Can non-Administrators login to rpd.?

Hello all,
Can the users who dont have Administrator privilages be able to login to rpd.?
i'm getting a "Logon Failed" error while trying to login with the non-Administrator user
is there any work around for this.?
or any setting options in Administratoion tool?(to enable those users to login)
Thanks in Advance.,
Raghu

Hi Raghu,
When I go through Synchronization steps with LDAP, found:
The special user Administrator and the special group Administrators always remain in your repository and are never removed.
I think Administration privileges are specific to applications (viz. BI Server, LDAP (OID)).
You can check the following (not sure whether it helps):
1. Login only in On-Line mode, while testing the users
2. Check the user assigned Admin privilege in OID after importing into RPD, whether Administrators group checked? (I don't think it will be assigned, just give a try)
3. If he is assigned in RPD too, then he should definitely be able to login
It would be better if anyone sheds some more light.
Regards,
Vency

Similar Messages

Non Administrators can not access Performance Counters

I have a problem with the ColdFusion performance counters in
CF8 - 8,0,1,195765 enterprise version installed on Windows 2003 R2
Standard Edition SP2. The counters appear for administrators, but
they are NOT available for Non administrators that are members of
the "Performance Monitor Users" group. All other perfmon counters
are visible by these users but not the CF8 ones. I do NOT want to
give all users Admin access to my servers, just so that they can
monitor the servers performance! Does anyone else have this
problem?

Hi Charlie, yes this is the same post. I have seen this
technote and have followed the recommendation there but this has
not fixed the issue. I'm using a 32bit CF and OS. The perfmon
counters for CF don't seem to work the same way as the other
perfmon counters do which is NON Administrators must be a member of
the local "Performance Monitor Users" or "Performance Log Users"
group do access perform or perform logs.
Thanks for your reply though!

FIM 2010 R2: Security group management by non-administrators

Hi All,
We have a small set of users (belonging to a particular department) who should be able to login to the portal and manage a select set of groups - the users should be able to add and remove members from these said groups. In most of the cases, the groups
already exist in Active Directory and we bring them into FIM Portal.
I have done the following so far:
a) Created a set of users based on their departments - works fine
b) Created a set of groups that the users in (a) should be managing - works fine
c) Created 3 MPRs (resembling the MPRs that already exist for Group Management by administrators). 1 of these MPRs allows the set of users to read the attributes of the groups in the set in (b). The second allows the set of users to create and delete groups
in the set. The third allows the set of users to "add a value to a multi-valued attribute", "remove a value from a multi-valued attribute", and "modify a single-valued attribute". In the list of attributes, I have included most
of the attributes including "Manually-managed membership". All these 3 MPRs have the grant permission box checked.
I (as a member of the set of users in (a)), can login to the portal, view the groups in set (b), modify the description, add an owner, remove an owner etc. When I try to add or remove a member from a group where I am one of the owners, everything is fine.
BUT, when I try to add or remove a member from a group where I am not listed as an owner, it gives me an "Access denied" error with these details: "The request included members which the requestor is not authorized to add and/or remove from
this group"
I am a member of the set in (a) and can remove/add members from the groups that I am the owner of. My questions are:
A) What else do I need to do to add/remove members from a group that I am not the owner of but this group still belongs to the set (b).
B) Why does the Portal force me to add an owner to every group that of set (b) that I click to view/edit. Isn't there a way around that i.e. not having to put any owner and still be able to add/remove members. For all the groups in set (b), the Join Instruction
is set to "None" (i.e. any user can become a member of the group).
I hope someone can shed some light on this. I have seen similar questions on the forum from a few years ago but they hadn't been answered (completely).
Thanks

Hello,
this is because there are to MPRs which Trigger a Group Validation Workflow (Requestor Validation).
These 2 MPRs are responsible:
- Group management workflow: Validate requestor on add member to open group
- Group management workflow: Validate requestor on remove member
The MPR Triggers this workflow for "All Non-Administrators".
So you should edit the All Non-Administrators" Set and add the following to it:
ResourceID not in (your set in a).
So the Requestor Validation workflow will no longer be triggerd for your users in Set (A)
Regards
Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

After upgrading to 10.5.3 I can no longer login to my RedHat ES4 shares

Hello,
I am a new Mac user so please forgive me if there is a simple answer to this question...
Since I installed the 10.5.3 update over 10.5.2 I can no longer login/connect to my RH ES4 (SMB Version 3.0.10-1.4E) shares. I can still login to my CentOS 5 (SMB Version 3.0.25b-1.el5_1.4) and my older RedHat 7.3 (SMB Version 2.2.3a) shares, as well as a few windows shares, without any problem. It is just the RH ES4 shares that I can no longer connect to.
For legacy purposes I configured SMB on both my MacBook Pro and the above mentioned servers to use plain text passwords. To do this on my MacBook this I created nsmb.conf in /etc which contains the following...
[default]
minauth=none
Everything worked perfectly minutes before the upgrade to 10.5.3 and nothing else in the network, software or hardware, has changed.
Any help would be greatly appreciated.
Thanks,
Tom Boilard

Welcome to the forums... unfortunately SMB issues are not fully mainstream.
Anyhow, I have scanned the change log of files touched by the update (searching for SMB - original list courtesy of Rixstep). This yielded:
/Library/Preferences/SystemConfiguration/com.apple.smb.server.plist
/private/etc/smb.conf
/System/Library/CoreServices/SmbFileServer.bundle/Versions/A/Resources/DesktopDe faults.plist
/System/Library/LaunchDaemons/com.apple.smb.server.preferences.plist
/System/Library/LaunchDaemons/com.apple.smbfsloadkext.plist
/System/Library/LaunchDaemons/smbd.plist
/private/etc/smb.conf.template
/System/Library/Extensions/smbfs.kext
/System/Library/Extensions/smbfs.kext/Contents/CodeDirectory
/System/Library/Extensions/smbfs.kext/Contents/CodeRequirements
/System/Library/Extensions/smbfs.kext/Contents/CodeResources
/System/Library/Extensions/smbfs.kext/Contents/CodeSignature
/System/Library/Extensions/smbfs.kext/Contents/Info.plist
/System/Library/Extensions/smbfs.kext/Contents/MacOS/smbfs
/System/Library/Extensions/smbfs.kext/Contents/Resources/load_smbfs
/System/Library/Extensions/smbfs.kext/Contents/version.plist
/System/Library/Filesystems/smbfs.fs
/System/Library/Filesystems/smbfs.fs/Contents
/System/Library/Filesystems/smbfs.fs/Contents/Info.plist
/System/Library/Filesystems/smbfs.fs/Contents/Resources
/System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj
/System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj/InfoPlist. strings
/usr/lib/sasl2/smb_lm.so
/usr/lib/sasl2/smb_nt.so
/usr/lib/sasl2/smb_ntlmv2.so
/private/var/db/smb.conf
Items highlighted in bold could be relevant.
Have you checked that your entry in nsmb.conf is intact? If it is, could it be overridden by a change to one of the other conf files (or a plist)?

Whenever I launch firfox through non admin login, I get an alert message.

Whenever I open firefox through non admin login, I get following alert message. "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
After this, firfox opens but whenever I go to any web page having secure connection like orkut, facebook etc. firefox crashes. It works normally through admin login.
== This happened ==
Every time Firefox opened
== I suppose this started when I updated it to latest version i.e. 3.6.8 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Thankyou, for contacting Mozilla Firefox, Please join us on live chat so we can better assist you with your issue.

Dreamweaver CS5 will not open. It shows the splash screen and terminates with non admin login

Dreamweaver CS5 will not open. It shows the splash screen and terminates with non admin login but works fine with admin login.
OS - WinXP Sp3
Things I tried.
1) Gave full rights on dreamweaver folder in program files.
2) Disabled welcome screen
3) Updated to Dreamweaver CS5 11.0.4
4) Reinstalled
5) Formated PC
But issue persists, please help.

Have you tried deleting or renaming the Dreamweaver configuration file?
See http://forums.adobe.com/thread/494811
This can solve many problems and create one in that any snippets that are installed are lost, but you can get them back. Instead of deleting the config file, just name it config.old. When your system is working, just copy the snippets from the .old file to the new one.

Non-secure login for 5.0 ip services

How do I change to non-secure login on phones for ip services in 5.0?
Thanks,
Andy

This gives you access to all your subscribed services without logging in every time. Keep in mind that anyone can access your information if your login mode is set to non-secure.
you need to use the SCCP Phone Security Profile in Callmanager 5.0
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080645855.html

How to Export Non-Administrators Local GPO for import on a different PC

How to export Non-Administrators Local Group Policy and import on another PC?
All articles for exporting local GPO say to copy the C:\Windows\System32\GroupPolicy and C:\Windows\System32\GroupPolicyUsers folder to another PC however that only works for changes done to the "Local Computer" or "User" (if you
alter the SIDs to match), respectively. It doesn't work to import Non-Admin Local GPO.
There are several requests for this you can find when searching and no solutions provided.

Hi,
For manage local GPO, we could take use of the LocalGPO tool included in the SCM.
LocalGPO allows you to manage the local group policy objects (LGPO) on non-domain joined computers. You can use LocalGPO to backup the LGPO from a stand-alone machine. You can also use it to apply the settings from a GPO backup to other computers, this includes
GPO backups created by LocalGPO, SCM, or the Active Directory Domain Services GPO backups created with the Group Policy Management Console.
Here is a good article talking about it:
SCM v2 Beta: LocalGPO Rocks!
And here is a thread for reference:
Using LocalGPO.wsf for standalone PC's
Best regards
Michael Shao
TechNet Community Support

Backup & Restore non-administrators Group Policy Settings

Hi,
I'm trying to setup a few reference images of Windows 7 which will be deployed to our client computers. The baseline Group Policies are configured through Local Group Policies set in the image. I've setup a Master GPO machine on which to build the policies
and test them.
The Local Group Policies have been set for Local Computer Configuration, Local User Configuration and for Local Non-Administrators Configuration. The thinking is that members of the local Administrators group on the computer are unrestricted and still have
the ability to do most things. Users which log onto the computer abide by the more restrictive Non-Administrators Group Policy settings.
Using the "LocalGPO.wsf" script I'm able to backup and restore Computer and User Configuration which affects all users of the machine but it does not backup the Non-Administrators Policies. Is this possible?
After some digging around in the "GPOPack.wsf" files I've found that the Machine & All Users Policies are restored by the "LocalPol.exe" file. This utility has command line switches for '-m' machine and '-u' user. So I'm guessing
that it's not possible to restore the Non-Administrators Policies?
For what it was worth I've tried copying the "Registry.pol" file from "%windir%\System32\GroupPolicyUsers\S-1-5-32-545\User" folder on the GPO Master machine and placed the file in the same location on target computer. A test which had
one value set worked on the reference computer but when the policies were copied form the GPO Master machine, the target computer ignored all the settings.
Any ideas how to backup/restore Local Machine Non-Administrator Group Polices?
Thanks!

Not entirely sure of the specific policies you're dealing with, but you would typically use the Microsoft Security Compliance Manager to create GPO packs that you would then apply using the Apply Local GPO Package task sequence step in MDT.
I'd encourage you to look over the Applying Group Policy Object Packs section of the
Using the Microsoft Deployment Toolkit.docx file in the MDT 2013 documentation for more details.
MDT 2013 documentation can be downloaded here: LINK

I'm trying to use Mountain Lion Server so my family can have separate logins via Screen Share to their iTunes.

Using Mountain Lion Server so my family can have separate logins and connect via Screen Share.
Works great, each has their own home directory and permissions are perfect.
Now setting up iTunes for each with their own Library (not shared), thus keeping multiple Libraries.
I get this;
This Computer is already associated with an Apple ID.
If you download past purchases with your Apple ID, you
cannot auto-download past purchases with a different
Apple ID for 90 days.
What!
So what it is on the same computer, they are completely separate Libraries never to be mixed.
If this works, I only need to keep one computer up and running, instead of three.
Each can do their syncing/backup and connect to the various Airplay/AppleTVs I have around the house.
How do I fix this.
Thanks

Bottom line is you can't - easily.
You need to make sure that you log out of the server each time otherwise the ID is running. To explain, if you had a laptop with different people using it, your solution works fine. Each time someone logs in, the iTunes ID is different so it works as you can only have one person using the laptop at any one time.
Now, turning your problem inside-out, you want people to be able to log into iTunes concurrently to use their own version of the program with their own library. This does not seem to work and you get the conflicted ID error message. Even though iTunes is running under their own login ident, I have never been able to get this working reliably and was told that iTunes is NOT a network-aware application as it is designed to be single user.
The way I got around this was to login as XYZ and to make sure that the ID was changed in iTunes accordingly. However, it did not always work so I gave up with the whole thing.

Why can't I login with my Apple ID when I try to setup Cloud on my MacBook Pro?

Why can't I login with my Apple ID when I try to setup Cloud on my MacBook Pro?
thanks,
Simon

First question that I am not clear on your answer about: Is the Apple ID itself a valid email address, and the same one that you have as your Primary email address on your account? If the actual Apple ID is not an email address, then that is why you are not able to sign on to iCloud or to verify it....it must be an email address.
If it is an email address then:
Update your OS to the latest version - 10.8.5
Once you have updated, reboot the Mac and then go to Preferences>iCloud and try to sign on with your Apple ID again.
Check Manage your Apple ID to make sure that your Apple ID/Primary email address is verified.
If the problem persists, contact iCloud Support to see if they can provide you with an explanation of the meaning of the message. If the Apple ID has already been verified, then I'm not sure why you would be getting this messge:
https://getsupport.apple.com/Issues.action
Cheers and best of luck!
GB

Why can't i login with the account i just created???? I am missing an important session!!!!

why can't i login with the account i just created???? I am missing an important session!!!!

Hello ljp1,
What browser are you using to log in to your brother account? It could be a problem with some settings within your browser that is giving you grief.
Try going through these troubleshooting steps to see if it helps resolve the issue.
http://goo.gl/TTH2s
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

After login but before I can access the internet I get a request for my login password so that - aosnotifyd - can access my login key chain. How can I get it to remember my password?

After login but before I can access the internet I get a request for my login password so that - aosnotifyd - can access my login key chain. How can I get it to remember my password?

Rephrase your question. Do you mean you keep getting login key chain errors?

Can't access login page in IE

Hi,
Some of my participants/customers, from the same
organization, can’t access the login page when they are going
to participate in a meeting. They can access the login screen for
Connect Pro Central but not for the meeting. For example the can
access
http://wezupport.emea.acrobat.com
but not
http://wezupport.emea.acrobat.com/support.
They just get a message that the site cannot be displayed. This
happens with Internet Explorer (6.0) but not with Firefox.
Has anyone experience this problem?
Dan

Björn, I too log in from Sweden and have the same issue: open the forums' page, log in and I am sent automatically to the "sorry, this page is not available" alternatively I get an error 404. As soon as I am sent to the "sorry, this page is not available" I too get automatically loggen in, but if I go back to the forums page (doesn't matter how, if I refresh, go back or open in a new window), I am not inlogged and the process continues.
I have to go through that at least 3 times before this jumping to and fro ends and the forum recognizes me.

HT1631 updated to the new os x mavericks, now i'm having problems with my keychain access...everytime i asked to log in but when i do, it says can't find login items even if i reset it. what should i do?

updated to the new os x mavericks, now i'm having problems with my keychain access...everytime i asked to log in but when i do, it says can't find login items even if i reset it. what should i do?

Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel

Can non-Administrators login to rpd.?

Similar Messages

Maybe you are looking for