Can Auto-Promote be engaged during initial Meeting Setup?

We have usually gone about setting up our meeting as to where the Host can set the option to Auto-Promote Participants as they come in once the Meeting has been started. What we were curious of was wehter or not this setting could be set and remain so that anyone accessing the link would be Auto-Promoted without the Host being present. This way we could send the link to the requesting parties and they could send out to whoever they needed to in order for them to interact on their own free time without IT involvement. Any response would be a great help. Thanks!

The auto-promote will remain engaged until a Meeting Host disables it.
So long as you have Concurrent User licensing, the individual should be able to join the room and be promoted up to Presenter.
I have my test room set up with the auto promote on http://realeyesconnect.adobeconnect.com/openroom/. You should be able to join, and will see that you have Presenter Level rights.

Similar Messages

  • Users having access can't promote planning units during First pass state

    Hi,
    There is something I do not understand using the workflow in Hyperion Planning 11.1.2 : on first pass state, users having access can not promote a planning unit.
    Only the owner can promote... to himself !
    I'm lost !
    Please help.
    Thanks.
    Virgile.
    Edited by: 808808 on 7 déc. 2010 06:19
    Edited by: 808808 on 7 déc. 2010 06:22

    Hi,
    I tried first with a Planner user, and then with a Interactive user, and there is no difference.
    When I try to change the status, I have an error message that tells me that I can't change status of the planning unit.

  • HT201210 New iPad can't reach activation server during initial set up

    During initial set up my new iPad could not reach the activation server

    I wouldn't say that it is a common problem but it happens.
    Are you using the cable and a connecting to iTunes? If the iPad2 came with iOS 5 on it then OTA activation is possible.
    How are you trying to activate?

  • How can I access advanced settings during initial email account setup?

    Having just bought an iPad Air, I've tried to setup my email account (with John Lewis) on it during the initial startup process and repeatedly failed, both with SSL on and off. I imagine that I need to change the port settings or some other advanced parameter, but I can find no way of accessing them. It looks simple once you have the account set up but obviously that is of no help here. I apologise if I am being dopey but this is my first experience with an Apple product. Thanks for your help. Ignoramis

    Try below:
    https://www.apple.com/support/mail-settings-lookup/

  • 2008 R2 AD ... Specified replication partner, can I change this later during initial replication

    Hello - Healthy single forest, single domain with 100+ DC's.  Today, added new DC to the forest/domain and selected another DC in it's same site as it's replication partner during dcpromo, initial replication.  Turns out this other DC is in the
    same site, but in an OLD building that we are getting rid of and the link between the old and new is not good at all.  It's already done critical replication, now just progressing with initial full replication, but it's taking a LONG time (days). 
    Is there any way for me to switch the new DC to finish it's initial replication with another DC, that's on a much better network link?  (Or am I stuck as is with the extremely slow link?)  I would prefer to not kill this and do metadata cleanup if
    possible, prefer to sync w/another DC.  Thank you.

    Hello,
    If the connectivity is unstable, you will have problems in AD replication.
    You can use IFM to avoid replicating much information: http://blogs.technet.com/b/activedirectoryua/archive/2009/01/19/installing-from-media-ifm.aspx
    This
    posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Microsoft
    Student Partner 2010 / 2011
    Microsoft
    Certified Professional
    Microsoft
    Certified Systems Administrator: Security
    Microsoft
    Certified Systems Engineer: Security
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
    Microsoft
    Certified Technology Specialist: Windows 7, Configuring
    Microsoft
    Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
    Microsoft
    Certified IT Professional: Enterprise Administrator
    Microsoft Certified IT Professional: Server Administrator
    Microsoft Certified Trainer

  • "Updating the IPAM GPO failed" during initial IPAM setup

    Today I wanted to try the IP Address Management feature in Windows Server 8 beta, but I could bring my domain-joined servers into the IPAM Server Inventory.
    I tried to follow the
    steps in this Blogg to set up IPAM.
    The only server I can see in my inventory is the DC but if I try to switch it to "managed" I get a strange "No operation operation for ... failed" error:
    This happens after I already created the GPOs using Invoke-IpamGpoProvisioning and the DC's Group Policy Management Console shows the GPOs:
    Any Ideas how I can add the servers to the inventory and/or how I can fix the GPO issue?

    Hi Tiger Li,
    thanks for your hints!
    Yes, there might have been a connectivity problem between the IPAM server and the DC. And yes, the DC is the preferred DNS.
    I rechecked the settings with the steps in the Guide, and I got stuck at the following steps:
    - Configure settings for the IPAMGPO_DHCP GPO
    In Group Policy Management Editor, expand
    Computer Configuration>Policies>Windows Settings>Security Settings>Windows Firewall with Advanced Security>Windows Firewall with Advanced Security – LDAP://…>Inbound Rules.
    Right-click
    Inbound Rules, and then click New Rule.
    In the New Inbound Rule Wizard, click
    Predefined, and select DHCP Server Management from the drop-down list.
    Click
    Next.
    Well, there seems to be no predefined rule "DHCP Management":
    Any idea how to fix that?

  • Lower limit can only be changed during initial entry, Message no. NR651

    Hi Experts,
    As per the number ranges limit values defined in the system for the planned orders, there is a need to increase the number ranges.
    System is not allowing us to change the limit values of the Planned orders in MD91 and showing the Message no. NR651.
    We have also searched for the available threads in SCN and other sites, but didn't find the root cuase link for this error.
    System message:
    Lower limit can only be changed during initial entry
    Message no. NR651
    Diagnosis
    You have tried to change the lower limit of an interval which has a non-initial number status.
    System Response
    The change was not executed.
    Please guide us how can we increase the number ranges for planned orders.
    Thanks in advance.

    Hi,
    You can create a new number range or change in transaction OMi2 or in MD91.
    Assign the 02  by clicking number range in OMi2
    or in transaction OPPQ  click on number range & select the 02.
    Do the changes as described and analyse the results. Ensure that while testing no body is creating the planned orders.
    Regards,
    Narresh

  • Since I joined creative cloud, I have not been able to sync. Why the difference? Worked good during initial trial. Also I had installed the Mosaic app before Lightroom mobile came out and I cannot seem to get rid of it. How can I get mosaic out? I have ca

    Since I joined creative cloud, I have not been able to sync. Why the difference? Worked good during initial trial.
    Also I had installed the Mosaic app for ipad before Lightroom mobile came out and I cannot seem to get rid of it. How can I get mosaic out? I have cancelled, I have deleted, I have looked through the files for visible remnants.

    The sync count is 60 and static. The total number synced so far is 500+. None have been synced from the ipad except for corrections made there on those already synced.
    I have deleted the Mosaic app from all machines and checked the library folder and have contacted the Mosaic tech support and they have discontinued my subscription. I still get mosaic messages on initiating Lightroom and sometimes at closing.
    I have not tried to sync fewer yet, but some catalogs that I have tried are smaller numbers. Initially, it did well on good connections. Nothing works on my home connections over satellite.

  • Auto-Promote Participants to Presenters is not working

    Hi All,
    I'm new to Adobe Connect and we are test driving it to see if we should use it for trainging as part of our virtual classrooms.
    So far I'm really excited by what I see as it seems to be much more training oriented than WebEx.
    However, I've come across a really big stumbling block.
    I want students to contribute and share without having to individually promote them to presenters.
    I found the option under 'Manage Access & Entry' to 'Auto-Promote Participants to Presenters' and thought this issue was solved.
    However, it worked the first time I tested it but ever since it does not work.
    When someone logs in as a guest they are logged in as a participant and NOT promoted to Presenter.
    I've created a new meeting room with the same results.
    I've specified that anyone can log in with the link and the 'Auto-Promote' is definately on.
    Any ideas about why this is not working?
    Many thanks,
    Aimee

    It sounds like you are using the Meeting Host licensing. This requires that a member of the Meeting Host group must be present in the meeting to fully activate the room functionality. The simple version of that is that no one will have higher than Participant rights until a member of the Meeting Host group joins. Once that condition is satisfied, then all other attendees will be promoted to Presenter, since you have the auto-promote function on.

  • New iPod Touch stuck in recovery mode during initial setup

    I am trying to set-up my daughter's new iPod touch 5th Gen. When you try to connect to iTunes message says "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes". Even when you disconnect from computer it is stuck on screen telling you to connect USB to computer.  Two of her friends also got this iPod for Christmas and are having the same problem...during initial set-up. I've tried the system updates 3 times. iTunes recognizes the device, but the computer is not recognizing it as a drive. I've tried both my Mac and my Windows PC.  I've tried hard resets.  You can't remap the drive because the device doesn't show up. Most of the apple support topics address if iTunes doesn't recognize the device in conjunction with it not being recognized by the drive.  Obviously a problem with the new update because several brand new iPod touches wouldn't be having the same problem. Please help if you've found a solution. Happy New Years! 

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Does the iPod charge when connected?
    Have you tried another computer?
    Have you tried another cable?
    Some users have reported defective Lightning cables came with their 5G iPod. Some did not word from the beginning and for some the cables failed after a very short time.

  • Logic crashes during "initializing CoreAudio" after installing OSX 10.5.1

    Hi,
    After installing Leopard (10.5.1) Logic Pro 8 crashes during "initializing CoreAudio". (Logic Pro 7 freezes)
    On OSX 10.4 it worked great.
    As far as I can see now Logic Pro is the only program with this problem.
    (RAX works fine!)
    Is there someone with the same issue?
    Or with a sollution?
    Greetings,
    Michiel

    Thanks for your reaction.
    Althoug it turned out that I didn't had any digidesign Plugins it indeed was an plugin compatibillity problem.
    Rewire was the one.
    An update of Melodyne did the trick.
    Thanks again (stupid enough I hadn't thought about 3th party plugin compatibillity at all)
    Greetings,
    Michiel
    *For people with the same problem, reading this toppic, but without Melodyne (and its update)
    deleting the components from the folder
    "Library/Application Support/Propellerhead Software/ReWire"
    works as well, but of course disables the use of Rewire.

  • During initial setup, I deleted the additional colored options in the Calender application. How do I get those colored options back? Thank you!!

    During initial setup, I deleted the additional colored options in the Calender application. How do I get those colored options back? Thank you!!

    Sounds like you have the print dialog minimised, as shown.
    If you click the triangle next to the printer name, this will expand the print dialog and from this view you can see all the menu options as mentioned in the guide.

  • HT3986 Windows wants to restart several times during initial installation.  How do I restart it in windows, so I don't lose my installation progress?

    Windows wants to restart several times during initial installation.  How do I restart it in windows, so I don't lose my installation progress?

    It would normally restart in to Windows but if you need to do it manually you can hold the Alt key as the chime sounds and then pick the Windows hard drive icon.

  • WsCompile script failed during initial client generation

    Hi all,
    I have NetBeans IDE 6.5 and GlassFishV2 installed on my pc. I tried to add a new web service client from an existing WSDL url to my java project but I get this error during adding the web service: “WsCompile script failed during initial client generation.”
    Why do I get this error message?
    Can anybody help me please?
    Note: WSDL made by Weblogic 11g and I have Jax-RPC 1.6 installed.

    Have you tried [XML RPC|http://ws.apache.org/xmlrpc/index.html]

  • Error during Initial Provisioning/Modify: Inconsistency with address

    Hi all
    During Initial Provisioning (and also after any modif) of some users I get the following errors:
    E:Failed storing DDIC
    E:Exception from Mod operation:Inconsistency with address
    I:MX_PERSON has valid company address assignment.
    I:The entry with MSKEY "69802" has MSKEYVALUE "COMPANY:SAP_IDM_DEFAULT".
    E:Failed storing SAP*
    E:Exception from Mod operation:Inconsistency with address
    I:MX_PERSON has valid company address assignment.
    I:The entry with MSKEY "69801" has MSKEYVALUE "COMPANY:SAP_IDM_DEFAULT".
    E:Failed storing SAPCPIC
    E:Exception from Mod operation:Inconsistency with address
    I:MX_PERSON has valid company address assignment.
    I:The entry with MSKEY "69802" has MSKEYVALUE "COMPANY:SAP_IDM_DEFAULT".
    Surprisingly they're all "special users"; standard users are provisioned without errors (not related to the company address).
    Unfortunately it's not mentioned in the logs which system has these inconsistencies, because mostly provisioning works well (for these users).
    Questions:
    1. Does anybody know how I can resolve or what combination of values lead to this error?
    2. Where can I add a Debug-Line to see which system(s) fail?
    Any help appreciated
    BR
    Michael

    I solved this.
    First I added an Initialization script to the UpdateABAPUser-Pass which told me the repository and prints it as warning ot the job log.
    Then I took a look at these ABAP-Systems using SU01 and realized that SAP*, DDIC and SAPCPIC don't have the mandatory "Lastname" set, so SU01 says "Inconsistency with address" (DE: "Schiefstand bei Adresse").
    After I set this once on ABAP-side the UpdateABAPUser-Task ran fine.
    But still I would have expected that IdM sets this attribute as long as it is set on IdM-side, especially since it is mandatory in the destination system. At least it could provide a more informative error message.
    Thanks for any help.
    BR
    Michael

Maybe you are looking for