Can I use local SLD for each system?

Hi!
Our company is a big SAP outsourcing with hundreds of SAP systems.
We plan to use the local SLD for each new system (>640).
Is this a possible and good solution?
Point guaranteed.

Jenni,
Please have a look at the below doc on how to place SLD in your landscape, its worth reading and you can decide your dimensions of placing the SLD.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/29b1f3ea-0c01-0010-2dae-cc64bb381c97
Best regards,
raj.

Similar Messages

Can I use the LCDS for... ?

Hi,
I'm a beginner in LCDS.
I have a MySQL database for my ordering system. In this database there is a user table and there are some other tables. These tables use foreign keys of user.id. People can register on my sytem (+1 row in a user table). I communicate throught web services in my mobile application. People can see only their own rows (own orders) (it is defined by the user.id).
I would like to improve my mob.app. with offline, sync, and real time changings features.
Can I use the LCDS for my system?
Thanks

+information:
Server: Apache Tomcat 7
Web Services: Java WS, and it is protected with Custom Basic Authentication. The session contains user.id after the successful authentication.

In Bte can i use same Product for 2 different process

in Bte can i use same Product for 2 different process

hi
as per i know yes but since there r two type of interface behaviour is defferent .
For
Publish & Subscribe interfaces
if any event occur in this type both the process can work simultaneously and they will not intervene each other
whereas in
Process interfaces
at an time any one process can be active.
Reward if usefull
Cheers
Snehi

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

You can't use this mobile for Nokia Music Unlimite...

I have just purchased a Nokia 5130 XpressMusic mobile phone which came with music. I have previously had a similar phone which came with music which for the last year I have been using. That unlimited downloads has now expired.
So I have plugged in my new phone, which I have not used to purcahse any music with through my old unlimited downloads, and it is saying:
You can't use this mobile for Nokia Music Unlimited edition mobile.
Can someone please tell me why not? The phone is capable of playing music (it is an XpressMusic mobile). I have specifically gone and purchased this phone for the unlimited downloads and will not be very happy if I am unable to activate it.
Many thanks,
Tania

Hi Tania,
Like @petrib mentioned you should be able find local Nokia Care details behind that Contact us -link up right in this page (or if you tell which country you are in I can check the details for you).
You could also update to latest Nokia Music Player which has just become available e.g. here http://europe.nokia.com/support/product-support/nokia-music-support and see if activation would work with that.
-ThreeOs

Can i use oracle 8i for oracle 9ias application server ?

can i use oracle 8i for oracle 9ias application server for developing jsp applicationes?
can i run the oracle 8i data application with 9 ias oracle server?
can any one give suggetion?
pullareddy

Hi
Each time when you start your computer, you need to restart Oracle as well, its only with Windows XP. The process you have to follow each time is:
Start -->Run and then type CMD to open command prompt.
In command prompt type
svrmgrl and then press
connect internal/oracle and then press
startup force and then press
If you have any problem, then please email me, [email protected]
Goodluck

Need to change screen colours for each system in the landscape

hi ,
we are in need of having different themes for different systems in the landscape .
that is
if i click development system , the screen with 'theme1'
if i click quality system system , the screen with 'theme2'
if i click production system system , the screen with 'theme3'
how to configure this colour setting in accord to the system for all the users

Hi Susin,
You would do this by changing the parameter sapgui/theme for each system. It uses the Tradeshow theme by default as of Web AS 6.40. As long as the SAPgui itself is set to "System Dependant" then it should work fine.
Regards,
Nelis

Hi, what can i use location service for find my lost macbookAir

hi, what can i use location service for find my lost macbookAir

If you're an iCloud user and had "Find my Mac" enabled in the System Preferences, then you can go to www.icloud.com, sign in and click Find my iPhone.

How can utilize/use the extended space in system.img ?

Hello Guru's
In Oracle VM , How can utilize/use the extended space in system.img ?
a) Increased the system.img size using the following command:
# dd if=/dev/zero bs=1M count=12960 >> /OVS/running_pool/18_test1/System.img
b) Verified the added size of system.img file at OVS server.
# ls -lh System.img
-rw-r--r-- 1 root root 19G Feb 9 20:58 System.img
c) Started GVM and additional size/memory is not shown ?
# df -m
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/xvda2 3984 2292 1652 59% /
/dev/xvda1 92 12 75 14% /boot
tmpfs 512 0 512 0% /dev/shm
+ Tried working with resizefs , resize2fs , cmd did not work.
(GVM is created using Oracle provided template)
+ am i missing anything ?
Oracle VM Setup Detail:
oracle-logos-4.9.17-7ovs
enterprise-linux-ovs-5-0.17
ovs-release-2.2-0.17
ovs-utils-1.0-33
kernel-ovs-2.6.18-128.2.1.4.9.el5
ovs-agent-2.3-29
Thanks in advance for your help.
Best Regards
Basu

I am not positive what you did is going to work, but it seems like you did the equivalent of imaging a small disk on a bigger disk. In that case, the first thing to do is update the partition table with fdisk. Start with fdisk -l in the vm for general information about the disk. Hopefully, the additional space will show. Then, work with fdisk to use the extra space. The easiest is to add a partition, then a file system on it. It is also possible to expand the last partition (you might have to delete it first), then expand what is on it (may be RAID, LVM, or the file system), layer by layer. As usual with fdisk, you run the risk of thrashing it all, so you may want to practice on a copy first. Obviously, the extra space can only be added to the last partition of the small disk.
If the situation is more complex, you may have to boot a VM with both the small disk and the big disk at the same time. If you boot the VM off of an iso DVD image, you can then shell out, then run fdisk to partition the big disk the way you want, then use dd to copy the partitions you want in the order you want from the small disk. I am pretty sure not all combinations will work, but you get the idea. You can then take the small disk out, and boot off of the big disk.
Come to think of it, you might just be better off with adding more space as a second virtual disk. You would then be free to partition/format it the way you want without messing with the first disk. Linux is so good with disk management, so many options.
As a general statement, though, I like to put some distance between the high level file systems and the low level disk partitions, so I use LVM (Logical Volume Manager).
Best of luck, keep us posted.

Can I use full load for daily loads in LO Cockpit extraction.

I am using LO cockpit extraction for 2LIS_11_VAITM and i am using delta load for daily load and I have following doubt.
Can i use full load for daily loads instead of delta in LO Cockpit extraction.
Because, my understanding is that full load always takes data from setup tables in ECC and set up tables will not have delta data.
pls reply. Thanks.

You are right abt the understanding that full load (atleast for the extractor at hand) brings data from setup tables. You are also right that delta records are not loaded into setup tables.
So if you plan to do full loads every day, you have to load the setup tables everyday. It is at this juncture that I have to remind you that, filling of setup tables requires a downtime of the system to ensure that no changes / creates happen during the process.
Hence performing a full load is not a very good approach to go by...especially when SAP made the job easy by doing all the dirty work of identifying changes and writing them to extraction queue.
Hope this helps!

Can I use one account for both my labtop and my ho...

can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.

Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
Thanks

Sorry you get only one notification sound for all email accounts. you can send a suggestion to apple here http://www.apple.com/feedback/

Can I use touch ID for App Store without using a passcode?

It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??

From the article:
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting
and
You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
Regards,

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

Can I use local SLD for each system?

Similar Messages

Maybe you are looking for