Can generic function module extractions possible with CRM data sources.

Hi Friends,
can generic function module extractions possible with CRM data sources.
90% extractions are generic function module extractions.
How is it possible without BW adapters..
It's very urgent ...Please.
Thanks,
Basava Raju

Hi Madhu,
Just curious ... if you already have a generic FM extractor then just go into it and find out where it is reading the data from. If its reading data from the CRM system then thre is no need for any BW adapter ... just in case you need any ABAP help ... post here ... I may be of use to you.
Best regards,
Kazmi

Similar Messages

RSS feed generation with CRM data

Hi folks,
I got a question from my customer if RSS feed generation is possible with CRM data.
He thinks about a scenario where for example an Intranet user can subscribe a RSS feed that provides information if certain CRM data changed, eg. a new BusinessPartner was created or a certain relationship to a BusiessPartner changed.
Do you know if SAP (CRM) provides such RSS functionality (out-of-the-box)?
Thanks a lot in advance.
Regards,
Bjoern

In CRM 7, every user can customize his own RSS feed.
You can find the settings in the WEBUI under personalize -> Feed
You can also find some additional customizing in the SPRO under
->Customer Relationship Management
->UI Framework
->UI Framework Definition
->Feeds
kind regards,

Function Module in a Generic Function Module Extractor

I want to use a generic function module (ZFM_CONNECTION_DETAIL) in a Generic Function Module based Extractor.
After Creating, I have checked it in RSA3... Data is showing properly on the Extractor Check.
And replicated on BW side, after triggering the extractor using infopackageu2026 only one record is coming on the target side (BW).
And one job is running endless on the source system.
Generic extractor on the normal code is working properly on both sides.
But problem occurs while I was using Function Module in the Generic function Module extractor.
Waiting for a Reply with solution...........
Hi Siegfried Szameitat,
I have searched a lot to find out the solution of my Question (Problem). But there is no solution for the problem I have.
Please let me to find out a proper solution of my issue....
Thanks

FUNCTION zcrm_questionnaire.
Its a full Load...
Codes are as followed..........
DATA:lv_times     TYPE i.
DATA:lv_datapakid TYPE numc4.
CLEAR:lv_datapakid,lv_times .
STATICS: s_s_if TYPE srsc_s_if_simple,
           sd_no_more_data TYPE flag.
DATA: l_s_select TYPE srsc_s_select.
DATA : s_counter_datapakid LIKE sy-tabix,
          s_cursor TYPE cursor.
RANGES : date FOR zresult_lt-date.
DATA: lv_count TYPE i VALUE 1.
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check InfoSource validity
    CASE i_dsource.
      WHEN 'ZCRM_QUESTIONNAIRE'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE e009(r3). ENDIF.
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  i_dsource            "message variable 1
                  ' '.                 "message variable 2
        RAISE error_passed_to_mess_handler.
    ENDCASE.
    APPEND LINES OF i_t_select TO s_s_if-t_select.
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource   = i_dsource.
    s_s_if-maxsize   = i_maxsize.
    APPEND LINES OF i_t_fields TO s_s_if-t_fields.
ELSE.                 "Initialization mode or data extraction
    IF NOT sd_no_more_data IS INITIAL.
      RAISE no_more_data.
    ENDIF.
    LOOP AT s_s_if-t_select INTO l_s_select .
      MOVE-CORRESPONDING l_s_select TO date.
    ENDLOOP.
    DATA : v_questionire TYPE crm_svy_db_sid.
    DATA : itab_questionire TYPE zsurveyid.
    DATA : e_tt_data_get TYPE zresult_lt OCCURS 10.
    v_questionire = 'CALL CENTER'.
    APPEND v_questionire TO itab_questionire.
    v_questionire = 'METER INSTALLATION TEAM'.
    APPEND v_questionire TO itab_questionire.
    v_questionire = 'METER READING & BILLING'.
    APPEND v_questionire TO itab_questionire.
    v_questionire = 'NO SUPPLY'.
    APPEND v_questionire TO itab_questionire.
    v_questionire = 'CASH COLLECTION CENTER'.
    APPEND v_questionire TO itab_questionire.
    v_questionire = 'STREET LIGHT'.
    APPEND v_questionire TO itab_questionire.
    v_questionire = 'CONSUMER CARE CENTER'.
    APPEND v_questionire TO itab_questionire.
    v_questionire = 'WEBSITE'.
    APPEND v_questionire TO itab_questionire.
    DATA : counter TYPE i,
          high LIKE sy-datum,
           low LIKE sy-datum.
    CONCATENATE
    l_s_select-high+6(4)
    l_s_select-high+3(2)
    l_s_select-high+0(2)
    INTO
    high.
    CONCATENATE
    l_s_select-low+6(4)
    l_s_select-low+3(2)
    l_s_select-low+0(2)
    INTO
    low.
    BREAK-POINT.
   do i_maxsize times.
    CALL FUNCTION 'ZCRM_SURVEY_REPORTING'
      EXPORTING
        e_date_frm    = low
        e_date_to     = high
        e_questionire = itab_questionire
      CHANGING
        it_result     = e_tt_data_get.
    IF sy-subrc IS INITIAL.
      e_t_data[] = e_tt_data_get[].
      APPEND e_t_data.
    ELSE.
      EXIT.
    ENDIF.
     sd_no_more_data = 'X'.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
lk

Can a function module call another function module

Can a function module call another function module:-
within the same function group
(ii) within different function groups

Hi,
We can call function from another function. If there is a function which is like a calculator and all the operations are from different functions then we have to call the functions from the calculator function for different functions.
If all the function are from same function group, Then the data is globally available to all the functions with in the group.
Otherwise we have to declare the data definitions for each of the functions if they are in different function groups.
Yes it is possible to call a function module from another function module:-
within the same function group
(ii) within different function groups
Reward.

Clarification on some reading: Datasource and Function Module extraction

Hi,
I found a link on Help.sap which explains how to create a function module and I have some questions after my review:
It basically uses function module to read some filght data from the table SPFLI
1.
I got into this research since one of the methods for data extraction from R3/ECC to BW is through Function Modules.
Why couldn't that extraction be based on a view of the table SPFLI.
i.e. why is this complication of writing an ABAP code to achieve something which could be done with a DB view or table?
2.
Any example or scenario where you think a datasource could NOT be created based on a table, Database View or Sap Query and that it must be done with a Function Module?
3.
So, once the function module is successfully created; how to do create a Datasource based on this function modeule to take care of the delta's on the source data?
4.
There was a discussion about "remote function call" which I did not get completely. Will extracting data from R3/ECC to BI be regarded as "remote call"
Thanks

1. Why couldn't that extraction be based on a view of the table SPFLI. i.e. why is this complication of writing an ABAP code to achieve something which could be done with a DB view or table?
A DataSource could have been created directly from table SPFLI. It was used as an example in the case of the document is my guess. There are some table types, however, that you cannot create a DataSource directly off of.
2. Any example or scenario where you think a datasource could NOT be created based on a table, Database View or Sap Query and that it must be done with a Function Module?
Pool/Cluster tables cannot be directly read and therefore must use a Function Module for extraction. Another reason for using a Function Module, even against a single table, is in the case that you have more than one field that you want to create a generic delta against. SAP delivers the capability in the application to set a generic delta on only one field within the DataSource. If there is more than one, say created on and changed on dates, a Function Module is require in order to enable that.
3. So, once the function module is successfully created; how to do create a Datasource based on this function modeule to take care of the delta's on the source data?
Go to tocde RSO2, enter the DataSource name, click on the Create button. In the next screen, there are three buttons toward the top to tell what is the source of the DataSource: 1) Extraction from View (default); 2) Extraction from Query; and 3) Extraction from Function Module. When you click on the Extraction from Function Module button, the View/Table field will gray out and the Function Module and Extraction Structure fields will un-gray.
4. There was a discussion about "remote function call" which I did not get completely. Will extracting data from R3/ECC to BI be regarded as "remote call"
I think that this is referring to a process whereby you create a remote-enabled Function Module on the source R3/ECC system and then create an ABAP program in BW that calls that remote-enabled Function Module. Basically, the ABAP program on BW would send some parameters through to the remote-enabled Function Module on R3/ECC. The Function Module would extract data into an internal table and then pass that internal table back through to the ABAP program in BW for further processing.
Edited by: Dennis Scoville on Aug 20, 2009 8:18 AM

Generic function module for input two Infocubes and output one infocube-APO

Hi All,
My requirement is we have to pick data from two infocubes(Billing and Backlog) and send to One info cube.
can you please send me an;y generic function module is available in APO or explain me how to solve my requirement.
waiting for your response.
Thanks for Advance.
Shubhojit.

Hi,
I recommend using a multi-cube also but if you insist in JOINing two cubes then you can do that in an ABAP SELECT statement. You need to join the fact table and the dimension tables for all dimensions (for all InfoCubes). Please only retrieve data whose OBJVERS="A".
Please post again if you need more help.
Regards,
Emmanuel

Function module for getting periods for date range

Hi,
Can anybody tell me the function module which will return the periods along with the year, when we give a date range.
e.g
01011999 to 120112000
so it shoud return peroids between these date with year. Its possible thru programatically, but i m checking if there is any FM, so i can use FM.
Thanks,

Hi,
You can use function module which works exactly what you are expecting FIMA_DAYS_AND_MONTHS_AND_YEARS.
please reward points to useful answers.
Thanks,
Sriram Ponna.

Function Module/Document to change Reversal date for FI document.

Can anyone please provide me with the Function Module/Document to change Reversal date for FI document.

Hi Vikram,
Normally, you post a reversing document in the same period you posted the original document. The period of the original document must be open to post a reversing document. If the period is not open, you can overwrite the posting date field with a date in an open period, such as the current period.
Regards,
Manoj.

Function Module to change the master data attachments?

Dear Experts,
In SAP we can enclose the attachments for the Master data. Do we have any standard function module to change the Master data attachments.
Let me know if any?
Thanks and regards,
Reddy

Hi Reddy,
Please make use of function module :
BINARY_RELATION_CREATE_COMMIT
For detailed information on how to use the FM please see the thread below:
USE OF THIS fUNCTION MODULE
Regards,
Dilek A.

How to make this function module as RFC to get data from different system?

Hi
I am trying to use following function module . This function module is used to copy data from one cube to another cube within same system however I need a this should happen across two different system. How can I use this function module to make it remote call to different system and do the same function what it is doing ?
Name of function module -
RSDRT_INFOCUBE_DATA_COPY
Any help would be really helpful
AG

HI,
let us say you want to copy the data of a cube in system A to a cube in system B .
1) create a RFC function module in system B (in this function module call the function module RSDRI_CUBE_WRITE_PACKAGE to update the data), this RFC function module should have same parametersa as RSDRI_CUBE_WRITE_PACKAGE .
2) write a program in system A .. read the data from the infocube using the function module RSDRI_INFOPROV_READ and call the RFC function module in system B that you have created..
for the details of the parameters to pass to these two function modules use the RSDRT_INFOCUBE_DATA_COPY and get the required code
Thanks
mahesh

Function Module to read EDIDC table data.

Dear All,
I am retrieving data from EDIDC table depending upon the creation date and message type. But it is consuming a lot time and hence while going for more than one month data , it gives run time error.
I found while going through debugger that maximum time is consumed by the SELECT query in retrieving the EDIDC data.
Is there any Function Module for retrieving EDIDC table data.
If so kindly let me know.

How can a fm replace this performance issue ? You have only two fields to be passed such as creation date and message type.
For the table EDIDC there is a secondary index 3 for message type. Did you use that ? What is your query written ?
If you look into the standard report RSEIDOC2, the field for creation date used is UPDDAT. It implies usage of secondary index 2
Refer line no 114
Regards
Kesav

Function module to create Inspection setup data

Hi all,
Please tell me a function module to create inspection setup data(The tab found in MM01).
Thank you.

HI Sanu,
Check with
QIBP_INSPPOINT_CREATEFROMDATA
QPLEXT_INSPECTION_LOT_CREATE
QPLEXT_INSP_CREATE_REQ_CONF
for more info search wiht QINSPCREATE* in the SE37.
hope it helps you.
Thanks!

Function Module for getting the desired date

Hi All,
I need a function module where in get the date value from Current date - 540 days.
i,e System Date - 540 days = ????
Thanks
Suresh

previous FM works good , this is for ur info , to give in month, date and year instead of onlly days
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
    EXPORTING
      date      = sy-datum
      months    = '00'
      days      = '07'
      years     = '00'
      signum    = '-'
    IMPORTING
      calc_date = w_due_date.
Message was edited by: chandrasekhar jagarlamudi
Message was edited by: chandrasekhar jagarlamudi

Non-cumulative initialization is not possible with historical data

Hi all,
While loading inventory cube.. 0IC_C03 .. after loading 2LIS_03_BX request get sucessful. while compress that request No Marker update. i getting following error msg.
<b>Non-cumulative initialization is not possible with historical data</b>
Regards
siva.

You sure you didn't use BF instead of BX? This messge indicates that you have historical data in your cube whereas BX only loads a fixed state at a specific point in time... Or maybe, did you initialize BX twice in R/3 without deleting the previous init, I don't know if that could cause that error but it's another possibility.

Functional module for Getting Material classification data.

Please tell me Functional module for Getting Material classification data like class type , class, characteristics and characteristics values for material.

Dear,
FM:
CLAF_CLASSIFICATION_OF_OBJECTS
Table KLAH Class Header Data
- KSML Characteristics of a Class
Regards,
R.Brahmankar

Can generic function module extractions possible with CRM data sources.

Similar Messages

Maybe you are looking for