Can i send mail to yahoo from work flow

can i send mail to yahoo from work flow  if it is possible how do i do that ? is this program enough if yes how do i do that ? do i need to write or change any coding

Hi Neo ,
You can use Function module  'SO_OBJECT_SEND' from your BO Method.
  For this Function module to work Email configuration should be done for 
  external  addresses..Please check with your Basis team for necessary config.
Thank you
Srinivas

Similar Messages

  • HT4519 can't send mail with yahoo in wifi mode

    can't send mail with yahoo in wifi mode only
    I receive this message ' appl.smtp.mail.yahoo.com' expired
    I have deleted my account and recreated. Same problem

    Nevermind...used my isp's outgoing mail server and it worked...
    -Ed

  • I can't send mail using yahoo?

    i can't send mail using yahoo?

    Are you using BT-Yahoo or just Yahoo?
    If you have been using BT-Yahoo, note that they have, in 2014, changed some users to BT mail through My BT and no longer use Yahoo - see BT Help online

  • Can't Send Mail with Yahoo POP

    Using mail program off of Panther and can recieve mail but can't send it. The error message I get is:
    "This message could not be delivered and will remain in your Outbox until it can be delivered.
    The sender address (my email address) was rejected by the server."
    I contacted yahoo and they said it was a problem with the apple mail client configuration.
    Please help!
    Thanks,
    Ed

    Nevermind...used my isp's outgoing mail server and it worked...
    -Ed

  • RE: Can't send mail with iCloud from Mac

    OK so you have made everyone using a mobileme account switch to iCloud-  I still use the mail icon on my Macbook Pro and every now and then
    the server quits and does not allow me to send emails.  I run the server doctor and only my address gets the green light.  The smtp.me.com: my username
    is always red.  I have checked my user name and made sure my password is correct and still I m locked out of sending emails.  I have time sensitive work that I need to send it to clients and there is nothing more frustrating than having to tell a client, I can't send an email right now.  What can be done for this. 
    Here is what the details have to say:
    CONNECTED Nov 15 22:11:25.456 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    CONNECTED Nov 15 22:11:25.501 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd63276c70
    READ Nov 15 22:11:25.554 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    220 asmtpout026.mac.com -- Server ESMTP (Oracle Communications Messaging Server 7u4-23.01(7.0.4.23.0) 64bit (built Aug 10 2011))
    WROTE Nov 15 22:11:25.584 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    EHLO [10.0.1.4]
    READ Nov 15 22:11:25.687 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    250-asmtpout026.mac.com
    250-8BITMIME
    250-PIPELINING
    250-CHUNKING
    250-DSN
    250-ENHANCEDSTATUSCODES
    250-EXPN
    250-HELP
    250-XADR
    250-XSTA
    250-XCIR
    250-XGEN
    250-XLOOP 29D2C3CB10528E4A901ADA1FF9173EF9
    250-STARTTLS
    250-AUTH PLAIN LOGIN
    250-AUTH=LOGIN PLAIN
    250-ETRN
    250-NO-SOLICITING
    250 SIZE 0
    WROTE Nov 15 22:11:25.691 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    STARTTLS
    READ Nov 15 22:11:25.746 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd63276c70
    * OK iSCREAM ready to rumble (1F4302+:16701)
    WROTE Nov 15 22:11:25.752 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd631545b0
    1.33 CAPABILITY
    READ Nov 15 22:11:25.804 [kCFStreamSocketSecurityLevelNone]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    220 2.5.0 Go ahead with TLS negotiation.
    READ Nov 15 22:11:25.825 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd631545b0
    * CAPABILITY st11p00mm-iscream017.mac.com 1F4302+ XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN
    1.33 OK !!
    WROTE Nov 15 22:11:25.985 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd631545b0
    2.33 AUTHENTICATE ATOKEN MjA0MzExOTMyADIwNDMxMTkzMgBBUUFBQUFCT3d6ZnQ0RVlrUDZ3V3c4TVZYcFQwK1NicDBIY2FvVkE 9
    WROTE Nov 15 22:11:26.196 [kCFStreamSocketSecurityLevelTLSv1SSLv3]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    EHLO [10.0.1.4]
    READ Nov 15 22:11:26.302 [kCFStreamSocketSecurityLevelTLSv1SSLv3]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    250-asmtpout026.mac.com
    250-8BITMIME
    250-PIPELINING
    250-CHUNKING
    250-DSN
    250-ENHANCEDSTATUSCODES
    250-EXPN
    250-HELP
    250-XADR
    250-XSTA
    250-XCIR
    250-XGEN
    250-XLOOP 29D2C3CB10528E4A901ADA1FF9173EF9
    250-AUTH PLAIN LOGIN
    250-AUTH=LOGIN PLAIN
    250-ETRN
    250-NO-SOLICITING
    250 SIZE 0
    WROTE Nov 15 22:11:26.309 [kCFStreamSocketSecurityLevelTLSv1SSLv3]  -- host:smtp.me.com -- port:25 -- socket:0x7fdd620ef180 -- thread:0x7fdd6218a0e0
    QUIT
    READ Nov 15 22:11:26.522 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd631545b0
    2.33 OK User adnohcs logged in 335182
    WROTE Nov 15 22:11:26.529 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd6218a0e0
    3.33 CAPABILITY
    READ Nov 15 22:11:26.697 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd6218a0e0
    * CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE
    3.33 OK Completed
    WROTE Nov 15 22:11:26.706 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd6218a0e0
    4.33 ID ("name" "Mac OS X Mail" "version" "5.1 (1251.1)" "os" "Mac OS X" "os-version" "10.7.2 (11C74)" "vendor" "Apple Inc.")
    READ Nov 15 22:11:26.912 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd6218a0e0
    * ID NIL
    4.33 OK Completed
    WROTE Nov 15 22:11:26.920 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd6218a0e0
    5.33 LIST "" ""
    READ Nov 15 22:11:27.093 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd6218a0e0
    * LIST (\Noselect) "/" ""
    5.33 OK Completed
    WROTE Nov 15 22:11:27.103 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd621df3b0 -- thread:0x7fdd6218a0e0
    6.33 LOGOUT
    CONNECTED Nov 15 22:12:20.509 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd61f36ff0
    READ Nov 15 22:12:20.724 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd61f36ff0
    * OK iSCREAM ready to rumble (1F4302+:31530)
    WROTE Nov 15 22:12:20.734 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623e2220
    1.34 CAPABILITY
    READ Nov 15 22:12:20.796 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623e2220
    * CAPABILITY st11p00mm-iscream023.mac.com 1F4302+ XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN
    READ Nov 15 22:12:20.804 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623e2220
    1.34 OK !!
    WROTE Nov 15 22:12:20.978 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd6227e390
    2.34 AUTHENTICATE ATOKEN MjA0MzExOTMyADIwNDMxMTkzMgBBUUFBQUFCT3d6ZnQ0RVlrUDZ3V3c4TVZYcFQwK1NicDBIY2FvVkE 9
    READ Nov 15 22:12:21.493 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd6227e390
    2.34 OK User adnohcs logged in 335037
    WROTE Nov 15 22:12:21.503 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623e2220
    3.34 CAPABILITY
    READ Nov 15 22:12:21.658 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623e2220
    * CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE
    3.34 OK Completed
    WROTE Nov 15 22:12:21.670 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623b1870
    4.34 ID ("name" "Mac OS X Mail" "version" "5.1 (1251.1)" "os" "Mac OS X" "os-version" "10.7.2 (11C74)" "vendor" "Apple Inc.")
    READ Nov 15 22:12:21.815 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623b1870
    * ID NIL
    4.34 OK Completed
    WROTE Nov 15 22:12:21.826 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623e2220
    5.34 LIST "" ""
    READ Nov 15 22:12:22.060 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623e2220
    * LIST (\Noselect) "/" ""
    5.34 OK Completed
    WROTE Nov 15 22:12:22.073 [kCFStreamSocketSecurityLevelNegotiatedSSL]  -- host:p99-imap.mail.me.com -- port:993 -- socket:0x7fdd6330d8d0 -- thread:0x7fdd623e2220
    6.34 LOGOUT
    maybe you can figure out why I can't send any email and possibly help me to fix the problem.  I m not a fan of iCloud it has been nothing but a headache and I am tired of having to put my clients off.  I am loosing money thanks to all of this.
    Sweeney Graphics

    It's a bad idea to post your email address - it's an invitation to spam - and I've aasked the Hosts to remove it.
    The first thing to try would be to sign out in System Preferences>iCloud, then sign back in again and check 'Mail' and any other data types you need in the list. This will set Mail up, hopefully correctly.
    If you are still having problems accessing or sending mail go to http://appleid.apple.com and change your password, making sure that it complies with Apple's requirements: at least eight characters, of which at least one must be a numeral and one a capital letter.
    Note that iCloud does not interact with any other email service. You cannot use it to check other email accounts, and you cannot send using its smtp server with any address other than your @me.com one as the 'From' address.
    You should be able to set up other accounts separately in the Mail application: these would be unaffected by iCloud in any way.

  • Z10 can't send email with ActiveSync from work Outlook webmail

    First off, love my Z10. It was able to connect to my work's Outlook webmail with no problem. I am able to get calendar and work emails.
    HOWEVER, I can't seem to be able to send email through my work account. When sending an email, I keep getting this red wrong way icon with the message:
    Message Status: Acknowledgement for send was not received from Server.
    What's wrong?
    I checked through my Outlook web account and it shows my phone within Mobile Phone Details:
    Access state: Access Granted
    Policy applied: Default - Applied in full
    ActiveSync version: 14.0
    Is there something I need to ask my IT staff for?
    Thanks.

    DueNorth wrote:
    First off, love my Z10. It was able to connect to my work's Outlook webmail with no problem. I am able to get calendar and work emails.
    HOWEVER, I can't seem to be able to send email through my work account. When sending an email, I keep getting this red wrong way icon with the message:
    Message Status: Acknowledgement for send was not received from Server.
    What's wrong?
    I checked through my Outlook web account and it shows my phone within Mobile Phone Details:
    Access state: Access Granted
    Policy applied: Default - Applied in full
    ActiveSync version: 14.0
    Is there something I need to ask my IT staff for?
    Thanks.
    It appears as if your email is running on Exchange 2010, and if so then you can troubleshoot this issue yourself to see if your phone is even talking to your ActiveSync server when it is trying to send the emails. If something doesn't jump out at you during this process, this information should help your IT folks in troubleshooting the effort.
    http://blogs.msdn.com/b/mstehle/archive/2013/04/29/howto-visual-guide-to-turn-on-exchange-activesync...
    You can also test the full functionality of ActiveSync on your account by using Microsoft's following testing tool, which should point out any major issues:
    https://www.testexchangeconnectivity.com/
    In regards to your question about what to ask your IT staff for, as an Exchange engineer myself I don't think there is anything on the server side that would let you connect and download email but not send it. So I would want to see the logs mentioned above to see what was going on with the device to server connectivity, in conjunction to the error message you already grabbed.
    There are some random "fixes" on the Internet such as this one which would be a server side configuration change, but again the more information you can supply your IT folks the better:
    http://forums.crackberry.com/blackberry-10-os-f269/bb10-exchange-activesync-issue-775934/

  • Can't send mail when away from home

    10.5.2
    I can't get my MacBook Pro to send email when I'm away from home but the connection doctor says it is connected to all of the smtp servers in my mail accounts.
    Any help will be greatly appreciated.

    Most, if not all ISPs, block the use of SMTP servers that are outside of their network (or not provided by the ISP being used for your internet connection) on Port 25. Some ISPs allow the use of an authenticated SMTP server only that is outside of their network, but some block all available ports that can be used with an SMTP server that is outside of their network.
    These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.
    Earthlink has an authenticated SMTP server, as does a .Mac account, so you should be able to send messages with your Earthlink and .Mac accounts when connected to different ISPs. If not and you are using 25 for the SMTP server port for these SMTP servers, try using 587 for the SMTP server port instead for each.
    You can only use the .Mac authenticated SMTP server to send messages with a .Mac account, but it should be possible to use Earthlink's authenticated SMTP server to send messages with any account.
    If the ISP you are using for your internet connection is very restrictive in this regard, there isn't much you can do except for contacting the ISP being used for their requirement when using an SMTP server that is outside of their network, or send via webmail access for the account using a browser.

  • Since the end of November, I can't send mail via Hotmail from Mail.

    I have had my Hotmail account set up in Mail for a number of years and it has been working fine. Suddenly, since the end of November, I can only receive emails but not send. If I try to send it says 'connections to the "smtp.live.com" server timed out'.
    I have tried specifying different ports, erasing and re-setting up the account - nothing has worked. Please can someone help?

    Did you set up your SPF record in your DNS? If not you can find more info about that here
    http://www.openspf.org/
    Something like this is what you'll probably need
    "v=spf1 a mx"
    Good luck

  • Can't send mail out of my iPad and iPhone using my office work mail account.

    I can't send mails out of my work mail account on IPad or iPhone. I usually get error message that the server does not accept relay messages. I only get this problem on IOS devices only but on other platform I don't . Please can anyone help fix this?

    Hi there Stonecold2323,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    -Griff W. 

  • Suddenly can't send mail

    I have often received the alert box that the selected server can not send the mail and I have to change the server,or wait, or restart mail to get it to work. This is annoying, but I have dealt with it (although I'd like to know what's going on). But, now, it seems I can't send mail at all, from any server, with a restart or otherwise. It's been happening for the last day.
    Can anyone lend a hand? Is it a problem with Apple? I've chosen a variety of different servers (I have many e-mail accounts set up). I've relaunched. Tried to send from various e-mail addresses (although my .mac is my default). No luck.
    Thanks for the help,
    J.

    We have the same problem here and for a few weeks we've resorted to signing in to a browser email program as mac mail's password isn't recognized by the server.

  • Send mails to Agents from Infotype 105  External mails / SAP Inbox

    Hi,
    1) Whenever there is a change in the Address  the change has to be notified to HR Business partner (HRBP)  and Manager (MGR)
       a) The mail has to be  sent to the Extermail id.
       b) OR it has to be sent to the SAPID (Inbox)
    2) These mail ID /SAPID will be taken from the INFOTYPE PA0105, where two custom fields will carry this Mail / SAPIDs
    3) Sending mail To external mail id  is been done using the Function module in  the rule (Inside the function module i have written a program which will collect the mail id from PA0105 and send mails)
    4) Huv can i send mail to SAPINBOX from there if i  have SAPID instread of external mail IDs.
    Please help me to solve .
    Richard A

    Check the Business Object that is relevant to you
    ADDRESS    Address for sending documents
    ADDRESSEMP Employee Address
    BUS4001    Addresses of companies and organizations
    BUS4002    Address of natural oerson
    BUS4003    Address of "Person in company"
    After selecting the Business object check which event is getting triggered when you change address. If no event getting triggered try toi configure in SWEHR3
    You can take reference of the following Wflow Template
    01000015
    01000080
    You can just use SAP User Id in mail if email address is maintained in SU01d.
    <b>Reward points if useful and close thread if resolved</b>

  • I had an imap account in my iPad and my iPhone 4. They worked just fine till about Christmas. They act like they are checking the mail and it shows there is mail to come in, but it just goes back to saying checking mail.  Can't send mail either.

    I had an imap account in my iPad and my iPhone 4. They worked just fine till about Christmas. They act like they are checking the mail and it shows there is mail to come in, but it just goes back to saying checking mail.  Can't send mail either.

    Update to above question:
    Hello All,
    To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
    Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
    Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
    Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
    When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
    All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
    So this fix worked for me.
    After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
    I hope this works for you on YOUR Apple devices.
    Bob

  • Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!! :(

    Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!!

    Hi
    You need to check with your ISP whether or not the send mail server (SMTP) requires a password.  Some do, but many do not.  When you know the correct password to send mail, then you need to tell Mail as follows:
    Mail menu > Preferences > Accounts > Select the account
    Click on the Outgoing Mail Server (SMTP) combo box, and select Edit SMTP Server List...
    In the Account Information tab put the server name
    In the Advanced Tab, set up the authentication information from your ISP.
    Good luck
    Bob

  • I can't send mails from my outlook 2010 but can receive, I can't send mails from my outlook 2010 but can receive

    I can't send mails from my outlook 2010 but can receive, please help.

    Thank you so much for your time and help Csound1 I really appreciate it.
    Mac mail works perfectly fine so I don't want to screw it up by altering anything there.
    However, I've checked to make sure I didn't miss anything on Outlook, but it still won't send messages. I don't know if I need to fill the "Unqualified domain" field?

  • Can receive but can't send mail via BT Yahoo SMTP server port 995

    Suddenly I can't send mail from my BT/Yahoo account but can still receive mail. The message that i get is that it was rejected by the server. I have not changed the server - it is still SMTP via port 995, using SSL. Help!! Why should this have ocurred out of the blue and what do I do?

    Hi Dancing Brave,
    Thanks for visiting Apple Support Communities.
    I recommend starting with the steps in this article if you are not able to send mail:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Best,
    Jeremy

Maybe you are looking for