Can i write to a DatagramChannel from 2 threads?

Without using a Selector - i wanna give one thread an option to read from the channel and right after that - to write, and give another thread that receives the channel as parameter
the option to write whenever it needs (a condition i'm using).
The API says "Datagram channels are safe for use by multiple concurrent threads. They support concurrent reading and writing, though at most one thread may be reading and at
most one thread may be writing at any given time." - can i rely on that?
Thanks,
Snayit

This works fine for other Channel types but I haven't tried DatagramChannel

Similar Messages

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

How can I write to a file from a livecycle designed PDF?

I am producing a PDF in Livecycle designer and would like to write a sub-set of data from the document.
I have tried methods such as exportData() but this exports everything which i don't need.
I have seen another method which is to attach a file and write to that but ideally I'd just like to be able to create a new file.
var data = xfa.data.nodes.item(0).nodes.item(1).saveXML() var oFile = util.streamFromString(data , "utf-8");
I would like to write oFile.
Thanks in advance
Edit:
I would like to add that ideally the user would be presented with a save as dialog box, so the can choose the location of where to save the xml data.

an extraction out of expert one-on-one from Thomas Kyte
<quote>
when an oracle istance is created the services that support it are setup to 'log on as' the system (or operating system) account, this account has very few privileges and no acces to Window NT Domains. To access another Windows NT machine the OracleServiceXXXX must be setup to logon to the appropriate Windows NT Domain as a user who has acces to the required location for UTL_FILE.
To change the default logon for the Oracle services go to (in Windows NT):
Control Panel | Services | OracleServiceXXXX | startup | log on as; (where XXXX is the instance name)
In Windows 2000, this would be:
Control Panel | Administrative Tools | Services | OracleServiceXXX | Properties | Log on tab; (again XXXX is the instance name)
Choose the This Account radio button, and then complete the appropriate domain login information. ONce the services have been setup as a user with the appropriate privileges, ther are two options dfor setting UTL_FILE_DIR:
* Mapped Dirve: To use a mapped drive, the user that the service starts as must have setup a drive to match UTL_FILE_DIR and be logged onto the server when UTL_FILE is in use.
* Universal Naming Convention: UNC is preferable to Mapped Drives because it does not require anyone to be logged on and utl_file_dir should be set to a name in the form \\<machine name>\<share name>\<path>
You will of course need to stop and restart Oracle after changing the properties of the service.
<\quote>
I want to write some data to a (external) file. I have it working with the function UTL_FILE.
My problem is I want to write to a file on a mapped drive (so a drive on a different machine). This is not working.
Does anyone know a way to build this.
Please send your responses to [email protected]
Many thanks,
Alex Nagtegaal

How can i write to or read from the digital I/O of the SPIDER8 with DIADEM?

We have the problem that we haven't found out yet how to activate the digital I/O of the HBM SPIDER8 hardware with DIADEM 6.0.

The digital input is supported since DIAdem 3.02 the output since DIAdem 7.0.
Maybe that the problem is the following:
- Analog input will be measured on channel 0 up to 7
- Digital input will be measured on channel 8 as word
So if you would like to measure bit 3 you must add a
F(x)-block with this function getb(d,3).
I hope this will help you.
Greetings
Walter

How to read/write a binary file from/to a table with BLOB column

I have create a table with a column of data type BLOB.
I can read/write an IMAGE file from/to the column of the table using:
READ_IMAGE_FILE
WRITE_IMAGE_FILE
How can I do the same for other binary files, e.g. aaaa.zip?

There is a package procedure dbms_lob.readblobfromfile to read BLOB's from file.
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_lob.htm#sthref3583
To write a BLOB to file you can use a Java procedure (pre Oracle 9i R2) or utl_file.put_raw (there is no dbms_lob.writelobtofile).
http://asktom.oracle.com/pls/ask/f?p=4950:8:1559124855641433424::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:6379798216275

How can i write to ntfs device

how can i write to ntfs device from mac

By default, OS X (and near all operating systems different than Windows) can't write in NTFS drives because of a Microsoft limitation.
To be able to write in NTFS drives, you have to use a third-party application. There are a lot, but the most recommended is Paragon NTFS, although it's a paid application. If you want a free app, try this > http://osxfuse.github.com

Can't write on my usb pen drive from 2 days?!?

hi, from 2 days i can't write on my usb pen drive (Transcend JetFlash Flash 16gb with FAT32 partition)
if I do a manual mount in a console by root, I can easly a do cp command and copy files over.
if I open dolphin and mount by hal the drive, I can read but not copy files, and if I open a console and do a cp command, I have this error:
cp: cannot create regular file `/media/OZETA/ownage.png': Read-only file system
what the... is going on? i used my pen 4 or 5 days ago
on the contrary, i can mount my sd card (fat32) and my 2 usb disk (fat32 and ntfs) and i can write on them.
help
Last edited by ozeta (2009-05-21 19:10:19)

Have you tried running dosfsck on the device? Of course, be sure that you unmount the usb drive and verify the dev file of the relevant partition.
Something like:
dosfsck /dev/sdb1 <----replace with correct dev file!!
to see what the problem is and then
dosfsck -a /dev/sdb1
Of course, I would strongly encourage you to backup all data on the drive first.
Last edited by madalu (2009-05-22 12:45:26)

How can I write to a Siemens S7-300 PLC tag from OPC Server.vbai page by using a Knob object ?

I am using NI OPC Server and I can read Siemens S7-300 PLC tags such as thermocouple values from the PLC. Additonally I can write manually a constant value to that tag by selecting it in the NI Distributed System Manager. And I can read the written value from NI Distributed System Manager or from NI OPC Server. But I can not write any value to the S7300 PLC tags such as by using a knob object at the NI Vision Builder AI Inpection (.vbai) page.
Any help is welcomed. Thanks in advance.
Attachments:
manual_writing_to_plc.png ‏298 KB

The tutorial at the following location explains how to use Vision Builder AI as a OPC server.
https://decibel.ni.com/content/docs/DOC-18647
http://www.ni.com/white-paper/13574/en
To allow VBAI to connect to an OPC Server (i.e. act as an OPC client), you need to purchase and install the DSC Run-time System.
Once installed, you can create an OPC I/O client using the Distributed System Manager, create variables bound to OPC tags, then create VBAI network variables that are bound to these variables.
Another possible technical solution to connect to OPC Servers supporting Data Access 2.0 is to use the datasocket API in a Run LabVIEW step.
http://forums.ni.com/t5/Machine-Vision/Read-and-Write-with-OPC-through-NI-Vision/m-p/2048278/highlig...
Hope this helps.
-Christophe

How can i write a code to get sume of value from days.

Hi,
how can i write a code to get the sum of value of days(example 1 to 30).
This is in BPS ...
i created multi planning area and creted planning function with {keyfigure name,planning area,days}.
now i want to read all the actual values from basic planing area(basic cube) and calculate the sum of the value.if you have idea can you share the code.
ENTRIES = VARC ( 'zvardays' ).     ex(zvardays like 28 days or 29 days or 30 days or 31 days)
COUNT = ENTRIES.
*Get the all the days value from actual
FOREACH PAREA = 'basic planning area'.
COUNT = 1.
DO
     SUM = SUM + {amount, count}      (amount is a keyfirgure value)
ENDDO.
COUNT = COUNT+1.
   SUMACT = SUM.
ENDFOR.
can you correct the above code ....to read the values and sum of the those value.
Thanks...

Hi ..
That is ok..
Can you provide sample code for my requirement..
and also how can i pass the error message (can you help me syntax )
and if my acutal-total is not equal to plan-total then
i have to pass the error message and then i have to restrict save the data how i can i restrict(user can not save the data until the values should be equal) .
Can you help me it is very urgent..
thanks.//
Edited by: Eyda rose on Jun 4, 2008 9:29 PM

Can i write from a URLConnection ?

Can i write from a URLConnection ?
I can read but can i write on a txt file ?

You can upload, just as you would upload from an HTML page with a form and a Submit button. That's what you can do.

Can we write query for fomatted search without from clause

can we write query for fomatted search without from clause as below.
SELECT (($(u_amt)*14)/100)
here U_amt is a UDF .I want to assign this to another field .
Rgds,
Rajeev

Hi Rajeev,
You can write query for FMS without from. That is because you can omit it when you get value from active form by default. The grammar of it is:
Select $[$38.u_amt.0\] * 14/100 in your case if you have item type marketing document @line level.
From View-System Information, you can get the info you need for your FMS query at the left bottom of your screen.
Thanks,
Gordon

Can't write to network shared drive from PC

I have been using a network drive shared via samba for almost a year. The drive is shared from a PC and it is a ntfs fromatted drive. I have never had a problem writing to the drive before. Today, I did a fresh install of Win7 and all of a sudden I can't write to the drive any more. I have windows sharing the drive with all permissions enabled. I know I am missing something, but I don't know what. Any help would be greatly appreciated.

Ok, I made a mistake. When I enabled permissins to read/write on Win7, I must have forgotten to "apply" and save, because I just checked the settigns and permissions were not what I thought they were. I went back through, hit apply and then saved the settings and everything works as it should.

Hi, I can not delete files Film / video from the desktop it wants my password I write but Ando I can not float to Trash

Hi, I can not delete files Film / video from the desktop it wants my password I write but Ando I can not float to Trash

This topic has a fix for that problem: Desktop to Trash Problem: "Finder wants...: Apple Support Communities
OT

How can I write from an Include?

Hi to everybody!!
I've a problem with my include...inside of this I've to write '2'. for make this I put...
write: '2'.
But when I execute the program... the number 2 doesn't appears, somebody told me that I need to put the End-OF-SELECTION, but when I can't see it.
Does anybody know how can I write something from an include?
Thanks a lot.
Regards,
Rebeca

Try this way...
I don't where you placed the include , you place under the event and see.
REPORT ZTEST.
END-OF-SELECTION.
INCLUDE ZINCLUDE.

Why am I getting "Can't write file"? from jsp

I have the following code:
public String OpenRAF(String fileName) {
try {
file = new File("http://www.domain/filename.prn");
} catch (java.lang.NullPointerException npe) {
writeError(npe);
} catch (java.lang.IllegalArgumentException iae) {
writeError(iae);
if (!file.isFile()) {
retn = "Not a file:" + file.getAbsoluteFile();
if (!file.canRead()) {
retn = "Can't read file:" + file.getAbsoluteFile();
if (!file.canWrite()) {
retn = "Can't write file:" + file.getAbsoluteFile();
try {
raf = new java.io.RandomAccessFile(file, "rw");
} catch (java.io.FileNotFoundException fnfe) {
rtn = false;
Why am I getting the "Can't write file http://www.domain/filename" from this jsp?
I would like to open this file read,write and update it with the RandomAccessFile api, but I can't seem to get write permissions. I have granted 777 permissions on the file.
Is this a Tomcat file permission issue or something?
Thanks.

Thanks,
But I want to read,write to a file in the application Server. How do I get the path correct?
I want to use something like java.io.RandomAccessFile("somepath", "rw");
I should be able to access the filesystem somehow? The only way I could find the file was using the URL. Whenever I used a relative or absolute path, I could not access the file.
How do I know what the filesystem path is on an application server (Tomcat 4.1) from a Jsp 1.4?
Thanks again

Can i write to a DatagramChannel from 2 threads?

Similar Messages

Maybe you are looking for