Can I load gMax files using Java3D?

Can I load gMax files using Java3D?
I need to know this if I am going to use Java for my project.

What format are the files in? Can you export as .3ds? If you can, there are loaders for these files.
There are also loaders available for VRML, Obj, etc - see what you can export the file as.

Similar Messages

  • Can I load xml file from SWC without using @embed

    I'm developing a mobile application in which I need to load xml files from File.applicationDirectory. This works great if the xml files are part of the main application swf. But I would like to move these xml files into a SWC so they could be shared across multiple applications.
    Using FlashBuilder 4.5, when a SWC is built, I can specify files to embed in the library that are not assets (Assets Tab of Flex Library Build Path). For various design reasons, I do NOT want to embed the xml files via @embed.
    When the swc is built and I open it up using a zip utility, I see the xml files in there just fine. So they are being bundled with the SWC. But how can I load these files in my main application that does not involve using @embed? When the main application is built, the swc setting for link type is "merged into code".
    I wouldn't expect the application to automatically pull out the xml files from the swc and place them in the File.applicationDirectory on the mobile device. I've tried loading from there just in case but file.exists is false (as expected).
    I've searched the web (and continue to do so) and all the answers seem to be to use @embed. Is there another way?
    Randy

    It's actually a lot easier than you think.
    Just reference the file like any'ol URL using a path relative to the SWC's src directory.
    So if you include the file "assets/xml/some.xml", just use that same string like you would any remote resource.
    For example:
    var loader:URLLoader = new URLLoader( new URLRequest("assets/xml/some.xml"));
    I believe it would also work like this "/assets/xml/some.xml", but I prefer relative paths so the link doesnt break if moved out of the SWC...

  • Firefox cannot be closed; the following message appears: "Can't load resource file, can not run". How to solve this problem; I am using Windows XP SP3

    Whwn I want to close Firefox 9.x , a pop-up appears with the message: "Can't load resource file ......" . First I have to close this pop-up, then Firefox is closed. Also with other versions of Firefox I had this problem.

    i deleted the rdf and now the first window only (and any tabs in it) are maximised. i found this in the rdf
    <RDF:Description RDF:about="chrome://browser/content/browser.xul#main-window"
    screenX="4"
    screenY="4"
    width="1008"
    height="461"
    sizemode="Normal" />
    i tried changing normal to maximised; no effect. either i need also to change the numbers (to match a maximised window) or ff ignores this. i want to be able to open different sites in different windows, and not have to maximise them manually. ff never used to be broken, why break this? what possible security flaw was fixed by screwing up ff to never open maximised unless u hack it or delete certain config files?

  • I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

    I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Can I load several files in parallel through one file infopackage?

    Can I load several files in parallel through file datasource?

    Hi Alex
    I am sorry but am not able to understand your requirements completely.
    If you are using BSP then how come infopackage comes in picture?
    As through a BSP application you can load the data with the help of fundtion modules. In your case first load the data from file to internal table through function GUI_UPLOAD and then from internal table to ODS through function module RSDRI_ODSO_MODIFY.
    Do not forget to assign points if this helps
    Regards,
    Monika Birdi

  • Can't load Raw files into Lightroom 3 form my Nikon D7100

    Can't load Raw files into Lightroom 3 form my Nikon D7100... Why?

    TGTruman wrote:
    How do I convert the Nef to DNG files...
    Download the Adobe DNG Converter (and install it, and run it...).
    Note: an internet search will reveal a link in short order.
    TGTruman wrote:
    I don't mind going to LR5, just don't want to spend the money and then not have it work...
    So use the trial first. No?
    R

  • Load multiple files using the same data load location

    has anybody tried loading multiple files using the same load locations. I need to do this as the data in these multiple files will need to be exported from FDM as a single export file. the problem i am facing is more user related. since these files will be received at different points of time, users will need a way to tell them what has been loaded and what is yet to be loaded.
    is it possible to throw a window on the web broser with OK and Cancel buttons from an event script?
    any pointers to possible solutions will be helpful

    was able to resolve this. the implementation method is as follows
    take a back up of previously imported data in the befcleardata event script. then in the beffileimport event append the data to the import file. there are many other intricacies but this is the broad implementation logic. it allowed my users to load multiple files without worrying about append or replace import type choices

  • Can I open raw files using photoshop elements

    Can I open raw files using photoshop elements

    Yes, depending on the Camera Model and version of PSE.
    All camera makers like to make slight changes to the RAW format for their new models. Adobe then take a few months to produce a camera RAW plug-in to process the new format.
    Give you PSE version and camera model and we could be more help.
    Brian

  • I can not load RAW files from my nikon d810

    I Have a problem Reading RAW files from my nikon d810

    Thanks,
    Joop
    Op 26 jul. 2014 om 17:40 heeft Rikk Flohr <[email protected]> het volgende geschreven:
    I can not load RAW files from my nikon d810
    created by Rikk Flohr in Photoshop Lightroom - View the full discussion
    https://forums.adobe.com/search.jspa?q=D810
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6585986#6585986
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I am  unable to load GRAPHIC files using the transaction SFP.

    I am  unable to load GRAPHIC files using the transaction SFP.
    The error message says that there is no connection to the below given url.
       http://<hostname:8000>/sap/bc/fp/
    is it something like i have to activate this service in transaction sicf ?

    Try http://<hostname:8000>/sap/bc/fp/!
    ! at the end ..
    Regards
    Juan

  • Can't read text file using UTL_FILE

    Hi All,
    how can I read notepad file using UTL_FILE package.I have specified the UTL_FILE_DIR in the init.ora file.My objective is to when a button is clicked, the contents of the file will display in a text item.Here is my code written in WHEN_BUTTON_PRESSED trigger.
    DECLARE
         file_handle UTL_FILE.FILE_TYPE;
    data_line Varchar2(100);
    BEGIN
         file_handle := UTL_FILE.FOPEN('E:\vimal','abc.txt','R');
              message('directory created');
         UTL_FILE.GET_LINE(file_handle, data_line);
         :block2.t1 := data_line;
         UTL_FILE.FCLOSE(file_handle);
    END;

    Why don't you use text_io? Don't forget that UTL_FILE is reading directories from the database point of view. The E drive for the database is a different E then on your client pc. I presume your database is on a different computer. Are you getting any errors?

  • Can't load m4v files into Photoshop

    I created a H264 Blu-ray (m4v) using Adobe Premiere Pro CS4. It was a exported as 1080i file. I tried to load this file into Photoshop CS4 extended. Photoshop says that it "could not complete your request because the movie file could not be opened". Can anyone help as it is important to me to apply some Photoshop to fix overexposure which it does superbly to a Quick Time (720*480) file. I want to do the same for 1080i file.
    Thx
    Sundar

    I initially captured the clip as .MTS in 1080. Using premiere CS4, I exported part of the clip as H264 Blu-Ray (m4v). If I try QT as output format, it is of lower resolution. You are right that Photoshop does not have problem in pulling in QT clips.
    You answered your own question. H.264 BluRay is a multiplexed sub-format of H.264 which is not compatible with QT's implementation of H.264. If you want to use H.264, you must export normal H.264 and the profile level must be set to 3.1, basic in the exporter. Then, after export, you simply rename the file to *.mov. That aside, you can always use alternate Quicktime CoDecs like PNG or PhotoJPEG and directly export to a MOV. Your loss in quality is due to incorrect field settings, so that needs to be set properly. It merely doesn't affect your H.264 output, because there everything is set correctly already in the presets.
    Mylenium

  • Loading accdb file using for each loop in to single target table

    I have 3 accdb file as below in single folder, in control flow I have created a for each loop to loop through all the below file.  In dataflow task I have created oledb source using connection manager to point to first file a1.accdb. I am trying
    to load all the file into single below mentioned target table, here It is only loading first file it is not looping through other two file.
    This I have tried to load .txt files and csv files it is working perfectly but similarly when I try to load access db file table it is not working, can any one of you help me?
    1. a1.accdb contains only one table  a1tab ( col1 col2 col3 )  
    2. a2.accdb  contains only one table  a2tab  ( col1 col2 col3 )
    3. a3.accdb  contains only one table  a3tab   ( col1 col2 col3 )
    I have a target table with similar structure as source
    Target table <TargetTable> Col1 Col2 Col3
    aak

    Thanks Arthur, please find below response
    How do you handle the different table names?  Cant we handle it in a similar manner, how we handle the .csv/.txt files with different name and similar structure for sources(multiple files) and target (single table)
    Is it good to drop the idea of for each loop and create a separate task for each accdb file? to be loaded to same target table( performance wise etc.. any justification would be helpful)
    You must handle the connection string dynamically?
    Can you help me with the logic for handling connection string dynamically
    aak

  • Loading xml file using owb

    Hi Gurus,
    I am new to owb and as per requirement we need to load xml files into oracle table using owb.
    below is the xml file:
    <bookstore>
    <book category="COOKING">
    <title lang="en">Everyday Italian</title>
    <author>Giada De Laurentiis</author>
    <year>2005</year>
    <price>30.00</price>
    </book>
    <book category="CHILDREN">
    <title lang="en">Harry Potter</title>
    <author>J K. Rowling</author>
    <year>2005</year>
    <price>29.99</price>
    </book>
    <book category="WEB">
    <title lang="en">Learning XML</title>
    <author>Erik T. Ray</author>
    <year>2003</year>
    <price>39.95</price>
    </book>
    </bookstore>
    please help me in loading above xml file using owb.

    You can leverage the XML SQL functions to extract from XML using the database, see the blog post below;
    https://blogs.oracle.com/warehousebuilder/entry/leveraging_xdb
    For example to extract information from your XML document the following SQL can be generated from OWB;
    select extractValue(value(s), '/book/author'),
    extractValue(value(s), '/book/year'),
    extractValue(value(s), '/book/price') from
    ( select XMLType('<bookstore>
    +<book category="COOKING">+
    +<title lang="en">Everyday Italian</title>+
    +<author>Giada De Laurentiis</author>+
    +<year>2005</year>+
    +<price>30.00</price>+
    +</book>+
    +<book category="CHILDREN">+
    +<title lang="en">Harry Potter</title>+
    +<author>J K. Rowling</author>+
    +<year>2005</year>+
    +<price>29.99</price>+
    +</book>+
    +<book category="WEB">+
    +<title lang="en">Learning XML</title>+
    +<author>Erik T. Ray</author>+
    +<year>2003</year>+
    +<price>39.95</price>+
    +</book>+
    +</bookstore>') adoc from dual+) r,
    table(XMLSequence(extract(r.adoc, '/bookstore/book'))) s;
    Cheers
    David

  • Problem loading XML-file using SQL*Loader

    Hello,
    I'm using 9.2 and tryin to load a XML-file using SQL*Loader.
    Loader control-file:
    LOAD DATA
    INFILE *
    INTO TABLE BATCH_TABLE TRUNCATE
    FIELDS TERMINATED BY ','
    FILENAME char(255),
    XML_DATA LOBFILE (FILENAME) TERMINATED BY EOF
    BEGINDATA
    data.xml
    The BATCH_TABLE is created as:
    CREATE TABLE BATCH_TABLE (
    FILENAME VARCHAR2 (50),
    XML_DATA SYS.XMLTYPE ) ;
    And the data.xml contains the following lines:
    <?xml version="2.0" encoding="UTF-8"?>
    <!DOCTYPE databatch SYSTEM "databatch.dtd">
    <batch>
    <record>
    <data>
    <type>10</type>
    </data>
    </record>
    <record>
    <data>
    <type>20</type>
    </data>
    </record>
    </batch>
    However, the sqlldr gives me an error:
    Record 1: Rejected - Error on table BATCH_TABLE, column XML_DATA.
    ORA-21700: object does not exist or is marked for delete
    ORA-06512: at "SYS.XMLTYPE", line 0
    ORA-06512: at line 1
    If I remove the first two lines
    "<?xml version="2.0" encoding="UTF-8"?>"
    and
    "<!DOCTYPE databatch SYSTEM "databatch.dtd">"
    from data.xml everything works, and the contentents of data.xml are loaded into the table.
    Any idea what I'm missing here? Likely the problem is with special characters.
    Thanks in advance,

    I'm able to load your file just by removing the second line <!DOCTYPE databatch SYSTEM "databatch.dtd">. I dont have your dtd file, so skipped that line. Can you check if it's problem with ur DTD?

Maybe you are looking for