Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

Similar Messages

Can't install Adobe Reader using Firefox on Windows Server 2008 R2

I am hoping someone can kindly help me out here.
Using Firefox I went to http://get.adobe.com/reader/ and clicked the download button and received the Getplus add-on to Firefox.
When Firefox restarts the getplus window opens but sits there and does nothing with the window remaining blank for ever..
Each time I try it is the same
I am logged into Windows Server 2008 R2 as Administrator but it might be a permissions problem as this is a new install of 2008 and seems pretty locked down.
Thank you in advance

Are these signs of Adobe failing?
After subscribing to this forum, I received an email in German from Adobe......................
Vielen Dank für Ihren Beitritt im Adobe-Club. Als Mitglied können Sie eine Reihe exklusiver Vorteile, Ressourcen und Dienstleistungen in Anspruch nehmen.
Mitglieder können:
* unseren Newsletter Adobe Minute Mail (deutsch) abonnieren
* unseren Newsletter Adobe Edge (englisch) abonnieren
* Informationen zu ihren Käufen und Transaktionen im Adobe Store aufrufen
* ihr Adobe-Profil verwalten und aktualisieren
* in der Adobe Exchange Dateien hoch- und herunterladen
* Nachrichten in den Adobe-Foren veröffentlichen
Ihre Adobe-Club-ID lautet
Um Ihr Adobe-Profil und Ihre Voreinstellungen zu ändern oder um Adobe Edge zu abonnieren, loggen Sie sich einfach ein.
Whatever, Adobe

I can't install service pack 1 for my Windows server 2008 R2

I found an error inside the log as amd64_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.17514_none_04709031736ac277\lsass.exe [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
Where can I find that file ? Any suggestion ?

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Unable to Install JRUN 4 Updater 7 on windows server 2008 64 bit machine

Please help us on the error while installing jrun4, updater 7 on Microsoft Windows Server 2008 R2 Enterprise 64 bit operating system
The JVM installed on the machine is 32 bit.
I installed jrun on the machine successfully. When I try to add a web server using the web server configuration tool.
I get the below fatal windows error.
Windows package manager
Operation failed with 0x8007000B
An attempt was made to load a program with an incorrect format.
Please help....

Hi Charlie,
64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
I hope this was helpful.

To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

Dear Sir,
Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
Thanks

Hi,
1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself). If you want you may configure these two settings via group policy setting instead. The path of the
group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
-TP

Install Active Directory Domain Controller on Windows server 2008 enterprise, dont login on Sql Server 2008 R2

I install Active Directory Domain Controller on Windows server 2008 enterprise and dont login on Sql Server 2008 R2. Before install ADDC, I have logon SQL Server 2008r2 Success, After when i install ADDC is don't logon on SQL Server 2008r2 -->not success.
I have uninstalled ADDC but i still can't login on SQL server 2008r2.
please help me. it is very very disaster!
I think is loss account SQL server 2008r2!

Hello,
I stronly recommend you post the detail error message to us while you try to connect to SQL Server instance, it's useful for us to do further investigation.
Microsoft recommends that you do not install SQL Server 2008 R2 on a domain controller, there are some limitations:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
After SQL Server is installed on a computer, you cannot change the computer from a domain member to a domain controller. You must uninstall SQL Server before you change the host computer to a domain controller.
After SQL Server is installed on a computer, you cannot change the computer from a domain controller to a domain member. You must uninstall SQL Server before you change the host computer to a domain member.
SQL Server failover cluster instances are not supported where cluster nodes are domain controllers.
SQL Server Setup cannot create security groups or provision SQL Server service accounts on a read-only domain controller. In this scenario, Setup will fail.
On Windows Server 2003, SQL Server services can run under a domain account or a local system account.
So, I would suggest you try to open up Windows Services list and changed the account for SQL Server service.
Regards,
Elvis Long
TechNet Community Support

Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008

Hi there,
Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
I had bunch of questions also asked in this Oracle forum like :
Step by Step PeopleSoft HRMS Installation from scratch.
Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
Hope it helps to newbie's in PeopleSoft Apps like me.
Regards,
Vishal Mody
Edited by: 897150 on Jan 25, 2012 10:11 AM
Edited by: 897150 on Jan 25, 2012 10:13 AM

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

Can't upgrade Windows Server 2008 R2 Enterprise to Windows Server 2012 R2 Standard

Even though the "Windows Server Installation and Upgrade" TechNet article (DN627667) claims that I can upgrade Windows Server 2008 R2 SP1 to Windows Server 2012 R2 Standard, it seems I can't. I get an error message saying "Windows 2008
R2 Enterprise cannot be upgraded to Windows Server 2012 R2 Standard (Server Core Installation). You can choose to install a new copy of Windows..." What might be causing this issue? Thanks for any input! :)

Hi,
Firstly, for retail versions, Windows Server 2008 R2 Enterprise with SP1 can be upgraded to Windows Server 2012 R2 Standard/Datacenter.
I assume you are running Windows Server 2008 R2 retail version, right?
In addition, it seems that in earlier version than Windows Server 2012,
once you install the server in Core or with GUI mode, you could not switch to the other. The only option was to rebuild the server from scratch.
Did you install Windows Server 2008 R2 in GUI? If yes, I recommend you to upgrade it to Windows Server 2012 R2 in GUI
mode to see if the issue persists. If it succeed and you want to run in server core, you can just remove the graphical shell and convert your Windows Server 2012 R2 to Server Core.
Best regards,
Susie
Thanks for replying Susie. The 2008 R2 software is the one provided by Microsoft for Action Pack subscribers, so I'm assuming it's not retail. That's another thing, I think I should be installing the GUI as my 2008 has a GUI, not just the server core. For some
reason I missed that and clicked on the server core only install!

AD Management Gateway Service for Windows Server 2008 SP2

Hey,
I'm having the same issue as in this thread.
https://social.technet.microsoft.com/forums/windowsserver/en-US/93be1866-8aa8-4004-be95-113b7a4faef2/ad-management-gateway-service-for-windows-server-2008-sp2
And trying to follow the 5 step procedure listed in the 3rd post, but am stuck on step 5, getting the hotfix from Microsoft. The link posted from the Hotfix page is just a generic Microsoft Support page. Which is not helpful. How do I actually contact them
(phone # or email address) to get the software?
Thanks In Advance,

No luck. I've tried the chat which asks which Windows version Im using and there's no Server 2008 only desktop versions. I called and after talking with 3 people I got cut off. There has to be an easier way to get a simple file downloaded.
You can hire me to do it for you. I am always successful at contacting MS Support.
You didn't follow the instructions I posted.
Reach us over the phone at 1-800-642-7676 (TTY: 1-800-892-5234)
http://smallbusiness.support.microsoft.com/en-us/contact/
Click Technical Support for Chat.
GREAT BIG BLUE BUTTON SAYS "Technical Support" - CLICK IT AND SELECT WINDOWS SERVER AT THE BOTTOM OF THE LIST.
It is really that easy.
¯\_(ツ)_/¯

Error coming while installing Cisco Prime 4.2 on Windows Server 2008 R2

Hi,
I'm trying to install Cisco Prime 4.2 on Windows Server 2008 R2. While initiating the installation, message box "Error: csv not found" appears, and the installation terminates.
Is there any csv template need to be copied at any location before hand?

Are you installaing LMS 4.2.4 directly ?
Looking at the error ,it looks like ...
If yes then you need to follow the below path:
The installation path of LMS 4.2.4 : LMS 4.2 > LMS 4.2.2 > LMS 4.2.4
Thanks-
Afroz
[Do rate the useful post]

Unable to install the security patches KB2677070 in Windows Server 2008 R2 SP1 (The update is not applicable to your computer)

Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
Users

Hi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang

Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA

Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!

> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus

Can I install Solution Manager on Netweaver 04?

Hi,
I am very new to the Basis world. I'm trying to learn installations and figure out where SAP components can be installed.
I have just recently installed a Netweaver 04 environment with the SAP Abap instance (Basis 6.40). Is it possible to now install Solution Manager on it or is solution manager 3.2 only compatible with Web App server 6.20?
Any explanation as to Solution Manager installation from scratch will be helpful.
Thank you
Amina

hi amina
rite now solution manager and netweaver can be integrated with solution manager diagnostics there is procedure
the following link will help u to learn more about it
https://websmp201.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000634682&
note: award helpful answers
regards
janak mehta

HOW TO INSTALL ODI 11g / OWB 11g IN WINDOWS SERVER 2008 R2 (64 BITS)

Hi everybody,
I have a serious problem.
Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
Thanks & Regards!

OWB 11G Will have been installed with the database, it now ships with 11G.
Check you are on a supported platform for design centre using the certification matrix.
Quick google search for you regards 0xc0000018 :
Problem in Lunching OWB Design Center

Error Starting Service Manager 2007B patch 10 Windows Server 2008 64 bit

Hi All,
I am trying to do a new installation of SAP Business One 2007B patch level 10 with a operating system of Windows Server 2008 64 bit and SQL Server 2008. Installation of Server, Server Tools and Client sucessfully happened without any errors but when I am trying to open the service Manager its giving me an error as ServiceManager.exe has stopped Working and when I click on view problem details the follwoing is the error details :
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     ServerManager.exe
Application Version:     0.0.0.0
Application Timestamp:     49af579d
Fault Module Name:     B1iEventSender.dll
Fault Module Version:     0.0.0.0
Fault Module Timestamp:     49af5783
Exception Code:     c0000005
Exception Offset:     00033482
OS Version:     6.0.6002.2.2.0.274.10
Locale ID:     1033
Additional Information 1:     fd00
Additional Information 2:     ea6f5fe8924aaa756324d57f87834160
Additional Information 3:     fd00
Additional Information 4:     ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
I tried to reinstall the Server Tools but still the problem remains the same.
Can you please advise whaty might be the mistake or problem from my end.
Regards,
Venkat

Hi,
Modify license server from add/remove program but do not check the B1i event sender in the select feature.
Probably, the B1i event ender is not installed correctly.
Rgds,
JimM

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Similar Messages

Maybe you are looking for