Can I swap all tags between two songs?

I downloaded a compilation album but the songs are all mislabeled -- all of the info for song 1 belongs to, say, song 7, and all of the info for song 7 belongs to song 5, and all of the info for song 5 belongs to song 13.... Since it's a compilation album, there are a lot of tags that I would need to edit to correct this (name, year, track number, artist, composer, etc.). Is there a way to swap *all* tags between two songs? Even better, is there a way to edit the library info using some sort of text editor instead of the GUI? Thanks.
- mb

Just change the track numbers... Line them up in song name order so they don't jump about as you edit things.
I have scripts for similar tasks within the same file, e.g. swapping track name with artist, at http://samsoft.org.uk/iTunes/scripts.asp.
tt2

Similar Messages

How can I remove all content between two tags using Find/Replace regular expressions?

This one is driving me bonkers... I'm relatively new to regular expressions, but I'm trying to get Dreamweaver to remove all content between two tags in an XML document. For example, let's say I have the following XML:
<custom>
<![CDATA[<p>Some text</p>
<p>Some more text</p>]]>
</custom>
I'd like to do a Find/Replace that produces:
<custom>
</custom>
In essence, I'd like to strip all of the content between two tags. Ideally, I'd like to know how to strip the CDATA content as well, to return the following:
<custom>
<![CDATA[]]>
</custom>
I'd much appreciate any suggestions on accomplishing this.
Many thanks!

Thanks much for your response. I found David's article to be a little thin with respect to examples using quantifiers in coordination with the wildcard metacharacters; however, I was able to cobble together a working expression through trial and error using the information he presented. For posterity, here’s the solution:
Find:
<custom>[\d\D]*?</custom>
Replace:
<custom>
<![CDATA[]]>
</custom>
I believe this literally translates to:
[] = find anything in this range/character class
\d = find any digit character (i.e. any number)
\D = find any non-digit character (i.e. anything except numbers)
*? = match zero or more times, but as few times as possible (i.e. match multiple characters per instance, but only match one instance at a time, or none at all)
I’m still not sure how to effectively utilize the . wildcard. For example, the following expression will not find content that ends with a number:
<custom>.*?[\D]*?</ custom >
I'm presuming this is because numbers aren't included in the \D metacharacter; however, shouldn't numbers be picked up by the .*? expression?

Can I swap the harddisks between a new MacBook Air and a MacBook 2009?

Can I swap the harddisks between a new MacBook Air and a MacBook 2009?
I want to buy a MacBook Air and give my MacBook to my wife but
I want to keep all my files, itunes libraries, user accounts, etc.
Will the new Mac Book Air detect the new hardware and install the new
drivers by itself?

Hi uni2canarias and welcome to Apple Discussions!
The hard drive in the MacBook Air is not meant to be user replaceable. Further, the OS installed on your MacBook would likely not run the MacBook Air.
A better solution might be to use the Migration Assistant to move your data to the new computer. This comes up when you are setting up the new computer for the first time.
Best of luck.

Beep tone between two songs

Hi, my new iPod classic plays a beep tone between two songs. How can I switch off this tone?
Cheers
Andreas

If you haven't try the 5Rs
Do a iPod Hard Reset -
Press Menu and center buttons simultaneously for about 10 secs till the Apple logo comes on, then release the buttons
Select your preferred language.
See this the Apple Support Article for 5Rs.
http://www.apple.com/support/ipod/five_rs/classic/
Have a nice day!

Hello, my iTunes dates are crashed on my mac, how can I download all my itunes match songs and save on my mac?

Hello, my iTunes dates are crashed on my mac, how can I download all my itunes match songs and save on my mac?

Hi mrmoo13!
You have a couple of options for transferring your music library from one computer to another. First, you can download all of your music that is stored in the cloud on iTunes Match by following the instructions on this page:
iTunes 11 for Mac: Access all your music anytime, anywhere with iTunes Match
http://support.apple.com/kb/PH12284
You can follow steps listed in the section right here:
Play or download songs from iCloud
You can play songs directly from iCloud, or you can download songs so you can play them when you’re not connected to the Internet.
If a song is available in iCloud, it has a Download button next to it.
To play the song, double-click it.
To download the song, click the Download button.
After you download a song to a computer, it remains in the computer’s iTunes library, even if you turn off iTunes Match.
To only display downloaded songs in your iTunes library, choose View > Hide Music in the Cloud. This also hides any previous iTunes Store purchases you haven’t downloaded.
For information about downloading and playing songs on an iOS device, see the documentation for the device.
In order to make it easier to download all of your music, you can highlight all of the songs in your iTunes Match section and then click download, as mentioned in these instructions.
You can also choose to transfer the music from your old computer to the new one by following the steps in this article, whcih will give you some other options for doing this transfer:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How can I change "All Inboxes" to two seperate inboxes.

How can I change "All Inboxes" to two seperate inboxes. My emails from two seperate accounts are merged in one inbox.

In the Mail app, tap on the Mailboxes in the top left of the screen.
That will show you all your accounts Inboxes
Hope that helps.

MacBook Pro: Swapping Hard Drives Between Two Identical Macs?

I have two Macbook Pro notebooks. They are both the June 11th 2012 models both with cd/dvd drives. They both have Mavericks installed on both.
I want to give my 15 inch to my son who has the 13 inch. They 13 will be mine and the 15 his.
Can i just swap his 750HD from the 13 and put it into the 15? Can i also remove my 250 Samsung pro SSD from my 15 and put it in his 13?
What are some ways i can go about this that are easy?
Thanks in advance,
PS: Like i said they both run mavericks and they are the same generation MBP from June 2012 release from Apple. Except one is a 2.5 i5 13 inch and the other is a 15 inch 2.3 Quad i7.
We pretty much just want to trade laptops and swap the hard drives easy.
Thanks again.

nn007400,
are each of your laptops associated with your respective Apple IDs? If so, then that might be a fly in the ointment when it comes to updating apps purchased through the Mac App Store, if the tie-in involves your MacBook Pros’ serial numbers as well as your Apple IDs. (I don’t know whether that’s the case or not.)
The disks can certainly be exchanged physically between the two portables — you could try it for a while, and if you encounter a problem, you can exchange them back and consider alternative (but unfortunately less convenient) approaches.

All Dates between two given Dates

Hi,
I need all the dates between two given dates in select-options .
For example the range in select-options is 01/01/2007 - 31/03/2007 .
I need all the dates between the two given dates .
How can i do this .Is there any FM for this ?
Regards,
Zia

use this
CSCP_PARA1_GET_PERIODS
data:begin of daytab occurs 0.
        include structure scscp_period_str.
data:end of daytab.
call function 'CSCP_PARA1_GET_PERIODS'
    exporting
      i_datuv    = r_budat-low
      i_datub    = r_budat-high
      i_timeunit = 'D'
    tables
      et_dates   = daytab.
here u have to put one more logic.
   loop at daytab where datuv in r_budat.
    endloop.
So u will get all the dates
Regards
prabhu

How can I share Pin variable between two packages?

Hi every one,
Is there any one who knows how can I share Pin variable that it is defined with OwnerPin between two packages in java card( with eclipse 3.1),I studied Sharing Interface subject and I knows it teorical but I can not do it practical .
I can share primitive data type but I can not share Ownerpin.
If anybody has some sample codes or knows any link ,please inform me.
My code is same as below:
//In Server Side
package ginaPack;
import javacard.framework.*;
public class GinaApplet extends Applet implements GinaInterface{
OwnerPIN pin;
private GinaApplet (byte[] bArray,short bOffset,byte bLength) {
    pin =new OwnerPIN(PIN_TRY_LIMIT,MAX_PIN_SIZE);
          byte PinTemp[] = new byte[4];
          PinTemp[0] = (byte) 0x31;
          PinTemp[1] = (byte) 0x31;
          PinTemp[2] = (byte) 0x31;
          PinTemp[3] = (byte) 0x31;
          pin.update(PinTemp, (short) (0), (byte) PinTemp.length);
    public Shareable getShareableInterfaceObject(AID clientAID,byte parameter)
          return this;
    public OwnerPIN getPinShareable()
         return pin;
     public void process(APDU apdu)
                  //there are some codes in this here
}//Interface in Server side
public interface GinaInterface extends Shareable
      public OwnerPIN getPinShareable();
}//In Client side
import ginaPack.*;
public class UserCardApplet extends Applet {
private UserCardApplet(byte[] bArray, short bOffset, byte bLength) {
     //there are some codes in this here
public boolean select() {
          final byte[] Gina_AID={(byte)0x47,(byte)0x69,(byte)0x6e,(byte)0x61,(byte)0x41,(byte)0x70,(byte)0x70,(byte)0x6c,(byte)0x65,(byte)0x74};
          AID GinaAID = JCSystem.lookupAID( Gina_AID, ( short )0,( byte )Gina_AID.length );
          if ( GinaAID == null ) // probably not loaded on card
                    ISOException.throwIt( ISO7816.SW_FUNC_NOT_SUPPORTED );//6a 80
          GinaInterface ff = (GinaInterface) JCSystem.getAppletShareableInterfaceObject(GinaAID,(byte)0);
          if( ff == null )
               ISOException.throwIt((short)0x0903);
if ( ff.getPinShareable().getTriesRemaining()== 0 ) return false;
}My problem is in this line :
"if ( ff.getPinShareable().getTriesRemaining()== 0 ) return false; "when I select my applet this line throw an exception, ff.getPinshareable includes all of OwnerPin methods(such as getTriesRemaining ,check ,reset, update ,...)but all of them throw exception .
I think firewal does not allow other packages uses this methods .If my guess is right then what should I do for sharing the variables that they are defined with non primitive data type such as (OwnerPin,Signature,...)
I'd appriciated for any help.
yours sincerely,
Orchid.
Message was edited by:
NewOrchid

Applet 1:
package com.package1;
import javacard.framework.*;
public class Applet1 extends Applet {
    private static final byte tryLimit = (byte)3;
    private static byte[] pinBytes = {(byte)1, (byte)7, (byte)4, (byte)5, (byte)2};
    private Library1 lib;
    protected Applet1(byte bArray[], short bOffset, byte bLength) throws PINException {
        lib= new Library1(tryLimit, (byte)pinBytes.length);
        lib.update(pinBytes, (short)0, (byte)pinBytes.length);
        register();
    public static void install(byte[] bArray, short bOffset, byte bLength) {
        new Applet1(bArray, bOffset, bLength);
    public void process(APDU apdu) {
        byte status=(byte)0;
        lib.resetAndUnblock();
        if (!(lib instanceof Shareable)) status += (byte)2;
        if (!(lib instanceof MyPIN)) status += (byte)4;
        ISOException.throwIt(Util.makeShort((byte)0x90, status)); // sw indicates tries remaining
    public Shareable getShareableInterfaceObject(AID cltAID, byte parm) {
        return lib;
}Library1:
package com.package1;
import javacard.framework.OwnerPIN;
import javacard.framework.PINException;
public class Library1 extends OwnerPIN implements Interface1{
    public Library1(byte tryLimit, byte maxPINSize) throws PINException {
        super(tryLimit, maxPINSize);
}Interface1:
package com.package1;
import javacard.framework.PIN;
import javacard.framework.Shareable;
public interface Interface1 extends Shareable {
    boolean check(byte[] pin, short offset, byte length);
    byte getTriesRemaining();
    boolean isValidated();
    void reset();
}Applet2:
package com.package2;
import javacard.framework.*;
import com.package1;
public class Applet2 extends Applet {
    private final static byte CLA_TEST = (byte)0x80;
    private final static byte INS_TEST = (byte)0x20;
    private final static byte P1_AUTHORIZE = (byte)0x00;
    private final static byte P1_DOIT = (byte)0x01;
    private final static byte P1_CHECK_SIO = (byte)0x0a;
    private Interface1 sio;
    protected Applet2(byte bArray[], short bOffset, byte bLength) {
        register();
    public static void install(byte[] bArray, short bOffset, byte bLength) {
        new Applet2(bArray, bOffset, bLength);
    public void process(APDU apdu) {
     byte[] buffer = apdu.getBuffer();
        if ((buffer[ISO7816.OFFSET_CLA] == CLA_TEST) ||
            (buffer[ISO7816.OFFSET_CLA] == ISO7816.CLA_ISO7816)) {
            short bytesReceived = apdu.setIncomingAndReceive();
            switch (buffer[ISO7816.OFFSET_INS]) {
            case ISO7816.INS_SELECT:
                if (!JCSystem.getAID().equals(buffer, ISO7816.OFFSET_CDATA, buffer[ISO7816.OFFSET_LC]))
                    ISOException.throwIt(ISO7816.SW_APPLET_SELECT_FAILED);
                sio = (Library1)JCSystem.getAppletShareableInterfaceObject(JCSystem.lookupAID(<fill in parameters>);
                if (sio == null)
                    ISOException.throwIt(ISO7816.SW_CONDITIONS_NOT_SATISFIED);
                break;
            case INS_TEST:
                switch (buffer[ISO7816.OFFSET_P1]) {
                case P1_AUTHORIZE:
                    if (!sio.isValidated()) {
                        if(!sio.check(buffer, ISO7816.OFFSET_CDATA, buffer[ISO7816.OFFSET_LC]))
                            ISOException.throwIt(Util.makeShort((byte)0x9A, sio.getTriesRemaining()));
                    break;
                case P1_DOIT:
                    if (!sio.isValidated())
                        ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
                    sio.reset();
                    ISOException.throwIt(Util.makeShort((byte)0x9A, sio.getTriesRemaining()));
                    break;
                default:
                    ISOException.throwIt(ISO7816.SW_INCORRECT_P1P2);
                break;
            default:
                ISOException.throwIt(ISO7816.SW_INS_NOT_SUPPORTED);
        else {
            ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
}1. Upload package1
2. Install Applet1
3. Select Applet1
4. Upload package2
5. Install Applet2
6. Select Applet2

Stuck between two songs.

Hello.
My iPod keeps getting stuck in between these two songs. It's the same ones every time; the last two. When I listen to one of those (last or second to last) it acts as if only those two songs are on the iPod. Like if I wanted to hear the last song, then the first, and I listened to the last, it wouldn't move onto the first, it goes to the second to last one. And even if I press the forward button (or backwards button) 10 times in a row, it doesn't usually do anything; just keeps switching between the two. I've tried taking the songs off and putting them back on. Thank you!
*I can eventually get it to move on if I play around with it, switching it off, pressing the forward/backward buttons a lot.
Windows XP

Resetting your iPod will probably fix the problem.

How can I retrieve all of my Itune songs back?

I reccently had my computer re-booted because it was freezing a lot so they restored my computer like new. The bad thing about that is that all of my itune songs are gone now and when i plugged in my ipod it deleted them as well.If there is any way that you can please plaese help me get these songs back i'd been more than thankful.

If you didn't make a back-up of your music/movie purchases to restore from (as you are advised to do) then I'm sorry to say that the policy on lost purchases is that you have to pay to download them again:
"Products may only be downloaded once; after being downloaded, they cannot be replaced if lost for any reason. Once a Product is purchased or rented (as applicable) and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage" iTunes Store: Purchased content can be downloaded only once
Purchased applications can be downloaded over again, see this article for details: How to redownload purchased applications from the App Store
Failing this, you could try contacting iTunes Store Customer Service and you might be able to persuade them to sanction a second free download. There have been occasional reports in the iTunes forum of this happening, however just be aware that they are not under any obligation to do so. If you click on this link it'll take you to the support/contact page: Customer Service - iTunes Store Support
You might also want to check out these pages for future reference:
How to back up your media in iTunes
Back up your iTunes library by copying to an external hard drive

How can I transfer all my files and songs on my iPod to my computer?

I recently got a new computer and all my old files and songs were lost with this new computer. I still have everything saved onto my iPod, but I'd like to take all these files and songs and save them into my computer, or atleast my iPod library. Is this possible? And even if I don't, if I add new files and songs, will all the old ones be replaced?
Video iPod Windows XP

Hi alicekat,
You can find a ''HIDDEN'' document In the iPod that contains all the Song files that has been copied on Your iPod. To This HIDDEN FILE you will have to go ''DOCUMENT OPTIONS'' then you select the second bar and You choose''SHOW HIDDEN...''. Then You find Your iPod in the ''MY COMPUTER'' and open the New Document that appeared. You Choose ''CONTENT'' then ''MUSIC'' and You Simply Drag and drop every F'' into iTunes music Library.
Your songs will be all on Your iTunes .
Good Luck..
Marc larouche

How can i remove all of the purchased songs from my phone?

I want to remove all of the purchased songs from my phone, but I'm not having any success. I've transferred the purchases to iTunes, and turned off the cloud on my phone, but they are still there. They will not let me delete them...

Roy631 wrote:
They go away until the next sync and then they return to the list. They are shown in iTunes greyed out with a broken circle in the first column when manually viewing them.
It's an iPhone 5S, I'm running the latest OS, 8.1.
OK, maybe time to get extreme. I've had similar experiences, sometimes occurring after making direct-to-device purchases and sometimes after doing an iOS update. In the two times I've experienced what you've seen I've fixed it by digging deeper, bear with me:
If your iPhone is not set for manual management, do so. (i.e. select "Manually manage music and video")
While connected to iTunes, navigate the contents of the iPhone. Select all songs and delete them. Ignore the gray ones if still present.
Eject the iPhone and go to Settings/ General/ Usage/ Manage Storage. Let the list populate then select the Music category. In the next screen, swipe across "All Songs" from right to left and tap Delete.
Connect back to iTunes, perform a backup, then restore the iPhone and reload the backup.
Your iPhone should now have its settings, accounts, and apps back, but no music -- not even the "ghost" entries. Add the music back that you want, either via manually dragging and dropping from iTunes, or auto-syncing all or a portion of your library.
Some people reported luck with just step #3. The problem I've had with that, is any music that I want remaining on the iPhone gets corrupted, such that playback will skip and/or show the wrong artwork. By deleting all music first, then following up with a restore, that seems to clear the problem. Personally I avoid direct-to-device purchases since I've had spooky occurrences almost every time where the purchases are very difficult to remove.

How can i set the space between two button?

Hello,
I have
<mx:HBox>
<mx:Button label="one" />
<mx:Button label="two" />
</mx:HBox>
how can i set the distance between this two compotents?
Thanks

quote:
Originally posted by:
robinbouc77
Hi,
you can use horizontalGap property on HBox to change the
space between your buttons. I think the default value is 6. You can
also use <mx:Spacer/>, but changing the gap on HBox is
probably the cleanest way ;)
C U
perfect!!! works fine

Can I sync iphoto library between two Mac's?

I have two Macs (an iMac and a Macbook Pro) and want to sync the iPhoto (6.0.6) library between the two so whenever I change one the other is updated. I thought about using iDisk but my library is apx 5gb. I am new to Macs- is there a utility built into OSX 10.4.9 or hopefully some freeware or very-cheap ware... preferably automated. Thank you very much.

brettjbyers
No you cannot sync an iPhoto library between two macs. If you do you will corrupt the iPhoto Library file. iPhoto is a consumer level app, and this feature is not supported.
What you can do is share the photos but not the library. Each machine will need to have it's own library file.
The easiest way to do it this is to enable sharing (in the iPhoto Preferences) on both machines (one sharing the library, the other looking for the share). When you do this the shared library will appear in the Source (or left-hand) pane and pics can be dragged from that to the library in the other machine.
Regards
TD

Can I swap all tags between two songs?

Similar Messages

Maybe you are looking for