Can I extend my Sky wireless signal with an AirPort Express?

Hi,
I recently got an AirPort Express in the hope that I would be able to extend my wireless signal to areas that currently have a weak and unreliable signal from my Sky SR101 router. I am currently able to do this with an old Belkin 'Wireless G Universal Range Extender' but it is not ideal - it's quite temperamental, it has to be reset from time to time and it also provides pretty low speeds. I've tried configuring the basics for the AirPort Express but can't seem to get it to work. I've seen on the forums that some people think it is impossible to extend a non-Apple base station's signal with an AirPort Express while others have managed to get it to work. I would suspect that if I am able to do it with an outdated Belkin range extender I should be able to with a brand new AirPort Express - I don't know!
Very grateful for any thoughts/comments/solutions.
Thanks for reading.

Perhaps have one connected to the Sky router with an Ethernet cable and then boost the signal from that one with the other? Would that work?
If the 1st Gen AirPort Express really is a 1st Gen, then yes, you could do this.
Check on the side of the AirPort Express for the model number.....hard to see in the faint print.....so you may need a magnifying glass.
A 1st Gen AirPort Express is model number A1264.

Similar Messages

Extending an existing wireless network with an airport express

My wireless signal is quite weak in my room so I'm looking for a way to extend the range of the network by using an airport express. I understand i can't do this wirelessly but is it possible to run an ethernet cable from my existing router to the airport express in my room and then have a stronger signal in my room?
Thanks in advance!

Welcome to the discussion area, Aaron!
If you connect an ethernet cable from your existing router to the AirPort Express, and then configure the Express to "Create a wireless network" with the same name, security settings and password, this will in effect, extend your current wireless network.
The Express must be configured as a "bridge" to operate correctly on your network when you do this, meaning that the setting for Connection Sharing on the Express will be set to "Off (Bridge Mode).

How do I extend a netgear wireless network with an Airport Express?

I can get the Airport Express to join the network, but not extend it. I am trying to extend my network to improve the signal to my Apple TV. I have read in some places that his can't happen. I have a Mac as my computer.

Any idea how to merge the Netgear extender to the primary Netgear network?
You have a question for Netgear Support here since your question involves two Netgear products.
This link would be a logical place to start:
Contact Support - Netgear
While it is possible that someone on an Apple forum might know how to do this....it is also unlikely that they will see this post and respond. You can certainly wait to see if someone responds here if you wish.....but if it were me, I would contact Netgear about a Netgear question.

Having trouble with extending an Apple wireless network with a AirPort Express

Trying to extend the range of my AirExtreme with a AirExpress:
I get stuck when the AirPort Utility ask is I'm sure I want to switch networks. if I select switch I loose the AirExtreme. If I select don't switch it take me back to the beginning. Any help will be appreciated.

You have to "switch" networks to be able to pick up the signal from the Express and configure it with new settings.
Once the Express is configured it will become part your existing network when you see a green light.
Then, switch back to your regular wireless network on your Mac and everything will be on the same network

I am unable to join my existing wireless network with new AirPort Express

I am unable to join my existing wireless network with new AirPort Express.
I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
Any suggestions? Thanks in advance.

Welcome to the discussion area!
It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
Power down the AX
Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
Release the reset button after 10 seconds
When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
Do you know the exact security type that your D-Link router is using? That is the key element in the process.
Open AirPort utility, click Manual Setup
Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
Click the Wireless tab
Wireless Mode....Join a wireless network
Wireless Network Name...must exactly match your D-Link wireless network name
Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
Wireless Password...must match the D-Link network
Click the Music icon to enable AirTunes
Click Update to save settings
Any luck?

I can't get a reliable wifi signal between my Airport Express in the office and Express in the house and i can't get a cable between the two. Any suggestions for getting internet connection in both buildings?

I need to get internet to both the house and my office, which is in a separate building approx 20m from the house. I was advised by Apple to buy an Airport Express, set it up on one or other building, and connect wirelessly to the other. Tried that, but couldn't get a reliable signal.
I was then advised to buy another Airport Express and use it as an expander in the other building. Trouble is, i can't get a reliable wireless signal between the two Expresses, so it keeps dropping the connection, and is slow when it is connected.
I rang Apple again and was told that i could try a third Airport Express between the two existing ones, but that is impossible as there is only outdoors between the two.
It would be very difficult and expensive to get an ethernet cable between the two buildings (have to cut through concrete etc), and I see from the discussion forums that an Airport Extreme has the same wireless signal as an Express, so replacing one of the Expresses with an Extreme seems unlikely to resolve the problem. Can anyone think of any other options?

The Powerline adapters mentioned by edex67 are your only hope if you cannot run an Ethernet cable.
Even if the home and office are on the same electrical circuit, you won't really know how well the Powerline adapters might work until you actually try them out at your location.
For that reason, it would be a good idea to understand the store's return policy before you buy.

Unable to create a wireless network with my airport express. Please help!

I am trying to setup a wireless network with an airport express, and connect to it with my Macbook. I just bought both of these and haven't been able to get wireless to work.
I initially plugged the ethernet cable from my cable modem into the airport express and plugged it into the wall. The macbook detected it when I opened airport utility, but the express had a flashing amber light and I was unable to connect. I then unplugged the express and re-started the cable modem. This time, the airport express showed a solid green light -which should mean that it is working correctly. However, the macbook did not find the airport express device when i searched for it using airport utility. I am able to connect the macbook directly to the cable modem, after re-starting the modem, and access the internet so at least some of the systems are go.
Any ideas? Thanks in advance for your help.
Tom

Is the issue that you cannot access the 802.11n AirPort Express Base Station (AXn) with the AirPort Utility that is running on your Win7 PC? ... or that once you have configured the AXn, the PC is unable either to find the new wireless network or can find it but cannot connect to it?

Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

Yes, that's one of the things airplay is for...

Extending a wireless signal with an Airport Extreme Base Station, and an Airport Express as the "repeater".

I understand that I can extend Airport Extreme wirless "reach" with an Airport Express, but how? I've read through the posts and they say to "connect" the Airport Express. What does that mean, to an outlet, to an ethernet cable, what?

I understand that I can extend Airport Extreme wirless "reach" with an Airport Express, but how?
Enable the option on the AirPort Extreme to "Allow this network to be extended"
Then configure the AirPort Express to "Extend a wireless network"
If you do it this way, the AirPort Express connects to the AirPort Extreme using wireless only.
If you have the ability to run an Ethernet cable from the AirPort Extreme to the AirPort Express and leave it connected permanently, that will provide better performance than the "wireless only" type of connection.

Losing wireless connection with my airport express with my powerbook G4

Lately I've been losing my wireless signal from my powerbook G4 to my airport express. The light on my airport express still shows as green, so I was wondering if the trouble lied in wither the airport express or my mac? I'm running on the 6.2 version that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then turn it back on, as well as unplugging the airport express and replugging it in as well. This is starting to occur now once a day at least.
I keep my powerbook in the same room as the airport express, and it is usually in fact sitting on my desk above it...so range isn't really an issue.
This is getting tedious, and would like to know how to nip this in the bud.
Please be detailed in your responses. I'm not to tech savey. Thanks.

Lately I've been losing my wireless signal from my
powerbook G4 to my airport express. The light on my
airport express still shows as green, so I was
wondering if the trouble lied in wither the airport
express or my mac? I'm running on the 6.2 version
that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then
turn it back on, as well as unplugging the airport
express and replugging it in as well. This is
starting to occur now once a day at least.
I am also experiencing the same problem, also only since recently updating my AE firmware. I will provide a bit more information so that maybe someone will be able to offer some suggestions.
I have one AE connected to a BT Broadband modem. My iMac is down the hall, connected to the AE for internet and for Airtunes. What I experience is that I will lose connectivity to the airport itself. In fact, sometimes I can actually watch as my airport signal indicator in my menu bar jumps up and down repeatedly (although sometimes the airport signal just disappears altogether and then when I go looking for it in my Airport menubar, my network is no longer listed). The green light on my AE always stays constant when this happens (even when the airport signal goes away completely). The BT modem seems to be fine.
AE basestation firmware is V6.3.
I am connected to my AE using WPA Personal (anyone know what the Group Key Timeout option does? Mine is set at 60 minutes by default... no idea if that is connected to my issue, but I didn't want to play with it since I don't know what it does).
Channel: Automatic, Closed Network. Access Control is enabled so that only my iMac can access the network. Airtunes is enabled.
Under wireless options, multicast rate is 1, interference robustness is not enabled, and transmitter power is 100%.
Anyone have any ideas about what the problem is and what I can do to try and fix it?
Thanks.
G4 iMac 800 MHz Mac OS X (10.4.4) 1 GB RAM

Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

Can I extend AP Extreme Wireless network with my a TC and also use TimeMachine with it?

I currently have an Airport Extreme Base Station in my Home Office in the basement and would like to purhcase a TC to be placed upstairs to extend the Wireless Signal and also use it with TM to backup several apple computers.
Do I need to run a Network Cable from the AE in the basement to the TC unit or can I simply piggy back off the wireless signal produced by the AE? I can do either, but just want to make sure I get what i'm looking for.
I'm also running Apply TV in many rooms....will the TC unit produce a new wireless signal or extend the wireless already in the house. This is critical as Apple TV Units and the device connecting to it must be on the same network.
Thank you for your help in advance.
david

I currently have an Airport Extreme Base Station in my Home Office in the basement and would like to purhcase a TC to be placed upstairs to extend the Wireless Signal and also use it with TM to backup several apple computers.
That is doable.
Do I need to run a Network Cable from the AE in the basement to the TC unit or can I simply piggy back off the wireless signal produced by the AE?
Wired Ethernet cable connections are strongly preferred in setups like this, since there is no speed loss in a wire....and much less chance of an error occuring over a wired connection. The wireless signal produced by the Time Capsule will be much faster with a wired connection as well.
Wireless between the AirPort and TC might work.....IF....the Time Capsule is located where it can receive a really strong signal from the other AirPort, but at best, the speed will drop by about half when you do this.
I'm also running Apply TV in many rooms....will the TC unit produce a new wireless signal or extend the wireless already in the house. This is critical as Apple TV Units and the device connecting to it must be on the same network.
The TC will extend the existing network using either a wired or wireless connection.

How to extend range of my wireless network with an Airport Express connected by ethernet with Airport Utility 6.0

Hi everyone,
I have AirPort Express 802.11n (1st Gen) firmware 7.6.1, that is connected to my main wifi base station (a TimeCapsule) by ethernet. I would like to extend the range of the Wifi Network but am not clear on how to do so using the new interface of Airport Utlity 6.0.
Does anyone have any tips on how to do this?
BR
AK

Hi Everyone!
Many thanks for the tips. I have downloaded 5.6 and have set my Airport Express in the "Extend a wireless network" mode. I was still having a few problems with the quality of the wifi connection in different parts of my apartment (by no means a very large one, but walls seem to be made of extra dense concrete here in Singapore) and went out and bought a few powerline adapters by TP Link (http://www.tp-link.sg/products/details/?categoryid=1862&model=TL-PA211#spec).
If you don't mind a slightly long post, I would be very grateful for any tips:
My setup is now as follows:
Main room
Time Capsule - connected to a Cisco DPC3925 Modem (http://www.cisco.com/web/consumer/support/modem_DPC3925.html) both connected to a TP Link adapter 1.
iMac - connected via Ethernet to TP Link adapter 2 and wifi enabled
Airport Express 1 - connected by Ethernet to TimeCapsule (and thus TP Link adapter 1) used to stream audio to a stereo that doesn't have an optical cable input. Since it is an Ethernet connection, I have wifi turned off.
Apple TV 1 - connected by Ethernet to TimeCapsule (and thus TP Link adapter 1)
Bedroom A
Airport Express 2 - connected via ethernet to TP Link adapter 3
Bedroom B -
Apple TV 2 - connected by Ethernet to a TP Link adapter 4
After following the tips on setting up the extended wifi network, I find that when I use a wireless client (e.g. iPad, Macbook air, etc) in either Bedroom B or Bedroom C (both don't have wifi in the room) the connection is very poor. Even more odd is that the connection in Bedroom A, one that does have Airport Express 2. To be clear when I mean very poor, I mean Skype/facetime skips frames and freezes... this doesn't happen when I am in the main living area.
I would be very grateful for tips on how to set up the most robust network given the configuration above. Specifically, I am wondering about:
When I select Extend a wireless network option on Airport Utility 5.6 the summary page states that it is connecting using "Wireless Network" vs what I would expect it to say "Ethernet connection".
Is there any advice on whether to enable 5Ghz network and if so, should I try to use that for the various wifi clients?
Does anyone know if I can somehow use Apple products to extend the reach of the Cisco DPC3925? Frustratingly the signal is quite strong (compared to Apple routers), but I cannot properly stream audio/video if that wifi network is used (as my iMac that hosts the content is on the Apple one... and I'd have to walk over to switch it to the Cisco one).
Any other tips would be much appreciated!
Cheers!
AK

I have an airport extreme and am trying to extend the range of the wireless network with an airport express. I set it up with the help of apple support, both lights are green on both airports, but the range didn't change. What could be wrong?

I am trying to extend the range of my wireless network by adding an airport express to an airport extreme. I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house. What could be the problem? Does weather affect the wireless network??

So, on the Extreme you checked the box to "allow this network to be extened" ?
Correct?
And on the Express, you set it up to "Extend a wireless network" ?
Correct?
See this Apple article and see if you missed anything...
http://support.apple.com/kb/HT4145
To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
Set up: Components of an extended network
➊ Primary Wi-Fi base station (this is the base station connected directly to the Internet)
➋ Extended base station
Configuring a wireless extended network
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.

Extend wireless network with multiple airport express and netgear powerline

I currently have the following network configuration:
1. Using ATT u-verse (2-wire 3800HGV-B "modem") to internet
2. Disabled the u-verse modem wireless router, and have connected an Apple Time Capsule wireless router (on a DMZ)
3. Have four Netgear XAVB5001 powerline adapters connected to the time capsule (for our iMac desktops and the Apple TV)
4. Have an Airport Express wirelessly connected to the time capsule to extend range (for our iPhones and iPad)
All this is currently working. What I would like to do is the following, keeping 1-3 above the same:
4. Connect the airport express to the time capsule via Netgear XAVB5101 powerline adapter (instead of wirelessly connecting to the time capsule as it is today) and use it to extend the wireless range of the time capsule
5. Add ANOTHER airport express to the time capsule via powerline adapter (and extend the wireless range elsewhere in the house).
Does anyone have any experience with this kind of setup and can assure that it would work? (I'm trying to decide whether to spring for a couple more powerline adapters and another airport express)
Thanks in advance!
Dave

I had a VERY similar problem: I was trying to extend my wireless network using a hardwired ethernet connection from Airport Extreme to my Time Capsule. Every time I plugged in the wire to the TC, everything disappeared. Unplugged, and boom. Came back.
Here's how I solved it:
Go into Airport Utility and select the unit you are trying to use as a wireless extender and choose to edit it. Then, on the wireless tab select CREATE a wireless network. But, give it the exact same name and password. This is completely counter-intuitive. You would think to choose EXTEND, but this would be wrong. Next choose the network tab. And, select Router mode to Bridge (off).
By choosing the same name and password, your phone, laptop, etc. will think it's on the same network and move seamlessly from one to the other.
See if this fixes your issue. Fixed mine instantly. AND, it only took 3 painstaking hours of checking ethernet connections and rewiring jacks, etc. to figure it out. LOL

Can I extend my Sky wireless signal with an AirPort Express?

Similar Messages

Maybe you are looking for