Can I send just the color file to my editor without sending the sequence

I am coloring a trailer and I am new to color. What I want to do is grade my sequence that I media managed from my editor and then save it and send my editor just the color info to him so he can render it on his system.
I'm trying to avoid media managing it again and dropping off my drive to him.

You could try to simply send the colorproj. Have your editor open the Media Managed version that you were working with. There may be some path reconnecting to do, or not.
Or they could create a new project, as long as it is identical in every way, then an "Import Color Corrections" from your session will apply all your grades to that project. Be aware that there may be some aspects of the project that do not travel with that container folder -- User Shapes, plugins, etc., that otherwise reside in the User/Library/Application Support/COLOR folder.
I've often thought this might be an interesting business model, except for the fact that not all GPUs render the export image exactly alike. So, keep that in mind, too.
jPo

Similar Messages

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

How can I Make just one color pop and the rest a black and white photo??

How can I make just one color pop and the rest of the photo black and white?? I'm using iphoto...

3rd party image editors like Photoshop Elements for Mac can do it:
Click to play video screenshot
Or use it to keep an object in color and the rest B/W.
Click to view full size
OT

How can I record just the Capitals hockey games?

I just switched from Comcast to Verizon. I am able to record the pregame show and the post game show for the Washington Capitals, but I can't record just the Capitals hockey games. I do not want to record all of the hockey games; I just want to record the Capitals Games. I don't want to have to search through the listings every week to record the games. Can you tell me if there is a way to do this?

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

How can I get just the text to resize, rather than the entire web page?

I used to be able to re-size just text on a webpage by typing Ctrl + +. Today, the entire webpage re-sizes, and when I move to another page it reverts. (I see this mostly in Facebook.). Why did this change, and can I go back to having just the text re-size?

''How can I get just the text to resize -- zoom text only''
steps
#"Alt" if no menu bar, then
# View > Zoom > Zoom Text Only
Zoom text of web pages - MozillaZine Knowledge Base
:http://kb.mozillazine.org/Zoom_text_of_web_pages
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again i keep getting two lots of pics..how can i get just the one set again? thnx

I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again i keep getting two lots of pics..how can i get just the one set again? thnx

You're welcome.
All photos transferred from your computer are stored in the iPhone's Photo Library regardless if you select a single album or folder of photos to be transferred or multiple albums or folders. The photos on the albums or folders of photos include a pointer to the original photos stored in the Photo Library. The photos are not duplicated taking up double the storage space. This way you can view the photos in an album or folder of photos only by selecting the album or folder, or all photos in all albums or folders by selecting Photo Library.
Makes more sense when transferring multiple albums or folders of photos which cannot be changed when transferring only a single album or folder of photos.
The same applies with iTunes and music playlists. A song can't be in a playlist unless it is in the main iTunes library. Placing a song in a playlist does not duplicate the song.

My new I5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?

Hi there everybody,
My new Iphone 5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?
Some help will be greatly appreciate.
Thanks much!

When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer? Your iTunes library does not have an email address. An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases. Changing your Apple ID will not make songs disappear from your computer's iTunes library.
If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID. In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password). That may not be your current email address, but Apple uses it as your user name, so it does not matter.
On the iTunes Store Home screen, click on Purchased under QUICK LINKS. This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost.
NOTE: If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID.
For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
If that's not what you mean by "changed the email address on my account," please post back with more details.

I no longer have access with the e-mail on my account. Can I change just the email on it to my current?

I no longer have access with the e-mail on my account. Can I change just the email on it to my current? I know it is dumb but I just got a new iPhone and can't add it.

You should be able to login here and change the email address on your account : http://appleid.apple.com

Im having trouble with my magsafe L adapter, i just bought my macbook pro around october-november 2011. just wondering if their still gonna replace it though i lost my receipt already. can i buy just the wire, i mean the "L" not the whole charger?

im having trouble with my magsafe L adapter, i just bought my macbook pro around october-november 2011. just wondering if their still gonna replace it though i lost my receipt already. can i buy just the wire, i mean the "L" not the whole charger?

Punch the computer's serial number here and check your coverage:
https://selfsolve.apple.com/GetWarranty.do

How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages. Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web. However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine. I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours. How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s). Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

How can I trace just the lines of a hand drawn sketch.

Hello everyone,
I'm sorry its another inexperienced Ai user here.
I have been using photoshop for a good while now but have only just started to use illustraotr and I could do with some help.
I have a bunch of simple black and white illustations, which I want to vectorise and arrange and compile into completed picture and patterns in Illustrator. I have tried using the image trace function of CS6 and it gives great results but I always end up with a white box behind the illustration. I dont seem to be able to work out how to select just the outline and have a transparent background so that I can work with the differnet bits to creat a completed picture.
Idealy i will have each individual illustraiton on a seperate layer initially as I build up a picture then I will flattern it all togehter at the end.
Sorry if this sounds a trivial matter but any help would be greatly recived.
H

I use sketches a bunch. I love the fact that I can draw on paper, scan my sketch, and finish it with illustrator. The first thing I do when I open up the file is lock it down and creat a new layer. Make sure the new layer is on top of the locked layer(the layer that has you sketch). I use 3 different ways of re-creating my sketch. The first is by using the shapes and shapes builder tools. Add in pathfinder here and there and depending on your design, you could complete a whole sketch with this method alone. For more complex drawings I use the pen tool, this is great for making precise shapes and building composition. One note when using the pen tool is to make sure you have a color and stroke ready when you start using the pen tool, also after you make your first click or anchor with the pen tool set the opacity to around 50%. Another option that I use is to use brushes to create the strokes, and then join or combine the strokes and use live paint or just fill them in as I go. Whichever method you use, lock down the sketch so you can't select it. Make sure that the image of your sketch has good contrast and color before you start. If you have to use Photoshop to touch it up and then bring it in to Illustrator. I also make sketches and then make the basic compsition with illustrator and progressively build the design. Just a thought for those who don't have scanners or don't want to mess with a scanning a design. Hope some of this helps.

I have OSX Maverick on an iMac using Outlook e-mail. PDF attachments are included in the e-mail as the whole document rather than just the PDF icon. How can i have just the PDF icon as an attachment?

In Outlook my PDF attachments appear as whole documents and not just the PDF icon. How can I have attachments included as PDF icons and not the documents?

For your own viewing, you can of course control-click on the attachment and select "View as Icon".
For others' viewing, it depends upon their email reader. To ensure that attachments are not displayed expicitly you can put them all in a zip file (via control click and "Compress") then attaching them, or you can use third party stuff like Attachment Tamer.
charlie

In the C309, How can I use just the regular black ink cartridge only?

Hi
I just bought a HP C-309 a short time ago. I bought a HP reg black cartridge XL quite quickly. This thing is a sweet
machine, works perfectly, but is a terrible terrible ink hog.
Had I known, I would have gone for the Kodak which touts much lower ink costs.
I only use this thing for documents. I do not want to keep putting color cartridges in. They are all on low except for the black XL cartridge. How can I set it up to use only this cartridge for black and white..and just leave the color ones on empty.
I will have to get rid of it if I have to keep feeding it this way. The ink levels seem always low. By the way, the help asks me for model number. They want to know whether it is 309n or 309g. I see no way to find out..no notations on machine or purchase documents. HP, if you need this info...make it easy for the consumer to FIND the info...gheesh!

Hi lyn1360
There are several circumstances when color ink may be used—primarily to improve print quality, and sometimes to improve printer reliability—even if the document appears to be only black text-and-graphics. Many HP printers utilize chemical interactions to improve the quality and permanence of plain paper black text-and-graphics by adding small amounts of color ink to certain black areas. Some dark images which look black to human eye may contain a combination of black and color inks. For black and white images and photos or grey black which we think as black, a blend of colors called "composite black" may be used to achieve significantly better image quality and smoother gray tones than can be accomplished with black inks alone. Some inkjet printers utilize pigmented black ink, which is incompatible with some inkjet photo paper. In this case, dark or black areas are made up of color inks.
For users who wish to print utilizing just black ink (despite the reduced print quality), many HP printers offer options. For example, a driver color setting (by selecting "print in grayscale with the black cartridge only" in printing preferences) specifies printing using only black ink. In addition, many IPH printers can operate in "reserve mode," which allows the user to continue to print with just the black cartridge when the color cartridge is removed or not installed.In HP IIC systems like your printer C309, all supplies are required to be installed in the printer for the printer to function.
To find the correct model number for your printer, you can just open the carriage access door and on the right side you can see the model number. For OJ Pro printers, we need to open the cartridge access door on the front left side to see the model number.
For more info regarding the ink usage, check the below link:
http://h10060.www1.hp.com/pageyield/en-019/articles/howInkIsUsed.html?cCode=us
Mark this post as answered so that others might find it useful
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How can I text just the letter K?

It keeps getting changed to I. Over and over and over and over. Never learns that I want to send K. I can't add K as a shortcut because it's actually too short (go figure). I always have to cancel the attempt to auto-correct to "I" or else just forget and send the "I" to whoever.
Autocorrect is annoying but overall I want to leave it turned on.
Does anyone know of anything I can do to get the letter K to be accepted as a valid character to send by itself?

I guess the send button is being considered as a confirmation to accept the correction, in which case you may want to post that as a bug…
http://www.apple.com/feedback/
I didn't test hitting send sorry I was trying to avoid polluting my messages (& my recipients ).
I did notice that the 'double tap spacebar' shortcut (to add a period) would leave the K in place. Perhaps you need to turn the single key press answer into a 3 tap one! A space may be enough to move away from the autocorrect popup.
If you sync to a Mac you may find the spelling list …~/Library/Spelling/dynamic-text.dat
Textmate 2 will show the text along with the special record separator - it is a custom format, so don't edit it.
Sadly I can't figure out how to move this back to iOS to correct it, Apple really need to add user dictionary editing as a feature, otherwise habitual typo's become permanent.
Resetting the dictionary could help, but it's unclear is 'K' to 'I' is stored in that dictionary.

Can I import just the audio from a DVD into itunes????

I'm a beginner to this Itunes and have been wondering this. If I can take audio files off of CDs and put them into Itunes. Can I take just audio from a DVD and put that into Itunes. Example: Can I take the audio from a live concert DVD for just one song?

Welcome, Don, to the Apple Discussions!
No, you can't do that with iTunes.
There is third-party software available that allows you to do so, though.
You might want to pay a visit to Google and enter
b dvd audio ripping
or some such terms.
Good Luck!

Can I send just the color file to my editor without sending the sequence

Similar Messages

Maybe you are looking for