Can I using Oracle Password filter without using DIP?

Hi expert,
Can I using Oracle Password filter without using DIP?
I installed OID 1.1.1.5.0 and AD MS 2008 + Password Filter without other configuration about DIP.
While Install password filter, I use 'sAMAccountName' as Source Attribute (Microsoft Active Directory) and 'orclSAMAccountName' as Target Attribute (Oracle Internet Directory) instead of using objectGUID.
My Scenario test
1. setup password filter follow by 20 Deploying the Oracle Password Filter for Microsoft Active Directory
2. create user in AD
3. create user in OID
4. reset password in AD
I found that it can't send password from AD to OID.
See log below
OID Base DN is ---->
dc=ksso,dc=com
About to retrive connection
Got the Connection
Inside Add Parent
About to add node
Node Added
retval is NOT success
Out of Add Parent
Domain String -->
KSSO.LOCAL
User Domain String -->
[email protected]
Inside OID Search User sgslodac
About to fire the search request
TEST BASE -->
dc=ksso,dc=com
Password Update Failed. No record to update
Search did not reterive any data
Writing data into persistence store
INSIDE IF PERSISTENT STORE
Inside sgsladds::sgslperwriteData YOOOO
Inside sgsladac c-tor
AD Host
10.20.5.60
AD Port
389
AD Base DN
DC=KSSO,DC=LOCAL
Only dataattribute
Got Registry enteries
contact
description
Got Entiredn
OU=orclpwfKSSO.LOCAL,DC=KSSO,DC=LOCAL
Encrypted record already exists in Datastore
Already Exists
Encrypted record already exists in Datastore
Already Exists
Inside sgsladdsSearchUser
Firing Search Request
AD search for a user objectGUID is successfull
Count success
Search result fetched
0:437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
Inside sgsladds::sgsladdsgetData NEW Look
0:437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
Encoded Data Extracted in sgsladdsgetData
437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
Moving out sgsladdsgetData
Encoded Data Extracted
437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
Incrementing the MAX_RETRY LIMIT:
1
numretries ======
1
Inside sgslcodsupdateChild
1:437 7 monsoft314 420 AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAlfdA8eazxkaNLy8BEBQHKgAAAAAmAAAAUABhAHMAcwB3AG8AcgBkACAARQBuAGMAcgBwAHQAaQBvAG4AAAAQZgAAAAEAACAAAAALknXvaho0gPrrP34AQqdBSMLHHcVupTrFuuN0lQdV0QAAAAAOgAAAAAIAACAAAAAKxX3FGNQ/lJBjETm3pRiveLFRiiCwxbrf3UNlQtk5C0AAAAC66Ip1jAzC6U1gTVP9LHETW1MwEfzxSXHcCny9wy7pFyDlLtmpnP1nGYUegAMxvJTu5yGmciBMmfZAgS1Oan3PQAAAAETSu3JcNAkdSqm2E1zxSWxClWrBid/eLHpbasjHo5cLgkGjzI6+UWNHzhfOf86wJ0uuex+++0ttFRzzMEf9atE=
Encrypted record data updated successfully
Inside sgsladac destructor
Inside sgslodac destructor
Inside sgsladac destructor
Password updation failed in child process
Moving out sgslpascsynchDataStoreWithOID
About to UNBIND datastore after processing the Records
Deleting datastore object pointer
***********Inside sgslldpcopenLDAPConnection****************
REG BASE Key ===
SYSTEM\CurrentControlSet\Control\Lsa\orclidmpwf\OIDConfig
OID Host Key
OIDHost
OID Host Value ====
Oracle.OID
am I missing something?
or this scenario can't work without DIP?
Thank you
Noraset,

Hi,
As yingkuan had provided nice link for understanding...
Why you od this doubt... Since, When you are holding two different Database, then you can carry out stream replicaiton, the bottom line is on the on two different DB's.. .still if they are on same host.. !!
- Pavan Kumar N

Similar Messages

Oracle Password Filter 10g (10.1.2.3)

Hello
I'm trying to set up password synchronization between Microsoft Active Directory 2003 and Oracle Internet Directory 10.1.2.3. I was trying to find the password sync modules under /utils/adpwdsync but this directory does not exist in the 10.1.2.0.2 build. Any idea where i can find it? Does 10.1.2.3 support oracle password filter?
Thanks
Shiva

The appropriate way to monitor the client idle time is with a java bean. There is one included in the Forms 10 Demo set. However, the page where the Forms demos (older versions) used to reside is currently not available. You may need to contact Support if you really feel like you need the example code.
You might also get some ideas from here:
http://forms.pjc.bean.over-blog.com/

Deploying Oracle Password filter for Microsoft Active Directory.

We created the Oracle Wallet w/ Self-Signed Certificate. When we setup the Oracle Password filter for Microsoft Active Directory from LDAP server. We are getting the error. Certificate is not valid.
Is this OK or Can we get the success message.

You can't ignore it. A valid certificate is important to make it work.
--olaf

How Can I run Oracle 11g Form without OC4J

Dear All,
I was installed Oracle Data Base and Forms 11g but when I try to run the Form I can't because there's no OC4J.
Thanks
Eyad

Thank you, but when I start weblogic
from { d:\Oracle\Middleware\user_projects\domains\ClassicDomain }, it's ask me about for username and password.
but Unfortunately forget it. How can I reset it ? or How can I make another username and pass word
JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=512m
WLS Start Mode=Production
CLASSPATH=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;d
:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic
patch.jar;d:\Oracle\MIDDLE~1\patchocp371\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;D:\Oracle\MIDDL
E~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
ib\weblogic.jar;d:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3
.6.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;d:\Oracle\MIDD
LE~1\modules\ORGAPA~1.1/lib/ant-all.jar;d:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/
lib/ant-contrib.jar;D:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;d
:\Oracle\Middleware\oracle_common\modules\oracle.dms_11.1.1\dms.jar;d:\Oracle\Mi
ddleware\oracle_common\modules\oracle.jmx_11.1.1\jmxframework.jar;d:\Oracle\Midd
leware\oracle_common\modules\oracle.jmx_11.1.1\jmxspi.jar;d:\Oracle\Middleware\o
racle_common\modules\oracle.odl_11.1.1\ojdl.jar;d:\Oracle\Middleware\Oracle_FRHo
me1\opmn\lib\nonj2eembeans.jar;d:\Oracle\Middleware\Oracle_FRHome1\jdbc\lib\ojdb
c6.jar;d:\Oracle\Middleware\Oracle_FRHome1\opmn\lib\optic.jar;d:\Oracle\Middlewa
re\Oracle_FRHome1\opmn\lib\iasprovision.jar;d:\Oracle\Middleware\oracle_common\m
odules\oracle.ldap_11.1.1\ldapjclnt11.jar;d:\Oracle\Middleware\oracle_common\jli
b\rcucommon.jar;d:\Oracle\Middleware\Oracle_FRHome1\opmn\lib\opmneditor.jar;d:\O
racle\Middleware\Oracle_FRHome1\opmn\lib\wlfullclient.jar;d:\Oracle\Middleware\o
racle_common\modules\oracle.adf.share_11.1.1\commons-el.jar;d:\Oracle\Middleware
\Oracle_FRHome1\jlib\dfc.jar;d:\Oracle\Middleware\Oracle_FRHome1\dvt\lib\dvt-jcl
ient.jar;d:\Oracle\Middleware\Oracle_FRHome1\dvt\lib\dvt-utils.jar;d:\Oracle\Mid
dleware\oracle_common\jlib\ewt3.jar;d:\Oracle\Middleware\oracle_common\modules\o
racle.iau_11.1.1\fmw_audit.jar;d:\Oracle\Middleware\Oracle_FRHome1\oui\jlib\http
client.jar;d:\Oracle\Middleware\oraclecommon\modules\oracle.idm_11.1.1\identit
ystore.jar;d:\Oracle\Middleware\oracle_common\modules\oracle.idm_11.1.1\identity
utils.jar;d:\Oracle\Middleware\oracle_common\modules\oracle.jps_11.1.1\jaccprovi
der.jar;d:\Oracle\Middleware\oracle_common\modules\oracle.jps_11.1.1\jacc-spi.ja
r;d:\Oracle\Middleware\Oracle_FRHome1\ord\jlib\jai_codec.jar;d:\Oracle\Middlewar
e\Oracle_FRHome1\ord\jlib\jai_core.jar;d:\Oracle\Middleware\oracle_common\module
s\oracle.oc4j-obsolete_11.1.1\jazn.jar;d:\Oracle\Middleware\oracle_common\module
s\oracle.oc4j-obsolete_11.1.1\jazncore.jar;d:\Oracle\Middleware\oracle_common\jl
ib\jewt4.jar;d:\Oracle\Middleware\Oracle_FRHome1\jlib\jta.jar;d:\Oracle\Middlewa
re\oracle_common\modules\oracle.ldap_11.1.1\ldapjclnt11.jar;d:\Oracle\Middleware
\Oracle_FRHome1\lib\mail.jar;d:\Oracle\Middleware\Oracle_FRHome1\jlib\netcfg.jar
;d:\Oracle\Middleware\Oracle_FRHome1\jlib\oracle_ice.jar;d:\Oracle\Middleware\or
acle_common\jlib\share.jar;d:\Oracle\Middleware\Oracle_FRHome1\jlib\zrclient.jar
;d:\Oracle\Middleware\Oracle_FRHome1\reports\jlib\aolj.jar;d:\Oracle\Middleware\
Oracle_FRHome1\reports\jlib\confmbean.jar;d:\Oracle\Middleware\Oracle_FRHome1\re
ports\jlib\runtimembean.jar;d:\Oracle\Middleware\Oracle_FRHome1\reports\jlib\rwa
dmin.jar;d:\Oracle\Middleware\Oracle_FRHome1\reports\jlib\rwenv.jar;d:\Oracle\Mi
ddleware\Oracle_FRHome1\reports\jlib\rwrun.jar;d:\Oracle\Middleware\Oracle_FRHom
e1\reports\jlib\rwxdo.jar;d:\Oracle\Middleware\Oracle_FRHome1\jlib\rts2.jar;d:\O
racle\Middleware\Oracle_FRHome1\common\wlst\lib\adf-share-mbeans-wlst.jar;d:\Ora
cle\Middleware\Oracle_FRHome1\common\wlst\lib\mdswlst.jar;d:\Oracle\Middleware\O
racle_FRHome1\common\wlst\resources\auditwlst.jar;d:\Oracle\Middleware\Oracle_FR
Home1\common\wlst\resources\jps-wlst.jar;d:\Oracle\Middleware\Oracle_FRHome1\com
mon\wlst\resources\jrf-wlst.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\
resources\oamap_help.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resourc
es\oamAuthnProvider.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resource
s\ossoiap_help.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resources\oss
oiap.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resources\sslconfigwlst
.jar;d:\Oracle\Middleware\Oracle_FRHome1\common\wlst\resources\wsm-wlst.jar;D:\O
racle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLS
ERV~1.3\common\derby\lib\derbyclient.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\li
b\xqrl.jar
PATH=d:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\native;d:\Oracle\MIDDLE~1
\patch_ocp371\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\nativ
e\win\x64;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;d:\Oracle\MIDDLE~1\modules\OR
GAPA~1.1\bin;C:\PROGRA~1\Java\JDK17~1.0_1\jre\bin;C:\PROGRA~1\Java\JDK17~1.0_1\b
in;d:\Oracle\MIDDLE~1\ORACLE~2\BIN;d:\OracleDB\product\112~1.0\dbhome_1\BIN;C:\P
ROGRA~1\COMMON~1\MICROS~1\WINDOW~1;C:\PROGRA~2\COMMON~1\MICROS~1\WINDOW~1;C:\PRO
GRA~2\Intel\ICLSCL~1\;C:\PROGRA~1\Intel\ICLSCL~1\;C:\PROGRA~2\AMDAPP~1\bin\x86_6
4;C:\Windows\System32;C:\Windows;C:\Windows\System32\wbem;C:\Windows\System32\WI
NDOW~1\v1.0\;C:\PROGRA~2\ATITEC~1\ATI.ACE\CORE-S~1;C:\PROGRA~1\Intel\INTEL(~1\DA
L;C:\PROGRA~1\Intel\INTEL(~1\IPT;C:\PROGRA~2\Intel\INTEL(~1\DAL;C:\PROGRA~2\Inte
l\INTEL(~1\IPT;C:\PROGRA~1\Sony\VAIOIM~1\;C:\PROGRA~2\Sony\VAIOST~1;C:\PROGRA~2\
WIC4A1~1\Shared;d:\Oracle\MIDDLE~1\ORACLE~2\opmn\bin;d:\Oracle\MIDDLE~1\ORACLE~2
\opmn\lib;d:\Oracle\MIDDLE~1\ORACLE~2\perl\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\ser
ver\native\win\x64\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.7.0_11"
Java(TM) SE Runtime Environment (build 1.7.0_11-b21)
Java HotSpot(TM) 64-Bit Server VM (build 23.6-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK17~1.0_1\bin\java -server -Xms256m -Xmx512m -XX:MaxPermSi
ze=512m -Dweblogic.Name=AdminServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WL
SERV~1.3\server\lib\weblogic.policy -Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLS
ERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Xms512m -
Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m -Doracle.home=d:\Oracle\Middlewa
re\Oracle_FRHome1 -Ddomain.home=d:\Oracle\Middleware\user_projects\domains\Class
icDomain -Djava.ext.dirs=d:\Oracle\Middleware\Oracle_FRHome1\jdk\jre\lib\ext -Do
racle.security.jps.config=d:\Oracle\Middleware\user_projects\domains\ClassicDoma
in\config\fmwconfig\jps-config.xml -Doracle.instance=d:\Oracle\Middleware\asinst
_1 -Doracle.instance.name=asinst_1 -Doracle.forms.weblogic=1 -Ddomain.name=Class
icDomain -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1
.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger
-Ddomain.home=d:\Oracle\MIDDLE~1\USER_P~1\domains\CLASSI~1 -Djrockit.optfile=D:\
Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.
server.config.dir=d:\Oracle\MIDDLE~1\USER_P~1\domains\CLASSI~1\config\FMWCON~1\s
ervers\AdminServer -Doracle.domain.config.dir=d:\Oracle\MIDDLE~1\USER_P~1\domain
s\CLASSI~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=d:\Oracle\MIDDLE~1\USER_P
~1\domains\CLASSI~1\config\FMWCON~1\carml -Digf.arisidstack.home=d:\Oracle\MIDD
LE~1\USER_P~1\domains\CLASSI~1\config\FMWCON~1\arisidprovider -Doracle.security.
jps.config=d:\Oracle\MIDDLE~1\USER_P~1\domains\CLASSI~1\config\fmwconfig\jps-con
fig.xml -Doracle.deployed.app.dir=d:\Oracle\MIDDLE~1\USER_P~1\domains\CLASSI~1\s
ervers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternat
eTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Ora
cle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.
pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwc.oracle.h
ome=D:\Oracle\Middleware\Oracle_FRHome1 -Dclassic.oracle.home=D:\Oracle\Middlewa
re\Oracle_FRHome1 -Dweblogic.management.discover=true -Dwlw.iterativeDev=false
-Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=d:\O
racle\MIDDLE~1\patch_wls1036\profiles\default\sysext_manifest_classpath;d:\Oracl
e\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Ser
ver
<Feb 4, 2013 6:20:47 PM AST> <Info> <Security> <BEA-090905> <Disabling CryptoJ J
CE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 4, 2013 6:20:48 PM AST> <Info> <Security> <BEA-090906> <Changing the defaul
t Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 4, 2013 6:20:48 PM AST> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.6-b04 from Oracle
Corporation>
<Feb 4, 2013 6:20:49 PM AST> <Info> <Management> <BEA-141107> <Version: WebLogic
Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050
WebLogic Server 10.3 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Feb 4, 2013 6:20:50 PM AST> <Info> <Security> <BEA-090065> <Getting boot identi
ty from user.>
Enter username to boot WebLogic server:
}

Can You Add The Widescreen Filter Without Stretching Video In iDVD ?

I'm sure I have asked this in the past but cannot find the answer and my memory is lousy!
I have added the Widescreen Filter to all the clips in a normal 4:3 DV sequence and everything looks OK.
I export the QT Movie and when viewed in QT Player it still looks OK as a letterboxed 4:3.
However, when I import it into iDVD or DVDSP I cannot stop it from being ridiculously stretched.
I have tried setting projects as 4:3 and 16:9 in iDVD but the video always appears in the preview window badly stretched.
Is it possible to make it appear as 16:9 without distorting the image?

Would you Adam and Eve it !
It was less than 8 weeks ago I was saying how it worked perfectly!!!!!
http://discussions.apple.com/thread.jspa?messageID=8207730&#8207730
However, now when I preview a movie (with the WS filter) in iDVD (or Simulate it in DVDSP) the image receives extra stretching.
Is it just that it normally appears like that in the preview but will play OK when burned to a DVD ?

How can i reset forgotten password ipod4 without losing my apps

my son forgot his passcode for ipod touch 4 now it is locked too many attempts. is there a way to retrive or change it w/out restoring? he is afraid he will lose apps.

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can I change the password in the iBook donated to our nonprofit. No password was given with the iBook? We need to put in printer and other software. Help, we can use the laptop without changing the password.

How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.

If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck!

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Can I use / (slash) in a password in Oracle

Hi ,
Can I use / (slash) in a user password in Oracle. If yes , how do I bind such a password to a variable and use it in a connection string as ::
SQL:> conn <user_name>/<variable containing the password>@<Database name>
- Thanks
Sandipan Banerjee

<s>No, you cannot on current version.
SQL> create user test_user identified by 'a/b';
create user test_user identified by 'a/b'
ERROR at line 1:
ORA-00988: missing or invalid password(s)
</s>
Yes... you can. I had mistake. I must use " instead of '.
SQL> create user test_user identified by "A/B";
User created.
SQL> grant create session to test_user;
Grant succeeded.
SQL> conn test_user/"A/B"
Connected.
SQL>
Please refer [url http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_8003.htm#i2065278]"create user"
Passwords must follow the rules described in [url http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements008.htm#i27570] "Schema Object Naming Rules"
Message was edited by:
ushitaki

HT4061 I bought my mom an iPad for Christmas this year. We can't use it as it will not recognize her passwords. How do I reset it without using passwords. I want this thing wiped clean, just like it came from the store so that I might start over.

I bought my mom an iPad for Christmas this year. We can't use it as it will not recognize her passwords. How do I reset it without using passwords. I want this thing wiped clean, just like it came from the store so that I might start over. This is very frustrating!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
 Cheers, Tom

My old Apple ID won't allow me to use the old password to log out of the cloud. I can't use the new one, either. The new Apple ID is in the iTunes and App store. But I can't change it on the cloud without logging out. Which I can't do.

I can't use the old Apple id and Apple password on my new Iphone 6 - I can use the new ones. But I can't access the cloud in the meantime. The iTunes and App Stire has the new Apple ID, but I can't get into the settings to change it on the iCloud. It asks for the Old Apple ID and password, which doesn't work. Does anyone know how to change the old Apple ID on the iPhone in the settings for the iCloud?

First, try the new password. If you didn't sign out of iCloud prior to changing the primary email address of your Apple ID, this is what can cause this problem.
Also, read this: If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

Using alter user to change oracle password for logged in web user on XE

Hi All
I'm building an app using the pl/sql web toolkit on XE (installed on Win XP Pro SP2). (I'm not using the APEX front-end).
I'm using basic authentication and oracle database user accounts, and when a user registers for the first time I create them an oracle user account with dynamic sql, followed by some initial setup stuff, and they then log in with it.
All fine so far.
However I want to allow the user to change their oracle password as part of maintaining their user details. I've done this in the past using the web toolkit and Oracle 9i and it has worked fine using dynamic sql.
Unfortunately I can't get the same thing to work in XE.
For example, if I create the following procedure in the schema aligned to the DAD which holds my application and then run it from a browser (IE or Firefox) then the
Browser and the db just hangs - not even an error message:
CREATE OR REPLACE PROCEDURE ut
AS
v_stmt varchar2(300);
BEGIN
HTP.htmlOpen;
HTP.headOpen;
HTP.title ('User Test');
HTP.headClose;
HTP.bodyOpen;
v_stmt := 'alter user "'||user||'" identified by "BERT"';
htp.print(v_stmt);
EXECUTE IMMEDIATE v_stmt;
htp.print('Done');
HTP.bodyClose;
HTP.htmlClose;
END;
If I run the same statement in SQL*plus it's fine, and if I run the same proc for a different user then it's fine too.
I'm sure it's something to do with trying to change the credentials of the currently logged in user, but I would at least have expected an error message.
I'd be grateful for any ideas.
Thanks
Steve

Hi g.myers
Thanks for your response.
Sorry, yes, bad turn of phrase there. It's not the entire db that hangs. The web browser (either IE or FF) hangs, and if I look at v$session at this point, I can see that the user STATUS=ACTIVE and the STATE=WAITING.
I should also point out that I am using standard Oracle users as users of the application, (e.g. create a new user account called TESTER1). These users are then granted the appropriate privileges on the owning schema in order to run the app, access the tables etc.
Therefore it is the user account (e.g. TESTER1) that is running the password change procedure that is owned by the SYS schema. (However again, this is the exact code and method that I've used in the past and it has worked fine).
If I leave the browser hanging long enough, it will eventually return with the following error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /h/hopapp.pwdmaint_do.
Reason: Error reading from remote server
cheers
Steve

Can i use the retention policy without using the Flash Recovery area?

Yes ,lets see here
RMAN>list backup summary
C:\>dir *.bus
Volume in drive C is khurram
Volume Serial Number is F49D-FF2B
Directory of C:\
File Not Found
C:\>dir *.arc
Volume in drive C is khurram
Volume Serial Number is F49D-FF2B
Directory of C:\
File Not Found
RMAN> crosscheck backup
2> ;
using channel ORA_DISK_1
RMAN> list backup summary
2> ;
RMAN> show retention policy
2> ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
RMAN> run {
2>   allocate channel ch0 type disk;
3>   backup as compressed backupset database format
4>   'c:\rman_%s_%d_%T.bus'
5>   plus archivelog format 'c:\arch_%s_%d_%T.arc';
6>   release channel ch0;
7>   allocate channel ch1 device type disk format 'c:\arch_%s_%d_%T.arc';
8>   release channel ch1;
9>   delete force noprompt obsolete;
10>   allocate channel ch2 device type disk format 'c:\rman_%s_%d_%T.bus';
11>   release channel ch2;
12>   delete force noprompt obsolete;
13> }
released channel: ORA_DISK_1
allocated channel: ch0
channel ch0: sid=146 devtype=DISK
Starting backup at 15-APR-08
current log archived
channel ch0: starting compressed archive log backupset
channel ch0: specifying archive log(s) in backup set
input archive log thread=1 sequence=24 recid=79 stamp=652108461
input archive log thread=1 sequence=25 recid=80 stamp=652112650
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\ARCH_130_ORCL1_20080415.ARC comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:05
Finished backup at 15-APR-08
Starting backup at 15-APR-08
channel ch0: starting compressed full datafile backupset
channel ch0: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\SYSTEM01.DB
F
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\SYSAUX01.DB
F
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\USERS01.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\UNDOTBS01.D
BF
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\RMAN_131_ORCL1_20080415.BUS comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:45
Finished backup at 15-APR-08
Starting backup at 15-APR-08
current log archived
channel ch0: starting compressed archive log backupset
channel ch0: specifying archive log(s) in backup set
input archive log thread=1 sequence=26 recid=81 stamp=652112703
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\ARCH_132_ORCL1_20080415.ARC comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:02
Finished backup at 15-APR-08
Starting Control File and SPFILE Autobackup at 15-APR-08
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL1\AUTOBACKUP\2008_
04_15\O1_MF_S_652112718_408X3ZVJ_.BKP comment=NONE
Finished Control File and SPFILE Autobackup at 15-APR-08
released channel: ch0
allocated channel: ch1
channel ch1: sid=146 devtype=DISK
released channel: ch1
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=146 devtype=DISK
Deleting the following obsolete backups and copies:
Type                 Key    Completion Time    Filename/Handle
Backup Set           128    15-APR-08
Backup Piece       128    15-APR-08          C:\ARCH_130_ORCL1_20080415.ARC
Archive Log          79     15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\ARCHIVELOG\2008_04_15\O1_MF_1_24_408RYXDF_.ARC
Archive Log          80     15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\ARCHIVELOG\2008_04_15\O1_MF_1_25_408X1SCR_.ARC
deleted backup piece
backup piece handle=C:\ARCH_130_ORCL1_20080415.ARC recid=128 stamp=652112652
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL1\ARCHIVEL
OG\2008_04_15\O1_MF_1_24_408RYXDF_.ARC recid=79 stamp=652108461
deleted archive log
archive log filename=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL1\ARCHIVEL
OG\2008_04_15\O1_MF_1_25_408X1SCR_.ARC recid=80 stamp=652112650
Deleted 3 objects
released channel: ORA_DISK_1
allocated channel: ch2
channel ch2: sid=146 devtype=DISK
released channel: ch2
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=146 devtype=DISK
no obsolete backups found
RMAN>
C:\>dir *.bus
Volume in drive C is khurram
Volume Serial Number is F49D-FF2B
Directory of C:\
04/15/2008 02:24 PM        96,813,056 RMAN_131_ORCL1_20080415.BUS
               1 File(s)     96,813,056 bytes
               0 Dir(s) 61,960,724,480 bytes free
C:\>dir *.arc
Volume in drive C is khurram
Volume Serial Number is F49D-FF2B
Directory of C:\
04/15/2008 02:25 PM            56,832 ARCH_132_ORCL1_20080415.ARC
               1 File(s)         56,832 bytes
               0 Dir(s) 61,960,724,480 bytes free
C:\>
RMAN> run {
2>   allocate channel ch0 type disk;
3>   backup as compressed backupset database format
4>   'c:\rman_%s_%d_%T.bus'
5>   plus archivelog format 'c:\arch_%s_%d_%T.arc';
6>   release channel ch0;
7> }
released channel: ORA_DISK_1
allocated channel: ch0
channel ch0: sid=146 devtype=DISK
Starting backup at 15-APR-08
current log archived
channel ch0: starting compressed archive log backupset
channel ch0: specifying archive log(s) in backup set
input archive log thread=1 sequence=26 recid=81 stamp=652112703
input archive log thread=1 sequence=27 recid=82 stamp=652112873
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\ARCH_134_ORCL1_20080415.ARC comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:02
Finished backup at 15-APR-08
Starting backup at 15-APR-08
channel ch0: starting compressed full datafile backupset
channel ch0: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\SYSTEM01.DB
F
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\SYSAUX01.DB
F
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\USERS01.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL1\UNDOTBS01.D
BF
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\RMAN_135_ORCL1_20080415.BUS comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:45
Finished backup at 15-APR-08
Starting backup at 15-APR-08
current log archived
channel ch0: starting compressed archive log backupset
channel ch0: specifying archive log(s) in backup set
input archive log thread=1 sequence=28 recid=83 stamp=652112925
channel ch0: starting piece 1 at 15-APR-08
channel ch0: finished piece 1 at 15-APR-08
piece handle=C:\ARCH_136_ORCL1_20080415.ARC comment=NONE
channel ch0: backup set complete, elapsed time: 00:00:02
Finished backup at 15-APR-08
Starting Control File and SPFILE Autobackup at 15-APR-08
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL1\AUTOBACKUP\2008_
04_15\O1_MF_S_652112928_408XBKCZ_.BKP comment=NONE
Finished Control File and SPFILE Autobackup at 15-APR-08
released channel: ch0
RMAN> report obsolete
2> ;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
Report of obsolete backups and copies
Type                 Key    Completion Time    Filename/Handle
Backup Set           129    15-APR-08
Backup Piece       129    15-APR-08          C:\RMAN_131_ORCL1_20080415.BUS
Backup Set           130    15-APR-08
Backup Piece       130    15-APR-08          C:\ARCH_132_ORCL1_20080415.ARC
Backup Set           131    15-APR-08
Backup Piece       131    15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\AUTOBACKUP\2008_04_15\O1_MF_S_652112718_408X3ZVJ_.BKP
Backup Set           132    15-APR-08
Backup Piece       132    15-APR-08          C:\ARCH_134_ORCL1_20080415.ARC
Archive Log          81     15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\ARCHIVELOG\2008_04_15\O1_MF_1_26_408X3HRP_.ARC
Archive Log          82     15-APR-08          C:\ORACLE\PRODUCT\10.1.0\FLASH_RE
COVERY_AREA\ORCL1\ARCHIVELOG\2008_04_15\O1_MF_1_27_408X8RXN_.ARC
RMAN>Note: i have archivelog which is at FRA ,it also apply there and as well yours own defined backupsets path.
Yours comments are wellcome.
http://oraware.blogspot.com/2008/04/can-i-use-retention-policy-without.htmlKhurram

Hmmm, I can't see where the confusion originates. The table near the bottom of www.apple.com/timecapsule/specs.html has one row labelled "For backup using Time Machine" and another row labelled "For AirPort Disk with a USB hard drive".
The requirement for backup via Time Machine is OS 10.5.1 or better. Time Machine is not supported in pre-Leopard (OS 10.5) nor in Windows.
The requirement for using Time Capsule as a remote disk is identified as "Mac with Mac OS X v10.4.8 or later" or "PC with Windows XP (SP2) or Windows Vista; Bonjour for Windows (included on Time Capsule CD)".
Doesn't that pretty much spell out that Time Capsule works as a network drive without the need for Time Machine?
Also Joe (the OP) never indicated any desire to use it with Windows so I'm not sure why all the discussion about Windows compatibility. ??
Also the quote posted by Henry seems pretty clear:
"Time Capsule with Time Machine in Leopard is the ideal backup solution. But that doesn’t mean Tiger, Windows XP, and Windows Vista users can’t enjoy the benefits of Time Capsule, too. Because it mounts as a wireless hard drive, Tiger and Windows users simply access Time Capsule directly from the wireless network for exchanging and storing files quickly and easily."

Can I use touch ID for App Store without using a passcode?

It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??

From the article:
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting
and
You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
Regards,

My friend gave me ipod touch with all his accounts, i created new accounts but when i went on the appstore and tried to update apps installed by him,i was asked his account's password! i dont know his password.how can i use my account to update apps?

my friend gave me ipod touch with all his accounts, i created new accounts but when i went on the appstore and tried to update apps installed by him,i was asked his account's password! i dont know his password.how can i use my account to update apps?

You can't. Apps and really all content purchased/downloaded through one Apple ID is forever tied to that Apple ID. In the case of Apps they will always request that Apple ID to update as they are licensed to that Apple ID.
In reality, the Apps were licensed to that Apple ID by the developer. And cannot simply be given away to you for you to use.
He should have wiped the iPod clean so you could set it up for your use without any of his accounts or purchased content as you are not really licensed to any of those Apps.
Your friend should have followed this support document before giving the iPod to you:
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

Can I using Oracle Password filter without using DIP?

Similar Messages

Maybe you are looking for