Can Central System administration be configured for JAVA systems?

I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
Can some one tell me, can it be configured for JAVA systems like Portal?
Thanks
Aditya

Hello Aditya
Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

Similar Messages

Earlywatch Alert configuration for Java system

Hi All,
I have configured the Solution manager diagnostics for early watch
alerts for a java system by following the guide "EWA for non-ABAP
components" in note 976054.
I am able to get the EWA reports manually, i.e by downloading
the "service download" file from http://<host-name>:<port>/smd/services
and uploading it in T-code DSA in Solution manager system and by
generating the "word" file over there. But i require the automatic
configuration to work. This automatic reports generation is not working presently.
Is there any separate configuration to be done for the automatic report
generation for Non-ABAP systems.
Waiting for any one of your help,
Points will be awarded for any useful solutions.
Regards,
Phani.

Hi,
Normally you have nothig to do, the report should be generated each week automatically. But you have some checks in document attached to SAP Note 976054 to see if everything is activated (SDCCN, NONE Destination, etc...).
Regards,
Stephan

Configuration of EWA reports for java systems.

Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!

Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks

Database statistics for Java system in CCMS (RZ20)

Hi All,
We have configured CCMS for JAVA system, but unable to view the Database statistics like Tablespace size, Free space, Backup, Performance etc., for it.
We are able to see these statistics for ABAP stack.
Is there any possible method (or) class to view these statistics?
We have even created a new rule-based monitor with class CCMS_DB_mcmtc and CCMS_DB_space_mscl but in vain.
Even if we cannot view these in RZ20, do we have any other methods like Netweaver administrator or Introscope or some other means....?
Waiting for some help......
Regards,
Phani.

I don't think there is any separation between CCMS and other systems, all use one database. If you use MaxDB use Database Manager, if smth like SQL Server or Oracle use standard tools of this vendors, like Enterprise Manager third party tools also helps you, cause I don't see any difference between

How to configure Sun Java System Application Server Enterprise Edition 8.1

hi all,
How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
I have installed jes for my windows system.. so that i have removed platform version of Application Server..
I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
but i couldn't;

Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.

GRC AC 10 (RAR/CUP/ERM) configuration for EP system

Hello Gurus,
We are aware of configuring RAR/CUP/ERM in GRC AC 10 for ERP system(back-end)
Are there any documents /links to provide information on configuring the above components for EP system ??
Or rather specific which of the following configuration is possible for EP system ?? CUP /RAR/ ERM ??
Also going further , is there any way in which we can configure the same for BO system ??
I am not quite sure if there is any PLUG-In as such which is available for BO system or not .
But in my opinion there is no need to perform configuration for BOBJ system as the roles in them are imported from Backend system (ERP/BI etc) , hence if these roles are already taken care during ERP system cleanup and SOD analysis , there should be no need to configure seperately RAR/ERM/CUP.
Please provide your comments.
Regards,
Victor

Hello Prasad,
Thank You for your quick response .. the info was quite helpful.
Will you please put some light on aspects of integrating AC 10 with BO ??
Is there any connecter available for it?? Which scenarios are possible ??
Humbly Requesting your help.
Thanks in advance.
Regards,
Victor

EWA alert report for java system shows wrong data

Hi,
In our solman system, EWA alert reports are configured every week for all the production systems (both ABAP and JAVA). Recently oracle database was upgraded from 10g to 11g in all the production systems. The EWA alert report for ABAP systems is correctly taking the 11g database details and is suggesting parameter changes. Unforunately the EWA alert report for Java systems is still pointing to 10g database and is suggesting the parameter changes for 10g only but the systems are on 11g.
In SMSY, the database of the java systems is maintained as 11g only and not 10g. STill we are not sure where the data is being fetched from.
Please help me in finding the issue.
Regards,
Ragav

Hello,
iNote 1482818 would be iapplicable if not java checks are being made. You are not reporting no java checks, you are reportijng the check is being performed, but has the wrong value. When you updated the database dis you perform Solman_setup, Mnaaged system setup?
The reason I ask s that is what prepares the java side for EWA. For isntance if you had on old version of ST-SER such as 700_2008_2 then it does not know about Oracle 11.2....but that is on the ABAP side, you would need ST-SEr 701_2010_1 to
recognize ORacle 11.2 on the ABAP side.
So while I am not 100% sure in this specific instance, it seems logical that if the Java side isn't recognizing the Oracle Database version ( which means it is making this check) then you may need to run the Solman_setup, Mnaged system setup to pick up the ability to detect a new version of Oracel on the Java side.
It is certainly worth the try.
Regards,
Paul

EWA for Java system / portal

Hi,
We have configured EWA for ABAP systems, help required to configure EWA for Java / portal systems
Ours is solman EHP1 - support pack level 6
Regards

Hello,
For Java systems you need to perform a managed system setup, then schedule in solman_ewa_admin.
Regards,
Paul

Infamous "Recovery policy configured for this system contains invalid recovery certificate" message

Hello,
On a Windows 2012 R2 member server of a Windows 2012 domain, I tried encrypting a folder, and I got a "Recovery policy configured for this system contains invalid recovery certificate message." This is the first known attempt
at enabling EFS within our organization.
When I looked at the EFS certificate within the Default domain GPO, it had expired.
Is it as simple as deleting and recreating the EFS certificate within the Default domain GPO? Then running gpupdate /force on the Windows 2012 member server?
Thanks
Ron

You can give a look to that: http://blogs.technet.com/b/askds/archive/2008/01/07/replacing-an-expired-dra-certificate.aspx
More if you ask them here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=migratedforums&filter=alltypes&sort=lastpostdesc
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Can i use technical system type 'third party' for r3 system in idoc2file sc

Hi,
i am doing a sample out bound scenario (idoc 2 file), distributing idoc from sap system to csv file (in same network). in this can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
can any one suggest me,........ Thanks in advance & would be appreciated.
Regards
Rajesh

Hi,
 can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
--- No u can't use this...Ur technical system must be "WebAS ABAP" only. For file system you use 3rd party system. means ur technical system like follows.
sender
R/3 -- WebAs ABAP
Receiver
File - 3 rd pary system
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
Click "Clear SLD cache" repeatly for some time in ID, it will come.
regards,
Ansar.

Can we have a new cleint for PI system ?

Can we have a new client for PI systems , though we hold an exisiting client ( say 001) in all the environments i.e Dev , QA and Prd ?
If so , what are the risks and is it worth the risk ?
Please suggest .

> if we create another client will it be of no use ?
Technically it wont be helpful.

System is not configured for WS Securitylogon

Greetings,
I've created and attempted to begin transport of my first provider service.
I'm having some issues in our QA system
The SE80 objects attached to a transport & transported no problem.
I had to manually add the ICF objects onto a transport but I got 'em there
I had to manually create the Service and Endpoint definition in SOAMANAGER
Unfortunately in our QA system I'm getting the following error in SOAMANAGER.
has anyone else seen this error, and if so, how did you or your BASIS team resolve it?
Error: ICF: Cannot generate ICF information from SOAP information[System is not configured for WS Securitylogon (SAP Note 1319507)]

Hi Doug,
I haven't seen this before but I had a quick look at SAP Note 1319507 & it gives a clear indication of how to fix this with report WSS_SETUP. Did this approach in the note not work?
One more point...I'm not sure which ICF objects you manually added but in general you would just transport the SE80 objects. Once the SE80 objects are QA you would then re-do the SOAMANAGER (service & endpoint) configuration, this would then add the ICF nodes automatically.
Regards, Trevor

Can E51 email key be configured for SMS text inste...

can E51 email key be configured for SMS text instead of email?
Like I just want to be able to press the email key to get to sms messages as I use text a lot but never use email on my phone at all.
Thanks,
Andy.
Solved!
Go to Solution.

hi andy..
yes you can.. and i'm already doing that in my E51
just go to settings --> personalisation then change it
and please let me know
Phones I bought from 1st till now:
3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
If you like my post or it helped you, Give me Kodo

How can delayed delivery update be configured for Inbound delivery ?

Hi All,
How can delayed delivery update be configured for Inbound delivery ?
There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
Regards
Jimmi

Hello Jimmi,
Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
664316 Tips for the delayed delivery update for TO
I hope this information helps!
Martin

Everytime i try to download it says i need to contact system administrator but i am on system administrator but it still does not download

everytime i try to download it says i need to contact system administrator but i am on system administrator but it still does not download

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Can Central System administration be configured for JAVA systems?

Similar Messages

Maybe you are looking for