Can I print VI names along with the icons in the hierarchy print?

When printing the documentation a diagram of the VI hierarchy prints. Is there a way to get each of the VIs to have it's name or path printed in this diagram?

Try using VI Server to list the VI's in memory, and their paths.
I assume you are doing this to list the contents of a project. The above method will give you a list of all VIs in memory, so all you have to do is run it while your project (exclusively) is open. You will have to be sure you know which VIs belong to this tool so you can subtract them out by checking the status.
There is probably an easier way, though I am not sure if the SCC module allows printing of the contents of a project. I know that other Source Code Control programs do allow this. Anyway, if you were to enter your project into a SCC program, you would be able to monitor and follow the contents of the project, and not have to worry about things like this.
Good luck.

Similar Messages

What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

Dear All,
Revision: 11.5.10.2
We have a case where some of the orders we have created have incorrect customer name along with incorrect Bill To Ship To.
All these orders are booked. And their Line Status is either Awaiting Shipping or Supply Eligible.
What Impact of changing the customer Name(along with Bill To and Ship To) at the header level.
Thanks,
Helen

Hi Helen-Oracle
As said above there should not be an impact if the warehouse on the order before and after changing the customer, ship to and bill to remains same.
Additionally, if the item on-hand qty is sufficient to reserve the item and there is no B2B internal requisition kicked off.
As long as the above conditions are fine, I don't see any impact of changing the customer, bill to and ship to.
Also, you can run a complete wing to wing cycle in case you really want to test the behavior of the system in such scenario.
Please feel free to mark the response as helpful or correct if you think it is helpful and to help people easily find help and answered responses.
Thanks
Mirza Tanzeel

Hello, I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13..

Hello,
I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13:AK something like that and all the other previously connected devices appear in this same form in the bluetooth list how do I fix this back and it is confusing to connect to a device with no name but some unknown Bluetooth address so how do I find the device name back????
SO PLEAZZZZZ HELP!!!!!

An iPod can only pair with an iPhone for internet sharing provided that the iPhone has the subscribed to the tethering plan. The BT profiles do not permit file tansfer between IDevices by BT. The only BT pairsin is by app and those ar for peer-to-peer gaming.

When I set up my exchange account on iPad2 cameras always become disabled. What's the problem, can I use my cams along with using exchange mail?

Can someone help me with this question? Why iPad 2 disables camera when I set up my Exchange mail account? How can I enable camera along with using mail?

The iPad is not disabling the camera - the administrator for your Exchange account is. You need to go to the person who administers your Exchange account and ask them to lift the restriction on cameras in their Exchange system.

Can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion? The MFP can be either 3-in-1 or 4-in-1 i.e with fax

can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion?
The MFP can be either 3-in-1 or 4-in-1 i.e with fax

I bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.

How, please, can I get rid of the icons in the bookmarks toolbar so I have space for more bookmark names? Thank you

I try to get as many items as I can in the bookmarks menu toolbar (typically using 3 letter names). F4 adds an icon next to each name - taking up valuable space. How, please, can I get rid of the icons in the bookmarks toolbar so I have space for more bookmark names? Thank you.

If you remove the names then you may have a problem with organizing or searching for bookmarks.<br />
If you do not want to use the extension then you can achieve the same effect with code in userChrome.css<br />
That is what I would do.
Add code to userChrome.css below the @namespace line.
* http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks .toolbarbutton-icon { display:none !important;}
</nowiki></pre>
* http://kb.mozillazine.org/Editing_configuration
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

Can I rotate mark ups created with Adobe X on the background page of a PDF document?

Can I rotate mark ups created with Adobe X on the background page of a PDF document?

Thank you for taking the time to reply.
I tried both ways and neither works. It gives me a prompt box that I have to click "next" for every page but after going thru all pages, nothing is sent to the printer.
Also, all directions I've read indicate it will print to the default printer. If my default printer is on a network, will that cause problems....
and...
should I be getting a prompt box on every page? I thought all this would happen behind the scenes and not force me to interact with every page.
dc

Need supplier name along with lot no.

hello sir,
i need to show supplier name along with lot no.
here is my query--
SELECT DISTINCT(b.vc_field1),a.vc_lot_no,a.nu_balance_qty--, c.VC_SUPPLIER_NAME
FROM STK_LOT_SUMMARY a, DT_RECEIPT b, makess.mst_supplier c, purchase.MST_SUP_ITEM d
WHERE a.vc_comp_code = '01'--:GLOBAL.vc_comp_code
AND a.vc_comp_code = b.vc_comp_code
AND b.VC_COMP_CODE=c.VC_COMP_CODE
AND c.VC_COMP_CODE=d.VC_COMP_CODE
AND c.NU_SUPPLIER_CODE=d.NU_SUPPLIER_CODE
AND a.VC_LOT_NO=b.VC_LOT_NO
AND a.vc_item_code=b.vc_item_code
AND b.vc_item_code=d.vc_item_code
AND a.vc_item_code = 'SYUWLNZXYWXXX00400100'--:HD_VERIFY.vc_item_code
--AND b.vc_field1 IS NOT NULL
AND a.vc_lot_no <> '0'
AND a.nu_balance_qty > 0
GROUP BY (a.nu_balance_qty,b.vc_field1, c.VC_SUPPLIER_NAME,a.vc_lot_no)
whose result is---
VC_FIELD1     VC_LOT_NO     NU_BALANCE_QTY
     11     48.00
22 B     8     192.00
181 A     3     200.00
54 F     13     244.50
143     10     400.00
1343     4     1,000.00
181     2     1,249.00
but when i include supplier name(removing comment) result would be....
VC_FIELD1     VC_LOT_NO     NU_BALANCE_QTY     VC_SUPPLIER_NAME
     11     48.00     Chandak Wools
     11     48.00     Somani Woollen Mills
     11     48.00     Sonu Monu & Brothers
     11     48.00     Somani Woolen Pvt. Ltd
181 A     3     200.00     Chandak Wools
181 A     3     200.00     Somani Woollen Mills
181 A     3     200.00     Sonu Monu & Brothers
181 A     3     200.00     Somani Woolen Pvt. Ltd
143     10     400.00     Chandak Wools
143     10     400.00     Somani Woollen Mills
143     10     400.00     Sonu Monu & Brothers
143     10     400.00     Somani Woolen Pvt. Ltd
1343     4     1,000.00     Chandak Wools
1343     4     1,000.00     Somani Woollen Mills
1343     4     1,000.00     Sonu Monu & Brothers
1343     4     1,000.00     Somani Woolen Pvt. Ltd
22 B     8     192.00     Chandak Wools
22 B     8     192.00     Somani Woollen Mills
22 B     8     192.00     Sonu Monu & Brothers
22 B     8     192.00     Somani Woolen Pvt. Ltd
181     2     1,249.00     Chandak Wools
181     2     1,249.00     Somani Woollen Mills
181     2     1,249.00     Sonu Monu & Brothers
181     2     1,249.00     Somani Woolen Pvt. Ltd
54 F     13     244.50     Chandak Wools
54 F     13     244.50     Somani Woollen Mills
54 F     13     244.50     Sonu Monu & Brothers
54 F     13     244.50     Somani Woolen Pvt. Ltd
please help me how could i write query to get lot no along with supplier name.
total no of rows is 7.but while adding supplier name it compare item code and executes 28 rows.
regards

Hi Ishika,
Also check your Joins.
May be you are missing something else.
Thatz the reason all the four supplier combination are repeated.
Go through ur joins again.
Don't forget to use any number column as nvl(nu_balance_qty,0).

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan

I have a problem with the icon in the menu bar MacBooster Beta 3 I can not delete

I have a problem with the icon in the menu bar MacBooster Beta 3 I can not delete
www.advancedmaccare.com
and installed and uninstalled the program and past cleanApp or ccleaner programs and nothing works
<Link Edited By Host>

Beta = buggy software. You need to contact the vendor.

I can download yosemite but then it will not install? I am stuck with the icon on the dock with the downward arrow in it but when I double click on it or try to open it nothing happens. Thanks.

I can download yosemite but then it will not install? I am stuck with the icon on the dock with the downward arrow in it but when I double click on it or try to open it nothing happens. Thanks.

This is a DUPLICATE request.
:See response in https://support.mozilla.com/questions/893523#answer-271175

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

As. Fashion designer can I use illustrator cc along with photoshop cc

As a fashion designer can I use illustrator cc along with photoshop cc
@is illustrator cc compatible with photoshop cc?

Thank you so much for answering my question. It was a great help.
SIncerely,
Gail Sarasohn

How can I share applications and softwares with different users of the same computer?

First question: How can I share applications and softwares with different users of the same computer?
Second : Can I use 2 different I cloud accounts to synt 2 iphones with one computer?

Applications installed on the admin account are available to all user accounts unless Parental Controls are enabled.
Yes. Separate user accounts, help here > How to use multiple iPods, iPads, or iPhones with one computer

Can I print VI names along with the icons in the hierarchy print?

Similar Messages

Maybe you are looking for