Can capture the service control message with LabWindows/CVI ?

Using the Instsrv.exe and the srvany.exe tools to register my application as a Windows service, expecting  the application will follow  the OS starting. Due to the service can be interrupted through the manual way, for example, in the service window, one can start o stop a service, so hope to receive the service stop message in my CVI application.
The application use "RunUserInterface()" to support the message  procedure, onece can capture the service stop message, I can use QuitUserInterface() to complete the application. Is there any way to do that? Thanks.
David

Hi,
The NI-CAN driver installs some examples for both the frame API and Channel API (NI-CAN 2.0).
The typical installation directory is:
C:\Program Files\National Instruments\MeasurementStudio\CVI\samples\nican.
It might change depending on where you installed CVI.
DiegoF

Similar Messages

  • I'm looking for examples of CAN control code with LabWindows CVI

    I'm looking for examples of CAN control code with LabWindows CVI.

    Hi,
    The NI-CAN driver installs some examples for both the frame API and Channel API (NI-CAN 2.0).
    The typical installation directory is:
    C:\Program Files\National Instruments\MeasurementStudio\CVI\samples\nican.
    It might change depending on where you installed CVI.
    DiegoF

  • Hello, I want to use version controlling software with Labwindows.

    Hello All.
    I want to use version controlling tool with Labwindows/CVI. Actually version controlling tools work for text files and by using the tool i can do version controlling of my .c and .h files in Labwindows/CVI project. But is there a way to do version controlling of .uir files also. Version control tool can detect the changes made in .uir file but is there any tool that can be used to compare and merge .uir files too just like text files operation for version controlling.
    Regards

    Hello Moshi,
    Personally I never understood how the integrated version control system of
    CVI works, but SVN (and TortoiseSVN) works fine with CVI projects.
    UIR files are treated as binary, as they should be, and that's about all.
    You could put the .tui file under version control instead, but I don't think
    it's worth the bother.
    Guillaume Dargaud
    http://www.gdargaud.net/

  • The applicatio​n uninstalle​r ,created with Labwindows CVI, doesn´t work after upgrading to 2010 version

    Hi,
    I have been working with Labwindows CVI 2009 with no problem but after upgrading to 2010 version I have the following problem:
    When i´m going to execute the unistaller, either from Windows Control Panel or directly from the uninst.exe icon, it doesn´t work. The PC thinks a few seconds and does nothing, and it happens with all the applications I build with Labwindows CVi 2010.
    Thanks,
    Asier
    Solved!
    Go to Solution.

    Hello -
    Are you installing these distributions on a non-English operating system?  If so, the first thing to try would be the workaround listed on this known issue. 
    The known issue only lists Italian OSs as the troublesome OS, but it could actually happen on many different non-English OSs. I will update the text accordingly the next time I update the known issues list.
    NickB
    National Instruments

  • HT1695 IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

    IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

    I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
    However to my disappointment,  landed back at the same status which says
    We're sorry, we are unable to continue with your activation at this time.
    Please try again later, or contact customer care
    I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
    The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
    Guys ... Need the data desperately ... Can anybody please help???

  • How to change a setting in the Java Control Panel with command line

    Hi,
    I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
    I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
    Edited by: 897133 on Nov 14, 2011 7:15 AM

    OK figured it out. This is for the next person seeking the same solution.
    When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
    Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
    __deployment.config__
    It should look like this inside:
    *#deployment.config*
    *#Mon Nov 14 13:06:38 AST 2011*
    *# The First line below specifies if this config is mandatory which is simple enough*
    *# The second line just tells Java where to the properties of your Java Configuration*
    *# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
    deployment.system.config.mandatory=True
    deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
    If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
    How?
    Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
    Add this line:
    deployment.security.SSLv2Hello=true
    Maybe you want to disable Java update (which is a big problem for enterprises)
    Add these lines:
    deployment.javaws.autodownload=NEVER
    deployment.javaws.autodownload.locked=
    Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
    #NoTrayIcon
    #RequireAdmin
    #Region ;**** Directives created by AutoIt3Wrapper_GUI ****
    #AutoIt3Wrapper_UseX64=n
    #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
    Func _JavaConfig()
         $ConfigFile_1 = @TempDir & "\deployment.properties"
         $ConfigFile_2 = @TempDir & "\deployment.config"
         FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
    FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
         FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
         FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
         Sleep(10000)
         FileDelete(@TempDir & "\deployment.properties")
         FileDelete(@TempDir & "\deployment.config")
    EndFunc
    _JavaConfig()
    Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
    Edited by: 897133 on Nov 16, 2011 4:53 AM

  • TS3510 Can't receive emails or messages with FaceTime can anyone help please thanks

    Can't receive emails or messages with FaceTime can anyone help please thanks

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
     Cheers, Tom

  • Where is the service impl referenced with JaxRpcPortProxyFactoryBean

    I have an "ad hoc" web service (not using standard listener infrastructures) in WLS 8.1.4. The business logic of the service is implemented with Spring. I'm looking at my options for porting this to WLS 9.2.
    I see the JaxRpcPortProxyFactoryBean as perhaps the standard way to define a web service interface in Spring. What confuses me is that I don't see where in this bean definition you specify what class actually implements the business logic for the service. The example I saw in the Spring documentation seems to gloss over this.

    Hi Elad,
    As per you ques <b><When I'm looking for this service in business service list I'm not found any service with this name></b>
    Make sure if you are using the business service or business system?
    For both the cases you can find it in ID as given below:
    Under TAB <b>Objects </b> -
    > <b>Service Without Prty</b> -
    > <b>Business System/Business Service</b>
    Once you find it (service/sysem) you can delete the CC from it by right clicking on CC & pressing Delete option.
    Regards,
    Sarvesh

  • Billing user exit to overwrite the service rendered date with billing date

    Hello,
    My client would like to determin the rebate conditions based on billing date. However, the system only uses the service rendered date for rebate determination.
    Therefore, I am trying to overwrite the service rendered date with billing date at the time of billing creation.
    Could you please let me know what user exit I can use?
    I can't user the user exit RV60AFZC because the billing date is not determined when this user exit is running.
    Your help would be appreicated! I will give you good points! Thanks

    Hi Londa,
    Try using one of the following includes for your requirement.
    (a.) rv60afzz
    (b.) rv60afza
    (c.) rv60afzb
    (d.) rv60afzd
    (e.) BAdi SD_CIN_LV60AU02
    or if you are working with ECC 6.0 use the Enancement Spot ES_SAPLV60A available from SE80 by giving package VF and then selecting Enhancements and then expanding Enhancement Spots
    Hope these are helpful to you. Reward accordingly.
    Thanks and Regards,
    Maddineni Bharath.

  • Could not install DPM agent on Secondry site DPM could not connect to the Service control manager : ID 33221

    Hi,
    We have two DPM 2012 R2 server installed at Primary and Secondary site Windows 2012 R2 installed.
    We need to Protected Primary DPM from Secondary DPM.
    When install DPM agent got error from secondary DPM console.
    “DPM could not connect to the Service Control Manager on these servers ID: 33221”
    Checked till now :
    Visual C++ redistributable installed.
    Checked DNS A record and both server can ping each other,
    Widows Firewall off on both servers.
    Net stop mpssvc ( Windows firewall service)
    sc \\Server1 query
     àable
    to see result
    Thanks,

    Hi
    You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
    Do you have any other AV software that have firewalls built in?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Hello I have iPhone 4s, i'm trying to use the service under messaging called text message forwarding it's asking for a code?

    Hello I have iPhone 4s, i'm trying to use the service under messaging called text message forwarding it's asking for a code from my iPad. What code?
    I am getting iMessages going to my iPad but not my iPhone. I am hoping this feature will fix my issue. However I do not know where to get the "code" from my iPad.
    any idea?
    thank you
    I Have the 4th gen iPad, iPhone 4s and the latest iOS updates on both.

    Chrisj4203, thank you for your kind answer.
    I have done a lot of restores to the Iphone, and resets also.
    I;ve done holding both buttons as you sugested, but there is no signal appearing.
    I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
    I don;t knoe what todo.
    I have been trying for more than one mont.
    I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

  • We purchased an Acrobat 9 Professional and no longer have the installation media. Where we can download the right software according with the license we have?

    We purchased an Acrobat 9 Professional and no longer have the installation media. Where we can download the right software according with the license we have? We want to install it on Windows 7 64 bits

    http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Be sure to make a backup of this download to a CD or backup HD for the future. You will still need your S/N.

  • I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck

    I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck with the eraser again. What can I do? Joost van Santen

    Have you tried resetting all tools?

  • Do we have any infotype which can capture the present Cost to Company (CTC)

    Dear guru's,
    Do we have any infotype which can capture the cost to company and if something is there can we utilise that in Recruitment module r/3.
    Appreciate some quick responses.
    Regards,
    Rajasekar.

    Yeah sure.. usually we dodnt have any tracing to get outgoing call.. even though we have 700 mins we use 400 in one month and 1000 in next month.. to balance this it will be very useful but from the couple of comments this app is not recemended ..and ther was not rating and contact option indeed
    anyway thanks for your time ..Please let me know if u find any app which suits my case .. thanks again!!

  • Where we can see the settings for Message No L1615

    Where we can see the settings for Message No L1615
    Appl. Area              L1
    Message Number     615

    Hi
    This message cannot be maintained as a warning using the Configuration.
    This message is allowed only AS AN ERROR.
    Thanks & Regards
    Kishore

Maybe you are looking for

  • SAP EH&S 4.6C Migration to SAP ECC6

    Hi All, We are having separate SAP R/3 instance for EH&S module (4.6C system). The transactions system is SAP R/3 4.7 system and is due for ECC6 upgrade. Just want to know 1.     Has anything changed in EHS module from 4.7 to ECC6. If yes, what? 2.  

  • Set document to be seen one page at a time but print four to a page?

    I would like to create a pdf (from a PowerPoint presentation) so that when it is viewed on the web it is seen one page at a time but when it is printed it prints four to a page. It is possible to put that in pdf document settings or do I have to rely

  • Extract a page from a PDF document

    Can I extract a page from a PDF using Preview? Under Windows using Adobe Acrobat Pro you can extract a page from a PDF, so I was wondering.

  • Giving error for NearCache Configuration-java.lang.IllegalArgumentException

    Hi, I tried to use near cache topology but it is giving the below error(I am unable to masp the near cache) java.lang.IllegalArgumentException: Unresolved reference to scheme: example-local at com.tangosol.net.DefaultConfigurableCacheFactory.resolveS

  • Cannot see iPhone movies within Aperture

    Movies just show up as black fields and a warning that it is a unsupported video format. But I only use the iPhone 4 at the moment. That should be no problem at all -- right? Thanks for any help!