you might as well not have Internet access and certainly should not attempt to stream anything.
If the limit is 10GB, then you will need to be careful with streaming as most video is 1-3GB for a one hour show. -
we have a movie downloaded on a laptop connected to the internet pluged into our router in the basement and an apple tv upstairs trying to play the movie through home sharing but it wont play. can anyone tell me whats wrong? it comes to the last loading page where it shows the desscription of the movie befor it acually plays.
It can come about without any change done by the user, and it's not just from other networks. The placement of the router can also affect performance. Also make sure router is up to date.
Apart from that would be the reboots. -
Can anyone tell me whats going on? Crystal Report Exporting issue
Hi,
I am having a issue with the way that CR exports a report. It was working GREAT until we restarted our server. At which point a 2 page CR exported to a PDF began to display enlarged and over 21 pages. The code never changed and if exporting from the VS CR tool it previews and exports perfectly. Can anyone tell me whats going on? Could a install of Acrobat Reader 8 caused this? or anything else for that matter? Any thoughts would be a great help cause it might help me think of something I have over looked.
Thanks
Jeremyit would not be install of Adobe that would cause this, however a changed printer driver may. Has the printer driver changed? Do you see any difference on the rpeort if you set the option "No Printer? (File menu, select Page setup).
When you say the report is now 21 pages, do you mean it has more data? Or has the format changed such that it is 21 pages long. The latter would again point to printer driver... -
When i called *611 to check my order statud for my 6+ it said 'revieved and activated'
Can anyone tell me what that means?Hello ElAnBr10! So sorry for any confusion over your order status. I would take that comment ("received and activated") to mean exactly as it sounds: The device was shipped, received and activated. In order to confirm that, I propose we take a detailed review. I've sent you a direct message as a follow up to your post. Please reply there!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
Can anyone tell me what this javascript is
The following script is at the top of the code for my index page, can anyone tell me what it is for and can I deletye it.
<script type="text/JavaScript">
<!--
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_nbGroup(event, grpName) { //v6.0
var i,img,nbArr,args=MM_nbGroup.arguments;
if (event == "init" && args.length > 2) {
if ((img = MM_findObj(args[2])) != null && !img.MM_init) {
img.MM_init = true; img.MM_up = args[3]; img.MM_dn = img.src;
if ((nbArr = document[grpName]) == null) nbArr = document[grpName] = new Array();
nbArr[nbArr.length] = img;
for (i=4; i < args.length-1; i+=2) if ((img = MM_findObj(args[i])) != null) {
if (!img.MM_up) img.MM_up = img.src;
img.src = img.MM_dn = args[i+1];
nbArr[nbArr.length] = img;
} else if (event == "over") {
document.MM_nbOver = nbArr = new Array();
for (i=1; i < args.length-1; i+=3) if ((img = MM_findObj(args[i])) != null) {
if (!img.MM_up) img.MM_up = img.src;
img.src = (img.MM_dn && args[i+2]) ? args[i+2] : ((args[i+1])? args[i+1] : img.MM_up);
nbArr[nbArr.length] = img;
} else if (event == "out" ) {
for (i=0; i < document.MM_nbOver.length; i++) {
img = document.MM_nbOver[i]; img.src = (img.MM_dn) ? img.MM_dn : img.MM_up; }
} else if (event == "down") {
nbArr = document[grpName];
if (nbArr)
for (i=0; i < nbArr.length; i++) { img=nbArr[i]; img.src = img.MM_up; img.MM_dn = 0; }
document[grpName] = nbArr = new Array();
for (i=2; i < args.length-1; i+=2) if ((img = MM_findObj(args[i])) != null) {
if (!img.MM_up) img.MM_up = img.src;
img.src = img.MM_dn = (args[i+1])? args[i+1] : img.MM_up;
nbArr[nbArr.length] = img;
//-->
</script>It's standard boilerplate javascript inserted by Dreamweaver when you add behaviors to your page. The block you posted contains three function definitions. The first covers preloading images (function MM_preloadImages), the second is what you need when an event in one place affects something in another (function MM_findOb) place on your page, and the third is for managing a group of checkboxes (function MM_nbGroup) I think!
To say whether you could delete them or not, we would have to see the rest of your page to see if you are using any behaviors that might require those functions. -
Can anyone tell me what this string is in the server permissions?
Can anyone tell me what the character sting is third from the top?
This is taken from the server app < select the server < storage < then edit permissions.
I feel like this is something simple, but all of my searches have turned up nothing.
Any insight would be greatly appreciated,
-TomI have recently deleted a user.
Can I remove them from the ACL with no effect to the system?
Is there a more efficient way to do that rather then by each individual folder and file?
Thank you,
-Tom
Maybe you are looking for
-
Creative Zen's clock gets reset after being plugged into the w
I bought the wall recharger for my Creative Zen 8 GB, as I had another MP3 player (SanDisk Sansa e260) die mysteriously after being plugged into the computer's USB port. The only complaint I have is that if I leave the Zen plugged in, after it finish
-
AP Serial Number Summary from WLC
I'm just wondering if there is a way to get an output of the serial numbers of all the APs connected to a WLC. I know they can be individually found in the WLC web interface or through the CLI but i'm hoping to find a way to see them all. thanks
-
I have 4 itunes downloads that have already been downloaded into itunes how do i get rid of them?
i have three movies two fame 2009 moives and a twilight movie plus an app (tap sharks) in my downloads but each of those have ALREADY downloaded into my itunes but every time i input my apple id and my password it all four come back to download agai
-
hello , about object links ,there is no sap object about QM inspection lot ,i want to create it . how to create sap object about QM inspection lot ? thanks!
-
Hi Friends We have data sources 2LIS_02_ITM, 2LIS_02_CGR, 2LIS_02_SCR and 2LIS_02_SGR activated and up and running delta properly. Due to some loads failed, we are doing re-init the loads.We are about to delete setup tables for purchase (02) componen