Can i plug printer into airport extreme while it is on

Can I plug a usb printer into airport extreme while it is on?

I cannot find airport in finder, don't know how to turn it off.
You will have to pull the power plug from the back of the AirPort Extreme to power it down. Wait a few seconds, then plug the cord back in.
Or, you can pulll the plug where the power supply plugs into the wall socket if that is easier.

Similar Messages

Can I plug my remote airport extreme into my ethernet to improve the signal of the wds network? If so which port do I use the lan or wan

My signal downstairs is pretty weak even though I can see it as part of my WDS, I have access to a hard wired internet connection downstairs should I plug in my secondary airport extreme direct to improve my wireless downstairs?

Hi Other
Unfortunately you cannot use a Graphite as a client to join a wifi network. Your best bet would be to get one of the game adapters such as the Linksys WGA54G which you can plug into the ethernet port on your Wii to bridge to a wireless network.
Regards...jeremy

Can no longer print via AirPort Extreme

I am unable to print via my AirPort Extreme. I have a LaserJet 1320 that prints fine when directly connected to my MacBook Pro, but when plugged into the AE, it does not. I am able to see and add the printer via Bonjour, but when a document is sent to the printer an exclamation mark shows up over the printer icon and the queue stops.
When I run Network Diagnostics the following message results:
Network Diagnostics was able to connect to the Internet but not to the server "hp LaserJet 1320 series.pdl-datastream.tcp.local.". This could be caused by problems with the server, or an Internet problem between this computer and the server.
This printer was printing fine via AirPort up until about a week or two ago. Is this related to the recent AirPort update?
Apple (or somebody) please help!!!
MacBook Pro Mac OS X (10.4.9)

Anyone else noticing that this problem seems to be reoccurring. I've gone through the process of restarting the Aiport Extreme about once a month since I got it. Everything will be working fine, and then one day, it simply stops. Restarting the base station gets things back on track, for a while, at least.
Seems to me to be a firmware problem on the base station, since it's repeatable. Sad to see others are having the problem, but I'm glad I saw this thread since I had convinced myself it was the printer and was about to replace it ...

Will be renting a condo with an ethernet cord. Can I plug this into Airport Express and have wifi?

I will be renting a condo with an ethernet cord available. Can I simply plug this into my Airport express and have wifi for computers, iphone, and printer?

As long as the Ethernet cord leads to a router connected to the Internet, then yes, it will do all that.
What you want to do is the reason a lot of people bring an Airport Express with them on trips. They plug it into the hotel room Ethernet port and bam, their laptops and phones have wireless Internet.
If you don't already have a password on your Airport Express, now would be a good time to add one, especially if Internet usage is metered. Just to keep others from getting onto your network.

Can no longer print via Airport Extreme BS Network

I can no longer get my Samsung laser printer (ML-1210) to print via my Airport Extreme Base Station Network. All I get is the Printer Center telling me that it can't find the printer. Prior to OS X 10.4.4 and Airport Firmware update 5.7 no problems, after OS X 10.4.4 and Airport Firmware update 5.7 some types of documents (.pdf) would print sometime and some types (.rtd) wouldn't print at all. After OS X 10.4.5 nothing prints.
The printer is connected to the AEBS via an USB cable.
So far directly connecting my PB to the printer via an USB cable seems to print OK, as far as regular text files (Rich, and Plain) are concerned.

I tried so many things I'm dizzy. Nothing done to the computer, not even clean installing OS 10.4 on an external HD and booting from that worked. What seems to have finally worked (????) was reverting the AEBS Firmware version down to version 5.5.1.
Since I print so infrequently I'm not going to say it's all OK until I do some more testing/printing.
In the mean time if anyone can give me an specific idea why this conflict may be happening and what else I can do to fix it without running my AEBS with older Firmware I would be grateful.
The latest driver for Samaung ML-1210 is a couple of years old and I think it is a proprietary code (not something standard like PostScript).
I'm not sure if it's only the AEBS Firmware or a combination of conflicts between the "OS Version-Printer Driver-AEBS Firmware".
Thanks.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

G4 to Mac Pro transfer info, files both plugged into Airport Extreme

How can I transfer info, files from G4 to Mac Pro both plugged into Airport Extreme (to cable modem) with Ethernet cables. Both computers have no wireless cards and are in different rooms. I tried Target Disk mode but I can't find a long 400-800 Firewire cable or extension for it! (Local Apple store does not even stock a 800 Firewire cable!!) Since both computers are plugged into Airport Extreme there should be an easy way to get info and files from my old G4 to new Mac Pro which I can't figure out. Network, Sharing, boy is this complicated! I tried Migration ***., could not even get e-mail info right.
My Mac Pro can receive e-mail but not send! They come to me for help with their Macs but I now need
step by step instructions to set up the above. Thank you for your patience and any input.
W.W.

How can I transfer info, files from G4 to Mac Pro both plugged into Airport Extreme (to cable modem) with Ethernet cables. Both computers have no wireless cards and are in different rooms. I tried Target Disk mode but I can't find a long 400-800 Firewire cable or extension for it! (Local Apple store does not even stock a 800 Firewire cable!!) Since both computers are plugged into Airport Extreme there should be an easy way to get info and files from my old G4 to new Mac Pro which I can't figure out. Network, Sharing, boy is this complicated! I tried Migration ***., could not even get e-mail info right.
My Mac Pro can receive e-mail but not send! They come to me for help with their Macs but I now need
step by step instructions to set up the above. Thank you for your patience and any input.
W.W.

Can't print with Airport Extreme

I am having trouble printing with Airport Extreme.
My printer is connected to the AE but every time I try to print I get a printer offline message.
I have tried in the past to print wirelessly but have given up.
I just bought a new MacBook Pro so I thought I would give it another go.
Thank you.

Not very much to go on here but I'll give it a stab.
Go to the Airport Utility program located in Applications/Utilities folder.
Run this and select "manual setup" for your AE displayed on the left.
Hit the Printers icon on the top. Your shared printer should be displayed here. If it's not, then ensure it's powered on, good usb connection etc.
After this shows a usb printer connected then go to System Preferences>Print & Fax. You'll see printers you have setup before on the left. A green icon usually means they are available. If print doesn't work to the desired printer the best thing to do is remove the previous definitions by highlighting the printer and hitting the "-" icon.
Now hit the "+" sign and define the shared printer. It should be listed in the resulting "add Printer" dialog. Highlight, change any naming info and click "add".
Printer should now be available. I'm assuming a supported printer that have the device drivers loaded on your system.
That's all I got.

Problem setting up printer for AirPort Extreme wireless printing

I have an AirPort Extreme 802.11n and I've connected my Canon MP240 printer to it via USB. However, my MacBook Pro (running OS X 10.8.4) says the printer is "offline" when it is plugged into AirPort Extreme and turned on. When I try to add it as a new printer, it recognizes it as a "Nearby Printer" and asks me to download and install the software from Apple. It then searches for the software for about a minute and gives me this error message: "Can't install the software for the Canon MP240 series because it is not currently available from the Software Update server." I've tried directly downloading the drivers from Apple's website http://support.apple.com/kb/DL899 and from Canon's website http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp240#DriversAndSoftware but neither work.
HOWEVER, the strangest part is if I were to connect the printer to my MacBook Pro directly via USB, it recognizes the printer and I can print no problem. This leads me to believe the drivers have already been installed onto my computer. If anyone knows how to get around this issue I'd greatly appreciate the help.

Hi biyyadiii,
If you are having issues setting up your printer via your Airprot Extreme, you may find the following article helpful:
Apple Support: USB printer troubleshooting for AirPort Express, AirPort Extreme, and AirPort Time Capsule
http://support.apple.com/kb/TS1253
Cheers,
- Brenden

Can Time Capsule backup an Airport Extreme's attached USB hard drive?

Can Time Capsule backup an Airport Extreme's attached USB hard drive (without currently being attached to a MAC OSX LION system)?

No, sorry.. there is no way for the TC to see the files.. and even if you plug the hard disk into the TC there is no mechanism in the TC to drag the files to itself.. The TC is absolutely a dumb network attached drive.. everything you want to do must be done from a computer.

Connecting printer to Airport extreme via Ethernet

I have just setup a wireless home network using Airport extreme. My desktop windows xp pc does not have a wireless connection and is connected to the internet by ethernet directly pluged in to the DSL modem.
My Canon printer is connected to the Airport's USB port.
Is there a way I can connect the desktop pc to the printer via the Airport's Ethernet connection?
I appreciate any help, herb

Welcome to the discussions forum Herb.
I have just setup a wireless home network using Airport extreme.
From what you described, you're not done yet.
As I understand it, you're using your MacBook Pro to print to the Canon wirelessly through the Airport Extreme, but your Windows computer can't do that since it has no wireless card. Furthermore, you can't use your MacBook Pro to get on the internet when your DSL modem is connected directly to your PC. Is that right?
The right way to do things is to connect the DSL modem to the *Airport Extreme*, not a computer. Since your PC isn't wireless, its Ethernet port ought to be connected to the Airport's LAN port, and not directly to the DSL modem.
To reconfigure your equipment the right way, do the following:
1. Power down your Windows computer.
2. Unplug the DSL modem.
3. Unplug the Airport Extreme.
4. Power down all your other equipment too, for good measure.
5. Unplug the Windows computer from the DSL modem, and connect it to a LAN port on the Airport Extreme.
6. Using another Ethernet cable, connect the Airport Extreme's WAN port to the DSL modem.
7. Plug in the DSL modem. Wait a few moments for it to complete its power up sequence. Some take longer than others.
8. Plug in the Airport Extreme. After a few moments, its LED should glow steady green, meaning it's communicating with the DSL modem.
If the light blinks amber and never turns green, that means you'll have to reconfigure the Airport using Airport Utility. Not a problem, but if that happens you ought to write back for more help.
9. Boot your computers and the printer. The order isn't important.
Now, check to make sure you can communicate with everything the way you have been used to doing:
1. Log in to your Windows computer and make sure you can load a web page.
2. Log in to your MacBook and make sure you can still print to the Canon.
3. Make sure you can load a web page with your MacBook Pro.
4. Finally, you ought to be able to print with your PC as you're accustomed to. If you can't, you will need to "add a printer" in Windows so it can find the Canon again.
Good luck.

How do I install an HP C4100 printer to airport extreme?

I can connect my C4100 via USB directly to my laptop, but I don't know how to install it to airport extreme. When I attempt to print using airport extreme, I get a connection failure. Can you provide instructions? (I am a new MAC user).
Thanks.

Hi there,
this morning I resolved the printing issue with my HP psc 1217 All in one.
I was almost ready to go into the next computer store to buy a airport compliant device when I found this link for more than 600 printer drivers:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
My psc 1217 is not directly listed, but works well with the drivert for the 1210 device.
the photosmart C4100 is also listed so it should work as well.
What you have to do is:
go to the page: http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
1. download the package: Foomatic-RIP (88k) and install
2. download the package: espgs-7.07.1.ppc.dmg (5.4MB) and install
3. download the package: hpijs-2.7.6.U.dmg and install
go to the printer manager and select the driver from the list you will see a bunch of newly installed printers.- Works well for me and allows me to keep my loved psc1217.
Cheers,
Torsten

Can I use an old Airport Extreme as an extender with a new Airport Express

Hi All, I have Verizon Fios and the data line runs into my bedroom. I purchased a new Airport Express today to replace the Airport Extreme (from 2006). Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there). I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible? If so, how do I set it up?

Can I use the old Airport Extreme as an extender
Is this the "round" or "dome" shaped AirPort Extreme?
If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do.

I can not set up my airport extreme, he's worked over the internet but I can not back up

I can not set up my airport extreme, he's worked over the internet but I can not back up

''donngra [[#answer-685379|said]]''
<blockquote>
''FredMcD [[#answer-685331|said]]''
<blockquote>
Your System Details shows;
Installed Plug-ins
Shockwave Flash 15.0 r0
Shockwave Flash 11.5 r502
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''v16.0.0.296<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
Shockwave Director '''v12.1.6.156 http://get.adobe.com/shockwave/'''
</blockquote>
</blockquote>

Can I Set-up new airport Extreme w/PC?

I know the old APs you could not setup with a PC...can you with the new Airport Extremes? My wifes office is looking at routers and I am pushing this one but they are worried if her Mac is not in the office they would have no way of changing settings etc.
So are they out of luck or is there some official (or hacky?) way of setting up and/or changing the new AP Extreme with windows?
Also I assume print sharing works with PCs over the Airport network right?

I know the old APs you could not setup with a PC...
Not true. The round 802.11b/g AirPort Extreme base station (AEBS) and AirPort Express (AX) could be configured from Windows using the Windows version of the "AirPort Admin Utility".
...can you with the new Airport Extremes?
Yes you can configure the new square 802.11n AEBS using Windows. The Windows version of the "AirPort Utility" is on the disc shipped with the AEBS.

Can i plug printer into airport extreme while it is on

Similar Messages

Maybe you are looking for