Can code view wrap be changed

Its a basic question, but...
Can code view wrap be changed?
What I mean is... in code view, if I had a piece of code
which was longer than the width of my screen, can I change settings
to allow it to continue along horizontally instead of dropping down
to the next line automatically.
I know it doesn't affect the layout of the page... this is
purely for personal preference when i'm in code view. This happens
as standard in GoLive and is one of the few things left I'd like to
sort in my moving back to Dreamweaver.
many thanks in advance

In the version of Dreamweaver I have you select the 'View'
drop down menu, then 'Code View Options'. From there you should be
able to turn the word wrap on or off.
I expect it is similar for all versions of Dreamweaver.
Hope this helps.

Similar Messages

Can't view time or change start/end time of clip

Using imovie '09 and have several events that I imported from .mov files. imovie displays the total length of the clip but when I run the cursor over the clip in the browser the little timer window that pops up says "Created:" followed by the date/time that it was originally imported from a camera into .mov format. Every other file that I've imported directly into imovie from a camera gives me the running time of the clip as I run the cursor through the clip. I've tried to adjust the clip's date/time but it won't let me create a start/end time - regardless of what date/time I put in it assigns the same date/time to the start and end of the entire clip and doesn't show any running time so I can't mark/note specific times in the clip that I want to later select. Not sure why this is happening with these specific clips that were imported from existing .mov files - possibly because these clips were originally imported onto a pc and converted into .mov files, then imported into imovie after that? I still have the original tapes so I could import to imovie from scratch but would prefer not have to to do that as this makes up 20 hours of vid. Any solutions?

You might get a better response to your question over in the iLife > iMovie community. This forum is iMovie for iOS so most visitors here are working on a different platform, and while some may know about both products, many won't, me included.
tt2

Text wrapping in code view

In Preferences, I have checked the option Automatic wrapping
after column
76. However some rows can't wrap at the specified column
because the tags in
that rows can't be destributed in two lines. So, DW (8 and
now CS3)
hard-breake them at the end of the window, resulting in a new
line without
line number (I have Line numbers checked under View > Code
view options
menu).
Is there a setting for not breaking those tags at the end of
the window?
(I'm only speaking about the long tags and not the plain
text, that I srtill
want it wrapped at column 76 so, I can't uncheck the Option
Word wrap under
View > Code view options menu, because it overrides the
wrapping after
column 76 option of the Preferences, making not only the long
tags exceeding
window's right edge, but plain text, too).
Thank you in advance
Please, remove hyphens to contact me

Tun off this setting:
View > Code View Options > Word Wrap
HTH,
Randy
> In Preferences, I have checked the option Automatic
wrapping after
> column 76. However some rows can't wrap at the specified
column because
> the tags in that rows can't be destributed in two lines.
So, DW (8 and
> now CS3) hard-breake them at the end of the window,
resulting in a new
> line without line number (I have Line numbers checked
under View > Code
> view options menu).
>
> Is there a setting for not breaking those tags at the
end of the window?
> (I'm only speaking about the long tags and not the plain
text, that I
> srtill want it wrapped at column 76 so, I can't uncheck
the Option Word
> wrap under View > Code view options menu, because it
overrides the
> wrapping after column 76 option of the Preferences,
making not only the
> long tags exceeding window's right edge, but plain text,
too).

Template - Can't edit in code view

Can anyone help? I'm using Dreamweaver 8 and have a very
basic template that contains one editable region. I've been getting
an intermittent problem with trying to make changes to the editlbe
region in code view (on pages created from the template.) I get a
long error message about the fact that I am trying to make changes
in code that is not marked as editable, but it IS in an editable
region. Seems to allow me to make changes in Design View - but some
of what I want to do needs to be done in code view.
I've built virtually identical templates before, and never
had this problem. Please let me know if you can spot the problem.
If I need to include the CSS let me know.

Does the page validate (
http://validator.w3.org)? Code
errors anywhere on
the page (even in the CSS) will cause these error messages to
be thrown.
Also, the proper syntax for comments is not this -

but rather this -

(note the spaces)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"leadhead1" <[email protected]> wrote in
message
news:[email protected]...
> Can anyone help? I'm using Dreamweaver 8 and have a very
basic template
> that
> contains one editable region. I've been getting an
intermittent problem
> with
> trying to make changes to the editlbe region in code
view (on pages
> created
> from the template.) I get a long error message about the
fact that I am
> trying
> to make changes in code that is not marked as editable,
but it IS in an
> editable region. Seems to allow me to make changes in
Design View - but
> some
> of what I want to do needs to be done in code view.
>
> I've built virtually identical templates before, and
never had this
> problem.
> Please let me know if you can spot the problem. If I
need to include the
> CSS
> let me know.
>
>
>
>
> <body>
>
> <div id="wrapper">
> <div id="sub_header">
> <img src="../images/sub_hdr.gif" alt="xxx"
width="330" height="92" />
> <div id="sub_address">
> <p>xxxx<br />
> <a href="xxx">xxx</a></p>
> </div> 
> </div> 
> <div id="tagline">
> <img src="../images/tagline.jpg" alt="xxx"
width="760" height="33" />
> </div> 
> <div id="leftnav">
> <ul>
> <li><a
href="../index.html">HOME</a></li>
> <li><a href="../about.html">ABOUT
US</a></li>
> <li><a
href="../events.html">EVENTS</a></li>
> <li><a
href="../membership.html">MEMBERSHIP</a></li>
> <li><a href="../contact.html">CONTACT
US</a></li>
> </ul>
> </div> 
> <div id="pagetext">
> 
> <h1 class="teal">Page Header here</h1>
> <p>Content here... </p>
> 
> </div>
> 
>
> </div> 
>
> </body>
>

How to change the font in the code view

I want change the font size and style that shows when I'm in
code view.
For the life of me, I can't find where to do this. Can
someone help me?

PREFERENCES | Fonts
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Port Man" <[email protected]> wrote in message
news:elq1d1$6it$[email protected]..
>I want change the font size and style that shows when I'm
in code view.
> For the life of me, I can't find where to do this. Can
someone help me?
>
>
> --
>

Can you disable the color picker in code view?

One of the things that slows me down in Dreamweaver is the color picker in code view. it pops up when I'm trying to type a quick colour - like #fff, and causes a pause in my system for 5 seconds (effectively locking up my system) while it thinks about selecting a color. is there a way I can just stop the color picker from popping up at all? I never use it to pick colors.

There is no way to disable the colour picker in Code view. However, you can successfully prevent it from popping up by changing the delay in Preferences:
Setting the delay affects all code hints, but they pop up as soon as you start typing. However, I found that a delay of about 1 second was sufficient to suppress the colour picker.

Is it possible to change color on the line strip/code view in CS6?

Hello -
I did some research on this and cant seem to see if this can be done - I was hoping to change the color of the blue line menu on the code view screen.
Eric

I take it you're referring to that vertical line in the left hand side of Code View? I don't think it's possible to change the color. If you disable line numbers (#), it's a bit less noticeable.
Nancy O.

Why Is Dreamweaver CS4 Shutting Down When Making Changes In Code View?

Hi,
When in Code View, and trying to make a change to such, Dreamweaver is automatically shutting down. Heck, I can't even press Enter while in Code View without it shutting down.
I had this problem before, and a friend suggested holding down the Shift key while restarting DW. It worked at that time, but that suggestion is not working now.
I've tried restarting the computer, repairing disk permissions, and still having the same problem.
Does anyone have a remedy for this?
Thank you.

Yes, I am on a Mac.
The application Dreamweaver quit unexpectedly.
Don't have any DW extensions.
Deleted the plist files, and still had the same problem.
Found another DW pref file. Deleted that, and it works.

Can't view changed data in journal data

Hi,
I have implemented JKM Oracle 10g Consistent Logminer on Oracle 10g with the following option.
- Asynchronous_mode : yes
- Auto_configuration : yes
1. Change Data Capture -> Add to CDC, 2.Subscriber->subscribe (sunopsis),
3. Start Journal
The journal has been started correctly wothout errors. The journalized table has always the symbol "green clock". All is gook working.
And then i inserted 1 record in source table, but i can't view changed data in journal data. I can't understand why journal data was generated.
There are no errors.
Help me !!!

Did your designer was on the good context ?
Look the list box at the top right of the Designer interface.
You must have the same as the one where you define your journalization.

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I have changed the DNS number to 8.8.8.8, I have worked on this for 2 days and still can't find a fix, HELP!!

I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

How can I view my iCloud contacts from someone else's iPhone? I don't want to change their phone settings.

Yesterday I ran into a problem that was eye opening to say the least. I could not not access my contacts in order to find a friend's phone number. No one remembers phone numbers any more. God knows I don't.
I was on a jetski and it broke down. I was stranded at a dock miles away. I needed to contact my friend to tell him (a) I'm ok, (b) where I was, (c) to bring a tow. Of course I had no phone on me because it would have gotten soaked.
People were kind enough on the dock to let me use their smart phones to attempt to retreive the phone number and call for help. But I quickly discovered that it is impossible.
On an iPhone, I tried to use their Safari browser to go to www.icloud.com. When you do that, it simply redirects you to the apps. But it isn't my phone, and their apps are logged in to the owner's accounts. I wasn't about to update the settings in a stranger's phone.
One guy let me try his iPad with Cellular. Same problem as the iphones. It would not let me use www.icloud.com. It insisted that I use the native iOS apps.
On an Android, www.icloud.com would simply refuse to work. It would say it was not supported.
The question I have is: How can I view my contacts from someone else's smart phone in an emergency situation?
Second question: Why can't I use www.icloud.com on a smart phone's web browser like I can on regular computer?
I got lucky. I happened to know my mom's home number. Many hours later she was home and I was able to use a phone to call her. She brought up www.icloud.com on her home computer, logged on as me, and read me the phone number I was seeking. But what are the chances of being able to call a trusted person who has access to a computer to do this for you?

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

Help! Can't paste into code view or property inspector

I'm experiencing a weird and extremely annoying bug in Dreamweaver CS6 -- I can't paste text from outside apps into DW's code view or into the property inspector (such as URLs).
Pasting doesn't work no matter the method: Ctrl + V, right-clicking or using the Edit menu. Pasting works normally in every other program. If I copy within Dreawmweaver, pasting works fine.
Does anyone have a solution for this? I'm running Win 8 and DW 12.1 through Creative Cloud. Searching the forums, I see others have reported the same issue. Some have been able to fix it by deleting the configuration file; that didn't fix the issue for me. I'd like to try reinstalling DW, but the Adobe Application Manager doesn't seem to allow that.
I began noticing this bug about two weeks ago. That might have been about the same time I updated to 12.1. Can anyone help?
Thanks,
Cory K.

Adding to my last post, I used a clipboard format inspector called nclip (http://code.google.com/p/nclip/) to see if I could find a pattern between "what works" and "what doesn't".
There are two cases where I'm seeing paste-into-Dreamweaver CS6 fail:
Paste into Code View fails, but Paste into Design View works!
Paste into either Code View or Design View fails
I went through the list of programs that worked and didn't worked, using nclip to show what clipboard formats were being saved from each working and non-working source. It appears that DreamWeaver CS6 as of January 9, 2013 doesn't accept the most basic text clipboard formats:
CF_UNICODETEXT
CF_TEXT
CF-OEMTEXT
CF_LOCALE
If these are the only clipboard formats used by an app (for example, Window's venerable Notepad.exe), Dreamweaver doesn't appear to handle them. Most programmer-style text editors output just these formats, because they are presumed to be understood any application that handles text. These fail for both pasting into codeview and design view.
Interestingly, Chrome browser fails the code view test, but it does work in design view! It outputs the four clipboard types above, plus one more:
Custom Format: HTML Format
Hypothesis 1: Any application that puts HTML Format on the clipboard will paste into design view, but not necessarily code view.
Next, Visual Studio 2010 and Sticky Notes, which doesn't include HTML Format as a clip type, works for both code view and design view. They both output this type in addition to the basics:
Custom Format: Rich Text Format
Two programs that output Rich Text Format without HTML Format are Sticky Notes and WordPad. These both work with Code View and Design View. From these limited tests on my system, it appears that for Dreamweaver to accept a text paste from an outside program into Code View, that program must output Rich Text Format to the clipboard. Otherwise, it fails. Dreamweaver will accept HTML Format, but only in Design View. Firefox is an exception in that it don't export Rich Text Format, but still works with Code View. It might use OLE, though (Chrome doesn't seem to use OLE, and it breaks in code view).
Hypothesis 2: Any application that puts Rich Text Format on the clipboard will paste into design view AND code view.
If Dreamweaver is really ignoring the basic text clipboard formats, and it's not just my system configuration, then this is a bug. Probably something that got overlooked in testing.
To reproduce on Dreamweaver 12.1 build 5966:
Try copy/pasting text from Notepad.exe into Dreamweaver Code View (DWCV). This fails for me.
Try copy/pasting text from WordPad.exe into DWCV. This works!
Try copy/pasting text from Internet Explorer 9 or Firefox into DWCV. This works!
Try copy/pasting text from Chrome. This fails to paste into Code View, but does paste into Design View
The Code View workaround:
Use Firefox or Internet Explorer for your browser if you're copy/pasting source code.
If you're working from another text editor, try copy/pasting into intermediate programs Sticky Notes or WordPad, then copy/paste from there into Dreamweaver.
So that is my experience on Windows 7 64-bit. Anyone else experiencing the same thing?

I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
Restart phone
Reset phone
Restore in iTunes using a backup
Restore in iTunes as new, without using a backup
If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

How to change page loading in code view?

We have thousands of pages and whenever we load a page it appears in code view so it is difficult to know which page it is that you need to work on. Is there a preference setting to allow opening a page in Split view? It's easier to know we've selected the correct page visually than that with looking at similar code.
Any tips?
Rick

I must not have been clear. Sorry.
My layout: Design view on top, code view on bottom, file/assets/etc on right. When I select a file to open, it flashes in split view and then goes to code view. Our pages look very similar and just code view can't display the page layout and I always (well, used to) work in split view.
How can I set my preferences to say "open file in split view"?
Thanks for the response, tho!

Can code view wrap be changed

Similar Messages

Maybe you are looking for