Can GZIP compression be used when sending mail via EAS?
I don't see a specific reference to this in the docs; thanks!
Hi Josh i am getting the same error as krishna kumar. Below is my request
<?xml version="1.0" encoding="utf-8" ?>
<SendMail xmlns="ComposeMail">
<ClientId>61103135</ClientId>
<SaveInSentItems />
<Mime>BASE64_STRING_OF_MIME_DATA</Mime>
</SendMail>
Mime Data :
From: [email protected] To:
[email protected] Subject: hello MIME-Version: 1.0 Content-Type:text/plain; charset=\"iso-8859-1\" Content-Transfer-Encoding:7bit X-MimeOLE:Produced By Microsoft MimeOLE V6.00.2900.3350 This is the email body content.
Response :
<SendMail xmlns="ComposeMail">
<Status xmlns="ComposeMail">102</Status>
</SendMail>
Response Header:
"Cache-Control" = private;
"Content-Encoding" = gzip;
"Content-Length" = 142;
"Content-Type" = "application/vnd.ms-sync.wbxml";
Date = "Tue, 10 Feb 2015 12:26:26 GMT";
"MS-Server-ActiveSync" = "15.1";
Server = "Microsoft-IIS/8.0";
Vary = "Accept-Encoding";
"X-AspNet-Version" = "4.0.30319";
"X-BEServer" = BY2PR06MB903;
"X-BackEndHttpStatus" = 200;
"X-CalculatedBETarget" = "BY2PR06MB903.namprd06.prod.outlook.com";
"X-DiagInfo" = BY2PR06MB903;
"X-FEServer" = HKXPR06CA004;
"X-MS-BackOffDuration" = "L/-470";
"X-Powered-By" = "ASP.NET";
"request-id" = "176a5d57-f5a5-433c-b929-f967b13566a2";
Similar Messages
-
Alias address from iCloud alias address cannot be used to send mails via iPad
Alias address from iCloud alias address cannot be used to send mails via iPad
If you still have this concern: You can only use the alias address linked to the main iCloud account that you backup your iPad to. You can check that going to Setting-iCloud and check the Account email address.
I think this restriction is rather rediculous. I don't see why we can't configure an alias from a different iCloud account the same way we do for a Gmail account. I hope Apple fixes this in iOS 6. -
Surname not recognized when sending mail via FM
Hi SDN,
I am on WAS 6.20. SRM System.
I have a BSP, which sends mail via FM SO_NEW_DOCUMENT_ATT_SEND_API1.
when putting a normal dialog user in the ICF Service of the BSP I get a mail in my email client, which shows as sender the forename, surname of the corresponding SU01 SAP User. When putting service user in the ICF service the sender, which shows up in my email-client is always 'www' even though I changed fore- and surname of this service user. Why is that?
regards, matthias
Message was edited by: Matthias Kasig
Message was edited by: Matthias KasigI am with you. I think they still have a dud server in their farm and when you get it you get the error message. How to get to level two support is the trick I think.
-
Create Hyperlink when sending mail via Outlook
Hi all,
I want to mail a hyperlink from within function module via outlook. Creating the hyperlink and starting function <new mail> in outlook works just fine. But when the document (word, pdf, etc.) contains blanks, the hyperlink gets interrupted.
For example:
h:\temp\word1.doc (this will work just fine).
h:\temp\word 1.doc (error when displaying hyperlink in body of new mail).
I know that sometimes on the internet blanks are displayed as %20. But how to insert this in an ABAP statement using CONCATENATE?
Best regards,
Micky.Hi Micky,
Try using replace command... to replace SPACE with %20
Regards,
Raj
See the example below:
REPLACE
Basic form
REPLACE f WITH g INTO h.
Addition
... LENGTH len (length specification for field f )
Effect
Replaces the first occurrence of the contents of field f in field h with the contents of field g . All fields are handled in their defined length; this means that closing blanks are not ignored.
The return code value indicates whether the string f was found in h and replaced by g :
SY-SUBRC = 0 String replaced.
SY_SUBRC = 4 String not replaced.
Example
DATA FIELD(10).
MOVE 'ABCB' TO FIELD.
REPLACE 'B' WITH 'string' INTO FIELD.
returns:
FIELD = 'AstringCB', SY-SUBRC = 0 -
Configuring mail priority when sending mails via SMTP from ECC 6.0 system
hi all,
we have the problem, that mails which we send via SMTP out of ECC 6.0 system
reach our SMTP server with very low priority. So the server usualy send them in the evening.
Is there a possibility to configure global priority for mails?
best regards
DavorGoto SCOT transaction, double click on STMP you will find the option
Maximum waiting time for repeat send attempt procedure:
Hours/minutes / 30. define the time over there.
II option execute the job- start send process,
Regards,
Mahesh -
When a external application tries to send an email via Thunderbird i get an error message, roughly translated it says: "Something went wrong with PostMail, error number 2"
My collegues have the same setup, they have no problem what so ever when sending mail via this way. Any tips would be most welcome. Thanks for your time.Continue at your other thread.
https://support.mozilla.org/en-US/questions/1053959 -
I have two mail accounts on my Mac. I want one account to bcc me when I send emails from that account. I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail. Can I set this to only bcc myself from one specific email account? Thanks.
It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
My ssh is in /usr/bin/ssh
I'm not very good at X11 issues, so I'm just throwing ideas out there.
Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
$HOME/.Xauthority
$HOME/.Xdefaults-<hostname>
$HOME/.Xresources
$HOME/.ICEauthority
$HOME/.keymap.km
The above are a few names I found looking through "man X"
While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
Have you tried trashing your
$HOME/Library/Preferences/org.x.X11.plist
file, to see if that is affecting the broken account?
Again, I am just throwing out ideas to see if anything sticks. -
I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion and on both my MacPro and my wife's Imac. I also see my mailboxes randomly disconnecting and reconnecting. Any other ideas of a possible cause?
I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B. -
After updating to Mavericks MAIL no longer issues a "whoosh" sound when sending mail. Can I get it back?
If restarting did not resolve the issue, open Mail Preferences and make sure the box next to "Play sounds for other mail actions" is checked.
-
Problem when sending mails with excel attached
Hi
I'm tryin to send mails via SAPOffice with attached excel documents. I'm using FM SO_NEW_DOCUMENT_ATT_SEND_API1. I have a problem with the code. Here I post it:
DATA: ti_objbin LIKE solisti1 OCCURS 150 WITH HEADER LINE,
ti_objhex LIKE solix OCCURS 150 WITH HEADER LINE.
DATA: BEGIN OF i_excel,
sobid(8) TYPE c,
tab1 TYPE X VALUE 09, "tab code
name(80) TYPE c,
tab2 TYPE X VALUE 09, "tab code
city(40) TYPE c,
tab3 TYPE X VALUE 09, "tab code
kostl(10) TYPE c,
tab4 TYPE X VALUE 09, "tab code
ktext(20) TYPE c,
tab5 TYPE X VALUE 09, "tab code
fasig(10) TYPE c,
tab6 TYPE X VALUE 09, "tab code
ruta(255) TYPE c,
fin TYPE X VALUE 13, "carriage return
END OF i_excel.
i_excel-sobid = wa_datos-sobid.
i_excel-name = wa_datos-name.
i_excel-city = wa_datos-city.
i_excel-kostl = wa_datos-kostl.
i_excel-ktext = wa_datos-ktext.
i_excel-fasig = wa_datos-fasig.
i_excel-ruta = wa_datos-ruta.
WRITE i_excel TO ti_objbin-line.
APPEND ti_objbin.
CLEAR ti_objbin.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
TABLES
packing_list = ti_objpack
object_header = ti_objhead
contents_bin = ti_objbin
contents_txt = ti_objtxt
* contents_hex = ti_objhex
receivers = ti_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
I have used this code before, in 4.6C release and it works fine, but now I'm on ECC5.0 and when i check the code, the next error message is generated: ""I_EXCEL" cannot be converted to a character-type field." If i try using MOVE i_excel TO i_objbin-line instead of WRITE, the error message changes to: ""TI_OBJBIN-LINE" and "I_EXCEL" are not mutually convertible in a Unicode program. program.". I have tried using ti_objhex table instead of ti_objbin in order to use 'context_hex' parameter (instead of 'context_bin') on FM, but i get the same result.
I've been searching any other FM to do this, and i've found more FM of SOI1 function group but i didn´t get the expected result. So i need to send the message with the excel attached, using this FM or any other, but I need some help. Anyone can help me?
Thanks and Regardshi this is a simple example to send the excel sheet as a mail
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver .
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
data: ld_store(50) type c. "Leading zeros
CONSTANTS: con_cret(5) TYPE c VALUE '0D', "OK for non Unicode
con_tab(5) TYPE c VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
*Modification to retain leading zeros
inserts code for excell REPLACE command into ld_store
=REPLACE("00100",1,5,"00100")
concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
wa_charekpo-ebelp '")' into ld_store .
concatenate ld_store into .xls file instead of actual value(ebelp)
CONCATENATE wa_charekpo-ebeln ld_store wa_charekpo-aedat wa_charekpo-matnr INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
regards,
venkat. -
"smtp error" in webmail when sending mails
Hello,
"smtp error" in webmail when sending mails
why?With the very little data offered, I can only give a general idea.
"smtp error" usually means that webmail isn't pointed to a smtp server for sending out mails.
Webmail normally (by default) points to the same box it's on for sending mails out. You can change the host and port with configutil.
Some versions of webmail must point to iMS, and other mail servers won't work. Since I have no idea what version you have, I can't tell if this is a problem.
Did it ever work?
What version are you using? -
Out of office message when sending mail to Lotus Notes from SAP
Hi,
Is it possible to have an 'out of office' message when sending mail to Lotus Notes from SAP?
I'm sending account statements by mail via a modified version of function FI_OPT_ARCHIVE_CORRESPONDENCE. The SAP username is send as a parameter, and later converted to the e-mail saved in the user profile. This works, - but I would like to have an out of office reply if the user I send to is out of office.
Hope someone can help...
Regards,
LeneAs Thomas pointed out, you can use regular SMTP mail to send the contents to Lotus Notes. You can use the function module SO_OBJECT_SEND or any of the SAP Office function modules to do this.
Only thing to remember is that the SMTP may have been disabled by your basis team due to security risks involved. An alternative could be a lotus notes connector available from IBM.
Srinivas -
Spinning wheel not showing when sending mail
Hello,
I recently gave my older iMac G5/2GHz to my Mom and got her all set up - I transferred all of her documents and photos from her old original iMac G3/350 to the "new" iMac G5/2GHz. The iMac G5/2GHz has a very clean and up-to-date Mac OS X 10.4.11 on it. I used the iMac G5/2GHz right up until I got my new iMac 3.06 GHz Intel Core 2 Duo a few weeks ago.
I deleted all the prefs files and related files and folders from Mail 2.1.3 and started off with a "fresh" copy of Mail 2.1.3. I then imported all her e-mail messages, folders and addresses from her old version of Outlook Express 5.0.6. I had a few problems with the import but I got it all straightened around (she had a few mail folders named with either a colon ":" or a slash "/" in them so I got that straightened out and everything worked fine afterward).
But there's a strange problem happening with Mail 2.1.3 when she sends e-mails now. I am used to seeing the little "spinning wheel" to the right of the "Sent" mailbox when sending an e-mail to someone and the word "Sent" actually always seemed to change to "Sending" while mail was being sent but it doesn't do that anymore. The only way we can tell what's happening when sending e-mail is to open the Activity window from Mail's "Window" menu.
Has anyone else encountered this problem and is there any way you may know of to fix it so that we can see the "progress" (the "spinning wheel") of the mail being sent to the right of the "Sent" mailbox (without having to use the "Activity" window)?
All of her messages send and receive no problem but I can't, for the life of me, figure out why we can't see the progress of mail being sent out (we can see the progress spinning to the right of the Inbox when checking mail but nothing shows up when sending mail).
Thanks in advance for your help.
GerardHi Gerard,
Yes it can, first I'd try this...
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
(Deleting may or may not require you to setup your account(s) again.)
Quit Mail, then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
First, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these +folder & file+ to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot. -
Textarea problem when sending mail (only Firefox)
When sending mail using textarea item with multiple lines, carriage returns are taken away in resulting mail when sent in Firefox, but not in IE.
To send mail, I call Javascript function that gets textarea value ($v or $x.innerHTML give the same result) and calls then on-demand process that calls in turn APEX_MAIL function.
IgorThank you, Jari!
"pre" did the trick. Line breaks are OK now.
There is one small inconvenience, though: font becomes Courrier instead of sans-serif type. But this is less disturbing than missing line breaks.
Igor -
MacBooks can't resolve printer name when sending job to windows 2008 R2 print server.
So I am work at company in a windows server 2008 r2 and we have a windows 2008 r2 printer server. Our macbook pros are not on the domain so every time we print to the server we have to type in our credentials.
MacBooks can't resolve printer name when sending job to windows 2008 R2 print server while on wifi but works when hard wired. Any thoughts? The error message I receive is "invalid printer name". I've tried adding the printer through the advanced tab in the print and scan tab of system preferences. I add it buy smb://servername/printername.
When I tried to print on the wifi at my office I get "invalid printer name" in the print job status que.
We can just do direct printing but I would like to know if anyone has had this issue before and if you could point me in the right direction. Thanks!I assume you aare using exchange when configuring the email notifications? What I would do is just use a normal IMAP & SMTP account such as Outlook.com or if you use a POP connector for exchange, one of those accounts' SMTP settings.
For example, I have a POP connector installed and my emails are hosted at 1and1. What I would do here is put my 1and1 SMTP settings in and use these, instead of using Exchange.
Let me know if this is possible.
Ed
Maybe you are looking for
-
My OD is down because the CA athority can't be found. I'm running 10.8.5 with Server 2.2.x OD won't start anymore. I replaced the Certificate with a new valid one. But i can't assign the Cert to OD again. How te resolve this.
-
Hi guys I am using the below code For NPV ,But i dont see any result,could you guys help me out..... DEFINE RPT DIMENSION TEXT MAINTAIN TLGT_RPT ADD 'APRV_AMT' 'CAP_APRV_AMT' 'EXP_APRV_AMT' DEFINE cflow VARIABLE DECIMAL <RPT RPT_ID> declare value num
-
Hey guys, WSDL is new to me... can anyone send me a very basic example on how to link java application to a WSDL. Your help is very much appreciated! Thank you very much.
-
BSP Performance Appraisal Form PDF Generation
Hi all, I need to find out how the standard SAP Performance Appraisal template generates the PDF format of this BSP page. Does anyone have any idea how and where this generation of this PDF file is done?
-
Disk Utility Failure - HELP!
I have no idea what is going on here. I have looked in the docs and can't see to find anything to help me. I really, really don't want to reinstall. Anyone, please HELP! Thanks! Kristy Verifying volume "Macintosh HD" Performing live verification. Che