Can Billing Quantity be Different from Order Quantity in Order Related Bill

Hi
I have encountered a scenario here at my client.
My client wants that the billing document should be created with reference to Sales Order but only that value of invoice should be relseased to accounting which is delivered.
For example,
Sales Order = 10 units
Billing Document= 10 units
Delivery = 5 Units
Released to Accounting Value = Eqvalent to 5 Units which are delivered.
Reason why Sales Order and Billing should be of same quantity is that when a customer asks for an order confirmation, he requires Billing document for legal purposes but they want to hit their G/L's only on the basis of Quantity Delivered. As they are not aware when the customer come back to pick his remaining quantity. So they do not want to hit their accounting based on Sales Order quantity.   
Any ideas?

Hi,
If billing has to be posted only after delivery, it is a clear case of Delivery related Billing. It is not order related billing.
You SHOULD have the following scenarios here.
Have a normal order and have  Proforma invoice linked to it with the condition that the quantity in proforma invoice should be the same as order.
However do the actual invoice after doing delivery for the order. In this case, the posting will be only for the quantity delivered. You can change the quantity in proforma invoice when you are creating the same from order. So that reqmt is also taken care of.
I dont think of any other scenario where you can meet both reqmts.
Hope this helps

Similar Messages

  • Quantity is different from sale order and delivery

    Hi,
    Gurus,
    Quantity is different from sale order and delivery.
    I identified the Material in the sales order, the item category for this material as BOM.
    I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
    Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
    My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
    My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
    Note:- The material X is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
    The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
    Guide me GURUS.
    Thanks and Regards,
    ANAND

    Hello Rumar
    I guess you entered the text manually in the sales order. The Ship-to may not be having any text, but the Sold-to may be and it may be coming from sold to.
    In transaction VOTXN, check the access sequence for the text type id and see which one takes precedence - one from customer master or from the order by checking the order of accesses.

  • RZ20 PO Error" Quantity delivered differs from qty. invoiced "

    Hi All,
    In SRM 5.0 , Extended Classic Scenario . PO Error in Process , RZ20 Shows Error" Quantity delivered differs from qty. invoiced " for the Changed PO. What must be the reason. GR based Inverification is Ticked is ticked in old version of PO.
    Answers will be rewarded.
    Thanks & Regards,

    Hi
    As Yann told,
    OSS Note 1058510  -  Limit Order Line can be deleted when open confirmation
    will surely help.
    Otherwise look
    Similar OSS Note 61227 - ME22 MR11 Items with non-valuated goods receipt
    Regards
    - Atul

  • Quantity delivered differs from qty invoiced

    Experts,
    SRM 5/Ext classic
    For one of the line items in SRM PO, we wanted to set the deletion indicator which we have done by maintaining table entry DEL_INDICATOR....but this deletion indicator is not visible against line item in ECC PO when we transferred the SRM PO via FM in SE37. We get an error message in RZ20 "Quantity delivered differs from qty invoiced "
    Any clue how to resolve this?
    Thanks & Regards

    and why are you not deleting the line item from portal?
    if not, then i think you should use BBP_PD_PO_ITEM_DELETE_LOCAL FM rather than setting the indicator manually...

  • Can I get a different color iPhone if I order a replacement through insurance?

    Can I get a different color iPhone if I order a replacement through insurance?

        hoseykel,
    Thank you for reaching out to us. We are more then happy to assist with this question. When getting the device replaced through insurance, the replacement calls for the same make and model, which includes color. Now if they are not in stock of the same color then they will offer a different color, but normally only in that situation. Let us know if you have any other questions.
    Thank you,
    Tony_VZW
    Please follow us on twitter @VZWSupport

  • J1IEX - Available Credit quantity s different from the defaulted 0.000

    Hi All,
    We are doing the GR without reference to PO(501 Mvt type)  and then capturing excise in J1IEX.
    We get below warning message when we capture the excise invoice in J1IEX,
    "Available Credit quantity 12.000 is different from the defaulted 0.000!
    Message no. 4F285"
    Please help me to know, what does this mean and whether we can post the J1IEX.
    Regards,
    Praveen

    Hi
    check following link it may helpfull to you
    [J1IEX - Capture Excise Invoice without Purchase order.;
    Regards
    Kaials Ugale
    Note : Do not give links while answering queries.
    Edited by: Jeyakanthan A on Jul 11, 2011 12:44 PM

  • Sales order status after resource related billing

    Hi All,
    When I am creating a resorce related billing debit memo request from DP90 with reference to a sales order, the status of my sales order item is not getting updated.
    Since i am referencing my SO items in DP90, ideally the 'Referencing status' for the order items should get as 'Fully referenced'
    Kindly help
    Aribis

    Hi Aribis
    IN IMG, in Sales and Distribution->Sales->Sales Document->Sales Document Item-> Item category, check the item configuration - one of the first fields should be completion rule, check tht it has the right completion rule, e.g. completed after full quantity has been referenced.
    hope this helps
    Kikas41

  • Sales Order Status for Resource Related Billing

    Hi
    The Resource related billing is done based on the costs accumulated on account assigned WBS Element. The WBS Element system status is set 'Finally Billed'. The overall status of Sales Order line item is still 'open' and does show up in 'Open Order' reports.
    SAP vide their note 439288 recommends running report SDVBUK00 to correct the sales Order item status. However this note is applicable only upto 4.6C. Our system in ECC 6.0. We tried running this report and did not get desired results. We checked the program and discovered that the corrections suggested as per above note, are not available.
    Is there any new SAP note applicable for ECC 6.0 needs to be applied ? Or is there any other report needs to be run in case of ECC6.0?
    Thanks in advance
    with regards

    Hi Aribis
    IN IMG, in Sales and Distribution->Sales->Sales Document->Sales Document Item-> Item category, check the item configuration - one of the first fields should be completion rule, check tht it has the right completion rule, e.g. completed after full quantity has been referenced.
    hope this helps
    Kikas41

  • Marker Count in Timeline differs from actual quantity

    I am adding Chapter Markers to a project and although there are twenty thus far, when pressing 'M' to add the next marker it shows a far greater amount. I.e., the next Marker I am adding will actually be number 21 but when pressing 'M' once it states "Marker 65". So forth and so on. Why is this?
    Thanks.

    It's the number of markers you've added in the project. If you delete markers the numbers are still added and continue to increment upward.

  • PLANT FOR GOODS ENTRY DIFFERENT FROM PLANT IN PURCHASE ORDER

    Good Morning.
    My customer, asked me, if it was possible to make a purchase order in a single company and relevant purchase organization and plant, and the  goods entry for another plant referred to another company.
    Ex. Purchase Order for Company 01 and Plant 01
    Goods Entry for Company 02 and Plant 02.
    Thank you in advance for your cooperation
    Francisco

    Hi Francisco
    It is not possible to have PO on 1 Co and Plant 1 and GRN on Co 2 and plant 2.
    Whereas it is not logical also.
    Because Plants are Valuation area and ,If you have balance sheet on valuation area then in that case you can understand what would have happened if this scenario would have been feasible.
    Well what you can do..
    Create PO on Co Code1 and Plant 1
    Do MIGO ..so u will receive material in Plant 1 ...eg store location 1
    Then after that do Intercompany Stock Transfer
    A number of procedures are available to enable you to transfer materials from one plant to another:
    Stock Transfer Between Plants in One Step
    Stock Transfer Between Plants in Two Steps
    Stock Transport Order Without Delivery
    Stock Transport Order with Delivery via Shipping
    Stock Transport Order with Delivery and Billing Document/Invoice
    Please click on the below link to get more info on Stock transfer
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm
    let me know if you need more info
    Regards
    Shailesh Meshram
    SAP MM/SNC

  • Can I purchase 4 different iphoto books in one order

    Can I purchase 4 differnt iphoto books in one order

    no
    each different project is a different order - only multiple copies of a single project can be ordered at one time
    LN

  • How can I stop my iPad from mixing up the order of photos when I sync from my PC?

    Hi-
    I have a 1st generation iPad. I have noticed that when I sync photos from my PC (Windows 7) to the iPad (using iTunes) that the pics do not end up in the same order on the iPad that I had them arranged on my PC. Mostly this is not too much of a problem. But recently, I have a batch of photos that really need to be in a particular order. I spent a lot of time on my PC naming them in such a way that they'd STAY in the order I desire. There are about 185 of them, so this took a lot of work! How can I keep them in the order I want when I sync to the iPad?
    Thanks for your help-
    Betsy

    Hi again-
    Just as a final follow-up on this topic, I have been able to change the "date taken" property of each photo file without downloading any extra software. In the Windows Explorer, all I have to do is select the file and then I can edit the date in the properties pane at the bottom of the window. Since I have to change each file to a unique date so that I can control their order on the iPad, I have to do this all by hand anyway, so I did not spend much time looking for a software to do it.
    Just in case this might help someone else, I thought I'd post it.
    BW

  • Can I give a different address for delivery when ordering a book?

    When ordering a photo album via iPhoto, can I ask for delivery to another address than my own?

    @sfhowes: That sounds just like what I'm looking for. Thanks.

  • Delivery header billing status is different from any of items.

    Dear Friends ,
                   I have a peculiar case . There is a delivery document which is usually not relevant for billing . Each of the items in the delivery is showing billing status as 'blank' which means not releavant for billing . The item category also not relevant for billing . But at the header level , billing status is showing as 'A' , not yet processed .
    could somebody explain what could be causing this ?
    Thanks and Regards
    Raghav.

    Hi Raghav
    This could be because in your  delivery document  , some line items may not be relevant for billing and some line items might be relevant for billing  and that is the reason at header level , it is showing that billing status is not yet processed (A)
    So check the item category for each line item (relevant for billing or not)
    Regards
    Srinath

  • Can tablespace block size different from the database block size

    I have a 10.2.0.3 database in Unix system.
    I created a database used default block size of 8k. However, the client application requires 16k block size database. Can I work around to create a tablespace that has 16k block size instead of drop the database to recreate the database.
    Thanks a lot!

    As Steven pointed out, you certainly can.
    I would generally question, though, whether you should.
    - Why does the application require 16k block sizes? If this is a custom application, it almost certainly doesn't really require 16k blocks. If this is a packaged application, it probably doesn't really require 16k blocks. If 16k blocks are a requirement for support, I would wager that having the application's objects in 16k block size tablespaces in a database with 8k blocks would not be supported.
    - Mixing block sizes increases the management complexity of your database, potentially substantially. You need to specify a completely separate buffer cache for the 16k blocks, a buffer cache that would not be integrated with Oracle's automatic SGA management functionality. Figuring out how to split up the buffer cache between 8k and 16k blocks tends to be rather hard (particularly if the mix changes over time), which means that DBAs are going to be spending substantially more time managing the SGA in this sort of system than in a vanilla 10.2.0.3 system. And that DBAs will have many more opportunities to set things up incorrectly.
    Justin

Maybe you are looking for

  • Multiple apps failing after update to OS 10.6.8

    Process:         iTunes [2521] Path:            /Applications/iTunes.app/Contents/MacOS/iTunes Identifier:      com.apple.iTunes Version:         ??? (???) Build Info:      iTunes-1113011001003008~1 Code Type:       X86 (Native) Parent Process:  laun

  • How do I include the discussion lines fron Disqus in a pdf created from a web page?

    Space is reserved for the text material but the lines do not appear to have been included.  here is the specific web page in question. Katy Perry Talks Taylor Swift Feud in 'Billboard' Super Bowl Issue | Katy Perry, Magazine, Taylor Swift : Just Jare

  • Setting up tax in R12

    Hi, I have to setup new tax structure. My requirement is as follows: we have vendors outside Switzerland, we have to pay VAT on the payment of every purchase. In order to post these VAT amount paid to vendor of different countries we need to define n

  • How to select value from DropDownByKey?

    Hi all, In my application, I am using 2 Bapis. The first one just for displaying data with all material numbers. The second Bapi is for inserting the Sales data to database. Both of them have Material number. Now from the first Bapi, I displayed all

  • Combine query and xml recordset

    I'm trying to see what's the best way to combine a query and XML recordset. Database: TableA FieldA, FieldB, ... Joe, 1 Bob, 2 XML from Web Service <record id="1" att="Job A" .../> <record id="2" att="Job B" .../> Need to link TableA.fieldB to matchi