Can I read in the address being used?

In the system I have, there are two ways to access it. Through a normal http link or through the https. The problem I'm having is that the graphs that I'm using will only display if users enter through the https link. Is there any way for me to build a check into the system where I can see if the users connected through the http link? That way I could create a new parameter that will fix the graphs for those users as well.
Thanks.
Josh

Hi Josh,
you should be able to parse it out of the environment variable REQUEST_PROTOCOL:
owa_util.get_cgi_env( 'REQUEST_PROTOCOL');For HTTP-calls with Firefox, this would return HTTP/1.1
I guess it should be similar with HTTPS. Put a substring around and there's your solution.
You can get a lot more information out of the CGI environment.
Try OWA_UTIL.PRINT_CGI_ENV to get everything into a region if you need something else.
-Udo

Similar Messages

Firefox loads, but no longer works. You can't type in the address bar, use help or anything. What do I do?

I can get Firefox to open, but other than that nothing works. It doesn't respond to type or the mouse. In fact, it acts like your keyboard or mouse are no longer working. Which they are.
It was working fine & then it just stopped.
I've tried uninstalling & re-installing. That didn't help, nor did going back to an older version. I even tried using Windows restore point & going back in time. Nothing has helped.
My OS is Vista.
Can anyone help me? Thanks.

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 21.0: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When I take a photo it goes to camera roll and my photo stream. This doubles the memory being used. Can I delete the camera roll?

When I take a photo it goes to camera roll and my photo stream. This doubles the memory being used. Can I delete the camera roll? This seems pointless to have the same pictures twice. My Photo Stream pictures upload to my PC, so why should I have the same photos in Camera Roll?
Am I supposed to delete pictures in camera roll after they go into My Photo Stream? Why can't I just take a picture and it go to photo stream on its own? My camera roll AND My Photo Stream go back to March 11, 2014

You're misinformed and have asked several questions that I'll try to tackle.
No it doesn't double the memory. The Photo Stream image is simply a pointer to what you have in your camera roll.
If you delete pictures from your camera roll, leaving them only in Photo Stream, you will lose those images forever if you don't then pull them out of Photo Stream on another connected device. Photo Stream is meant to be TEMPORARY cloud storage for your images. Read about it here: iCloud: My Photo Stream FAQ
You should ALWAYS offload your images if you want to keep them. See how to do that here: iOS: Import personal photos and videos from iOS devices to your computer

Can i revert back to the ios 5 maps on my pad. Im not quite satisfied with the maps being used on the ios 6 especially the street/ regular map

Can i revert back to the ios 5 maps on my pad. Im not quite satisfied with the maps being used on the ios 6 especially the street/ regular map. It looks good but some details like gas station, restaurants, sidestreets which are good references when travelling are not there anymore.

Load this map and save it on your Home Screen
https://maps.google.com/

I have an ipod that I have been using for iTunes, when I connect now to sync, and hit the eject ipod, I get a warning it can't eject due to applications being used in another program. I am having trouble disconnecting. Help!

I am having a problem with the new iTunes store. I can connect my ipod, and it will show that it is syncing. Once the sync is complete on iTunes, my ipod still shows that it is connected, do not eject. I have not had a problem with this until the new verision of iTunes. When I go to eject my ipod, it tells me that it can't eject due to application being used in another program. I did receive an ipad 2 for Christmas, that I also sync with iTunes, but only the ipad shows up in my devices on the site, what happened to my ipod device and how to add it back to devices? Help is greatly appreciated. Thanks.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I am not being able to connect to another Apple device using the Face time what settings do i need to check.The device being used is an iPad mini

I am not being able to connect to another Apple device using the Face time.The device being used is an iPad mini.
The internet connectivity is perfect the wifi is even working.

'''plafstudiesdotc'''
You are welcome.
'''''So that other users can find answers that have worked, please take a couple of minutes to return to the forum, sign in and click "Solved" next to my answer. Thanks. '''''

DPM encountered an error while reading from the recovery point used for recovery.

Hi Guys I'm getting this error:
DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
selected a share for recovery, the path to its contents is missing from the recovery point. (265)
The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM. the C Drive is fine. the D and E Drive are different
in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
I've removed the Protection from drives D and E and reinstated it but every recovery point created
brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.

Hi,
It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
See the DPM supported and unsupported scenarios
here under the deduplication issues section.
We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
Data Protection Manager2012 R2 is installed on Windows Server 2012.
Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Can I turn off the wireless and use the wired connections at the same time?

Can I turn off the wireless and use the wired connections at the same time?
This is to avoid transmission when I work without the need for wireless

Yes, you can. Just open the web interface of the router. On your browser type the IP address of your router, usually http://192.168.1.1 go to wireless tab and disable it.

I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?

I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?

I can't seem to find an app that costs my available balance. iTunes said I need to spend it ALL before I can change stores. This means I cannot totally change stores.... Hopeless.

Windows Easy Transfer (WET) Issues with External Hard Drive - "Can't read from the source file or disk"

I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-John

I think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed".

I can no longer see the address field in safari, can anyone help?

I can no longer see the address field in safari, can anyone help?

Abarryseymour
That didn't work to get the safari address bar and the google search bar on my safari browser. could I have a virus???
Which OS, which Safari?

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296

Can we Read/Display the content of Word/PDF file in Flex 3/4 ?

Hello All,
Can we read/display the content of Word/PDF file in Flex 3 or Flex 4?. I have one word file containing Arabic and English content with some settings like Bold, Color, Align etc. I want to display the content of this word file as it is in the flex web application.
Awaiting for prompt reply.
Thanks and Regards

thank you for your immediate reply, but,
sorry, this does not work.
With this code:
<cfpdf action = "read" source = "dok_1.pdf" name =
"mypdf">
<cfdump var="#mypdf#"/>
I get this result:
Everything, but no text of the document.
PDFDocument
Application name of application
Author bimbam Verlag GmbH
CenterWindowOnScreen [empty string]
ChangingDocument Allowed
Commenting Allowed
ContentExtraction Allowed
CopyContent Allowed
Created D:20080710
DocumentAssembly Allowed
Encryption No Security
FilePath [empty string]
FillingForm Allowed
FitToWindow [empty string]
HideMenubar [empty string]
HideToolbar [empty string]
HideWindowUI [empty string]
Keywords [empty string]
Language [empty string]
Modified [empty string]
PageLayout SinglePage
Printing Allowed
Producer [empty string]
Properties [empty string]
Secure Allowed
ShowDocumentsOption [empty string]
ShowWindowsOption [empty string]
Signing Allowed
Subject [empty string]
Title Rheinische Angler-Zeitschrift
TotalPages 1
Trapped [empty string]
Version 1.3
Maybe i do not understand the cfpdf tag the right way.
What i want is a kind of pdf-to-text conversion.
Do I have to use the processddx action? I do not think so.
But there is a property DocumentText .. ?

Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

Hello
I have Lync 2013 and 2010 , still i didn't finish my migration completely from 2010 to 2013 .this is coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013 front end and backend server's .
later on after restarting both the front end and the back end server's i start having hundred's of these error's related to "LS Call Park Service".
so any advice for these issue ? and what is the effect for these error .
below is the error I got .
The database being used by Group Pickup is not the appropriate version.
The database is not the correct version:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
Actual... SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
Cause: The database has not been upgraded.
Resolution:
Upgrade the database to CU1.
==============================================================
There was a problem communicating with the Group Pickup backend database.
There were problems accessing SQL server:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
Error code: -2146232060
Error number: 229
Cause: This may be caused by connectivity issues with the backend database.
Resolution:
Check if SQL backend is running and accepts connections from Group Pickup.
=============================================================================
Kind Regards
MK

Hello
thanks Holger for u r replay .
due to the Microsoft article about the cu :
I run only :
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
Install-CsDatabase -CentralManagementDatabase command to apply the changes.
here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
VERBOSE: Install databases required by Lync Server role(s).
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is DbState_RequiresMinorUpgrade.
Database rtcxds set to mode Restricted.
Dropping all procedures, functions and views from database rtcxds.
Executing RtcDb.sql...
Adding master role...
Setting owner for database rtcxds to sa.
Creating login MyDomain\RTCHSUniversalServices.
Creating user MyDomain\RTCHSUniversalServices.
Creating Schema MyDomain\RTCHSUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
Setting the database rtcxds to multi user mode.
Database rtcxds is set to multi user mode.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcshared.
Database created by script "RtcSharedDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
Checking state for database rtcab.
State of database rtcab is DbState_RequiresMinorUpgrade.
Database rtcab set to mode Restricted.
Dropping all procedures, functions and views from database rtcab.
Executing RtcAbTypes.sql...
WARNING: Warning: Failed to execute batch --
-- Copyright (c) Microsoft Corporation. All rights reserved.
exec sp_addrole N'ServerRole'.
Executing RtcAbDb.sql...
Setting owner for database rtcab to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
Setting the database rtcab to multi user mode.
Database rtcab is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
Database created by script "RgsConfigDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
Database created by script "RgsDynDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
Checking state for database cpsdyn.
State of database cpsdyn is DbState_RequiresMinorUpgrade.
Database cpsdyn set to mode Restricted.
Dropping all procedures, functions and views from database cpsdyn.
Executing CpsDyn.sql...
Setting owner for database cpsdyn to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
Setting the database cpsdyn to multi user mode.
Database cpsdyn is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
Database created by script "ArchivingDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
State of database LcsCDR is DbState_RequiresMinorUpgrade.
WARNING: The database LcsCDR being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
WARNING: The database LcsCDR being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
Database LcsCDR set to mode Restricted.
Dropping all procedures, functions and views from database LcsCDR.
Executing CdrDb.sql...
Setting owner for database LcsCDR to sa.
Creating login MyDomain\CSAdministrator.
Creating user MyDomain\CSAdministrator.
Creating Schema MyDomain\CSAdministrator.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
Setting the database LcsCDR to multi user mode.
Database LcsCDR is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing CdrJobs.sql...
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
State of database QoEMetrics is DbState_RequiresMinorUpgrade.
WARNING: The database QoEMetrics being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
WARNING: The database QoEMetrics being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
Database QoEMetrics set to mode Restricted.
Dropping all procedures, functions and views from database QoEMetrics.
Executing QoEDb.sql...
Setting owner for database QoEMetrics to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
Setting the database QoEMetrics to multi user mode.
Database QoEMetrics is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing QoEJobs.sql...
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
VERBOSE: No changes were made to the Central Management Store.
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
PS C:\Users\MK>
I hope some one can confirm no issue with what I did ??
Kind Regards
MK

Can I read in the address being used?

Similar Messages

Maybe you are looking for