Can I crop the image in the canvas

Can I crop the image from the canvas area so I could make several windows to add some video clips or do I have to just reduce the size of the image and make the composite of the videos. i want to make vertical, rectangle and square composite of several video clips.

The Time Remap (simulating the corresponding function in FCP) can do basically 2 things:
a. apply keyframing to the speed of the clip: you can start a clip with speed = 0% (like a freeze frame) and gradually speed up the clip to its end at 100% (standard speed); or viceversa; or start at 100%, slow down to 0% in the middle and back up to 100% at the end. You can apply just any speed variation by keyframing the Speed control.
b. force the clip to play a frame in a time different than in the original clip; for example you want to have some action originally at time 2secs in sync with a drum roll occurring at frame 2,5secs: just keyframe that action frame at 2,5secs. Then the video clip before 2secs will slow down to meet the drum roll at 2,5secs and then speedup to go back in sync at the end of the clip.
A few notes:
- only video is affected, not audio (different from FCE Speed command)
- the clip length does not change
- to see the result in the canvas always render: what you see in the viewer is not the final result.
- instructions on its use are in the download page - if they are not clear let me know.
As a suggestion you can read Ken Stone's Time Remap up to Time Remap in timeline excluded. It describes this function as implemented in FCP4, but its principles (and some details) are the same as in my filter.
Let me know...
Piero

Similar Messages

  • 'shrink canvas to fit' tool - how can i alter how close it crops the canvas?

    - how can i alter how close it crops the canvas? at the moment it crops right up to the image, i need to to crop leaving a 1mm gap arround the image.
    is this possible?

    Hello Scweedall
    I understand that it is difficult to determine which forum to post in since there are so many. This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the correct forum so that it can get proper attention.
    I'll put I this posting in the xx community so the experts there can help you.
    We also have many other forums relating to other Adobe products
    http://forums.adobe.com/community/
    http://forums.adobe.com
    Out of curiosity, can you tell me how you found our forum page?
    Thanks
    Scott

  • Can you change the canvas size in AI CC . If so how? Not the artboard but the canvas behind it. I have a large cad drawing.

    Can you change the canvas size in AI CC . If so how? Not the artboard but the canvas behind it. I have a large cad drawing.

    Vandushia,
    The Workspace size is fixed, 16,384 points.
    I am afraid you will have to work in a suitable scale, which could be 1:2, 1:4, 1:10, or whatever is most convenient.

  • Can't crop an image in CC2014

    Hi  I can't crop and image in photoshop. I keep getting the message "Cannot complete your request because of a program error".
    I tried resizing the canvas and received the same error.
    I uninstalled (removing preferences and reinstalled the photoshop app but still get the same error.
    I am in windows 7 Service pack 1. 
    Thanks in advance  for any good ideas on resolving this problem.
    Rose

    Sounds frustrating. Have you tried chatting with Adobe tech support? They're in India, but very smart and very polite. It may take awhile (like an hour), but they've been able to solve every issue I've had so far ...
    http://helpx.adobe.com/contact.html?step=PHSP
    Fill out the details until you see the "Contact Us" link, which leads you to the CHAT link. Be patient, and they will certainly tell you how to solve the problem.
    Good luck.

  • Can I crop an image then apply the Ken Burns effect?

    I shot a panoramic still with the iOS6 on my iPhone 4S.  I guess because I didn't hold it steady there are white boundries on the top and bottom.  I would like to crop these pieces out and then apply the Ken Burns effect. 

    Crop the image in Preview or iPhoto.

  • Banner size video - how can I set the canvas to an odd size?

    I'm interested in creating web page ad banners that include some looping video.
    Is there a way to set the canvas size to 350x250 or some other odd size?
    If not, do you know if any other video editing software can allow this?
    Thanks,
    DAN
    PowerBook G4   Mac OS X (10.4.4)   FCE HD

    No. FCE works with fixed sizes.
    Try your question on the FCP forum next door, FCP can use other sizes.
    Al

  • Can't get the canvas back to normal

    hi all,
    i'm very very new with FCP and i can't figure out what i did wrong.. i was dragging some clips on the canvas and i must have hit some key short-cut or something.. now my canvas has a square-frame in it. this square-frame can be rotated and re-shaped, but it won't go away. the canvas remains black and doesn't show anything, it's blacked-out even when the play head is scrolling for playback.
    i must have done something i can't figure out.. PLEASE HELP !
    thanx !

    You turned on wireframe display. Not at the edit machine right now but if you look at the top of the Canvas window, click on the rightmost icon at the top of the window and select the first option. this will turn things back to the basic display.
    x

  • Can you crop an image in Flex?

    Hi.  I am writing a small Air application in Flex where a bunch of images will be imported at a resolution of 120x80 pixels.  To use them in the application, I need them to be square at 80x80 pixels.  Right now they are squished because I am forcing the 120x80 image to fit into and 80x80 container.  To make it look more professional, I need to crop the images to 80x80 pixels.  Is there a way to do this in Flex, and if so, how?  Thanks.

    Once the images are cropped to 80x80 pixels, the images will be manipulated by rotating and moving them.  Because of this, I thought that cropping them would be a better alternative to masking(I don't know if masking also masks mouse-overs and things like that, which is why I thought about cropping)
    So if anyone knows how to crop an image in Flex, I would love to hear it.  Or if you know of any good resources or tutorials for it, could you point them out.  Thanks.

  • How can i display an image in a canvas where full of Graphics2D component?

    i just learn to use Graphics2D components, but my boss ask edme to replace all the rectangles by some folder image in application's canvas... Gee! i got stuck there for 2 days
    could u help me please?

    the problem is i drew some Rectangles on the canvas ("g2.draw(new Rectangle2D.Double(x, y, rectWidth, rectHeight));") and now the requirment is to replace all these Rectangles to some image (the folder icon image i made with photoshop "folder.jpg")
    what am i suppose to do?? i cant find any method to make this amendment.
    reagarding to the drawImage() method could u please send me some sample code to demonstrate how to implement that? i am trying to understand all paramaters like (BufferedImageOp/ ImageObserver ) but i still cant get it.
    i am a new guy in java programming, please help me out here, thanks a lot!

  • Can I crop an image more than once

    Once I commit to a crop in Expert can I crop it again?

    peterjuliem72719006 a écrit:
    Once I commit to a crop in Expert can I crop it again?
    If you mean you can crop the already cropped file, yes.
    If you mean you can try another different crop from the original picture, no.
    In an editing session you can use the history panel to get back to the editing state before the first crop.
    If you choose to 'open in ACR' (automatic if you shoot raw), the ACR edits are 'non destructive', you can always change the crop settings even after you have applied many adjustments with the various sliders.

  • Can I export as a Flash Video? And can I crop the right hand image?

    2 Questions.
    I'd like to create a flash video. Is that possible to do in Final Cut Pro?
    Also, I have a video image where on the right side of the screen there is a white vertical line. Is it possible to edit this out of the image in Final Cut Pro?
    Thanks.

    If you have Flash Pro installed, the FLV export component should have been installed. This will allow you export flash flles from FCP.
    Still, the user has flash 9 installed, you can use h.264 files. Simply change the esported file's suffix from mov to flv.
    x

  • Can I change the canvas colour on pages?

    I was trying to create a basic graphic, when I imported it to my chosen programme it had a white backround around the edge. I was wondering wether I could change the background from white to transpatent.

    Putting on my Gen 3 iMindReader I get from that that you have exported some page as a pdf and discovered it has an opaque background. All pdfs exported from Pages will have an opaque background otherwise it would look like a stained glass window instead of a sheet of paper.
    Create your graphic with transparent wherever you want in Pages, group the elements, and copy.
    Transfer to Preview .app and go command n then save that new image as a pdf, or copy and paste it into whatever application you are using (it will also be a pdf).
    Peter

  • Can you crop the length of videos filmed in the camera roll?

                     /\

    Yes, from the Users Guide:
    Trim a video: While viewing a video, tap the screen to display the controls. Drag either end of
    the frame viewer at the top of the video, then tap Trim.
    Important: If you choose Trim Original, the trimmed frames are permanently deleted from
    the original video. If you choose “Save as New Clip,” a new trimmed video clip is saved in your
    Camera Roll album and the original video is unaffected.

  • Make the Canvas window lower quality?

    This is obviously be a newbie question so please dont flame me. I am editing using the Animation codec and its quite heave for my CPU so how can I lower the canvas (preview) screen's quality so that I can view it without dropping frames constantly?
    In After Effects, I can easily set it to low quality and edit without any issues but I havent figured out how to do it in Final Cut Pro 6 yet.

    That isn't the issue. The issue is that the ANIMATION codec is a high data rate codec. The canvas isn't your problem, the problem is the hard drive speed. You would need a 5-8 drive RAID to play this codec back without dropping frames.
    You cannot compare AE to FCP...they play back differently. AE renders on the RAM before it plays back. FCP doesn't do this.
    Shane

  • Can you change the pasteboard color? (Dark Gray to a much lighter gray)

    Can you change the pasteboard color? (Dark Gray to a much lighter gray)

    In CS6 and later you can change the User Interface in the Preferences.
    A brighter interface changes the pasteboard color. Tou can also check the Canvas Color to white.

Maybe you are looking for

  • Rough Cut Planning Profile in SOP

    Hi, Need an input on the Values keyed in to the Rough cut capacity profile? Is there any documentation on the same? I have maintained the Time span as 1 work day and the basse quantity as 1. In the resource table, i have keyed in the work center and

  • Router works for OS X, Not Windows XP

    I have a Linksys BEFW11S4 ver. 4 wireless router with the lastest firmware. I also have an Apple Macbook running Boot Camp with Windows XP Pro. I can connect and use the router on OS X just fine but I am unable to connect under Windows XP. It just ke

  • Is there any table for relation between batch number and valuation type ?

    hi, I would like to know where i can find relation between batch number and valuation type ? thank you and Best regards Fernand

  • Retrieve parameters from LDAP using authentication module

    I have existing LDAP that contains organization people and their attributes. I have several web applications that use existing LDAP for authentication and authorization. My goal is to deploy single sign-on with openSSO so that users are authenticated

  • Zeiss Otus 1.4/85 ZE not listed in Bridge metadata

    The latest release of Camera Raw 8.7 states that the Zeiss Otus 1.4/85 ZE is supported. Whilst in Camera Raw it is listed in the Lens Correction Tab, in Bridge the lens is just described as 85mm in the Metadata section. I also have the Zeiss Otus 1.4