Can config.bin be "restored" from a command prompt?

After trying to find ways to configure the router using batch commands, I've realized that configuring the router with port forwarding enabled and backing up the router to config.bin, and then configuring it with port forwarding disabled and backing up the router to config.bin, I now have an ON and OFF. If there is a way to load config.bin to the router via command prompt it would achieve what I'm looking for.
Thanks,
Terry

Sure.
The Messenger project at Jakarta already has Producer and Consumer classes that can be run from the command line to send / receive messages via JMS. So you don't even need to write any code ;-)
http://jakarta.apache.org/commons/messenger.html

Similar Messages

How can i run application client from the command prompt ?

Hi,
I'm new to java & EJB. so can any body tell me the command to run the application client from the command prompt. Here is the code to print hello world:
/* Remote interface */
public interface Hello extends javax.ejb.EJBObject
     public String hello() throws      java.rmi.RemoteException;
/* Home interface */
public interface HelloHome extends javax.ejb.EJBHome
     Hello create() throws java.rmi.RemoteException, javax.ejb.CreateException;
/* Stateless session bean class */
public class HelloBean implements javax.ejb.SessionBean
     private javax.ejb.SessionContext ctx;
     public void ejbCreate(){
          System.out.println("ejbcreate()");
     public void ejbRemove(){
          System.out.println("ejbRemove()");
     public void ejbActivate(){
          System.out.println("ejbActivate()");
     public void ejbPassivate(){
          System.out.println("ejbejbPassivate()");
     public void setSessionContext(javax.ejb.SessionContext ctx){
          this.ctx=ctx;
     public String hello(){
          System.out.println("hello()");
          return "Hello, world!";
/*Client class */
import javax.naming.Context;
import javax.naming.InitialContext;
import java.util.Properties;
public class HelloClient
     public static void main(String[] args) throws Exception{
          Properties props=System.getProperties();
          Context ctx=new InitialContext(props);
          Object obj=ctx.lookup("HelloHome");
          HelloHome home=(HelloHome)javax.rmi.PortableRemoteObject.narrow(obj,HelloHome.class);
          Hello hello=home.create();
          System.out.println(hello.hello());
          hello.remove();
I have stored .java files in c:\ejb
I have successfully created the .class files using javac command in the following directory :
c:\ejb
I have also created Helloworld.ear file in c:\ejb using sun application server which contains the following files:
ejb-jar-ic.jar
app-client-ic.jar
sun-j2ee-ri.project
application.xml
sun-application.xml
Manifest.mf
But the problem is that i'm not able to run the HelloWorld.class file successfully from the command prompt. So please suggest me the comand.
Thanx in advance.
Best regards,
Pankaj

Hi
You can run this code from the command prompt in the same way as you run any other simple java program. The only thing is you need to set the Home and Local interfaces in the classpath.And obviously if u had deployed the bean in ur app server container, then its all over.
And one more thing is that u need to set the provider URL in the InitialContext created in the client program.
Thanks
Arun B

Can't print to LPT1 from a command prompt - WIN XP

I have an HP Deskjet 722C hooked straight up to the computer via a standard parallel printer cable (DB25 to Centronics) to the machine's parallel port. OS is XP Pro on a single user system with no network involved. For example, I load a file in DOS EDIT, go to File, Print, Print to LPT1, and it acts as if it printed but the printer doesn't respond. I can however print straight from any windows app with no problem. No other printer is directed to the LPT port(s). Tried the NET USE command (which I am quite familiar with) to redirect LPT1 to itself, no use. Deleted and let Win XP re-install the printer's driver, no use. Went into the machine's BIOS and tried every combination of EPP, ECP, etc., to no avail. The only logged in user to this machine has administrator rights.
What am I missing?
Thanks !!!!!!!!!!

Can you print from XP? If not maybe the wrong driver is associated with the printer. There may information in this document which could help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bud09005&cc=us&dlc=en&lc=en&product=57565&tmp_tr...
If that doesn't help, are there any error message at all?
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

How can I pass a value to the command prompt?

I was wondering how can I pass a value to the command prompt with Windows and Linux? I'm more interested in Linux's system than Windows though. Is there a way to return info from the command prompt?

Here is a snippet from http://mindprod.com/jglossexec.html that explains how in detail.
Runtime.getRuntime().exec("myprog.exe") will spawn an external process that runs in parallel with the Java execution. In Windows 95/98/ME/NT/2000/XP, you must use an explicit *.exe or *.com extension on the parameter. It is also best to fully qualify those names so that the system executable search path is irrelevant, and so you don't pick up some stray program off the path with the same name.
To run a *.BAT, *.CMD, *.html *.BTM or URL you must invoke the command processor with these as a parameter. These extensions are not first class executables in Windows. They are input data for the command processor. You must also invoke the command processor when you want to use the < > | piping options, Here's how, presuming you are not interested in looking at the output:
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat" );
Runtime.getRuntime( ).exec ("cmd.exe /E:1900 /C MyCmd.cmd" );
Runtime.getRuntime( ).exec ("C:\\4DOS601\\4DOS.COM /E:1900 /C MyBtm.btm" );
Runtime.getRuntime( ).exec ("D:\\4NT301\\4NT.EXE /E:1900 /C MyBtm.btm" );
There are also overloaded forms of exec(),
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat", null);
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat", null, "C:\\SomeDirectory");
The second argument can be a String [], and can be used to set environment variables. In the second case, "C:\\SomeDirectory" specifies a directory for the process to start in. If, for instance, your process saves files to disk, then this form allows you to specify which directory they will be saved in.
Windows and NT will let you feed a URL string to the command processor and it will find a browser, launch the browser, and render the page, e.g.
Runtime.getRuntime( ).exec ("command.com http://mindprod.com/projects.html" );
Another lower level approach that does not require extension associations to be quite as well set up is:
Runtime.getRuntime( ).exec ("rundll32 url.dll,FileProtocolHandler http://mindprod.com/projects.html" );
Note that a URL is not the same thing as a file name. You can point your browser at a local file with something like this: file://localhost/E:/mindprod/jgloss.html or file:///E|/mindprod/jgloss.html.
Composing just the right platform-specific command to launch browser and feed it a URL to display can be frustrating. You can use the BrowserLauncher package to do that for you.
Note that
rundll32.exe url.dll,FileProtocolHandler file:///E|/mindprod/jgloss.html
won't work on the command line because | is reserved as the piping operator, though it will work as an exec parameter passed directly to the rundll32.exe executable.
With explicit extensions and appropriately set up associations in Windows 95/98/ME/NT/2000/XP you can often bypass the command processor and invoke the file directly, even *.bat.
Similarly, for Unix/Linux you must spawn the program that can process the script, e.g. bash. However, you can run scripts directly with exec if you do two things:
Start the script with #!bash or whatever the interpreter's name is.
Mark the script file itself with the executable attribute.
Alternatively start the script interpreter, e.g.
Runtime.getRuntime( ).exec (new String[]{"/bin/sh", "-c", "echo $SHELL"}";

How to execute a scenario from Windows command prompt

Hi,
I have a package which is executing fine from Designer. But the same scenario if I am trying to execute from windows command prompt, then it is giving error.
The package is getting a refresh variable, passing to interface which is creating a file from table, this file is then getting FTP'ed to another server.
I am executing following command -
startscen OB_TAB_TO_FILE_PKG 001 ODICTX "-v=2"
The error is -
A JDK is required to execute Web Services with OracleDI. You are currently using
a JRE.
OracleDI: Starting scenario OB_TAB_TO_FILE_PKG 001 in context ODICTX ...
java.sql.SQLException: socket creation error
at org.hsqldb.jdbc.jdbcUtil.sqlException(jdbcUtil.java:67)
at org.hsqldb.jdbc.jdbcConnection.<init>(jdbcConnection.java:2451)
at org.hsqldb.jdbcDriver.getConnection(jdbcDriver.java:188)
at org.hsqldb.jdbcDriver.connect(jdbcDriver.java:166)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
at com.sunopsis.sql.i.run(i.java)
DwgJv.main: Exit. Return code:-1
Please let me know where I am going anything wrong.
Thanks,
Himanshu

Hi,
you need to make the necessary changes to the %odi%\bin\odiparams.bat config file, under the "Repository Connection Information" section so that startscen knows how to extract metadata from your repository.
You apparently have left the default settings to the Hypersonic demo repository. Is that the technology your repository is hosted on?

Starting a WSAD server from the command prompt and not from the IDE UI

Hi,
is there a way to run the WSAD server from the command prompt instead of using the IDE UI . i have tried starting the server from the Directory i have installed WSAD " D:\Program Files\IBM\WebsphereStudio\runtimes\base_v5\bin>startServer.bat" but it gives the Following error " The system cannot find the path specified." i am working . do i have to specify the workspace that i am currently working on

to see if the network adapter has registered with OPMN run: opmnctl status
the 6200 message is a timeout which can be set in opmn.xml, the reports server(s) and other processes managed by OPMN should still stop.
Try opmnctl stopall or opmnctl shutdown
Does the timeout shows up regularly ie can you repeat it?
After the stopall or shutdown try to start everything up again and try to stop the single reports server process again.

Code for how to read an integer array from the command prompt...

hello,
Could anyone give me the code for how to read an integer array from the command prompt...its very urgent!..

If you are using a recent version of Java (5 or later) you can use Scanner:
http://java.sun.com/javase/6/docs/api/java/util/Scanner.html
That page has some example code on it, too.

Make System.in read input from a command prompt

How can i make System.in read input from a command prompt which is opened after program
is started. Please note that program starts without commad promt. Can u plz help?
sharmila

System.in DOES read from the command shell that you start the app in.
What you don't have is a prompt.
You should know about Java Almanac. There are code samples for simple things like I/O that everyone should know about. There's an example there to help you.
MOD

Setting classpath from the command prompt

each time i try to set the classpath from the command prompt it is not always well done . can someone give a good format
i.e set classpath = ;c:\document and settings\ luke

each time i try to set the classpath from the command
prompt it is not always well done . can someone give
a good format
i.e set classpath = ;c:\document and settings\ lukeThe best way is not doing it at all.
Anyway, try:
set classpath = ".;c:\document and settings\luke"

Error 57 in invoking sqlplus command from DOS command prompt in Oracle Serv

I have a Oracle 11G server which has suddenly shutdown due to power cut-off. Now when I restart the system and trying to connect to database invoking the sqlplus as sysdba from DOS command prompt - I am getting following errors
C:\Documents and Settings\Administrator>sqlplus "/as sysdba"
Error 57 initializing SQL*Plus
Error loading message shared library
Can anyone help me please ?

Yes sure!! .. The details of alert logs for today is herewith -
Thu Feb 28 12:30:02 2013
kewastUnPackStats(): bad magic 1 (0x0DFE82DA, 0)
kewastUnPackStats(): bad magic 1 (0x0DFE82DA, 0)
Thu Feb 28 12:36:02 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:36:19 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_m000_5180.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_m000_5180.trc:
ORA-00204: error in reading (block 1, # blocks 1) of control file
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:36:40 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:37:08 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:37:28 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:37:50 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:38:07 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_m000_6256.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_m000_6256.trc:
ORA-00204: error in reading (block 1, # blocks 1) of control file
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:38:12 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:38:34 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:38:56 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:39:31 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:39:47 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_m001_7628.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:39:49 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_m001_7628.trc:
ORA-00204: error in reading (block 1, # blocks 1) of control file
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:40:10 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:40:31 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_ckpt_3160.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Thu Feb 28 12:40:48 2013
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_m002_2748.trc:
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
Errors in file d:\app\collbrs\diag\rdbms\collbrs\collbrs\trace\collbrs_m002_2748.trc:
ORA-00204: error in reading (block 1, # blocks 1) of control file
ORA-00202: control file: 'D:\APP\COLLBRS\ORADATA\COLLBRS\CONTROL01.CTL'
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.

How to read multiple lines from a command prompt?

I usually read from a command prompt like this:
String answer;
System.out.println("Please enter the required data");
try {
BufferedReader reader = new BufferedReader(new InputStreamReader(System.in));
answer = reader.readLine();
reader = null;
} catch (Exception e) {
System.out.println("There was an exception trying to read " + e);
answer = "";
This has worked fine for years when all I wanted was one line answers.
Now I am trying to prompt for multiple line answers. Is there a way to read into a string array rather than just a string? What class would I use for that?
Thanks a lot!

The easiest approaches would be to read a line at a time until you've read enough lines, whether by a known fixed line count, or a token count, or by reading some sentinel toek, OR read a token at a time using Scanner.next() until you've determined you're done. Which one is more appropriate depends on your situation.

Not running from the Command Prompt.

I have developed a SMTP based mail dispatch software using netbeans and Javamail. It is working fine while running within netbeans. But while runing it from the command prompt after making a build of it from netbeans, it gives error File not found exception for javamail as below.
=================================================
DEBUG: not loading resource: /META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jre1.5.0_07\lib\java
mail.address.map (The system cannot find the file specified)
exception thrown:

JavaMail attempts to load resources from many places. The fact that some
are not found is not necessarily a problem. JavaMail will fall back to
resources included in the mail.jar file.
You need to look further in the debug output for the source of your problem.
(I assume you've included mail.jar in your CLASSPATH when running
your program from the command prompt. See README.txt included
with JavaMail.)

Calling r25con32.exe from the command prompt

how to call r25con32.exe from the run prompt.

Duplicate:
Calling r25con32.exe from the command prompt
:)

I upgraded to ios6 on ipod touch and after I completed a sync on my PC but I suppose it did not sync, because now it will not restore from a back up and wants to restore from another account that I have saved. Can I some how restore from the apps?

I upgraded to ios6.1.3 on ipod touch and after I completed a sync on my PC but I suppose it did not sync, because now it will not restore from a back up and wants to restore from another account that I have saved. Can I some how restore the apps to avoid having to pay for them again and having to recreate settings?

As I said, the backup that iTunes makes does not include apps (and music) if those items where not in the iTunes library on the computer on which you restored they will not be on the iPod.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

CAN THE IPHONE BE RESTORED FROM ANOTHER COMPUTER?

I plugged in my iPhone to my Windows 7 computer through the USB port.
iTunes ran and I proceeded to update the OS. This failed. Not Apples fault.
Rather, it's Microsoft's fault because there's a bug in their last Windows update where it disables USB ports.
The bug is: if I plug a device to a USB port, it's not recognized at all (nothing happens).
If the device was already plugged in when I turned on the computer, the USB port works.
However, if I then unplug that device and plug it back in, it doesn't work.
The USB where my iPhone was plugged in stopped working because I think the iTunes update turns the USB
port on and off.
Since the OS did not get installed, iTunes told me I must restore my iPhone to the factory settings.
That did not work because of the USB port problem. I could not even turn on my iPhone. It was totally non-functional.
I then went to my sons computer and did a restore, but because all of my data is on my computer,
I lost EVERYTHING. Or is it lost? I copied the music\itunes folder from my bad computer to my sons computer,
but when restore ran, it did not recognize this data, instead it recognized my sons iPod data.
My Question is: Is there a way to copy the iPhone data on my stricken computer and transfer that to my sons
computer where I can then do a restore using that data?
Can I just manually copy a folder from the broken computer to the good computer?
Thanks.

Actually, never mind. I was able to get the procedure for using the terminal to format partitions of a specific size, and found out that the EFI partition is automatically generated when partitioning the drive, so I only had to create a 400 MB Recovery partition (although I couldn't get it smaller than 528 MB), a 900 MB OSBoot partition, and the rest as Media. Using Disk Utility, I recovered the downloaded disk image to the OSBoot partition, reconnected the hard drive, plugged in the AppleTV and let her rip.
Flashing question mark gone, although for some reason it initially booted in recovery mode, where I was supposed to be able to restart, run diagnostics, or restore firmware to factory resets. Diagnostics ran fine, but I was not able to restore to factory resets. Nevertheless, when I restarted again, the AppleTV worked fine. I even downloaded a couple of updates, viewed some trailers, etc.
This was fun! Thanks for your help!

Can config.bin be "restored" from a command prompt?

Similar Messages

Maybe you are looking for