Can I dinamicly load a class with custom class loader ?

Hi,
I was wondering if you found answer to your question, and also were you using your custom class loader inside a signed applet as I am in a similar situation, and was wondering if you could help me. An example would be great...
Thanks a lot.
Regards.

Similar Messages

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

Can not create template based page with customized page type.

I built a customized page type (with persepective attribute) and wanted to build pages with this type. If the new pages do not based on any template, it works fine. However, if I wanted to use a template, the page type was set back to "standard"!
Steps to reproduce it:
1. create a new page type - test page type.
2. create a new template = test template.
3. create a new page - test page.
3.1 choose the page type to be "test page type"
3.2 fill in the form including the new attribute info.
3.2 choose the page template to be 'test template"
3.3 click finish
4. click the properties of "test page", it shows that the page type is "standard" and the new attribute information is gone!
If in step 3.2, no template is chosen, the properties of the new page shows the page type is "test page type".
I tried to find a workaround.
1. create a page with "test page type".
2. covert the new page to template.
I got this error message:
Error while copying page. (WWC-44262)
(WWC-00000)
Looks like customized page type and template can not coexist. Is this a bug?

How long should the upgrade take? And should it be attempted on a production (infrastructure on machine 1/middle-tier on machine 2) Windows 2000 architecture? Or should be wait for 9.0.4? Or ... should I ask this in a TAR? Thanks!
Mike

Can the number format be controlled with custom css styles

I have a union query where the first query returns a count that I formated as a number '999,999' and the second query returns percentages that I want formatted as '99.9%' I can use conditional formatting to determine which part of the query the result came from but conditional formatting doesn't allow me to control the number format so I was wondering if custom css styles would allow me to control the format. Is converting the number to a character and concatenating a % sign ia better option. I was able to do this using BI Publisher and a different apporach but I want to be able to do it with Answers.

Make sure the address bar in Contribute is displaying your URL and
not a file path.
Your administrator can remedy this by going to the role settings and making sure the Home address is set to the URL. If you can't get the admin to update the role settings, you can enter your URL into the address bar and then the site should be able to find linked style sheets.

ADF wont work with custom LoginModule! Question for Mr. Nimphius!

ive setup login module as shown in:
http://www.oracle.com/technology/products/jdev/howtos/10g/jaassec/index.htm
code:
actionContext.getHttpServletRequest().isUserInRole("Administrators") works! but i also want this code to work in ADF:
appmod.getSession().isUserInRole("Administrators")
with default loginmodule "oracle.security.jazn.tools.Admintool" everything is ok! i can get roles in adf but with custom login module i cant!
in ApplicationModule config i have setup
jbo.security.config =
jbo.security.context = oracle.security.jazn
jbo.security.enforce = Must
jbo.security.loginmodule = oracle.sample.dbloginmodule.DBTableLM.DBTableLoginModule
please help!

thank you very much for the reply!!!!
i did what you told but no luck... :(((
i still can not get user role from application module!
this code:
if (AppModule.getSession().isUserInRole("Administrators"))
System.out.println("User is in role! ");
simply does not work!
ive tested on standallone oc4j, ive tested on embeded jdveloper 10.1.2.1 !
i get NullPointerException at at oracle.jbo.server.security.jazn.JboJAZNUserManager.isUserInRole(JboJAZNUserManager.java:113)
the thing is that i can use isUserInRole() from request but i can not from application modulle....
...ive lost hours in decompiling and tracking down ADF code just to realize that there is no way to use custom login module with ADF because the thing is hard coded to use xml or ldap..
the only way i see how to solve the problem is to extend oracle.jbo.server.SessionImpl
and override
getUserRoles()
and
isUserInRole(String s)
i can substitute session class with my own by setting
SessionClass = oracle.jbo.server.ExtendedSessionImpl
in file jboserver.properties (which is inside bc4jmt.jar)
the easier way is to write my own function isUserInRole() in EntityImpl... i always can get user principal name with AppModule.getUserPrincipalName()
what do you think?

Clearing vendor account with customer

Hi
how can i clear a vendor account with customer. the customer is also created as vendor, vice-versa...
and to print a receipt of that transaction?
thanks

Hi,
If you require clearing between the customer and vendor, the following requirements must be met:
The customer number must have been entered in the corresponding vendor master record.( Control tab)
The vendor number must have been entered in the corresponding customer master record.
The fields "Clrg with vend." or "Clrg with cust." must have been selected in both master records. (Payment transaction tab)
Regards,
SAPFICO

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Don't get WCF with custom Class working

Hey
I am starting with playing around with WCF. But I don't get it working. I can't see my Problem and this since a few days...
So, I will explain in Detail, what I did so far.
I created a blank ASP.NET Project (VS 2013)
Within I created 2 files
The first file is the Contract Interface
mports System.ServiceModel
Namespace DataClasses
<ServiceContract> _
Public Interface ITestService
<OperationContract> _
Function ReturnClass() As List(Of TestDataClass)
End Interface
End Namespace
Ok, the second is the TestDataClass
Imports System.Data.Services.Common
Imports System.Runtime.Serialization
Namespace DataClasses
<Serializable> _
<DataContract> _
Public Class TestDataClass
<DataMember> _
Public Property Id As Long
<DataMember> _
Public Property Firstname As String
<DataMember> _
Public Property Lastname As String
End Class
End Namespace
Ok. - The next Thing, I was doing is to create the "returning" information
Imports System.ServiceModel.Web
Namespace Proxy
Public Class TestData
Implements DataClasses.ITestService
Public Function ReturnClass() As List(Of DataClasses.TestDataClass) Implements DataClasses.ITestService.ReturnClass
Dim retList As New List(Of DataClasses.TestDataClass)
retList.Add(New DataClasses.TestDataClass With {.Firstname = "My", _
.Id = 2, _
.Lastname = "Name"})
Return retList
End Function
End Class
End Namespace
Ok - So far, as I understood, This should be all correct. (I hope)
The next, I did was to add a WCF Data Service 5.6 file
Within this file I changed the code to this:
Imports System.Data.Services
Imports System.Data.Services.Common
Imports System.Linq
Imports System.ServiceModel.Web
Public Class DataModelWcf
Inherits DataService(Of Proxy.TestData)
' This method is called only once to initialize service-wide policies.
Public Shared Sub InitializeService(ByVal config As DataServiceConfiguration)
config.SetEntitySetAccessRule("*", EntitySetRights.AllRead)
'config.SetServiceOperationAccessRule("*", ServiceOperationRights.All)
config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2
End Sub
End Class
OK. - When I now test the Service by clicking on it and run in browser, I get the following:
<?xml version="1.0" encoding="UTF-8" standalone="true"?>
-<service xmlns="http://www.w3.org/2007/app" xmlns:app="http://www.w3.org/2007/app" xmlns:atom="http://www.w3.org/2005/Atom" xml:base="http://localhost:1523/DataModelWcf.svc/">
-<workspace>
<atom:title>Default</atom:title>
</workspace>
</service>
OK - The Service itself runs. - But I don't get any "Operation". I can't see my failure. - I tested around for the last few days, but I don't have a Clou, what's wrong...
I also added a Service into the config file (but don't think, that this will make some differences)
<system.serviceModel>
<services>
<service name="WCF_Test.Proxy.TestData">
<endpoint address="" contract="WCF_Test.DataClasses.ITestService" binding="basicHttpBinding"/>
<endpoint address="mex" contract="IMetadataExchange" binding="mexHttpBinding"/>
</service>
</services>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" />
</system.serviceModel>
So, thanks for every Little hint to solve this.
THX - Have nice Weekend!

Hello Zero-G. _,
>> But I don't get any "Operation". I can't see my failure. - I tested around for the last few days, but I don't have a Clou, what's wrong...
I am afraid that you have mixed the WCF and WCF Data Service, here is a WCF Service example(it works with the Entity Framework while it is not WCF Data Service):
http://www.codeproject.com/Articles/127395/Implementing-a-WCF-Service-with-Entity-Framework, please check it, in your case, you are use this mode and you do not need to create WCF Data Services.
If you want to write a custom method in WCF Data Service, you could refer to this link:
https://msdn.microsoft.com/en-us/library/dd744841(v=vs.110).aspx, as you can see, although if we declare a custom method, it would not show in the web browser, we call it as adding
the method after the based service link directly:
http://localhost:12345/Northwind.svc/GetOrdersByCity
Or call it by using a client project which could detect this method and call it as in this blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/12/01/way-to-expose-custom-method-in-an-entity-class-from-wcf-data-service.aspx
Regards,
Fred.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

Look at this support article:
http://support.apple.com/kb/ts2570
Ciao.

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

NEF's for the D7100 should work with the latest version PSE13
You can download here and try free for 30 days:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

I have "chatted" with customer service 5 different times. I was sent here. I have activated Photoshop Elements 9 on two different iMacs. They are both dead and I am unable to get it to activate on my newest computer. iMac. Can anybody help me?

Unfortunately, only adobe can help you with that, as most people here are just posters such as your self and don't work for adobe.
If you go here and use the Chat now button (bottom of page), they should get you up and running by resetting your activations.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Unable to publish projects with inserted video - error message The Flash video can not be loaded

I've created a project in Captivate 6 with two slides that have inserted videos in them
Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
Below are my settings and the error message
Any suggestions would be greatly appreciated.

Your screenshot indicates you are publishing to a folder on a network drive.
Have you:
Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

Can I use multiple p class="logos" tag with the same name within the same html page?

I was told not to use <div class> tags too many times. I was using them for text, images, to clear floats, I basically built my website using multiple <div class> tags. So if I can't use multiple <div class> tags could I use tags multiple times in the same html page?
I have a string of logos at the bottom of my webpage which will all be using the same css characteristics for all logos. Would this be the proper way to write the code:
HTML
Logo1<a href="...></a>
Logo2<a href="...></a>
Logo3<a href="...></a>
Logo4<a href="...></a>
Logo5<a href="...></a>
Logo6<a href="...></a>
CSS
.logos {
margin-left:10px;
Here's my website: http://www.darbymanufacturing.com/test_website/index.html - this is the website built with all div class tags
I restarted the website in order to write the code properly so that I don't come to errors when uploading on the server like I am having with the website link above.

Instead of writing something like this -
Logo1<a href="...></a>
Logo2<a href="...></a>
Logo3<a href="...></a>
Logo4<a href="...></a>
Logo5<a href="...></a>
Logo6<a href="...></a>
Why not have something like this -
<div id="logodiv">
Logo1<a href="...></a>
Logo2<a href="...></a>
Logo3<a href="...></a>
Logo4<a href="...></a>
Logo5<a href="...></a>
Logo6<a href="...></a>
</div>
with CSS like this -
#logodiv p { ... }

How can I make a bullet item with a custom Bullet character such as a check mark ?

Hi Everyone,
I'd like to make a list with Bullets, but I can find a bullet character which I am looking for. Especially I'd like to make Bullet characters available in PowerPoint, such as check mark, and others. How can I make a bullet item with a custom Bullet character or picture such as a check mark ?
Regards
Cem

Cem777 wrote:
Hi Everyone,
I'd like to make a list with Bullets, but I can find a bullet character which I am looking for. Especially I'd like to make Bullet characters available in PowerPoint, such as check mark, and others. How can I make a bullet item with a custom Bullet character or picture such as a check mark ?
Regards
Cem
Search InDesign help for "change bullet characters" (without quotes,) and use the technique described there with the Zapf Dingbat font as suggested by Peter S.
You can also use InDesign's glyphs panel (Window > Type & Tables > Glyphs) to scroll through all the character sets in all the fonts that InDesign has access to on your system, to look for check mark characters.
After you have created a paragraph style that applies the customized check-mark-bullet that you want, every time you apply that paragraph style, the custom bullet appears. So, while it's a few steps to set up the style the first time, from then on it's automatic.
If you really need a particular bullet that's not in any font you have, you'll need to search for fonts that have check mark characters and buy one or use a free one. Caution: free fonts aren't always created to the same strict standards that commercial fonts from reputable font foundries observe; free fonts sometimes cause problems when printing or exporting to PDF. You can search Google for "fonts with check mark" (without quotes.)
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Can we modify the standard AOL Message with custom Message in Seeded Page?

Hi,
I have a requirement to change AOL Message with custom Message in Seeded Page.
In a seeded OAF page when a user clicks on a submit button a standard AOL Processing Message is populated.
I Need to change the Standard Message and call Custom Message.
Did controller extension and found that both the messages are populating.
called the code after super and tried to call before super also.
Did any one face this issue and resolved it. Kindly provide the solution.
Regards
Chaitanya

Hi Gyan,
I have tried by extending a sample custom controller.
Below is the code of TestCO calling create message
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
      OAApplicationModule am = pageContext.getApplicationModule(webBean);
      if (pageContext.getParameter("Test") != null)
          OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM",    null,
          OAException.CONFIRMATION, null);
          pageContext.putDialogMessage(confirmMessage);
}Then I extending the TestCO to XXTestCO and it is calling Update Message
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
      super.processFormRequest(pageContext, webBean);
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        if (pageContext.getParameter("Test") != null)
            OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
            OAException.CONFIRMATION, null);
            pageContext.putDialogMessage(confirmMessage);
    }got below Confirmation
Confirmation
Employee &EMP_NAME with the number &EMP_NUMBER has been created.
Employee (&EMP_NAME) has been updated.
Tried below approach also calling the message before super class
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        if (pageContext.getParameter("Test") != null)
            OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
            OAException.CONFIRMATION, null);
            pageContext.putDialogMessage(confirmMessage);
      super.processFormRequest(pageContext, webBean);
    }got below Confirmation
Confirmation
Employee (&EMP_NAME) has been updated.
Employee &EMP_NAME with the number &EMP_NUMBER has been created.
My requirement is to print only the message which I have kept in Extended controller i.e. Update message
Regards,
chaitanya

Can I dinamicly load a class with custom class loader ?

Similar Messages

Maybe you are looking for