Can Flex get faster using BLAZEDS with JBOSS

how can i make the data push faster?
i develop an application on java that reads data from a gps located in a car, and other java receive this data. im actually sending the data to FLEX using BlazeDS and JBoss as application server, but i dont know why it's too slow,
flex receive the data push every 3 seconds or more, and i want to be able to receive as much data as i want!!
my question is, can i make flex faster receiving this data!?
i need to receive the data faster to actually show on real time the position of the car,
thanks

Looks like you guys have blazeds up and running inside JBoss. I'm actually having trouble getting this up and running. Can you provide some info on how you set it up? Here are my configs:
activemq-jms-ds.xml:
      jms/testTopic
      jboss.jca:service=RARDeployment,name='activemq-ra.rar'
      javax.jms.Topic
      PhysicalName=test.topic
messaging_config.xml :
                Topic
                javax.jms.TextMessage
                activemq/TopicConnectionFactory
                jms/testTopic
                NON_PERSISTENT
                DEFAULT_PRIORITY
                "true"
                AUTO_ACKNOWLEDGE
                1
What am I missing? Look forward to hearing from you guys. Thanks in advance.

Similar Messages

Developing flex apps that use blazeds with flexbuilder and eclipse

Hi all,
Im new to Flex. I'm trying to setup my development environment. What I've noticed is that when blazeds is started and I run a flex project, it creates a folder in the blazeds root folder named $ProjectName-debug (replace $ProjectName with the actual project name). Once this folder is created, and the flash page is accessed, it cannot be deleted until blazeds is actually stopped. The files on that folder seem to be locked. While this folder is locked, eclipse cannot seem to re-build the project (specifically clean). Thus every small change I make to the project, I'm currently having to stop blazeds, clean the flex project, start blazeds, run the flex project.What makes things worse is that I have to start our application along with blazeds so it can retrieve the data from the app (which takes a few minutes).
I'm wondering if other people are having to go through this pain or if they've figured out a way to get around this. I would ideally like to have a way where I'm able to rebuild the project and hit f5 and reload the page and see the changes. I understand this is not possible with debug.
If anyone has figured out a way to incorporate blazeds to their development environment in a more practical way, please let me know. We just switched from tapestry/gwt to flex. We used to be able to update on the go thus development was much simpler.
Regards,
Udam

Hi Udam. I don't seem to have that problem. I'm using the FlashBuilder 4 (formerly FlexBuilder) beta so maybe it is a bug in the version of FlexBuilder you are using, although it could also be something else in your environment.
When I clean the project in FlashBuilder 4 it deletes all the assets from the $ProjectName-debug directory and then rebuilds the project. It doesn't attempt to delete the $ProjectName-debug directory itself.
If you are not using the FlashBuilder 4 beta I would try using that and see if it resolves the problem for you. If that fixes things then you know it is an issue with the version of FlexBuilder you are using.
If that doesn't do it, it could be an issue with the application server you are using or maybe something else in your environment.
If you still have problems after trying this with FlashBuilder 4 please reply back with as much information about your environment as you can such as what application server you are using, what OS you have, what browser you are testing with, if you have FlexBuilder and BlazeDS running on the same machine or separate machines, etc.
Thanks.
-Alex

I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?

I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?

We didn't do that video. Why are you asking here?
Those videos are usually outdated....
Use the current tools etc., in the iOS Dev Center and iTunes/iTunes U ~ Stanford.

My lil bro locked my ipod.. he doesnt know the combination he used though.. how can i unlock the ipod if i can't get it to unlock with itunes because its not registered in my cp?

my lil bro locked my ipod.. he doesnt know the combination he used though.. how can i unlock the ipod if i can't get it to unlock with itunes because its not registered in my cp?

Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.

I just updated to ios7 and my phone wants me to connect to iTunes before I can do anything. My computer is broken and I'm borrowing someone else's. Will it try to sync with their computer? Can I get around using iTunes somehow?

I just updated my iPhone 4S to iOS7 and it wants me to connect to iTunes before I can do anything. But my computer is broken and I'm borrowing someone else's. Will it try to sync with their computer? Can I get around using iTunes somehow? I'm new to this; any help would be appreciated!

If the device is indicating to connect to iTunes, then it is in recovery mode. You will need the computer and iTunes to recover it. You can fix the iTunes to not sync to your device, but just let it recover the phone. I hope you would have a backup of your data in iCloud, since it is no longer available to you on the phone.

Problem in Blazeds with Jboss Clustering ( Mod_JK with SSL )

Hi,
     We are running our flex application in jboss clustering environment with the help of Apache mod_jk(Apache Web server as front end with mod_ssl enabled). We are using the SecureAMFChannel as we deploy the application in SSL. We use the RemoteObject for communicating with Java.
The Application is running fine when we have only one node of JBoss. But once we add one more node to the cluster the application throws the following exception .
Duplicate HTTP-based FlexSession error: A request for FlexClient 'FDCA49A7-9317-4D8A-881F-9248B1136E7A' arrived over a new FlexSession 'C9C563B8266A03C2207C00796CD7DFF1', but FlexClient is already associated with FlexSession '8A328320F5C530D55E94568996A1B552', therefore it cannot be associated with the new session.
As I am maintaing the session in the server, I need to use the JBoss cluster for session replication. I heard that flex clustering is not needed as we have mod_jk and it will do all the stuff for us.
I checked with simple application without any session data also then too I faced the same problem.
After the very first login, I can see 2 session created simultaneously and destroyed. I checked the application whether it calls twice before the session is created, but it is calling only once.
Also when application connects with server2 and if I down the server2 my flex application throws the error that the server is not found, It is not detecting the other server.But it works once I refresh the browser.
Application Environment Details
JBoss 6
Blaze Ds 4.5
Apache Web server 2.2.21
Mod_JK   1.2.32
Mod_SSL 2.8.31
Thanks,
Suresh T
I enabled the sticky session in Mod_jk .
It is working when the connection is not secure(http) in both apache web server and jboss web server ). But when the connection is https the above problem is happening .
Message was edited by: suresh.thirumurugan

Hi,
Thanks for your info.
It worked for me as well.
Thanks,
Prasad
On 6/26/08,
Matthieu Labour <
[email protected]> wrote:
A new message was posted by Matthieu Labour in
Configuration and Getting Started Discussion --
  Problem with configuring BlazeDS with JBOSS
You might want to download the following tutorial
http://sebastien-arbogast.com/2008/04/10/flex-spring-and-blazeds-the-full-stack/
it works on jboss
Best
Matt
View/reply at
Problem with configuring BlazeDS with JBOSS
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription.

HT204382 I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?

I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?

A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan

How do you use Struts with Jboss Portal

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

I rec'd an iPod Nano and can't get it to sync with playlist. I also have Windows 8. I need help!

I have rec'd an iPod Nano and can't get it to sync with my existing playlist. I am using a Windows 8 Dell laptop. Any suggestions?

One iCloud account has one user name (a .mac or .me email name) and password. If you have set up multiple accounts in the past then you must choose one and stay with it. If you don't know the user name, then you have a problem. If you haven't really begun using iCloud (but you mention trying to get mail, so I'm assuming you have used iCloud before), then use a .mac or .me account you know you have or just sign up for a new account - and be sure to write down the name and password for future use.
If you want to use the account to sync your contacts, email, calendars, etc, then each of your ios devices need to use the same account, otherwise they will be independent of one another.

HT204387 I have an iPhone 3GS and I can't get it to pair with my iPad 3rd Gen neither will discover the other any suggestions

I have an iPhone 3GS and I can't get it to pair with my iPad 3rd Gen neither will discover the other any suggestions

An iPad and iPhone cannot connect via Bluetooth unless you are trying to use a Personal Hotspot feature on your iPhone or have one of the few third-party apps that allow limited file transfer or device-to-device gaming. Unless you're attempting one of these, then any previous "pairing" was probably illusory. If you are trying to use such a thing, tell us which one and someone may be able to provide suggestions.
Regards.

Bought print central app have an impact Lexmark s300 series wireless printer can't get it to work with my I pad , help

I bought the print central app have a Lexmark s300 wireless printer can't get it to work with my I pad any suggestions

To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
Hope this helps.

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

HT1937 How can I get to use my phone? Much of it appears to be set up but when I try and make a call it tells me I have not been given access to this service

How can I get to use my phone? When I try and dial out it says: 'You have not been given access to this service'

Have you chacked with your carrier. The message you are getting seems to relate to a carrier issue and not something to do with the phone itself

Can Flex get faster using BLAZEDS with JBOSS

Similar Messages

Maybe you are looking for