Can not add my new printer to the print and scan preferences

I have purchased a Canon Pixma MG5350 and try to connect it to my mac but with no results. I have installed all the drivers but can not add it to the print and scan preferences. I looked in Applications > Utilities > System Information > USB and it does not even show that it is connected. The printer comes without a USB so I bought a 5m USB 2.0 A to B cable and eventually something is wrong. Is the USB too long, not the right one or what is the problem?

I have already got my refund for the cable! I tried a friends cable and everything works!

Similar Messages

Can not add a new member to the existing log group.

Dear all,
I just want to multiplex the online redo log to different devices for security reason. I just have one member for each group. So I want to use this command to add a new member.
alter database add logfile member '/u02/oracle/oradata/TEST/redo01.log' to ('/u01/app/oracle/oradata/TEST/redo01.log')
or
alter database add logfile member '/u02/oracle/oradata/TEST/redo01.log' to group 1.
But both commands failed with error pasted below:
ERROR at line 1:
ORA-19510: failed to set size of 102400 blocks for file "/u02/oracle/oradata/TEST/redo01.log" (block size=512)
ORA-27045: unable to close the file
Linux-x86_64 Error: 5: Input/output error
Additional information: 4
Do you know what caused this problem?
Thanks,
Ricky

I just want to multiplex the online redo log to different devices for security reason. I just have one member for each group. So I want to use this command to add a new member.Not a BAD idea.. :)
ERROR at line 1:
ORA-19510: failed to set size of 102400 blocks for file "/u02/oracle/oradata/TEST/redo01.log" (block size=512)
ORA-27045: unable to close the file
Linux-x86_64 Error: 5: Input/output error
Additional information: 4It is running out of space. check the required space on mount point /u02 , if not you can create in another mount point as per your requirement.
THanks

I can not add a new credit card to my iPad without having to block directly with the bank card I'm using.

I can not add a new credit card to my iPad without having to block directly with the bank card I'm using.

What does this mean..?
Gaby0526 wrote:
... without having to block directly with the bank card I'm using.
Changing Account Information > http://support.apple.com/kb/HT1918
Accepted forms of payment > http://support.apple.com/kb/HT5552
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Can not add a New appointment to a shared calendar in Outlook 2010, can only add a New Meeting.

Hi
I can not add a new appointment to a shared calendar in Outlook 2010. I can see the calendar and appointments in it (all appointments are marked as busy, the detail can not be seen. I want it to do this) and I can and a New meeting to the shared calendar
but I can not add just an appointment.
I do not want e-mail being sent to the owner of the shared calendar everytime I add something.
When I view the appointment that im creating in the shared calendar the New appointment button is greyed out but the New meeting button is available.
The permision on the shared calendar for the user is:
Custom
Read = none
Write = create items, create subfolders, edit own
delete = Own
Other = folder visable
Thanks
contributor permission in outlook 2010 calendar does not work, I have given this as permision but issue is the same. We currently connect to an exchange server 2003;

Hi Cmrl,
Does it happen when you create an appointment via OWA?
Does it happen when you create an appointment via Outlook 2003?
Do you have any mobile device?
How many users encountered the issue, all users or some user?
At first, I suggest you recreate outlook profile.
At second,
use PFDAVAdmin
to correct any problems found.

I can not add a wmv file to the library. It is not protected

Can not add a video file to Itunes library and even when I try to open the video using "open with Itunes", Itunes start but instead of the video I see the music library

iTunes cannot play nor convert WMV files. You'll need to use a third-party application to convert the video to a format iTunes can accept.
http://support.apple.com/kb/HT2729
Regards.

HT1296 I can not add a new contact to contact list from last calls

I can not add a new contact to contact list from last calls

That's nice. Thanks for telling us. Maybe you would actually like to ask a question????

Need to add a new release of the segment and maintain that version

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 4.6C. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
I suggested by that
*You can only edit segments in the current release. You will need to add a new release of the segment and maintain that version with changes. *
If this is right then
How to do this settings
regards,

'Add version' use this option - a new version will be created in the current release.
then add your field to that and relase it again.
Regds,

How can i add a new function to the Basic IVI class vi's?

I need to use the IVI vi's to control some instruments, let's say a DC Power Supply.
Since there's a DC Power supplyclass, i can used those VI's but waht if one of the VI's does not contains all the functions that i need?. How can i add more functions to the IVI classes?. What do i need to do to add a new function to the iviFGen class?

If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance

Can I add a new trigger to the beginning instead of at the end of a blank composition widget?

Hi guys,
I am creating a photo gallery page using the Blank Composition widget. I want to be able to add new content regularly by adding new photos to the top (beginning) of the gallery so my newest photos show at the beggining of the gallery.
Currently, the little + symbol to add another trigger only adds a new trigger to the right (bottom) of group of triggers, effectively putting newly added content to the back of the gallery instead of at the front. Am I able to get it to add a new trigger to the beginning of the group and have that trigger be the first in the group to display?
All the widget's seem to display this same order behaviour, so I'm quite stuck on how to get around this. I've tried re-arranging the triggers, but that has become insanely cumbersome every time I want to add new photos to the beginning of the group and move the older ones further down the gallery order.
Any help would be greatly appreciated with this, cheers, David.

OK
I'm a newbie.
I have the same problem. I've looked at some recommended 3rd party widgets and they don't do what I want either.
Another method would be to start a nabble.com blog and embed that in to Muse, but then the news would not be seen by web crawlers and benefit your ranking on your own page. (I think)
This is a rubbish work around but, I'm going to add a new news widget every month. I only get 5-6 bits of news a month, so by adding a new widget above the last each time, that will push the old news down the page.
Hope this helps someone.
Jay

Can I add a new page to both phone and desktop in the same respective location? Can this only be done manually?

It appears that once you create your phone site, from that point on, when I add a new page to one layout or the other, the "Page/go to same" command struggles. Can I create a new page and have it automatically create a matching placeholder page on the alternate format/site plan?

Hi
To answer your query, I am afraid you cannot add a new page to both phone and desktop in the same respective location. You need to manually do the same.

I have lost the capability with the new upgrade to add a contact to favorites....the "add to favorites" is gone. My contacts that I had added previously are still favorites...I just can not add a new one?????

With the newest upgrade, I no longer have the button "add to favorites" ???? So How do I add a contact to favorites...all the contacts previously added still have the little blue star next to the number...but I can not find how to add another contact to favorites.

Thanks that solved it for me...your awesome

Where are all my bookmarks? I have done all the checks in the FAQs. still no bookmars and I can not add any new ones to replace the lost ones either

After number two daughter "played with" this 'puter. I have lost all my long and well established bookmarksl The bookmark tab no longer displays a dropdown list of the web addresses trhat it always has done in the past. just a useless blank page with meaningles divisions.
I have tried to reinstall the bookmark by importing them from a previous HTML file and I have tried restoring them from a JSON file, both of which are up to date as of this morning.
Nor can I rebuild the data because I can no longer add any bookmarks
I have even uninstalled and reinstalled the latest version of Firefox. Still nothing. If this is a result of an automatic upgrade, the words "chocolate teapot" spring to mind.
If this is the work of number two daughter, then it is no Father Christmas this year unless you can restore my missing bookmarks to their previous glory, and quickly.
(The bookmarks are still in the HTML file and I could use them at a pinch. But why should I have to swop between two programmes when up until now they have worked perfectly?)

Progress report - Curiouser and curiouser! I reloaded Firefox having completely cleared out previous(uninstalled and cleared our all registry references)
After reload I put the bookmarks HTML file in the Mozzilla folder and ran Firefox. After five or six seconds, it sprang into life complete with all the old bookmarks in place and all useable. I have since tried to add one more and now they have all vanished again!!!!!!!
So far I have followed all the suggestions in the Mozzilla "do this to repair the problem" pages on the web. Uninstalled and reinstalled three times, run various 'repair' programmes including the ones directly dowloaded from the Mozzilla website. Used the 'go back to previous saved data' option and reloadedm the data from a previously saved HTML programme. Done all this more than once, only to be back where I started with no bookmarks, and no SQLITE file nor folder found on any hard drive.
The 'puter is sitting behind a hard wired firewall (old computer acting as firewall) plus a good anti virus and firewall software programme running as well. I don't think I've been hacked but I am beginning to wonder. Twice is coincidence, more than three time sounds more like enemy action!
Strange that everything worked following the last reinstall, only to vanish again when I tried to add one more bookmark

How can you add a new rule in the inspector?

I've grown very accustomed to the Chrome developer tools, and I've recently decided to try out Firefox.
Best I can tell, you cannot add custom rules in the Firefox inspector tab. For instance, if I inspect the element on an image in Firefox, I am given all the defined styles (rules) for that element. I can, of course, edit those defined styles. However, it does not give me an option to add my own custom styles unless I jump over to the 'Style Editor' tab and write them in manually. This becomes a problem when I want to write in a quick :hover or a :first-child or reference any other selecter that's not already defined.
In Chrome, not only do I add/remove/change styles directly in the Inspector, but it also saves a custom inspector stylesheet for me with all the changes I made.
Chrome example: http://cl.ly/Wm56
Firefox example: http://cl.ly/WmUP
Is there any way to add custom styles directly from the inspector tab in Firefox?
Thanks!

You will notice an element {} item at the top of the Rules list in the right plane.
You can click between the curly brackets {} to enter a new inline rule for this element.
You can do this within other rules {} as well.
Type the colon to separate the property name and value.
That is easier than adding a style attribute in the left pane or editing a style sheet file.
That should work as well as rules added this way show as a style rule.
*https://developer.mozilla.org/Tools/Page_Inspector

I Can not add a new playlist to iphone5 or sync playlist's between imac and iphone5

I have OS X Mavericks on my imac and 70.03 on my iphone5
I bought some new songs from itunes and made a playlist on my imac itunes
I plugged my phone to my imac and tried to add the new playlist to my phone but it wouldnt be added
Furthermore,I clicked iphone on my itunes on my imac and tred to remove (unclick) all playlists but after I pushed synce and it looked like it was going to work,all the playlisys stayed on the iphone
Now I cant add or remove playists from my iphone
When I unclick all the playlists,it says I have 7 Gs on my phone,after the syncing i says I have 2 Gs which means its reading the iphone and the small amount of space left because of the playlists(which I can not remove)
I just updated my iphone5 and my imac
Im in Canada and I think the system is the same around the world
Any sugegstions folks ?

also,I have itunes 11.1.2

How can I add a new section to the beginning of a song project?

I've been trying GarageBand on my new iPad 3 as a practice aid. I laid down some guitar cords, then dupped some sections until I got a whole 64 bar song. Now, how the heck do I add a couple of intro bars? If I try to add a new two bar section, it always stays stuck at the song end. If I stretch section 1 by a couple bars, it adds the bars at the end of section 1, repeating the last cords, not very useful.

If you open the section menu there is a tool consisting of three parallel lines. Tap this to reorder the sections.
tt2

Can not add my new printer to the print and scan preferences

Similar Messages

Maybe you are looking for