Can logic pro only be installed onto 1 computer

this guy has logic pro complete for sale with the usb dongle, will it work on mine, or can it really only be installed on 1 machine?

Be careful. It might be an academic version which, IIRC, is not upgradeable to major versions.
But yes, LP can be installed on as many machines as you want - the dongle is the most important part and is required to be attached before Logic will work.

Similar Messages

  • How many times can Logic Pro 9 be installed on different machines?

    I'm getting a new computer and wondered if I could reinstall Logic on the new computer without purchasing it again.
    Thanks!

    garfen,
    No. You still need to initially install using the DVDs you purchased.
    You can pick up a DVD drive for $30 from Amazon (Their basic drive which works very well) or borrow one..and install from that..
    Or
    You can use Remote Disk if you still have your original Mac that had a DVD drive built in..
    Or..
    Use your old Mac (or a friends) to create DMG (disk images)..from your DVDs..  save them to an ext drive and install from those images... (This is the method I used)
    Once the next major version of Logic Pro is released (whenever that may be) this situation will likely be resolved as there will probably be only one way to purchase Logic Pro and that will be downloading via the App Store but for now, we do have this unfortunate situation... where the App Store and DVD versions are actually two different products still... Logic Pro and Logic Studio respectively... and are not interchangeable in regards to your situation.

  • Can Logic Pro work with soundfont (sf2) files?

    Just curious. I have Garageband and the DLS Music Player has no way to change banks or presets for downloaded sf2 files except by sending a "program change" event from a midi controller. Can logic pro do that? I.e., if I load an sf2 file, can it use different banks and presets within that sf2 file, or is it limited to only the very first of each like Garageband?

    Oh, I see, you don't have Logic yet - well, what I meant was that, once you've got your sf2 files into the EXS, just have a track for each different sound (open up an EXS24 on each track). If you need to use a lot of tracks, you can use Logic's 'Bounce in Place' feature, which instantly creates an audio file for you from the software instrument region you've created for any particular sound, so you don't need to think about banks of presets or program changes etc..
    Logic comes with a vast array of software instruments and presets for them, along with a huge number of loops, if that's your thing - you may well find that good quality sounds that you want are already there and you won't need to use soundfont files anyway. If you've been using Garageband and want to take your work further, Logic is probably the next, well, logical step.

  • Can logic pro 9 be upgraded if i have the Express version?

    HI,
    Can logic pro 9 be upgraded if i have the Express version?
    because when i try to do it, ask me for my Logic Studio SNr. and i just copy my Logic Express SNr. and doesn't work !
    Is that normal?

    I'm not sure I understand the wording of your question.
    If you mean "Can I upgrade Logic Express 9 to Logic Pro 9?" the answer is yes, you can.
    When you get the upgrade, if you already had LE9 installed on your system, the installer will already know your existing serial number, and it will be asking you for your new serial number of the upgrade. If you are trying to put in your old serial number here, this won't work, it's the serial number of the upgrade it's asking for.
    If you are having serial number issues and believe you are using the correct serial numbers, then you'll need to contact Apple for help.

  • Can logic pro read sound fonts?

    I am currently trying to use Garageband and have reached a couple of cripling limitations.
    1) the orchestra instruments I need are not supported (oboe d'amore and baritone oboe)
    2) there are free sound fonts available which contain good samples of these instruments but Garageband can only read the FIRST instrument from a sound font?  Which basically (in my opinion) means it cannot read a sound font.
    Can Logic Pro read soundfonts correctly?  Can I use all the instruments from a sound font using Logic Pro?

    jimka_2001 wrote:
    When you say "can convert sound fonts"  do you mean just the first instrument in the sound font, or all of the instruments in a single sound font?
    All of the instruments get converted into single patches located inside a folder. Only one set of samples from the soundfont exist, but each patch from the soundfont is available as a single entity. In other words, you don't select the soundfont and have individual patches available within the SF, each patch is loaded as a separate instrument.
    Which makes me think... are you sure that Garageband isn't doing this?

  • Do I need to uninstall previous version of Logic Pro before I install Logic Pro X?

    Basically what it says above!?

    You don't need to delete the previous Logic Pro version before installing Logic Pro X. Logic Pro X is a new version and won't replace the old Logic Pro version, so if you like Logic Pro X and that's what you need after testing it, remove the old Logic Pro

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • Why won't iTunes 11.1 install onto my computer?

         Okay, so... I've had the iPod Touch 5 since march. And today upgraded (well, downgraded) to the iOS7. I hate it; but, I figured if I can't go back I might as well deal with it.
         I plugged my iPod Touch into my computer, and waited for iTunes to pop up. It did. But, it said my iPod was no long compatible with that version: and to upgrade to iTunes (11.1 version). I went to www.apple.com/download/ just like everyone had said to.
         It took me to where you type your e-mail and press DOWNLOAD. I did. And guess what?
         It said "Thank You for Downloading iTunes!". I waited for it to install onto my computer; but, it never did. I started googling every possible thing. It said to go into the control panel and uninstall iTunes completely. And reinstall it onto the computer. I did, and went back to Apple and downloaded it again; but, it still won't install onto the computer.
         So now, I don't have iTunes 11.1 or my older version. Everythings gone!
    *Hairs are being pulled out, as I've been on the computer now for over 4 hours*
         Someone, ANYONE! Please help?!

    Here is the solution:
    https://discussions.apple.com/thread/5820931
    I found this in another apple forum: https://discussions.apple.com/message/24615064?tstart=0#24615064?tstart=0

  • I have just purchased a subscription of Acrobat XI Pro, which I installed in my computer a long time ago, when I first tried it. Alas, I cannot open the application, which keeps asking me for a serial number I have not yet received. What the hell is going

    I have just purchased a subscription of Acrobat XI Pro, which I installed in my computer a long time ago, when I first tried it. Alas, I cannot open the application, which keeps asking me for a serial number I have not yet received. What the hell is going on?

    [discussion moved to Acrobat Installation & Update Issues forum.]

  • HT1386 how can i sync only my contacts thru my computer but everything else with icloud

    I have XP, how can I sync only my contacts thru my computer (with Itunes) but keep everything on Icloud backup?

    1st make sure that iTunes will not sync iPhone automatically
    on iTunes go to Edit>preferences> Devices > check "prevent iDevice from syncing automatically"
    >connect iPhone to PC
    > on iTunes click your iPhone's name
    > then untick everything you don't want to be synced line music,movies,apps,calendars, mails
    leave 'sync contacts' ticked
    then you should be fine

  • Unfortunately I have deleted my entire itunes library and back up from my computer, is there any way I can copy my ipod nano back onto my computer into the itunes library? and re-download all the tunes I have purchased  from I tunes.

    Unfortunately I have deleted my entire itunes library and back up from my computer, is there any way I can copy my ipod nano back onto my computer into the itunes library? and re-download all the tunes I have purchased  from I tunes.

    Hello bigali,
    Your options are kinda limited. I would use this first:
    Downloading past purchases from the App Store, iBookstore, and ...
    Then check here for the non-purchased items:
    https://discussions.apple.com/thread/2452022
    You want to rebuild the library first, then sync the ipod.
    Here is a good idea for when your done:
    How to back up your media in iTunes
    Hope this helps.
    ~Julian

  • What can prevent NI-DAQ from installing on a computer?

    What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.

    duane wrote:
    What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.
    I was able to remedy problem by using windows explorer to view ni-daq cd and run the nidaq.msi in the nidaq dir. Going this route caused a user window to appear that allows you to remove all / repair etc. I selected the remove all option which then removed whatever had been installed on previous installation. I then went the usual route of control panel\settings\remove s/w to remove the MAX. I then went back and ran setup.exe in the nidaq cd root dir and everything installed properly. The key was the first step mentioned above. The control panel\settings\remove s/w display did not show ni-daq evidently due to prior improper installation which prevented uninstalling this way. The autorun feature of the ni-daq cd did not deal with the improper installation because it would simply say it successfully installed when it did not install any thing. The original installation that improperly installed the ni-daq was when I installed the labview full development system. Everything else installed correctly at that time except for ni-daq. Who Knows?

  • If I purchase Adobe Standard, how many computers can I install it onto? And is there any way of buy an additional subscription? i.e. if it can only be installed onto two, is it possible to purchase a third installation?

    The company I work for are looking to purchase Adobe Standard, how many computers can this be installed onto? We need it on three computers so if it is only possible to install it onto two is it possible to install it onto a third computer without having to buy the software twice?
    Thanks

    Hi There,
    We would like to inform you that you can just activate 2 machines with one subscription, however, you can just use one at a time.
    If you wish to use the 3 machine, then, you would have to purchase another subscription with a different email address.
    You would need another email address, because the activation is done via email address and more than two activation on 1 email is not possible.
    Please revert if you need any more information on this.
    Thanks,
    Atul Saini

  • Can't open Logic Pro after having installed Mountain Lion

    After having installed Mountain Lion I can't find Logic Pro (the latest version) back in my programs. I do still find all of my sessions. Trying to open a session a "Basic Content Download" starts. Just before the end of the download the computer asks for my password. After I've typed it and pressed enter the download stops.
    This means I can't open any of my sessions.
    What should I do?
    Thanks for any advice.

    If you used the Mountain Lion installer it will have "migrated" your iWork software to the new system.
    Unfortunately that doesn't always work properly. I had to reinstall mine from the original DVD.
    If you can't find your DVD then you will have to purchase the iWork software individually from the Mac Store.
    Just make sure to completely uninstall your existing iWork from your System first:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
    Peter

  • Can logic pro 8 projects be read on logic express 8?

    I've posted this on the logic pro forum but thought should post it here too:
    So a few weeks ago I went to teach a short one day course in Logic Express 8.... except I've only used Logic Pro 8.....mmmm
    Anyway, with all my projects carefully prepared (without space designers or any non- Express 8 plug-ins) I copied my workshop projects onto the students computers only to find that the .logic file was missing. Eek! The iMacs we were using had Logic express 8 (not pro) on them but for some reason the .logic file was now replaced by a folder - which we figured out was actually the opened package of the logic pro file:
    The folder was always called Lgdoc containing two files: display state & document data
    I've managed to replicate this behaviour on my powerbook which has not got logic 8 installed on it.
    Has anyone else come across this? Has anyone opened a logic pro 8 project in Logic express 8 successfully?
    Is there a way to re-pack a file whose contents are being shown?
    Thanks
    Rounik

    Ok thanks, so I shouldn't have any problem I guess finish the project with logic9. Do u know by any chance if I can have both 8 and 9 running on my Mac?

Maybe you are looking for

  • Photo File Size and Resolution

    In the process of creating a book using iPhoto appeared in the corner. The warning said that the photo was of low resolution. I have scanned a lot of my slides, and the files are 65 Mb, which is too big, and the ones with the warning were around 200

  • Creating Asset Lines from Projects

    Hi All, We have transactions recorded in Projects module which need to be sent to assets module for creation of assets However, the problem here is that they need to create many asset lines from one transaction (400-500 asset lines) Users have been m

  • I want to display invoice details(MIRO) in REPORT

    Hi,    i am new for abap can any one please send code for to display miro details in a report based on below logic. Pass the RSEG-BELNR & RSEG-GJAHR joined together into BKPF-AWKEY to get the MIRO Doc date BKPF-BUDAT, vendor invoice number BKPF-XBLNR

  • Switched from Vision+ to Youview

    Ok new Youview box has arrived but looks nothing like the new one I see on the Webpage think its the old style. Is there a huge difference and is it worth worrying about ?

  • Corporate Directory not working

    We recently changed our DNS servers and the domain suffix used in our environment. We updated the new DNS suffix everywhere we found it. The problem that we have had since we made that change is that the Corporate directory won't come up on the phone