Can I apply any application patch when all application services are down?

Hello All,
Can I apply any application patch when all application services are down?
Reg
Chirag Patel

Definitely you can. On some operating system (like Windows), if relinking is part of the patch then you cannot apply patches unless Application services are down.
Whenever we apply a patch, we enable maintenance mode through adadmin, this would stop users from accessing the application during patch installation. However, you still can use "adpatch options=hotpatch" to apply a patch without enabling maintenance mode.

Similar Messages

HT4623 How can u set up your iphone when all the files are deleted?

How can I set up my iphone if all the files are deleted?

What files are deleted?
Please explain

Customized massage when OBIEE (OPMN) services are down.

Hi,
We have OBIEE 11g installed on Weblogic 10.3.3.0 and we have to have an outage message when either BI presentation Service or BI server goes down.
Basically redirection to different URL or customized HTML page.
I believe there is a customization which possible in weblogic.
Can anyone direct me to it?
Thanks!

Neal,
This is a great question and it can be handled in a few different ways.
1.) You could modify the web.xml configuration file of the analytics web appliction for OBIEE. the web.xml file is located in teh /web/ folder for the main OracleBIServer. Remember, the analytics application (OBIEE Presentation Services) is just a Java application running in a container, so you can modify the deploy descriptor file to react to a 400 or 500 error. You get the 500 error when the Presentation Services component of OBIEE in OPMN is down. Here is a link on what you need to do for the web.xml file after you locate it (restart the BI Server and components afterwards. you may even need to redeploy the /analytics web application as well)
Re: Customise Error pages in Weblogic
2.) You could create a script that runs on the server at a short interval to run the opmnctl.bat|sh command and call the specific component to seek the single status of the presentation services comopnent. Parse the status and if it returs "Active" then all is good, if else, use your scripting skills to send a notification via email, etc.
A combination of the two might be plausible as well, I'm not sure of the full requirements you have.
Please mark this response as helpful or the right answer - Sunday is points awareness day. : )
Cheers,
Christian

Can i Know any standard Table where all the Subroutines are present?

Hi Folks,
Please let me know the Standard table name where i can find all the Forms ( Subroutines) .
Thanks,
Naresh

Hi,
There is no Std table in SAP to store all the performs used in the program.
Generally we use SCAN statement to find all the PERFORMS used in a program.
reward if useful
regards,
Anji

Help! Upload 8.1 on my iPad 2 and now I can't get any wifi nor can I reset any settings. When I try to go on my iCloud it is all greyed out and no longer recognizes my password.

Help! Upload 8.1 on my iPad 2 and now I can't get any wifi nor can I reset any settings. When I try to go on my iCloud it is all greyed out and no longer recognizes my password.
I also can't turn off "Find my iPad" on iTunes in order to do a restore.

Try a reset first. Hold down on the sleep and home buttons at the same time until the Apple logo appears on the screen. It takes about 10 seconds. After the iPad restarts, see if you can get into your settings.

When i browse OS X Server (Mountain Lion) Wiki through webdav i can't open any files and they all are 4kb in size?!

When i browse OS X Server (Mountain Lion) Wiki through webdav i can't open any files and they all are 4kb in size?!
Why is this ... is my configuration wrong in some way? I just put a tick mark in the

They seem to open fine from Numbers and Pages on the iPad.
This only happens on OS X macbook pro when i "Connect to server" from Finder.

IMAC can not see any wifi networks at all?

IMAC can not find any wifi network at all. A few days ago the Imac suddenly had no wifi and on turning the WIFI on and off it became apparent that when it scans for wifi it can see no wifi networks at all. I have several other computers and they all see the wifi networks fine. I assume it is a hardware issue but the hardware test I preformed comes up with no errors. Anyone got any ideas?

Hello Sage10,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
Best of luck,
Mario

Can i use any wireless printer when using air express

can i use any wireless printer when using air express

If you are looking for a new printer, any wireless model will work with the AirPort Express.
But, since you indicate that you have an iPad, you would want to make sure that the printer you choose is AirPrint compatible. This way, you will be able to print from your iPad....if you need that function.
See this Apple support document for info on AirPrint and compatible models.
http://support.apple.com/kb/HT4356

How can you reinstall SL on a older mini, I just upgraded to Lion .Since I downloaded it, I made a disk copy for the future when all the kinks are work out. But would really like to go back to SL for now. I tried my reinstall disk, which didn't work.

I have an older Mac mini using SL as my last upgrade and really like it.. Just last week I upgraded to Lion, and do not like it,,,I would like to reinstall SL but do not know how to go about it,,,I did burn a copy of Lion and will reinstall it when all the kinks are worked out..Can someone tell me how uninstall Lion and reinstall SL.....Thx

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

Just Updated iPhone 3GS to iOS5, Can't receive any incoming calls at all

Hi, I just updated my phone to iOS5 and now, I'm having these troubles.
- Can't receive any incoming calls at all
- The incoming calls directly goes to voice mail greeting
- No incoming rings & no missed calls alerts
- Also noticed the incoming text with 4 to 5 hours delays
- Sometimes 3G network get lost
The reception (status bar) is good level, can make outgoing calls okay and can send text okay.
I did try reset the network setting and it seems working a few hours then went back to troubles (mentioned above).
I've done 3 or 4 times reset but none have been resolved yet.
Anyone having a same issues?
I have
iPhone 3GS with iOS5
Network with O2 UK
Thanks,

After reset "All network settings" a several times, it seems working but few hours later it 's been gone back to troubles again.
Is this related to iOS5 or O2?
I've contacted the network carrier several times but no-one yet get back to me.
Any ideas, please helps.
Re: iOS5 updated and all incoming calls going straight to voicemail

I can't send any pictures on the message application. It tries to send it but ends up saying "Not delivered and an !"

I can't send any pictures on the message application. It tries to send it but ends up saying "Not delivered and an !" How do I fix this?

See:
* [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon ([[Site Identity Button]]) on the left end of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

PI2.1 Can I apply any Threshold Template to my Custom SNMP Template.

PI2.1 Can I apply any Threshold Template to my Custom SNMP Template?
For example, generate alarm if EIGRP down:)
Thanks, Oleg

Hi,
According to your post, my understanding is that you want to apply HoverPanel display template to a custom Item_CommonItem_Body display template in sharepoint search results.
You need to download a copy of the display template, then change the hoverUrl variable to point the HoverPanel display template.
Here is a similar blog for your reference:
Customizing SharePoint 2013 Search Display Templates with KnowledgeLake Imaging
More information:
SP2013 Search Display Templates Semi-Deep Dive
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I charged my phone and now I can't get it to turn on again. What do I do? I can't find a solution here. All I get are error messages.

I charged my phone and now I can't get it to turn on again. What do I do? I can't find a solution here. All I get are error messages.

Try pulling the battery for 10 minutes and putting it back in. Try pressing and holding the power button for a while 15-30 seconds to see if it will respond. Did anything happen to it, drop, submersion, etc. Was it functioning before you charged, When did it last work. Are you sure it charged up and the charger is working.

Email submit button causing required error when all required fields are filled in

It looks like if I have more than 1 instance of subform added, my email submit button triggers "..at least one required " error message when all required fields are filled-in.
I toggle subforms between "visible" and "hidden (from layout)". Any suggestion is appreciated.
ralph

The fields that are hidden should have the validate.nullTest property set to "disabled", something like;
TextField1.validate.nullTest="disabled";

Can I apply any application patch when all application services are down?

Similar Messages

Maybe you are looking for