Can I develop an application on ios that can be called by other applications?

I'm trying to develop a service application on ios. I know that I could use custom url schema to communicate between applications and I can get handleUrl event , in case of using objective c. But I don't know if I can do that or how to do that in flash builder 4.5.1.
I found an article which said I can regist my custom url schema in app.xml but I found nothing about how I can handle the custom url call. Is there an event or what? Does anybody know that?
Thanks!

Hi Jenny,
I've just tried custom URI with iOS and I am able to receive the argument with length 1, which has the complete url I browsed.
For Eg: If I launch url example://xyz?abc, I get the complete url as 1st element of the e.arguments array.
public function invokeHandler(e:InvokeEvent):void{
label1.text = "";
label1.appendText(e.arguments.length.toString() + " ");
for (var i:int=0;i<e.arguments.length;i++)
label1.appendText(e.arguments[i] + " ");
label1.appendText(e.reason);
Reason should always be standard if it's not launched from login. Currently on Mobile it will be standard only.
Hope it helps.
-Pahup

Similar Messages

  • My location service is not working from the day one the response is that (cannot able to determine the location) .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?

    From the day one the response is that (cannot able to determine the location) while using ios5.1 .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?.Which means that is there is any problem in my ipad ? currently running on IOS 6.

    Your location is determined from a location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured. The database is built and updated by actually driving around and mapping router locations.
    Since you just moved the location of your router has not been updated in the database and when you use Maps you will see your old location.
    If you go outside your house you can be correctly located because your iPod sees other routers which are in the location database. Note that you do not need to be connected to a router for your iPod to see it and obtain its MAC address.

  • What is highest level of IOS that can be put on the old Power Book G4?

    What is the newest IOS that can be put on an old Power Book G4?

    Once you get the updated OS up and running you may run into another problem.  Many web browsers and programs no longer support the older Mac OS's. I ran into this issue with my iMac G4 and PB G4.
    Regards

  • Can I get Paid service for development of iPad usable forms that can be uploaded to salesforce

    Can I get Paid service for development of iPad usable forms that can be uploaded to salesforce

    Download Firefox 3.6.19 from here:
    * http://www.mozilla.com/en-US/firefox/all-older.html
    * Save the File on your Desktop
    Uninstalling Firefox
    * https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
    Installing Firefox on Windows --- Install the Downloaded Firefox 3.6.19 version
    * https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
    Check and tell if its working.

  • How can I set up my imac so that I have access to other family members documents?

    How can I set my my imac so that I have access to other family members documents when I am logged on my side?

    Hello,
    I find Dropbox a great way of having access to my files on all Mac accounts, any PC on the web and my iOS device. 
    regards
    mrtotes

  • How can I edit a dng in lightroom that can be viewed in bridge?

    I imported my files as DNG and edited some in LR 5 (color, cropping). I thought that I was editing the data in the DNG file; but when I opened the file in Bridge none of my edits were visible. How can I make edits in one program that can be seen by the other?

    You need to be aware.
    a. Bridge/ACR in Photoshop read and write change to a sidecar file for raw files or to the file header for DNG,Tiff and JPEG. (the info is in the file)
    b. Lightroom by default reads and writes to the Lightroom Catalog File. (the info is in the Catalog)
    c. Bridge/ACR cannot read or write to the Lightroom Catalog file.
    d. There is an option in Lightroom that allows Lightroom to also write to the sidecar file .xmp or to the file header in DNG, TIFF and JPEG files. This is necessary if you wish Bridge/ACR to read the info from the files.
    e. If you open a file directly in Bridge/ACR those changes will be stored as .xmp data. If the file had previously been imported into Lightroom those changes will not automatically be read by Lightroom, you will probably get a warning that the .xmp data has changed. If you choose the option to update the catalog the new .xmp file will change info in the catalog.

  • Is iWork's compatible with excel?  Can I create an iWork's spreadsheet that can be opened in excel?

    Is iWork's compatible with excel?  Can I create an iWork's spreadsheet that can be opened in excel?

    You will need to export it as an Excel spreadsheet.

  • How can we restrict the type of components that can be dragged and dropped from the sidekick CQ

    how can we restrict the type of components that can be dragged and dropped from the sidekick CQ

    Generally drop the components at parasys. The components allowed on the parsys is control via the design mode of the page.So restrict components at the design of the parsys. http://dev.day.com/docs/en/cq/current/wcm/working_with_cq_wcm/using_edit_designandpreviewm odes.html#Design%20Mode

  • Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

    Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

    Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

  • Help - "Acrobat is being used by another application and cannot open PDF files until the other application is closed."

    Hello,
    I searched this site and google for this error terminology and come up dry.  I support a user who has been for years using Acrobat 5 (yes, I know...) to read files in a client DB program, as well as other PDF files on their PC.  In the last week or so, they have started gatting this error "Acrobat is being used by another application and cannot open PDF files until the other application is closed." any time they attempt to open a PDF file attached to an email (via Outlook).
    It is my understanding that they cannot upgrade to a newer version of Acrobat because of limitations of their client software, but had not previously had any issues viewing PDF notes from the DB, and PDF attachments in their email.
    I have tried uninstalling and re-installing, as well as tried using Adobe Reader 7 & 9 in conjunction with Acrobat to try to get around this issue, but have not been successful.
    Any ideas?
    Thanks,
    Jesse

    I don't have an answer to your technical problem. The product I assume is Acrobat that you are talking about (based on the post title), Adobe is the company name. This is a good place to ask questions on Acrobat if folks can figure out what you are talking about. They will ask for the product version number (like AA9.3.3), operating system, and other applications if appropriate. Also, just what you are doing that generates the message.
    As for Adobe, you are not likely to get an answer from them here in the user forum. You will be lucky if you can get an answer if you can contact them and not be on hold for more than an hour (sorry, this is why a lot of folks end up in the forum).
    So, to help others try to answer your question, what are the products and versions involved? What OS? What are you doing when the message comes up.

  • Can you burn a master through iDVD that can't be copied?

    Periodically it would be helpful for me to be able to create a master that can't be copied on a duplicator. I've looked for, but not found a setting in iDVD that adds some kind of an anti-copy security to the burn. Is it there and I'm just missing it?
    Doing it through iDVD would be the easiest, but if not, then what about creating a disk image, then burning through Disk Utility? Is there a way an anti-copy master burn there?
    I don't know how to use DVD Studio Pro (yet), but does that allow for anti-copy master burns?
    Thanks.

    As stated above, if it's a burned dvd (as opposed to a commercially pressed dvd) then it ain't copy protected (ever).
    Here's what apple says in their knowledge base (see question 12):
    http://support.apple.com/kb/TA26404?viewlocale=en_US#faq12
    As suggested above FCS will indeed allow you to set copy protection flags but the burned Dvd itself is not protected. See the following links for DVDSP:
    http://support.apple.com/kb/TA25523?viewlocale=en_US
    Keep in mind that even adding CSS is no guarantee the content won't be copied.
    My suggestion for burned dvd's like those created through iDvd is to make an AutoStart Movie at the very beginnging with the standard FBI Warning (essentially asking others to not copy the content). Which Bengt Wärleby stated already is only a plea for the viewer/s not to use your content illegally.
    Not much more to do unless you're into spending the big bucks for mass duplication and adding CSS.
    Message was edited by: SDMacuser

  • How can i set the number of results that can be displayed on the page

    hello im just wondering how i can set the numebr of results that can be dispaleyd on the jsp, when the there are more than 5 results i want the suer to press more
    how is this odne could anyone send me a example code?
    and also how can i get results from the query displayed as select list options, so that when they press one of teh results it goes to correspnding page
    Thank you

    Hi,
    I assume that you have the connection to the DB.
    You can try this code.
    Statement stmt = con.createStatement();
    String sql = "<some sql code for selecting>";
    ResultSet rs = stmt.executeQuery(sql);
    rs.last();
    int count = rs.getRow(); // this is the number that shows how many numbers you have after select query
    rs.first(); //we moved cursor again to the begining of the results.
    if (count > 5) {
    for (int i=0;i<5;i++) {
      //as an example
      rs.getString(0);
      rs.getString(1);
      rs.getString(2);
    out.print("<a href='morePage.jsp'>More</a>");
    else {
    for (int i=0;i<count;i++){
      //as an example
      rs.getString(0);
      rs.getString(1);
      rs.getString(2);
    rs.close();
    stmt.close();I hope this would help you.
    If you have problems let me know..
    Ismail TURK

  • Can Flex Limit the Number of Prints that can be made?

    Is there a way to create a Flex app to limit the number of
    prints that can be made from it? I need to limit a coupon that
    prints out, and I'm new to Flex. Is this possible to be created? Is
    anyone interested in possibly contracting this job? This is a
    serious inquiry. Email me if you have an idea, and a quote.
    [email protected]

    No. Printing is either permitted or not, but there is no way any document can control the print quantity.

  • Can Adobe Configurator 3 create one panel that can be installed in other versions of Photoshop?

    Hi,
    I am able to create a new panel for CS5 and CS6, however, if I create a CS5 panel (thinking it should work in CS6 as well), when I try to install the panel ZXP file in CS6 Extenstion Manager, I am unable to do so...meaning, the CS5 panel will not load for users with CS6?  Is there any way to create a panel in Configurator 3 that will export one zxp (or similar package file) that can install in multple versions of Photoshop?
    I note in Configurator 2, I was able to export an mxi file that I could convert in Extension Magager 3 and that seemed to open without issue, however with Configurator 3, I don't see any other export options but zxp.  Any help on this would be great!  Thank you!!
    Evan

    Because of the difference of scripting interface of CS5 and CS6, Configurator cannot create a panel that works for multiple versions of Photoshop. You need to create two of them for CS5 and CS6. In your case, I suggest you create a panel of CS5, and then create a version of CS6 by clicking "Edit->Convert to CS6". (Some buttons will be lost if those buttons are not supported in CS6)
    Configurator 3 creates the zxp for you and you need not to create one with mxi file and Extension Manager.

  • Need to run VI on boot or call from other application

    I am looking for the most basic way to get Labview to run a VI upon bootup or call from another application (without having to hit the run button on the toolbar.) I would rather not have to build an application; I don't want to buy the professional version. I want my data acquisition to recover from a power outage reboot and keep going without human intervention. Is there a way to build an init that launches the VI in run mode? A colleague of mine has convinced me labview is the way to go for a new experiment, but this is one stumbling block that needs to be resolved. Thanks for any help you can give.

    i have used the startup folder to run labview vi's on several machines and it *can* work just fine.
    however, sometimes there is a timimg problem and i get the message 'vi not found,' then labview usually loads the vi and runs - but leaves the error message, which can cause problems with later operations.
    today i had this problem with a 3.4 G HP machine running Win200. Labview 7.1 & DAQmx.
    my work around solution is to use the *MarcroScheduler* program. i call a it from the startup folder. it does the following
    (a) start Labview 7.1
    (b) wait 1 minute
    (c) execute the vi.
    without the wait state, Labview 7.1 will not run the vi properly.
    good luck with your applications.
    cu,
    larryb

Maybe you are looking for