Can iDVD only be used for a DVD?

What if I don't want my video on DVD? That is I just want a video that will play onscreen, streaming, and so on, but need DVD like functionality such as menuing, nice intro, etc.
If not what tool do I use? Thank you.

What about Quicktime Pro? If you start just the app it goes to the Apple homepage. Lots of menu items there. Or is that some sort of embeded xml page?
That's a good question. QT can clearly go to a URL and display the contents - if they are in the correct format.
Why don't you go over to the Quicktime forum and see if anybody knows how to do it.

Similar Messages

Can Firefox Hello be used for three or more way calling or is it only for person to person?

Can Firefox Hello be used for three or more way calling or is it only for person to person?

hello again, i've asked in the development channel for firefox hello about this issue: multiparty video-conferencing is on the long-term roadmap but it might still take a lot of engineering (firefox hello is based on the webrtc standard which is a peer-to-peer protocol between two machines only - multiparty calls might be a rather tricky thing to figure out on this basis)

Can Firefox Hello be used for group conversations?

Firefox is heavily used at my company and would like to add Firefox Hello for webinars and training for our field employees. Can this be done? Multiple users in one conversation in Firefox Hello?

hi Pasquell31, at the moment firefox hello can only be used for a direct conversation between two people.
multiparty video-conferencing is on the long-term roadmap but it might still take a lot of engineering (firefox hello is based on the webrtc standard which is a peer-to-peer protocol between two machines only - multiparty calls might be a rather tricky thing to figure out on this basis)

Can FW CS3 be used for graphic for printing?

I am very familiar with FW but I do not like Photoshop,
however I have both I preffer to use FW. As I have seen on one
presentation new FW CS3 has CMYK pallete so my question is: can FW
CS3 be used for preparation of graphic for printing or what are the
obstacles? After preparing images in FW I will use InDesign for
text or maybe the text in FW is wector and maybe I could use FW
including text and not to use INDEsign far small projects? Does
anyone has any experience with this subject?
Regards
Martin

qnnick wrote:
> I am very familiar with FW but I do not like Photoshop,
however I have both I
> preffer to use FW. As I have seen on one presentation
new FW CS3 has CMYK
> pallete so my question is: can FW CS3 be used for
preparation of graphic for
> printing or what are the obstacles?
Fireworks does not operate or export in CMYK color space. It
was
developed for screen images only, and operates and exports in
RGB color
space. It is not recommended that you use it in preparation
of images
for print. You mentioned that you don't like photoshop. You
might like
Illustrator better.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8

Can an iMac be used for WD My Book Live safepoints?

I have a Western Digitial My Book Live network drive. All Mac's and PC's can read/write without a problem. I would like to create a safepoint (WD term for backup) on an iMac but can't seem to get past correctly discovering the devices on the network. The MBL can 'see' the shares on the XP PC but nothing on the Mac's. Unfortunately the XP PC is not suitable for backups.
Can a Mac be used for MBL safepoints? If so, how is that accomplished?
Yes, I've posted this same question the WD Support and WD Communities but no responses. Most MBL Mac users posting on WD forums are using them for Time Machine. I thought maybe someone on the Apple forums might have solved this problem.
Thanks in advance for any help.
Mike

I am having the same issue. Did you ever find an answer? I see no one ever responded to you. I have a WD cust service Tech support question submitted but no answer yet there either. Thanks for any info you have.
I get the error
30000 - Unknown error. Retry your last operation. If the error persists, contact WD Support for assistance.
(share_discover_9)
when I choose the iMac as the location I would like to use.

Can a IDOC be used for data exchange from R/3 to CRM

Hi All,
First, can a IDOC be used for data exchange from R/3 to CRM
I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
To achive this can I use IDOC?
Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
Please respond immediately.
Regards,
Gopinath

IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
Hope this helps,
Kai

Can Adobe Distiller be used for converting all pro/e (3D -2D) files to pdf format?

Can Adobe Distiller be used for converting all pro/e (3D -2D) files to pdf format?

Acrobat Distiller Server converts Postscript to PDF.

In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is overheating. What would that be - so I can have repairs done? The

In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is
overheating. What would that be - so I can have repairs done? The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
<Edited By Host>

Hello USME,
'Tis a common problem on old Macs.
Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
Good luck!... Jon

Can Adobe Collage be used for images smaller than the standard 1200 by 789?

Can Adobe Collage be used for images smaller than the standard 1200 by 789?

Hi,
* Photoshop Touch does have very good text capabilites.
* For opening the Collage as an Artwork (Merged layer) in Photoshop Touch, you just need to upload the Collage file to Creative cloud and import it directly into Photoshop Touch.
But if you are looking to preserve all the layers of the Collage file, you should download the Collage file as PSD from Creative Clould and import it in Photoshop Touch as layers.
* Collage does have canvas scalability, you can extend up the canvas on all the four directions. But i think in you case you are looking for having specific custom sizes of the canvas, which is not currently available in Collage. Currently you cannot shrink the canvas below the default canvas size.
Hope this is helpful. Please do revert back if you have more queries.
-Subbi

Can photoshop elements be used for commercial work?

Can photoshop elements be used for commercial work?

Check with the company that does your printing to be sure that output from PSE is ok and their file format requirement.

Can we know buffers used for a particular program?(not for the instance)

Can we know buffers used for a particular program?(not for the instance)

You can do a runtime trace using ST01 but you won´t find out how much buffer a program "uses" since the buffer is shared for all workprocesses.
Markus

Can DBMS_ADVISOR package be used for SQL Tuning Advisor ?

Can DBMS_ADVISOR package be used for SQL Tuning Advisor ?

SQL> SELECT * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production

Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc

Hi,
Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc.
Reason: We have a job that creates leads, tasks in 11i, but r12 is not working as expected, an SR is open with Oracle for a long time and no solution so far. I am thinking of using SQL*loader to populate the data, but these are html pages. Will SQL* Loader work?
12.1.4 / 11g db
Appreciate your inputs.
Thanks,
K

Can SQL*Loader be used for Oracle html pages, for e.g Customer, Tasks etc. It should work.
Reason: We have a job that creates leads, tasks in 11i, but r12 is not working as expected, What is the issue you have with R12?
an SR is open with Oracle for a long time and no solution so far. I am thinking of using SQL*loader to populate the data, but these are html pages. Will SQL* Loader work?What was Oracle feedback? Did they say it is certified and can be used?
Thanks,
Hussein

Can sap ps be used for product development for cost monitoring?

sap-pp is configured but client insisting for product development they want sap-ps ,can sap ps be used for product development for cost monitoring in textile industry?and how to configure with reference to sap-pp?
venkatdas vanga

Hi,
SAP PS has good Integration with PP and FI CO modules. So goes well along the ETO scenario.
The normal process is that Project is created and goes in to design phase , where we design product as per customer's requirement . Design BOM helps in this.Once you design is ready you can generate Production Orders base on MRP generated with reference to Projects.
All the cost including overheads are charged to the Project as actual cost.
These costs are later settled to Cost Center.
Refer this link for detailed information http://www50.sap.com/businessmaps/76FC9D515D244754A09308BA54E97C42.htm
Thanks,
Nitin

Can iDVD only be used for a DVD?

Similar Messages

Maybe you are looking for