Can i call a file which is not bundled with war file

i am dynamically creating a file which i want to call in another jsp but it is giving error file missing. i am working on sun app. server all the jsps servlet,beans are bundled with war file. can i call a file in some jsp which is not bundled with war. i am also setting path of server to that folder.but its not working. how can i do it.

Do you have a small code sequence that you can share with us?

Similar Messages

I want to download firefox 4.0 but can only get 5.0 which will not work with my corporate firewall. How can I download FF4.0?

I need to download FF4.0 to get through my corporate firewall. All I can download is FF5.0 which will not work. How can I download FF4.0?

#A link to Firefox 4 versions will not be offered by any '''''responsible''''' contributor here, because Firefox 4 versions contain stability and security issues <u>that will not be corrected</u>. Firefox 4 is a thing of the past.
#The only currently supported versions that a '''''responsible''''' contributor here will offer are Firefox 5 and Firefox 3.6.18. Firefox 3.6.18 is currently scheduled for support for only 2-3 more months, then it, too, will be a thing of the past. Firefox 6 will probably be introduced about the time the Firefox 3.6.18 support is discontinued.
#To downgrade to Firefox 3.6.18, follow these instructions '''''very carefully''''':
#*Back up your personal information (bookmarks, passwords, etc.) before proceeding just in case something goes wrong: https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
#**'''''If you need to''''', see the following article. See the last 2 sections "Copying files between profile folders" and "Your important data and their files" to restore important information '''''if something goes wrong in the downgrade''''': https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
#*Download and SAVE Firefox 3.6.18 to your Desktop, then proceed as in the "Clean re-install" article below: https://www.mozilla.com/en-US/firefox/all-older.html
#*Clean re-install: http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
#*You may also need to reset your extension databases in your profile folder. Do the procedure after locating your profile folder (see "Back up your personal information" above) and closing Firefox. The files will be automatically re-built when you re-start Firefox: http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Corrupt_extension_files

Can I filter by value which is not displayed in grid columns?

In excel it is possible to filter by value of measure which is not displayed in the report.
How can I possibly do this in Performance Point Grid? (in filter by value there I only see the measures in columns).
Please advise
Namnami

I found it is possible to filter by value by changing the MDX in the query tab.
(I filtered by certain existing value in design, then switched to Query and changed to the measure which is not displayed). I shows up correctly.
The problem is, once I change the query, I get an error when tring to connect a filter on a grid column:
"consumer parameter no-longer exists in the consumer webpart"
The grid looks "frozen"- cannot drill up / down etc.
How can I filter by value which is not displayed without loosing the ability to attach a filter to the grid?
Namnami

Can we call the procedure which contain commit in trigger

can we call the procedure which contain commit in trigger

Well, what i've noticed from op's past post - whenever op post - he/she posts multiple short questions here. This may be indication of some sort of assignment or any kind of online exam's ...... :?)
Regards.
Satyaki De.

How can i call this file path into my bsp-html to display the images?

Hi
I have a file path for an image like c:/test_logo.bmp.
How can i call this file path into my bsp-html to display the images?
moosa

Try this...
Can i have sample code in BSP-HTML to display images?

How can I find the profiles which are not in a role

Hi all,
how can I find all profiles which are not used in a role. Its important for a security check.

Hi Stefan,
you do one thing use the transaction SUIM
SUIM>>Profile>>By Roles
give all the role name and execute you will get roles with profiles
and extract to excel sheet
to get only profiles
suim>>profile>>by profile name or text give * and execute
and extract in excel sheet no compate profile coloumns get the profiles which does not there in any roles
hope ds helps
thanks
kishore

After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

You do not want EFI 2.2, it bricked many 2011 MacBook Pro machines.
EFI 2.3 is the fix. Software Update should install it if you need it, but it goes to the boot drive as that's where the hidden EFI resides.
Check out this link of machines and their EFI versions
https://support.apple.com/kb/HT1237
Also if your SSD should be in the hard drive bay as it makes a better boot/applicaitions drive, not a good storage drive as it wears out with repeated use and is not "scrubbable" like a regular hard drive
The hard drive should be in the optical bay and used as a storage drive, you have things all messed up inside your machine, Apple doesn't support or expect the optical drive to be used as such to begin with, then as a boot drive is just asking for trouble. So use the optical bay as storage and not as a boot bay.
Also you can't install OS X or Windows or use a Firmware restore disk because it only works from a internal optical drive, which you have removed.
https://support.apple.com/kb/HT2213
You need to learn all about cloning etc., as you have no other means to boot the machine.
https://discussions.apple.com/message/16276201#16276201

How can we find delivery documents which are not goods issued?

Hi All,
How can we find delivery documents which are not goods issued?
Thanks in advance

hi,
please check in VL06O.
there will be plenty of options on the same.
you are requested togo for push button FOR GOODS ISSUE from there u will go to VL06G only
your requrient will be satisfied.
regards,
balajia
Edited by: balaji timmampalli achari on Nov 11, 2010 12:39 PM
Edited by: balaji timmampalli achari on Nov 11, 2010 12:40 PM

HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

Can I call host file ( Unix Shell script ) from Oracle 10g trigger

Hi,
I am new to Oracle 10g. Can I call host file ( unix shell script ) from Oracle 10g trigger ?. I know it is possible. Pl explain me with small example
thanks & regards
parag

user12009546 wrote:
Hi,
I am new to Oracle 10g. Can I call host file ( unix shell script ) from Oracle 10g trigger ?. I know it is possible. Pl explain me with small example
thanks & regards
paragIf you are in 10g, you can simple call shell script from DBMS_SCHEDULER:
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'TEST_SCRIPT',
job_type => 'EXECUTABLE',
job_action => 'PATH_OF_YOUR_SCRIPT',
start_date => SYSDATE,
repeat_interval => 'FREQ=MINUTELY; INTERVAL=1',
enabled => TRUE,
comments => 'Shell script from Oracle'
END;
/

SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
I am trying to install Acrobat XI Std silently by SCCM.
I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for ym serial number?
Bryndon

Update on a couple of details:
@Sabian,
Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
@Sebastian
I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?

Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme. How do I change where appointments are put ?

When I receive appointments by email and accept them they go into the enourage "on my mac" ical calendar which is not synced with mobileme. How do I change where appointments are put ?
Or how can I choose where the appointment is put ?
I use the mobileme sync services so the ical calendars that are synced are those in the "[email protected]" group.
Please help !
Nick

Actually you can't drag the appointment to ano calendar - its says "You can’t make changes to this invitation., Only the organiser can change this event"
Also if you double click on the received appointment and open the window the only calendars shown that you can select are the 'on my mac" ones, and not the sync'd ones.
Any ideas welcome !!
Nick

Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me.

Can i call a file which is not bundled with war file

Similar Messages

Maybe you are looking for