Can I connect X-Fi to my DDTS-100 through coaxi

I currently have an Audigy 2 ZS but looking to upgrade, do these latest X-Fi card have coaxial so i can have true Dolby/DTS through my DDTS-00 (or through an amp/decoder)?Thanks

Hello,
I think that all the RS232/USB cables are not supported by default in OS X because each cable has its own driver,
you can check if your cable supports OSX in it's manufacturers website and download the drivers from there

Similar Messages

I can't connect to my gmail or yahoo account through the mail app

I was able to connect just fine until reset my iphone an hour ago, and was asked to update carrier settings, which I did. Now I can't connect to my gmail or yahoo account through the mail app. Through settings, I deleted my accounts, and set them back up, but still nothing. I can connect by going through safari, but it takes longer, and it's not as user friendly...besides that's waht the mail app is there foer, right? Please help! Thanks

...never mind...the problem somehow fixed itself...

I can't connect my iPhone 4 to my MBP through bluetooth

I go through all the correct steps but still can't make the two connect:
I search for my iPhone using the bluetooth setup assistant
BSA finds my iPhone and I click to pair with it
An attempt to pair window comes up with a number to check against on both my Mac and iPhone
I click the "Pair" button on my iPhone and get the swirling blade icon for about 30 seconds then a message saying that pairing was unsuccessful, but no reason why.
Any ideas what to try next?

Where does it state this?
I copied the following from the developer's website in regards to using an iPhone as remote with the app on a Mac.
Bluetooth is known to cause interference with the WiFi connection, so you should turn off Bluetooth on your iPhone or iPod Touch before attempting to connect.
This means turn Bluetooth off on the iPhone to connect the iPhone as a remote via wi-fi.
• Some firewalls and routers can cause connection problems. For the most reliable results, you can setup internet sharing in the 'Sharing' pane in System Preferences on your Mac. You can then create a network from the Mac over WiFi and connect to that network with your iPhone or iPod Touch.
It states you can use an iPhone as a remote for the app on the iPad when connected via Bluetooth with an iPad.

Apple Tv can't connect to iTunes when on same network through Airport Express

Hello All,
Its very rare i need to resort to the community for help but this one has me in a corner.
I have a 2013 Airport Time Capsule (3TB not that it matters), and a 2nd Gen Airport Express, and 2 Apple TV's (3rd gens).
Time capsule in basement of a large home. I can connect to the time capsule with iPhone 6, 4s, iPad 4, macbook air (2013 model), MBP (2012), mostly without issue however from time to time the signal gets kind of weak and cuts off occasionally from the iPad. Slows down a bit for the phones also. Not a huge deal, this is why I bought the airport express.
The Apple TV's are in two bedrooms beside each other on the 2nd floor in my home (office and bedroom). The Airport Express i've tried in 3 different areas of the house (1- Main floor of home on top of fridge in kitchen, roughly 20 feet away from the time capsule through the floor, 2- Main floor at bottom of stairs heading up to 2nd floor and almost line of sight to doorways of the two bedrooms also 20 feet away from the time cause through the floor, 3- 2nd floor hardwired directly to one apple tv (2nd apple tv through double layer of drywall and 10 feet away.)
In any of these locations the Apple TV's randomly get this issue where they do not see my Mac Mini which is hardwired to the time capsule, and running iTunes with all my movies shows and music of course. It gives me an error "Apple TV cannot connect to (name of library) as it may not be on the same network, please ensure iTunes is updated to the most recent version, and ensure you have the latest updates for your apple tv."
On my MBP I was running Yosemite Dev Beta 8, which is fine if that doesn't work, but it did and still had this random issue.
On my Mac Mini i was still running Mavericks with current iTunes (11.4 i believe, now 12 beta).
I unplugged my airport Express from power, now everything is connecting to my time capsule and apple tv's stream fine mostly, however there are slow buffering issues and occasional wifi disconnects just due to 2 floors in-between and quite a distance also, among multiple wireless devices using the network.
My questions are (yea yea a novel i know),
1- If the airport express doesn't see any data going through it for a while, does it go into a sleep mode which might be causing this "iTunes not found" issue even though other devices are still able to see my shared library on my network?
2- If yes to above - how can i shut that off?
3- If no, then why is this happening?
Mac Mini specs, i5 2.5ghz, 16 gb ram, 120gb ssd, 500 gb hdd, 2 TB External USB 3 hdd, ethernet hardwired to time capsule.
Air Port Express is in extended network mode synced to the Time Capsule.
Other devices will connect fine to my iTunes library when the apple tv's will not.
Any help appreciated! Thanks!

My questions are (yea yea a novel i know),
1- If the airport express doesn't see any data going through it for a while, does it go into a sleep mode which might be causing this "iTunes not found" issue even though other devices are still able to see my shared library on my network?
I have seen suggestions that bonjour goes into sleep mode.. but Apple offers no info and no controls so whether it does or not is irrelevant.
I am not clear what Time Capsule you have.. 2013 was the change over.. so is it AC tall one.. or previous model, flat one. The picture in the airport utility will show you.
Extend wireless is always a poor way to do things.. can you run some ethernet cabling to a point on the first floor where you could plug in an express.. if so that is the ideal.. if no, then using EOP (homeplug) adapters might work,, but they are not 100% guaranteed to work so make sure you know the return policy.
My experience is with the one extend wireless link that i do have .. it is fragile. Mostly it works.. but i have spent a deal of time making it work.
eg.. I use short names and different names for both bands.. so i can force the connection.. I set fixed channels.. I use the right firmware.. even so at certain times.. (full moon, strong North Wind.. you know typical wireless).. it will decide it won't work.
NOTE.. only airport utility v5 is of use to show link speeds and how things are going.. v6 airport utility (toyland fisher price version) has link status as poor, good or excellent.. which is to say the least.. uninformative.
so here is the link in v6 ..
It says.. good.. yeah.. !!
And here is the info in v5 utility. It has a workmen utility feel to it with piles of info.
The link between the two routers is the top of the listing.. and tells me it is linked at 5ghz and is running at 60Mbps at both ends..
By trial and error I have found left to its own devices it will connect on 2.4ghz and will join at 6Mbps when it starts dropping out.. so by taking full manual control I can produce reasonable link speed and reasonable stability.. and in v5 utility I can tell what is going on.. none of this is easy or like it should work out of the box.

Can you connect an iPad mini to an iPhone through Bluetooth to use the internet on the iPad? Thanks!

I used to connect my iPod touch to my former phone, a Nokia, via bluetooth and it allowed the iPod to connect to the internet.
Is it possible to do this with a non- cellular iPad Mini and an iPhone?
Thank you

Yes you should be able to or by wifi, here is the information about the iPhone hotspot if you need more information http://support.apple.com/kb/HT4517

Connectivity 5.1 to ddts-100

Can ne one help me? I got the decoder since last 20 days. Not getting the sound effects the way i wanted it. I m haivng philips 5.1 sonic edge sound card (psc605), and 5.1 inspire 5200 creative speakers and got new ddts-100. When i connect ddts-100 through my sound card i cant see LED of DOLBY and DTS fucntions on. I cant use or go the selection of DTS or DOLBY on decoder, even by pressing the appropriate switch on ddts-100. My motto for decoder is to play mp3 songs and music on PC. i dont want to run DVD or ne external sources with the decoder.. Well i can say.. with or without decoder sound effects stays normal. No change in sound effect. Well i m not sure, but i did analog connection and Coaxial connection with the pc. but still DTS and DOLBY function inactive on decoder. I can access movies , music, cinema modes from decoder selection.. but tat's no meaning to hear with that. I want DTS and DOLBY. Please advice me if there's ne extra cable needed or nething else must needed.. please specify exact thing to get these kind of setting on my decoder.

Ok, I will start from the beginning with the basics:
The DDTS-100 is a decoder. This means, it can only decode a signal and put it through to a speaker system. It is NOT an effect box, a soundcard, anything else than a decoder.
What do you get with the DDTS-100? The main unit, switchbox, cables.
How should you connect everything? You connect the switchbox to the main unit. Then, connect the soundcard's analog outputs to the switchbox. Then the speakers to the switchbox. Then any peripheral components such as DVD player, X-Box or the soundcard's digital out to the main unit.
Now what?
You have two settings on the switchbox. Why? Because as we have said before, most digital out soundcards can only produce 2 types of signals digitally. That is a PCM Stereo signal or an encoded data stream (either DD or DTS). If you play a stereo source such as an mp3 file and send it out as a pcm stereo signal you will only hear it from the left and right front speakers. So if you want to send discrete multi channel audio from your soundcard you have to use the analog output and set the switchbox to PC-mode. This effectively bypasses the DDTS-100 and plays the sounds directly from your soundcard to your speakers. However, if you have a dolby digital signal or a DTS signal coming from the computer, you can set the switchbox to Decoder-mode, the soundcard to SPDIF passthrough and digital out and the DDTS-100 will take the DD or DTS signal and send them to the corresponding speakers + light the DD or DTS on the main unit. Make sure to connect the soundcard with a coaxial cable, an analog output cannot send out encoded data streams. The DDTS-100 will decode the data information and send the sounds out to the correct channels. It will not do anything else. It is not made to do anything else. The best thing when listening to music and games is to do it in PC-mode using the analog outputs of the soundcard. You can, if you really really have to, play it in decoder mode and use either neo:6 or dolby prologic II on the main unit to upmix the stereo source.
AC-3 is not a music format. I doubt you will find any ac-3 encoded music files since mp3 or wma are the most common formats. Your best way of finding AC-3 material is on a DVD.
I think the best thing for you is to find out what the DDTS-100 is meant to do, and what it is not meant to do.

Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750

Hi,
I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.

Hi Richie,
Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
regards,
Rahul M

Can I connect Ipad 2 WiFi to Internet through 3G Android Bluetooth Phone?

Can I connect my IPad 2 Wifi to internet through 3G Android Phone's Bluetooth?

Not Bluetooth. You can connect if the phone has tethering/internet sharing. The phone has to put out an SSID for other devices to connect to. Like a wifi signal.

Can't connect to software update and other online services with airport

Hello, hopefully someone can help with this problem. When going to use software update using airport I get an error message saying there is a network problem and it can't connect. Also, when trying to use Microsoft Messenger it can't connect either way.
I can connect and use the internet using airport and apps such as iChat and Entourage work.
Can someone tell me why I can't connect to Apple's Software update service through airport?
Thanks

Is your network configuration something like the following:
DSL/Cable modem > (Ethernet cable) > [WAN] AirPort Extreme Base Station > (wireless) > MacBook?
...and, if so, you are able to get to Software Update when connecting your MB directly, using an Ethernet cable, to the LAN port of the AEBS...correct?
Since, you stated that you are using port forwarding, I assume that you have setup your MB with a static IP. Do you have any Proxies setup on either/both your Ethernet or AirPort connections on the MB?

Wireless Printing with Kindle Fire can't connect to HP1102w

Hi I can't connect mt Kindle Fire to my HP1102w through HPeprint

Hello DannyD219,
Welcome to the HP Support Forums!
It appears that you are unable to ePrint from the Kindle Fire to the LaserJet P1102w. I would like to offer a few suggestions that may help.
The P1102w is only compatible with ePrint after a firmware update, using a Windows computer and a USB cable, check for updates for the printer: HP LaserJet P1102w Firmware Update Utility.
Here is the guide for setting up an ePrint account: Getting Started with ePrint. (ignore steps 2 & 3, they are covered above)
For more or information on printing from a Kindle to the P1102w, view this: Printing from Kindle.
I hope this is a helping start.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

DDTS-100 not work

Hi. I recently obtained a DDTS-00. It worked fine, until today. I used it for a short while, then turned it off. I came back an hour later, tried to turn it on, but nothing happened. The red light wasn't on like normal. Power was plugged in, and the power supply felt slightly warm (but not as warm as when the DDTS is working.) The outlet was fine. I tried another outlet anyway, but had no luck. The power supply isn't generating any heat now, either.
Seems to me like the power supply isn't working. Anyone else have these troubles?

Your connection since you use the ddts-100 is digital so you use a coaxial or optical cable and the maximum speakers that can play with digital signal are 6.1.
If you want to use all of you speakers you have to connect the 4:3 cable.You can connect it directly from your soundcard to your speakers or through the cable divider .
Now if you're using the 4:3 cable check in Creative Audio Console that you check 7.1 option.
I hope I helped you.
http://forums.creative.com/creativel...ply_to_id=846#
Preview Post

Ddts-100, side left speaker not working

i have a ddts-100, and a set of t7700 speakers, all the channels work in the correct order except the side left channel has no sound at all. all the speakers are in full working order because they work perfectly on my pc. any one got any ideas?

Your connection since you use the ddts-100 is digital so you use a coaxial or optical cable and the maximum speakers that can play with digital signal are 6.1.
If you want to use all of you speakers you have to connect the 4:3 cable.You can connect it directly from your soundcard to your speakers or through the cable divider .
Now if you're using the 4:3 cable check in Creative Audio Console that you check 7.1 option.
I hope I helped you.
http://forums.creative.com/creativel...ply_to_id=846#
Preview Post

Connecting creative inspire 6600 to the ddts-100 decoder

ok so i was sedused by the idea of getting a ddts-100 to my inspire 6600 speakers,but the fact is i need to know some information:
the first thing is:will i be able to connect my speakers to the decoder and then to the soundcard?
my speakers have only RCA jacks for the satellites to connect them to the amp,and the amp have 3 assebled wires,3.5mm ones...my soundcard have also 3 connectors for the speakers,no digital output or optical,..only 3 connectors for the 3.5mm...so will i be able to connect it and then will it be able to reproduce sound like it was doing before?
2-the decoder says it can decode dolby digital ex,dts es,i don't know if i am saying this right but,sometimes we say decoding in 24bits/96khz .....its the dvd quality right? then will the decoder DECODE the dvd source in 24bits/96khz or is it the job of the soundcard?
3-will the decoder improve the listening experience in quality or surround?in case of dvd playing i know it would,but in case of listening to music?

shin8,
Are you getting proper output if you use the "TEST" button on the remote control?
Daniel

Connecting to my T6060 5.1 speakers with a DVD player thru Decoder DDTS-100

Hi, I have a DVD player which has 2.1 audio output (left and right), a coaxial and an optical audio output. Can you tell me how to connect the creative T6060 (5.1) speakers with the DVD player. Can I connect the speaker with the DVD player with the decoder DDTS-100 to get 5.1 effect. Will the speakers would be working. Thanks,Jwell

Your speakers should have a cable with 3 plugs on the end (orange, green and black). That plugs into the matching sockets on the DDTS-100, and you set the switch to 5.1. Then you need a lead to connect the dvd and its up to you if its coaxial or optical. For coaxial you can use pretty much any phono to phono lead, which you may already have. Ive got a feeling the DDTS-100 comes with one of each anyway. Thats all there is to it.

DDTS-100 Decoder and Speaker Connections

Hi,
I was thinking of purchasing the Creative Decoder DDTS-100 product, but I was just wondering if anyone could answer some questions about the connections on the back of the unit first.
I already have all the necessary speakers for a 5.1 setup including the Sub, however the connectors for all these speakers are of the two-wire variety (one red, one black), as opposed to the standard 'phono type' connector. Does the Creative Decoder DDTS-100 have the facility to accept the two-wire connection and if not, is there any way to convert the speaker cables into compatible formats for this device? Also, how do non-Creative speaker products WITH the Phono Type connector connect to the DDTS - from the pics of it I have seen, the surround speakers seem to connect via 3 cables on the back of the Switch Box? I'm lost!!
Many thanks in advance!

I dont know if its said, but you need an amplifier for those speakers. The DDTS does not amplifies the signal, like those that came from Creative. The amplifier is in the sub's box.
Another thing that you need is the proper adaptor between de DDTS outputs (green, blak, orange) 3.5mm male to, whatever your amplifier uses.
In my case, i have trouble finding that cable or cables to convert to RCA. You can use 2 regular stereo adapters for the first 4 channels: green = Left and Right front speakers, black = Left and Right rear speakers.
For the other 3 channels (Center, Rear center, Sub) you can only use adapter, hence the difficulty. I tried with made for digital cameras (Left-white, Right-red, video-yellow) but it only work partially. I can't get sub from the yellow cable (the other 2 works perfect). I only get subwoofer sound when you preform noise test (from the DDTS).
Anyone any idea?

Can I connect X-Fi to my DDTS-100 through coaxi

Similar Messages

Maybe you are looking for