Can I lock an Essbase database for a particular period?

Hi Everyone,
I was thinking about the ways in which this can be done. Any simple ways to achieve this? Please do post your suggestions. Periods would be defined by Years or a combination of Years and Periods.
Thanks,
Sayantan

Hi John,
That seems to be the only way to do it! The requirement was mainly for Actual data load. I created a special user, granted it Viewer and Analytic Server write access in Planning module, Server access for Essbase and configured it as a planning as well as Essbase user. During refresh, the filter was automatically created in Essbase. A MAXL script is called before the Actual data load that modifies the definition of the filter through a substitution variable. I am using this user account for all the actual data loads.
Thanks,
Sayantan

Similar Messages

Every time I visit a certain website, I have to magnify it. Thats great and all but whenever I return back it has reset. Can I "Lock in" a zoom for a particular website forever?

Please see question.

OK, I have checked all other settings, and they are OK.
Now, after more testing, I have found they exact same symptoms.
It seems that if it is the 1st time to use FF and/or 1st time to visit any site it just sits there accessing the hard drive.
I may have to figure out (somehow) EXACTLY what it is accessing/writing/reading at that moment. Tried Process Monitor (from SysInternals) and it is kinda cryptic in the data department. BUT, shall let it monitor next time I first start to use FF for the day and see what it picks up in its log.
MAYBE if I am lucky I will see something that sounds an alarm bell for me.
I can only hope. Of course, then would come the "fun" part...remedy for the problem. :)

Can we have a common database for TARGER and CATALOG in RMAN?

Hi,
Can we have a common database for TARGER and CATALOG in RMAN?
I am trying to duplicate a auxilary database using rman. In this situation can i have common db for target and catalog?
Please suggest.
Thanks
Naveen.

You just won't use a CATALOG database.
Check Creating a Duplicate Database with RMAN for the full process.

I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system i

I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help..

Thank you for your reply. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help.

How can i find the exact BADI For a Particular Transaction

hi ppl,
How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

Use this code:
*& Report ZGET_BADI
REPORT ZGET_BADI.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
*Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
*For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Regards
Vinayak

Can we change the organisational unit for a particular position?

Hi Friends,
Can we change the org.unit for a particular position?What is the procedure?
Thank you very much..
Sai

Hi sai,
I m not getting your question, Can u pls elaborate this one.
This thread has been marked as answered, u can start a new thread for the same.
Regards,
Tomesh
Message was edited by:
Tomesh Sahu

Why does Itunes say it can't find the original file for a particular song?

why does Itunes say it can't find the original file for a particular song? and then asks if I want to locate it? I can't access a bunch of old song files. any new cds are available to me in itunes. all others are not accessible. how do i merge the new cd's with the old ones so that all the songs are playable in Itunes. thanks.

sheri 0713 wrote:
Of course, I have backed up to CD and/or external drive.
I'm wondering if you're attempting to maintain your library on your external HDD? If iTunes has been directed to use a location on your external hard drive as your iTunes Music Folder location (you can check this in iTunes > Preferences > Advanced tab) you MUST ensure that the hard drive is connected to the computer and mounted in the Finder prior to launching iTunes. If it isn't, it can cause this error to appear. This is probably one of the most common reasons this error begins to appear.
It seemed my purchased songs were the first to DISAPPEAR and I had to rebuy.(Nice scam in the bug?)
So... why not restore them from your backup? If, for some reason, this wasn't an option, you could have also recovered them from any iPod or iPhone they were currently synced to (http://support.apple.com/kb/HT1848), or, you can also email iTunes Store support and request a "regrant," which is a once-per-account exception they might be able to offer you and allow you to download missing purchases again.
I am now convinced this a HUGE BUG in 7.7.1. and possibly the previous version or two.
I'm not so sure... I've never run across this particular error (my library is stored on my internal hard drive, but copied to an external for backup purposes with an application other than iTunes or Finder. I don't think Apple will provide acknowledgment to issues experienced only by very small numbers of people... I'm one of those, perhaps foolish, individuals who allows my computer to download updates immediately, rather than waiting for fear of problems, and again, I've never had this error.
CG

Report of Balance GRs for a particular period.

Dear Gurus,,
How can I generate a report of balance/pending GRs for a particular period for invoice parking.i.e Materials recd.,GR prepared but Invoice is not recd.or parked againest such GRs.
Thanks

Hi
Try with ME2N or ME2M or ME2L with selection parameter RECHNUNG - open invoice.
Thanks/karthik

How to find expense and revenue of a company code for a particular period

Hi Gurus,
I am new to FI. I need to find out the revenue, expense and gross profit of a company code for a particular period.
for eg: I need to find the revenue, expense and GP of a comapany code 'ZYZM' for the month of july. Is there
any standard report for this or any way to see P&L statement for this period?
Thanks and regards,
Ashish Kumar

Hi Ashish
You can use report S_PL0_86000030 - G/L Account Balances (New) for the period wise report.
You can select as Mani mention P&L account statement type as X in dynamic selection and give the period for which you require the balance.
The report will give you the three balances
Opening
Till previous period
for the period
Hope this report will help you.
Regards
Pankaj P

How do we calculate Accumulated Depreciation for a Particular Period

Dear Members,
How do we calculate the Accumulated Depreciation for a particular asset. It would be great if some body can explain me ,what tables should we use.
I read that Accumulated Depreciation is nothing but deprn_reserve column in fa_deprn_summary table. I have to make a report which should show the accumulated depreciation for an asset by period name. (eg : For MAY-07 the report should give the accumulated depreciation for that asset).
Please give your suggestions.
Thanks
sandeep

Hi,
You can use DEPRN_RESERVE from fa_deprn_summary to get accumulated deprn. Make sure you select the latest row from fa_deprn_summary for a particular period.
Use FA_DEPRN_PERIODS to join with period_counter if you wnat to use Period Name as criteria.
Cheers
Sunil Chawla

How to increase or Decrease Budget for a Particular Period

Hello All,
Can some tell me how to increase/decrease fund for a particular period.

You can pass the manual entry & ensure to choose the balance type to budget
To increase the balance for a specific period- Input the balance to debit side
To decrease the balance for a specific period- Input the balance to credit side
No need to balance the debit & credit totals for budget journals.

Configuring syslog and generating logs for a particular period.

Hi...
I have configured syslog server and the loggin enabled on ASA device... I want to generate the complete logs for a particular period of time. How can I generate this report.. Please help me

Hello,
I have an idea how it might work, but it is not certainly the best solution so if you will not find any other, this might work for you.
Enable sending logs to syslog server:
logging source-interface loopback
logging
configure EEM script to run "show log" periodicaly:
event manager applet test
event timer watchdog name test_name time 60 ! in seconds -> every minute
action 1.0 cli command "show log"
Best Regards
Please rate all helpful posts and close solved questions

WIP QTY. AND VALUE IN SINGLE REPORT FOR A PARTICULAR PERIOD

Is there any report for a particular period that we can get the WIP qty. and value in single report. If there what the fileds we have to select.
Ex. We want what is the consumption qty. and value and what is the GR qty. and value for the period ending June 08.

Hi,
You can use the T-Code KKAS to get the WIP Qty against a given plant/material combination.
some of the other supporting t-codes are:
KKAO                 WIP Calc.: Collective Processing
KKAQ                 Display WIP - Collective Processing
KKAT                 WIP Display for Product Cost Coll.
KKAV                 WIP Calculation for Cost Object Hier
KKAW                 WIP Display Cost Object Hierarchy
KKAX                 WIP Calculation for Order
KKAY                 WIP Display for Order
Regards,
JLN

Report for analyse the sales realisation for a particular period

Hi guys,
Is there any report for analyse the sales realisation for a particular period.
thanks
murali

Able to find the solutin the report S_AHR_61016532 it self.

T Code for Project Stock for a particular period

I want to check my project stock for a particular period, is there any Standard T Code, if not how to find the solution. Please revert me the solution.
Thank you.

Hi
Please check the following Report
S_P00_07000140 - Inventory and Raw Material for Special Stock Report
To access the report, from the SAP Easy Access menu, choose Accounting >> Financial Accounting >> General Ledger >> Reporting >> Tax Reports >> Thailand >> Inventory and Raw Material for Special Stock Report
OR
please try to create a Query by using the following tables..
MSPR
MARA
MAKT
Tnx.
Abdul

Can I lock an Essbase database for a particular period?

Similar Messages

Maybe you are looking for