Can i save data from a remote server to a client computer?

written a vi which is used to collect data and store it in a file.data colection is done on a remote system.i am able to control the front pannel frm the client using front panel control in labview 6.1 using web browser.
how can i view this data once the experiment is over.(ie the file in server)
the client and server are on WAN.
should i write it to a FTP server.
how should i go abt it,

Hi,
The easiest way is to save file into shared directory on remote PC. Then you can read this file with reading functions from "File I/O" palette. In this case you should specify path to the file for example as (in windows):
\\LocalNameOfRemotePC\C\Documents and Settings\Sithara\My Documents\sharedDir\myfile.txt
first you write the name of remote PC in local net, then disk name, and path to the file.
Good luck.
Oleg Chutko.

Similar Messages

To upload the time data from a remote server into R/3 2011 infotype

hi all,
i have been given a task to upload the time data of the employees into the 2011 infotype from a remote time recording server, can this problem be solved with the help of a rfc which will run on that remote server, please guide me how to approach this problem.
thanks & regards,
santosh.

Hi Santosh,
You can use ALE for this. The message type is HRSM_D for upload of time data.
Reward if useful.
Regards,
Senthil

Can i fetch images from my remote server to UIImageView or a preview thumbnail in ios app?

consider i have 1000 images in my hosting, i want all those images in my ios app. It is like ,in one screen around 9 thumbnails of image must be loaded from the webserver .And when i swipe the screen to the right another set of 9 thumbnail images must be loaded , it goes on untill all the image from the server are loaded. and when i click on a thumbnail the image must be shown in full screen. When i add more image to the hosting, the swiping of pages and thumnail previews must also dynamically increase. is there any way to achieve this concept ??

khankmk wrote:
if yes,then can u tell me how to achieve it?
Again, to give you the answer you have requested - yes, I can.
This is roughtly equivalent to asking a doctor how to remove an appendix. It isn't the most difficult surgery in the world, but it does require some training. It is not something I am able to explain. I could tell you to setup a web server with REST interface to serve images, metadata, and structure. Then write your app to populate some browser tables based on that data. Somehow, I don't think that explanation is going to provide much help.

Can I save data in a snapshot from signal express 2013 LE?

Can I save data (in txt or excel format) from a snapshot from signal express 2013 LE? My data buffer is too larege to export to excel. When I try to take a snapshot, I do not see any data. Are snapshots supported in the LE mode? This is the free version that comes with the USB 6009 ADC.

Yes, the snapshot function is available for SignalExpress 2013 LE. Does the snapshot function as intended when you try other projects?
Daniel P.

How can i get data from another database SQL Server use database link from

I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

hi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar

How can I migrate data from SQL Server 6,5 to Oracle 8?

We have a web site based on Microsoft SQL Server 6.5.Now we plan
to migrate the database to Oracle 8.
We have redesigned the tables structure and created tables under
Oracle 8, so we only need to migrate data from SQL Server.
We've exported data from SQL Server to text files.
How can we import data from files and restore to Oracle tables.
Is there a solution which let us to import data for particular
table columns,not all columns?
We'll be appreciated if somene can give suggestions.
Regards
Michael
null

Thank you for your reply.
I'll try the Oracle sqlloader utility first.
Regards
Micahel
Oracle Migration Workbench Team wrote:
: Michael,
: Oracle sqlloader is user for this sort of operation, see
: Oracle8i Utilities
: Release 8.1.5
: A67792-01
: available online through Oracle Technology Network.
: The Oracle Migration Workbench can be used to create bcp and
: sqlloader scripts, though since you have altered the schema
these
: scripts would need to be altered by hand after generation.
: Some thought has been put into redesigning table structures in
: the Oracle Migration Workbench, but currently it looks like
this
: reengineering will be left to be done by other tools, eg
Oracle
: Designer, once the SQLServer database has been duplicated with
as
: little change as possible onto Oracle.
: Hope that helps,
: Turloch
: Oracle Migration Workbench Team
: Michael (guest) wrote:
: : We have a web site based on Microsoft SQL Server 6.5.Now we
: plan
: : to migrate the database to Oracle 8.
: : We have redesigned the tables structure and created tables
: under
: : Oracle 8, so we only need to migrate data from SQL Server.
: : We've exported data from SQL Server to text files.
: : How can we import data from files and restore to Oracle
tables.
: : Is there a solution which let us to import data for
particular
: : table columns,not all columns?
: : We'll be appreciated if somene can give suggestions.
: : Regards
: : Michael
: Oracle Technology Network
: http://technet.oracle.com
null

How do I merge data from table1 on server 1 to final table on server 2 with a stored procedure to execute every 4 hours.

How do I merge data from table1 on server 1 to final table on server 2 with a stored procedure to execute every so many hours.

Hello,
If you had configure server2 as
linked server on the server1, you can run the following statement inside stored proceduce to copy table data. And then create a job to the run stored proceduce every 4 hours.
Insert Into Server2.Database2.dbo.Table2
(Cols)
Select Cols From Server1.Database1.dbo.Table1
Or you can use the SQL Server Import and Export Wizard to export the data from server1 to server2, save the SSIS package created by the wizard on the SQL Server, create a job to run the SSIS package.
Reference:http://technet.microsoft.com/en-us/library/ms141209.aspx
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

I can not synchronize data from the prelude livelog

I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
The Prelude can not apply metadata in it.
please can someone help me

Hi -
When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
Michael

ORA-28150 when accessing data from a remote database

Portal Version: Portal 3.0.9.8.0
RDBMS Version: 8.1.6.3.0
OS/Vers. Where Portal is Installed:: Solaris 2.6
Error Number(s):: ORA-28150
I have a problem with using a database link to access a table in
a remote database. So long as the dblink uses explicit logins
then everything works correctly. When the dblink does not have a
username then I get the ORA-28150 message. The database link is
always public. A synonym is created locally that points to a
synonym in the remote database. I am using the same Oracle user
in both databases. The Oracle portal lightweight user has this
same Oracle user as its default schema. The contents of the
remote table are always visible to sqlplus, both when the link
has a username and when it doesn't have a username.
All the databases involved are on the same version of Oracle.
I'm not sure which Oracle login is being used to access the
remote database, if my lightweight user has a database schema
of 'xyz' then does portal use 'xyz' to access the remote
database? I would be very grateful for any help or pointers that
might help to solve this problem.
James
To further clarify this, both my local and remote databases
schemas are owned by the same login.
The remote table has a public synonym.
The link is public but uses default rather than explicit logins.
The local table has a public synonym that points to the remote
synonym via the database link.
If I change the link to have an explicit login then everything
works correctly.
I can view the data in the remote database with TOAD and with
sqlplus even when the database link has default login rather
than explicit login.
This seems to point to Portal as being the culprit. Can anyone
tell me whether default logins can be used across database links
with portal?
TIA
James

832019 wrote:
One way to do this is by creating a database link and joining the two tables directly. But this option is ruled out. So please suggest me some way of doing this.Thus you MUST use two connection strings.
Thus you are going to be either constructing some intricate SQL dynamically or you are going to be dragging a lot of data over the wire and doing an in memory search.
Although realistically that is what the database link table would have done as well.
Might be better to look at moving the table data from one database to the other. Depends on size of course.

How can I pass data from a form guide to another form in a business process

How do we pass data from a form guide to another form(not necessarily a guide) without having to open the form. For example we have a small form guide to capture the contract id so we can then get data from contracts table to present to the user in a form. We want the user to open the guide (either Flex guide or form guide) to enter the contract id. Upon submission we want the process to get the contract data and put it into the form that will be opened at the next step by the user without having a user interact with the form to get the data into it. In other words we need the process to get the data and populate a different form than the form guide the contract id was entered in and this new form needs to be opened in the next step by the user.

Firstly, I'm assuming that you have a Forms ES Server if you are rendering a Guide. This could be either version ES1, ES2/2.5 or ES3/ADEP
If you submit the form back to the server, you can populate a second (PDF/XDP) form with the data bound to the same schema/Data Model using Forms ES.
You referred to the next user in the chain - If you are using Process Management, this is very easy, as you define what form is used to render the data in the "Presentation & Data" section of the Assign Task activity

I would like to use DDE to send data from a Lookout Server to an Excel

Hello National Instruments,
I would like to use DDE to send data from a Lookout Server to an Excel
Spreadsheet.
I have Lookout 6.1 on a server connected to 4 client workstations
The operating system on the server is Windows Server 2003 R2; Standard Edition;
Service Pack 2
I have opened DDE Share but after filing in Share Name; Static Application
Name; Static Topic Name
I get a message, "Can't bind to DSDM service"
I also get this message when I press add a Share
What are the steps to setting up this type of communications link?
Thanks,
David Lopez
Scada Functional Analyst

Ryan,
I have followed the steps on the Knowledge Base "How do I use DDE To Send Data Across the Network To Excel From Lookout?" but what I am seeing is that the computer with excel (Computer B)hangs up displaying an hour glass continuously leaving me no option but to go into task manager to stop excel. It appears to me that the dde share is not working properly on my windows xp where lookout resides or I do not have a certain service turned on. I do have the DDE services turned on both computers. I have my computer set up as computer A with Lookout and Process1 as the process with a pot set up as pot1. On my computer (Computer A) I also have the dde share set up per the KB example.
On computer B I have the dde services turned on and I am typing the following into an excel worksheet Cell ='\\TAG23232\NDDE$'|'Process1$'!Pot1
TAG 23232 is Computer A's Name
Do you have any suggestions???

Retrieving data from a remote DB using ODBC ?

Hi,
Has anybody tried to collect some data from a remote DB in InDesign plugin by using ODBC ? I want to know the basic steps including what I have to add in the Xcode project, how to connect to remote DB, and how to retrieve data in plugin by sql query ?
TIA,
Nima

I think you need to add /usr/lib/libiodbc.a to your Xcode project. also you will want to look into sql.h and sqlext.h assuming you're connecting to database such as MySQL to see what's the API you will use to communicate thru ODBC. But the code should be purely C++, nothing InDesign specific, you can write it as a separate library or an InDesign Boss object.
You will also need to install ODBC driver that's probably would be supplied by your database vendor. So for MySQL, there is a driver you need to download from MySQL site and install, and configure thru OSX's ODBC Administrator tool.
Thanks!
lee

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

How can we post data from CRM to SAP using ABAP proxies???

Hi ,
Can anyone hep me to create interface for the following scenario How can we post data from CRM to SAP using ABAP proxies???, can I find any document ???????
Thanks in advance
Andy

Andy,
Please look at these weblogs.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
These should give a good idea about implementing Proxies.
Regards,
Ravi

How to replicate data from MS SQL Server to Oracle

Hi,
Can someone please help me on how to replicate data from MS SQL Server to Oracle 8i database.

Dear,
I'm a student.
I do simple replication on Oracle 8.0.5 successfully. (one master site and one snapshot site). I only use the SQL*Plus and Schema Manager to do.
But when I do advance replication (multimaster replication) I meet many problem. So I don't get the result.
Do you show me the technology to do that ?
Thanks !

Can i save data from a remote server to a client computer?

Similar Messages

Maybe you are looking for