Can I disable the LCD screen from displaying the Network Name or Password of my device?

Can I disable the LCD screen from displaying the Network Name or Password of my device? I feel that having this information readily available to any who can turn on my device is a security flaw.
I have change the network name and password and would like to secure that information .

Worked with VZW tech support and finally found where you can disable or mask the display of the network name and password on the Jetpack LCD screen. You need to access the admin screen of your jetpack (http://my.jetpack/) . From there, navigate to Jetpack Settings --> Click on Wifi tab -- Click on the Wi-Fi Options link halfway down the page and it will show the two settings that control the display of network name and password.
As they say, a picture is worth a thousand words...here are screen shots showing how to get to these settings. ...
The LCD display will show ********* for the network name and password if the two checkboxes above are unchecked. I really think these settings should be disabled to be begin with.
Oh well...posting here to share with those interested...

Similar Messages

How to reinitialize the sel screen after displaying the output..?

Hi All,
I have a report program. In the selection screen, I will provide the input parameters and execute the program which displays the output on the screen. Now, if I come BACK to the selection screen, the values which I entered earlier will appear on the selection screen. My requirement is... If I come BACK from the output screen to the selection screen, the selection screen should be blank. I mean, all the values I entered earlier should be cleared. Could anyone please tell me how to do that.
Thanks in advance.
Best regards,
Paddu.

Hi Paddu,
the selection screen will be reinitialized automatically. Only if the INITIALIZATION event or the parameters use SET/GET parameter IDs (addition MEMORY ID pid) the values will prevail.
You may clear everything in INITIALIZATION event.
Regards,
Clemens

Brand new Canon 5d mark ii has dust inside of the LCD screen.. !!!

Hello guys. I just received Canon 5d mark ii + 24-105mm lens kit in the mail couple of days ago. It's an amazing camera that will help to improve my work. I didn't want to use the camera until I received the screen protector and the UV filter to make sure that the camera is well protected. (My previous SLR ended up having so many scratches on the LCD screen)
So today I received the screen protector. I was cleaning the Lcd screen to install the protector and I realized that there is a dust inside of the LCD screen. I didn't even use the camera more than to see if it functions right. It's totally visible.
I was wondering if anyone had this problem with their brand new camera ?!?!
I know there is an option to exchange the camera since it's in the return/exchange period but I really don't have time for this. I have photo shoots coming up and I really can't be without my camera more than couple of days. Unfortunately they don't have the kit in any of Bestbuy location in Los Angeles area that I can go in and exchange. They will ask me to return the camera kit to a Bestbuy location and wait for them to credit my Bestbuy card (which will take 3-4 days - and i don't have enough credit limit to buy another one right away and be patient for them to give me my money back ) and replace an order online again.
Any advice appreciated...
Thanks

First of all. Thank you for your reply. I actually realized couple of other things that made me suspicios that this camera was used before. Of course i might be wrong however - the package shipped from Bestbuy Return center + loose diopter adjuster knob before than even touching it + having dust inside the lcd screen + hair and dust inside the lens - made me really uncomfortable keeping this camera.
Don't get me wrong, I love Best Buy. I've been shopping from Best Buy for years. I have been purchasing many things every year and I really do trust them. That's the reason why i didn't mind to have Greek Squad 3 years extended waranty package with my purchase. However spending almost $3500 for a top of the line camera and not having it flawless from the first day made me a little disappointed. That's all..
I will be going to Best Buy later today and return the camera. I am just hoping that they can refund the money to my card in couple of days so i can place an order for a new one. Even better if i can return the camera and they can place an order from the store for me..
Thank you so much for your reply again...

Red Snow on black areas of the LCD screen

Hello,
last week my MacBook Pro 13" fell on the floor and got a hit on the side of the LCD screen.
Now the LCD screen is showing a sort of red snow (like the snow on an untuned tv) on the black parts of the screen. As far as I can understand it's either an issue of the LCD, the motherboard or the cables between the motherboard and the LCD.
What do you think it could be? I am going to order the parts in order to do the repair myself but I want to be reasonably confident of what I need to replace.
Cheers
/Luca

The disassembly procedure is different according to the MacBook model you have. There are many guides around that you can consult in order to open the machine. You can search with "MacBook disassembly" and you will find many pages. I found mine on ifixit.com.
On a unibody MacBook pro you have only to remove the screws on the bottom (remembering the positions as few of them are different), and lift the bottom cover.
You will find a miniature flat cable on one of the corners of the motherboard. Just gently push it in the connector to make sure it is well attached. Important! make sure you have a static wrist strap connected to ground, or in alternative touch a ground connection before in order to get rid of any static you might have on your body.
Hope this helps

How can we disable the 'Improvement Program' from all the apps in TCS5?

How can we disable the 'Improvement Program' from all the apps in TCS5, so that the end users are not able to see the option in the help menu?
We have tried changing the value of bUsageMeasurement (HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown) to zero, but it did not help.

You’re probably going to have to contact Support on that one.

How can I remove the lock screen from my iphone5s

how can i remove the lock screen from my iphone5s. Please help.

JModi wrote:
I want to get home screen as soon as I click the top lock screen button.
The "lock screen button" locks the phone. It will not take you back to the home screen. Thus the difference in the nomenclature for the "HOME" button and the "LOCK" button...

Hi My grandparents just bought an iPod Touch for me from Dubai, UAE. I can't see any facetime on the home screen nor in the settings. I've read that it's not possible. But is it possible if I get my OS updated again from India?

Hi My grandparents just bought an iPod Touch for me from Dubai, UAE. I can't see any facetime on the home screen nor in the settings. I've read that it's not possible. But is it possible if I get my OS updated again from India?

There is no way you can activate Facetime on an iPod touch purchased in the UAE. The government there required Apple to lock off Facetime at the hardware level and there's no way to unlock it. Reinstalling iOS, regardless of country, will not help. If you want Facetime, you will need to sell your UAE-version iPod and buy one there in India.
Regards.

Is there any way to stop the print screen from dropping down on top of the page to be printed. Can the print screen be moved?

Is there a way to stop the print screen from dropping down on top of the page to be printed. Can the print screen be moved? When the print screen drops down, it covers the page and the info needed to create the file. Thank you

You will find that this is application dependent. Most Apple applications such as Safari and Mail will use the "sheet" type of dialog boxes that you are referring. There is no way for the user to change that behavior. Other, non-Apple, applications like Firefox use a "modal" dialog box for printing etc. The modal boxes can be moved around so you can see the page behind.

I broke my iPod 5 screen last week, the whole screen is cracked.The front camera is kinda broken. I got my iPod like a year and half ago, so the warrant is over. I got my iPod from a Apple store. Can Apple fix my iPod?, how much will it cost? Respond ASAP

I broke my iPod 5 screen last week, the whole screen is cracked.The front camera is kinda broken.The back of the iPod is pefectly fine and the home button is fine too. I got my iPod like a year and half ago, so the warrant is over. People said Apple doesnt repair devices, they exchange for it.I dont think u can exchange my iPod. I got my iPod from a Apple store. Can Apple fix my iPod?, how much will it cost? Respond ASAP. Or name some places to repair it?

Really. You cannot exchange a 32 gb for a 16 gb at all.
Sorry.
The Canada Proce happens to be $149. You can look this up yourself.
http://www.apple.com/support/service/

My daughter dropped her ipod touch 4g into water. We bought a new one 3 days ago which she has dropped. The screen has smashed! Can we use the good screen from the water damaged ipod to replace the broken one

Can anyone help please? My daughter dropped her ipon touch 4g into water which resulted in it being ruined. We bought her a new one three days ago and she has just dropped it and cracked the screen!!!
Cany anybody tell me, are we able to use the perfect screen from the water damaged ipod to replace the broken one on the new ipod or, would the water damage have ruined the screen too?
Thanks in advance

Your very best option would be to take it to an apple store and exchange it for an alike model which can be a refurbished, or new unit. The repair/exchange price is about 99USD. http://support.apple.com/kb/index?page=servicefaq&viewlocale=en_US&geo=United_St ates&product=ipod&select=REPAIR_PRICING

How can you tell if you need to just replace the glass on an ipod 4g or the glass and the LCD screen?

i just broke my ipod touch 4g about a month ago and i think it is just the glass but i am not sure. It cracked and the glass started falling out of the top right corner and today, the white part started cracking. is this just part of the glass or is it part of the LCD screen? I want to figure this out because i dont want to order a repair kit with an LCD screen if i dont have to. thanks in advanced

On the 4G the outer glass and the LCD screen is one bonded unit.
iPod Touch Repair – iFixit

How do I stop the Cloud Screen from popping up on my PC when charging my LG phone

I have an LG G3 with 4G android software. I am not interested at all in using Cloud storage. Every time I plug my phone in to charge on my computer's USB port, the Cloud screen pops up asking if I want to subscribe or some other question which I forget. Always in Full Screen. Can anyone tell me how I can disable this or get rid of it in some way or another? I have uninstalled the Cloud App on the PC, but it didn't make any difference.

We want to see you enjoying any aspect of your phone, Dond13. But if you don't want to utilize the Cloud application on your phone, please follow the steps below to reset the application and continue to use your phone as normal without accessing the Cloud:
Select device Settings->Device->Apps.
On the Apps screen opened, slide the screen to the left until 'All' tab is displayed with the list of all applications.
Select 'Cloud' application from the list.
Select 'Clear cache' on the Cloud App Info screen.
Select 'Clear data' on the Cloud App Info screen
Select 'Force stop' on the Cloud App Info screen.
Navigate to the list of applications on the device UI and launch the 'Cloud' application.
Select 'yes' when the following message is popped up
'We have detected a new mobile number on this device, xxx-xxx-xxxx. Would you like to reset the application and start using your new mobile number'
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

3D Doesn't work after changing the LCD Screen

Hi, I had a problem with my Toshiba Qosmio F755-3D350 the LCD screen broke and I have to replace it with a new screen.
The new screen is the same model : B156HB01 V.0 from Au electronics, that the original screen on my laptop had.
everything works fine the resolution, the camera but when it comes the 3D it doesnt work the Leds on the web camera doesn't turn on and activate the wiggle stereoscopy.
How can i activate again the 3D or Where is the problem?
Thanks.

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

How do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

how do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

Hello drews,
To try and resolve the 6A00 error, we will want to ensure that no paper jams or obstructions exist in the printer. To do this, please follow the steps below:
ASF / Paper Output Slot
Turn off the printer.
Remove paper from the ASF.
Gently pull the jammed paper out.
If paper is visible from the ASF, use both hands to pull the paper out slowly.
If paper is visible from the paper output slot, use both hands to pull the paper out slowly.
If the paper tears and a piece of that remains inside the printer, open the scanning unit (printer cover) and remove the paper from inside the printer.
Note : Be careful not to touch the components inside the printer.
Turn on the printer and confirm that the Alarm light is off.
(If the jammed paper remains in the printer, the paper may be automatically ejected.)
Load paper back into the ASF.
Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
Top
Paper jams inside the printer
Turn off the printer and disconnect the power cord and USB cable.
Remove the jammed paper slowly using the following procedure.
Open the rear cover to check if the paper is jammed.
Pull out the cassette and check if the paper is jammed inside the cassette area.
Stand the printer with the rear side down, holding the document cover.
Press the tabs together and pull the green cover toward you.
Check if the paper is jammed.
(If you were not doing Duplex printing, you do not have to follow this procedure.)
Close the green cover and place the printer back to a normal position.
Reconnect the power cord and power on the printer. Confirm the Alarm light is off.
Load paper back into the ASF or cassette.
Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
Top
Clearing credit card-sized paper jammed inside the printer
Credit card-sized and 4" x 6" sized paper must be loaded properly. If this media is not loaded properly, it will feed into the printer and will not exit. Credit card-sized paper should only be loaded in the ASF and in portrait orientation. 4" x 6" sized paper can be loaded in the ASF or cassette. But must be loaded portrait orientation.
If credit card-sized paper was loaded in landscape orientation in the ASF and did not eject (exit), please follow this procedure.
Turn off the printer.
Load the same paper type that is jammed inside the printer in portrait orientation.
Power on the printer.
The paper stock in the ASF will automatically feed the jammed paper from the printer.
To resume printing, load the paper in portrait orientation.
If 4" x 6" sized paper was loaded in landscape orientation in the cassette and did not eject (exit), please follow this procedure.
Turn off the printer.
Open the rear cover.
Fold in four a piece of letter-sized plain paper.
Push in the folded paper until it hits the jammed paper.
If the jammed paper is visible from inside the printer area, pull it out and proceed to step 7.
If the jammed paper cannot be pulled out, push in the folder paper from the rear so the jammed paper is in between the feed rollers.
Pull out the folded paper and close the rear cover.
Power on the printer and confirm that the Alarm light is off. The jammed paper should automatically eject.
To resume printing, load the paper in portrait orientation.
If you still experience the same error after performing the steps above, please turn off the printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, unfortunately, the printer will require servicing to resolve the issue. Please click on the Contact Us link below to obtain your servicing options.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Is there a way to check if the touch screen and display works whilst iPod is apart?

Hi,
I pulled my iPod Touch 4G apart up to the circuit board in order to pull out the headphone socket.
Before I pulled it apart, the screen was cracked but everything was perfectly visible and the touch function worked perfectly.
Because the screen was cracked, when I pulled the iPod apart, I obviously lost small chunks of the screen.
Now when I plug the two plugs from the LCD screen into the circuit board and put the iPod together without screws, it looks like this:
http://s251.photobucket.com/user/matt9210/media/2013-06-19014523_zps86e6bc6e.jpg .html
So I'm not sure whether buying a new screen is the answer, because I'm worried it will still have the same effect on the new screen.
Another question: The headphone socket wasn't working. I had to hold the earphones in order to get any sound, and knocking them would lose the sound. I checked with other earphones before opening the iPod, so it's a problem with the iPod. What do I do with the headphone socket to avoid this problem?
Also, is this good enough to replace the iPod screen? A lot cheaper than I thought, thought I'd check what the catch is.
http://www.ebay.co.uk/itm/New-LCD-Display-Screen-Digitizer-Assembly-7-Tools-for- iPod-Touch-4G-4th-Gen-UK-/290908549993?pt=UK_Replacement_Parts_Tools&hash=item43 bb803369

Hi,
I pulled my iPod Touch 4G apart up to the circuit board in order to pull out the headphone socket.
Before I pulled it apart, the screen was cracked but everything was perfectly visible and the touch function worked perfectly.
Because the screen was cracked, when I pulled the iPod apart, I obviously lost small chunks of the screen.
Now when I plug the two plugs from the LCD screen into the circuit board and put the iPod together without screws, it looks like this:
http://s251.photobucket.com/user/matt9210/media/2013-06-19014523_zps86e6bc6e.jpg .html
So I'm not sure whether buying a new screen is the answer, because I'm worried it will still have the same effect on the new screen.
Another question: The headphone socket wasn't working. I had to hold the earphones in order to get any sound, and knocking them would lose the sound. I checked with other earphones before opening the iPod, so it's a problem with the iPod. What do I do with the headphone socket to avoid this problem?
Also, is this good enough to replace the iPod screen? A lot cheaper than I thought, thought I'd check what the catch is.
http://www.ebay.co.uk/itm/New-LCD-Display-Screen-Digitizer-Assembly-7-Tools-for- iPod-Touch-4G-4th-Gen-UK-/290908549993?pt=UK_Replacement_Parts_Tools&hash=item43 bb803369

Can I disable the LCD screen from displaying the Network Name or Password of my device?

Similar Messages

Maybe you are looking for