Can IPV6 QOS support in Cisco 3750x switches

Hi
I have tried IPv6 qos using class map in Catalyst 3750 switches but the platform is not support.
Can anyone configured the IPV6 qos in Cisco 3750-X switches. Does it support?
Cisco 3750 config
policy-map up
class bwtest-up
police 2048000 128000 exceed-action drop
policy-map down
class bwtest-down
police 512000 128000 exceed-action drop
trust dscp
class-map match-all bwtest-up
match access-group name bwup
class-map match-all bwtest-down
match access-group name bwdown
ipv6 access-list bwup
permit ipv6 2402:xxxx:x:x::/64
ipv6 access-list bwdown
permit ipv6 any 2402:xxxx:x:x::/64
L3(config)#int g1/0/4
L3(config-if)#service-policy input up
QoS: class(bwtest-up) IPv6 class not supported on interface GigabitEthernet1/0/4 ( error)
Please help!

interface GigabitEthernet1/0/4
description ##Test LAN-IPV##
no switchport
bandwidth 2048
no ip address
load-interval 30
speed 100
duplex full
ipv6 address 2402:xxxx:x:x::1/64
ipv6 enable
ipv6 ospf 200 area 0
end
switch sw version
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(55)SE9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Mon 03-Mar-14 22:45 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02F00000
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)
Cherry uptime is 6 days, 7 hours, 23 minutes
System returned to ROM by power-on
System restarted at 07:04:50 IST Thu Mar 19 2015
System image file is "flash:/c3750-ipservicesk9-mz.122-55.SE9.bin"

Similar Messages

Cisco 3750x switch. Turning off a port at night

Hi everyone,
I have a question regarding power management for the Cisco 3750x Switches. Is it possible to power down switch ports
automatically at a specific time and if so how. I would like several Ports to be powered down between 2 and 3 o clock at night.
Can anyone tell me how i can realise this? (these switches have Energie Wise capabilities)
I hope to hear from you soon.
Thanks in advance!
Kind regards,
Wouter Platteeuw

few things to try:
Go to your email setup, go to the account in question, go to filters, Check the box that says "do not forward messages to the device" Set this back to the default if this doesn't work.
Something else: try using the blackberry firewall
http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB23877
I think this will block all email though, but you can take a look at the options.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

How can i configure hsrp in cisco 3850 switch please guide me

how can i configure hsrp in cisco 3850 switch please guide me

Hi Mauleshg,
Please the below mention link to configure Hsrp hope this will help you.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/ip/configuration_guide/b_fhrp_3se_3850_cg/b_fhrp_3se_3850_cg_chapter_010.html
Br.
Mohseen Patel

Can we schedule backup of cisco san switch 9148 through windows backup utility.

can we schedule backup of cisco san switch 9148 through windows backup utility.

sure, you can write a batch/perl/powershell/whatever script that will connect to your switch and then backup the configuration. You need to decided where you are going to back it up to, possible options include TFTP, SCP, FTP, SFTP. For example i am backing to a TFTP server, my perl script connect to the switch and runs this command:
copy startup-config tftp://tfpserver-ip/mds9513.$(TIMESTAMP).config
TIMESTAMP is actually a built-in variable that will be replaced with the date/time configured on the switch.

Cisco 3750X Switch, Observing change in Running & Startup Config

Hi,
I have a cisco catalyst 3750X switch running with c3750e-universalk9-mz.152-1.E1.bin, where I'm able to see the running configuration & Startup configuration on the device is not in Sync even after saving configuration to the NVRAM.
Startup Configuration is the one which is required for my network to work properly, but as I'm able to see running configuration is adding some of the configuration which is not actually required in the template. Can anyone help me to get this issue addressed.
Configuration attached.

Can you try this command:
Switch#copy startup-config running-config
And then check if you are still face the same issue?
HTH
Regards
Inayath

How to configure multiple cisco 3750x switches

Hi All,
we recently bought 25 x 3750-48PS switches and need to roll them out with similar IOS and configuration.
I normally get a console to the switch from my laptop and do one by one.
is there a better way or software which can speed up the process ?
Thanks
Ql

Read this: ZeroTouch SmartInstall
If configured properly you can load the correct configuration & load the correct IOS in 20 minutes. The entire pile in 20 minutes!

IPv6 Netflow support on Cisco PI1.2

Hi,
i just came to know Assurance feature license doesn't come for free when upgrading from LMS4.2 or NCS1.1. It has to be purchased. Before buying this license, i would like to know if IPv6 netflow is supported.
Thanks,
Kerim

Arun:
Check those:
Wireless LAN IPv6 Client Deployment Guide
IPv6 support on the Wireless Lan Controller
Let me if those solve your issue.
Amjad
You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".

CISCO 3750X stacking for 5 switches , only 4 switches are coming in stack

Dear All,
I have 5 cisco 3750X switches ,but only 4 switches coming up 5 switches i am unable to see .
Connection for the switch :Please find the attached snapshot for the stack data connection .
Also find the snapshot for the stack power connection .
Please provide your assistance and support to overcome this issue .

Dear Marvin,
Thanks for your reply.
is my connection provided in attachment for data stack are ok .
i login to Switch # 5 through console
following is the result :--
switch: ?
? -- Present list of available commands
arp -- Show arp table or arp-resolve an address
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
memory -- Present memory heap utilization information
mgmt_clr -- clear management port statistics
mgmt_init -- initialize management port
mgmt_show -- show management port statistics
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
ping -- Send ICMP ECHO_REQUEST packets to a network host
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
sleep -- Pause (sleep) for a specified number of seconds
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
switch: version
C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(58r)SE, RELEASE SOFTWARE (fc1)
Compiled Tue 26-Apr-11 06:59 by abhakat
switch: boot
Loading "flash:/c3750e-universalk9-mz.122-58.SE2/c3750e-universalk9-mz.122-58.SE2.bin"...flash:/c3750e-universalk9-mz.122-58.SE2/c3750e-universalk9-mz.122-58.SE2.bin: no such file or directory
Error loading "flash:/c3750e-universalk9-mz.122-58.SE2/c3750e-universalk9-mz.122-58.SE2.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
All other 4 switches i can see in stack but not these switches and also the status light for this switches is blinking green please provide your assistance .

Cisco 3750X -- 10G uplink - Can be used as access port?

Dear All,
I have small question, I am planning for Cisco 3750X with 10G SFP+ service module. I want to know that whether it can be used as Access Ports connecting to server as this is mostly used as uplink port.
Thank You,
Abhisar.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Well if you want to connect anything with 10g to a 3750X, you're limited to using a module with 10g ports.
Other than 10g capability on some module cards, something to note, the module ports, I believe, are supported by larger buffers (including the gig module ports).
As the others have noted, you can use any port for any purpose. However, if you connect a server to a 10g port, be aware you might start to see drops on your other host (gig) ports as the server will now be able send faster than the host port can receive data. To minimize this, you might either disable QoS on the switch (providing maximum buffers to all egress traffic) or you might need to tweak buffer resource settings (the default settings often drop some packets, when there are bursts, of default marked packets).

Ipv6 HSRP gloabl unicast address on cisco 3560 switch

Dear Team,
We are using cisco 3560 switch. Now we are going to implement ipv6 in our network. But we are not disturbing to existing ipv4. my question is 1) Can we confiure the global unicast ipv6 address in ipv6 HSRP and 2) can cisco 3560 switch will support ipv4 and ipv6 standby group on same SVI ?

YES

IPV6 Support in Cisco IOS

I am having a difficult time determining why on a 2811 running IOS c2800nm-advsecurityk9-mz.150-1.M2.bin, the router won't accept ipv6 commands. The feature set from what I can discern includes ipv6 support. However, I have received mixed views. Does advsecurity image support ipv6 or do I need adv ip services image?

The philosophical direction of Cisco is to have full IPv4 and IPv6 parity across feature sets. Any IPv4 feature should appear in the same license level of software for IPv6.
That said, some older software and platforms may have been missed.
See
https://supportforums.cisco.com/community/netpro/network-infrastructure/ipv6-transition/blog/2011/09/21/ipv6-feature-packaging-in-cisco-routers-and-switches
See if the problem persists with the latest version. If so, I'd treat it as a bug and open a case.

Cisco 3750x 24 port poe switch single port is faulty.

what i can do if my cisco 3750x 24 port poe switch single port is faulty ????

Duplicate posts.
Go here: http://supportforums.cisco.com/discussion/12187366/cisco-3750x-24-port-poe-switch-failure

IPv6 Support on Cisco UCS 6248UP Device

Hi,
We are in process of implementing IPv6 in our production environment and wanted to know what needs to be done on UCS level to achive the same ?
We have Cisco 4948 and Nexus 3048 switches in our production environment above 6248 switch
Thanks,
Amit Vyas

Starting with 2.2.1b (El Capitan) IPv6 is supported (don't forget, Fabric Interconnect is a L2 switch, no L3 = routing)
IPv6 Management Support:
All 3 IP addresses (2 physical and 1 cluster) are now able to have IPv6 addresses as are the new CIMC “in band” addresses. Services such as NTP, DNS are also reachable via IPv6.

IPv6 support in Cisco UC - especially CUAC

Guys,
Does anyone have any recent detailed information on IPv6 support and Cisco UC? The documentation on CCO is out of date by 3 years and doesn’t include information on applications such as Attendant Console (CUAC). The latest documentation from the UC 10.0 Beta Training is very high level. With key features like extension mobility not supporting IPv6, it’s difficult for us to advise customers on deploying a Cisco UC deployments whilst they are planning migrations to IPv6.
Does CUAC support IPv6?
Any updated details on Cisco UC support would be very much appreciated!
Thanks
Jonny

The philosophical direction of Cisco is to have full IPv4 and IPv6 parity across feature sets. Any IPv4 feature should appear in the same license level of software for IPv6.
That said, some older software and platforms may have been missed.
See
https://supportforums.cisco.com/community/netpro/network-infrastructure/ipv6-transition/blog/2011/09/21/ipv6-feature-packaging-in-cisco-routers-and-switches
See if the problem persists with the latest version. If so, I'd treat it as a bug and open a case.

How can I mirror all ports on CISCO 3750 switches to one Gigabyte port?

Hi,
I have a requirement to mirror all the ports on my 7 CISCO 3750 switches, which are in 3 separate stacks, to one single Gigabyte Ethernet port.
Does anyone know how I can do that?
Thanks in advance.

Vlad, thanks a heap for your response.
I want to apply to my sitation. Please let me know if I get them right in the following:
Catalyst A
vlan 901
remote-span
monitor session 1 source interface fastethernet 1-48 (I want to monitor all ports on the CISCO 3725)
monitor session 1 destination remote vlan 901
Catalyst B
vlan 901
remote-span (If I don't need to monitor this switch, do I still need to put anything into this switch at all?)
Catalyst C
vlan 901
remote-span
monitor session 1 source interface fastethernet 1-48 (I want to monitor all ports on this switch as well)
monitor session 1 source remote vlan 901
monitor session 1 destination interface gigabitethernet 3 (There are 4 Gigabit Ethernet Uplink in CISCO 3750, I want all the traffic to go to port 3, is this the right way to do?)
Thanks in advance.

Can IPV6 QOS support in Cisco 3750x switches

Similar Messages

Maybe you are looking for