Can not bring the db up ORA-24324 ORA-01041

Hi,
I have shutdown immediate 9.2.0.3.0 database using oracle enterprise manager; and after the shutdown was running i was not able to use it any more, so when i used sqlplus it is giving me the below erorrs when i try to startup / shutdown again:
SQL> startup
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> shutdown
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
what shall we do?
Thanks in advance

Your sqlplus path is not set properly. Include ORACLE_HOME/bin in your environment PATH variable and try.

Similar Messages

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for hel

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for help from you I will make the iphone does not open e-mail address associated with it @hotmail.com mail to this address icloud iphone phone's password is forgotten, I want to thank you in advance for your help tell a method of opening up again.
<Email Edited by Host>

Welcome to the Apple Community.
I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
Apple Topluluk hoş geldiniz.
Ben düzenlenebilir için e-posta adresi için istedi. Açık bir konu adres gönderme istenmeyen e-posta ile bombardıman bir emin yoludur, bulmak için otomatik algılama yazılımı için, size sorunu giderilmiştir sonra burada uzun olacak unutmayın.
Eğer insanlar sizinle iletişim istiyorsanız, başkalarının profilinizde e-posta adresinizi görmelerini sağlar.
Bu özellik onları çalıntı olduğunu bu işe yaramaz çalıntı telefonları için getirilmiştir.
Ancak aynı zamanda kullanıcı Apple ile Apple ID ayrıntıları değişti ve iCloud hesabı için aynı değişiklik yapmamış ortaya çıkar / iOS 7 yükseltmeden önce cihaz üzerinde My Phone bul olabilir.
Tek çözüm My Apple ID de Apple ile önceki durumuna geri Apple ID değiştirmek için, değişiklikleri doğrulamak cihazınızda talep olarak, şifreyi girin ve sonra kapatın "benim telefon bulmak".
Daha sonra tekrar bugünkü durumuna Apple ID değiştirmek gerekir, bir kez daha doğrulamak cihazınızdan iCloud hesabı silmek ve daha sonra mevcut Apple kimliği kullanarak oturum açın. Son olarak, geri bir kez daha üzerinde "benim telefon bulmak" açın.

Can not view the code for views, triggers or table definition

Hello Gurus,
I can not see the code for any of the triggers, views, tables etc. in sql developer. For instance a view code will be
"create or replace" and then nothing, I could see the code in the past.
When clicking on SQL tab for table I get following errors
1. Ora-00904 Invalid Column name
2. Ora-31600: invalid input value emit_schema for parameter name in function SET_TRANSFORM_PARAMORA-06512: at SYs.DBMS_SYS_ERROR............................
please advice.
Thanks

Sqldev was only certified starting from 9.0.2, so it's possible that's the culprit. The latest update in the certification document even omits 9i entirely.
Did it start happening after upgrading sqldev? What version are you on?
K.

Can not open the ebs form

This issue is that i can not open the form ,I checked the application.log,find erro:
09/04/24 12:21:50.201 10.1.3.0.0 Started
09/04/24 12:21:51.470 formsweb: FormsServlet init():
configFileName: /oracle/prod01/inst/apps/PROD01_erp199/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/04/24 12:21:51.479 formsweb: 10.1.3.0.0 Started
09/04/24 12:34:28.975 formsweb: ListenerServlet init()
09/04/24 12:34:30.17 formsweb: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
09/04/24 12:34:30.17 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms 会话 <1> 在启动过程中失败: 没有来自运行时进程的响应
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRe
questDispatcher.java:702)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(
ServletRequestDispatcher.java:359)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpR
equestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpReq
uestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
ava:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.j
ava:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(Re
leasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
here is another erro :
/oracle/prod01/inst/apps/PROD01_erp199/logs/ora/10.1.3/opmn/forms_default_group_1、formsstd.err
Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declarati
on was not found in application.xml.

Thank you hsawwan ,I did it as your methods,and i also checked your thread,but I still have the same problem.
when I start the formserver ,here is the erro:
[[root@erp29 ~]# more /oracle/prod/inst/apps/PROD_erp29/logs/appl/admin/log/adformsctl.txt
adformsctl's LOG:
04/28/09-09:04:52 :: adformsctl.sh version 120.12.12000000.3
04/28/09-09:04:52 :: adformsctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:55 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:55 :: adformsctl.sh: exiting with status 150
================================================================================
adoacorectl's LOG
04/28/09-09:04:51 :: adoacorectl.sh version 120.11.12000000.2
04/28/09-09:04:51 :: adoacorectl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:51 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:52 :: adoacorectl.sh: exiting with status 150
================================================================================
adapcctl's log
04/28/09-09:04:51 :: adapcctl.sh version 120.6.12000000.2
04/28/09-09:04:51 :: adapcctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
04/28/09-09:04:51 :: adapcctl.sh: starting OPMN managed OHS instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=erp29:6200
no processes or applications matched this request
04/28/09-09:04:51 :: adapcctl.sh: exiting with status 150
================================================================================

My phone is no wifi. I can not select the button. this situation has happened to me several times and I have spent lots of money on repairs. what can I do?

my phone is no wifi. I can not select the button. this situation has happened to me several times and I have spent lots of money on repairs. what can I do?

Bring your phone to Apple for evaluation and replacement. It's broken. There's no magic we can provide you.

Can not startup the oracle db after reboot

Hi.
I have an Oracle 10g DB running on Linux9 server. It works well before I reboot the server this morning. I can not startup the db.
$ sqlplus /NOLOG
SQL> CONNECT sys/password AS SYSDBA
Connected to an idle instance.
SQL> STARTUP
ORA-17503: ksfdopn:2 Failed to open file +DATADG/orcl10g/spfileorcl10g.ora
ORA-15055: unable to connect to ASM instance
How can I do to restart the db??
Any hints are highly appreciated.
Qian

Yes, it seems all right. But the real problem is: after I start listener,
Oracle Enterprise manager 10g Fatabase Control and iSQL*Plus, I can not connect to the http://localhost:5500/em. The Alert says: The connection was refused when attempting to contact localhost:5500.
I can connect to the iSQL*Plus. I mean, the http://localhost:5560/isqplus/, but can not login. The Error says: ERROR-ORA-12514: TNS: listener does not currently know of service requested in connect descriptor.
When I see the status of listener,
The Alert of listener says:
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for linux: Version 10.1.0.2.0-Production
Start Date 18-JUL-2006 11:29:31
Uptime 0 days 0 hr. 0 min. 0sec
Trace level off
Security ON :Local OS Authentication
SNMP OFF
Listeneer Log File /opt/oracle/product/10.1.0/db_1/network/log/listener.log
Listener Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=flulinux01)(PORT=1521)))
Service Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully.
I don't know which part is wrong. This morning all things work well....
And How can I check the db is startup? If the db is started, can I use sqlplus even without listener?
Qian

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

How can I bring the recordset count inside the same recordset?

I have a query inside a procedure where I'm paging the results.
I dont know how to bring the total results inside the recordset.
How can I bring the recordset count inside the same recordset?
SELECT *
FROM ( select a.*, rownum rnum
     FROM (SELECT
          FROM table
          ORDER BY id DESC) a
     WHERE rownum <= pg*50 )
WHERE rnum > (pg-1)*50

My query is much more comples, so that is why I'm using the other script.
When I included the "COUNT(*) OVER() tot_cnt AS total" it didn't worked:
ORA-00904: "TOT_CNT": invalid identifier
What is the tot_cnt?
SELECT *
FROM (SELECT a.*, rownum rnum
FROM (SELECT
ed_fotos.id AS COD_FOTO,
ed_fotos.arquivo AS NOM_ARQUIVO,
ed_areas.nome AS NOM_REDACAO,
COUNT(*) OVER() tot_cnt AS total
FROM edt.ed_fotos ed_fotos
INNER JOIN edt.ed_volumes ed_volumes ON ed_volumes.id = ed_fotos.volume_id
INNER JOIN edt.ed_caminhos path_alta ON path_alta.id = ed_volumes.caminho1
INNER JOIN edt.ed_caminhos path_baixa ON path_baixa.id = ed_volumes.caminho2
INNER JOIN edt.ed_areas ed_areas ON ed_areas.id = ed_fotos.redacao_id
ORDER BY id DESC) a
WHERE rownum <= 200 )
WHERE rnum >= 100

I can not load the Oracle Applications Home Page E-Business Suite

I install ebs 12.1.1 on windows server 2003 and I can not load the Oracle Applications Home Page (http://ebsoracle.workshop.cl:8000)
What could be the cause?
Is there a log with information about this failure?
I check the host file and this is correct
Help me please.
Thanks.

I install ebs 12.1.1 on windows server 2003 and I can not load the Oracle Applications Home Page (http://ebsoracle.workshop.cl:8000)
What could be the cause?What is the error?
Is there a log with information about this failure?
I check the host file and this is correctCheck Apache log files (error_log* and access_log* under $LOG_HOME/ora/10.1.3/Apache directory).
Also, run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

If I go to PS and add layers can I bring the photo with layers back to Lightroom?

If I go to PS and add layers can I bring the photo with layers back to Lightroom?

JoeKostoss wrote:
This is more complicated than I expected: I had to go back to LR to check what I did previously. Here is what I found. I hope this helps to explain what can be done. You can have both layers and LR adjustments; you just cannot see the layers in LR nor can you see the LR adjustments in PS. The good news is that they are both there and can be changed as needed.
I have a photo (Raw) of a blue jay sitting on a branch with the background out of focus.
I made many of the usual LR edits such as exposure, contrast, whites, blacks, sharpening, etc.
I wanted to print it as a Birthday Card so I sent it to PSCC 2014 as a smart object.
In PS, I added a type layer "Happy Birthday"
Back in LR, I now have a psd Happy Birthday file stacked with the original raw file.
Fine and as yet, no ADDITIONAL LR edits AFTER rendering right?
I made some LR adjustments to the psd file such as crop to a different aspect ratio and add a vignette.
I printed the psd file on a folded card.
So far so good, you're still in LR. LR can take the new edits made there AND the layers and spit out a print. Nothing new or special here.
Later I wanted to use that same image as a anniversary card.
I told LR to edit that same psd file in PSCC 2014, this time not a smart object, but selecting "Edit Original".
You got your original layered file. Nothing new or special here.
PS opened with the "Happy Birthday" type layer intact and with the smart object background layer. Of course, the LR edits, crop and vignette on the psd file were not visible in PS.
Because they don't exist there! They will when you render them.
I clicked the eye of the Happy Birthday to render it invisible.
I added a new "Happy Anniversary" type layer.
Saved the new revised psd file and returned to LR.
In LR, I still have only 1 psd file stacked with the original raw file, but now it says Happy Anniversary. Note: sometimes it may take a few moments for the new PS edits to appear. By selecting another image and then reselect this psd file tends to speed this rendering of the new image.
So where in all this is the LR edits you produce AFTER up created the layers after opening the layered doc in PS?
I now have a new card ready to print just as before with all the LR edits originally made on the birthday card including the LR edits, crop and vignette made on the original psd file.
And as far as I can tell, all those edits were applied in PS AFTER rendering.
If I send that psd file a third time to PS, I still have the smart object layer, and both type layers. I can add a 3rd type layer "Happy Easter" if I so desire and return to LR.
Again, the crop and vignette are seen in the one psd file in LR.
So...yes, I can have both layers AND LR adjustments including the original raw adjustments through the smart object background.
No, you have a layered file and you have instructions but the layered file isn't rendered with those instructions and doing so would flatten the results.

Can not start the isqlplus

I am a beginner and can not open the http://homer:5560/isqlplus page ? Any solutions ? I could open it when I installed Oracle 10 on Solaris 10 - x86 system
Thanks

I can see that the db is up But when I start the listener I can see the port 1521 but when I have the login screen of oracle I open the web page using : http://homer:5560/isqlplus/login.uix
oracle @ Homer /export/home/oracle/database>ps -ef | grep pmon
oracle 1188 995 0 18:59:15 pts/3 0:00 grep pmon
oracle @ Homer /export/home/oracle/database>$ORACLE_HOME/bin/lsnrctl start
LSNRCTL for Solaris: Version 10.2.0.2.0 - Production on 11-MAY-2011 18:57:36
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /opt/oracle/102/bin/tnslsnr: please wait...
TNSLSNR for Solaris: Version 10.2.0.2.0 - Production
System parameter file is /opt/oracle/102/network/admin/listener.ora
Log messages written to /opt/oracle/102/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Homer)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.2.0 - Production
Start Date 11-MAY-2011 18:57:42
Uptime 0 days 0 hr. 0 min. 2 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/102/network/admin/listener.ora
Listener Log File /opt/oracle/102/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Homer)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
oracle @ Homer /export/home/oracle/database>$ORACLE_HOME/bin/isqlplusctl start
iSQL*Plus 10.2.0.2.0
Copyright (c) 2003, 2005, Oracle. All Rights Reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Edited by: user513296 on May 11, 2011 10:03 AM

Why can not scp the spfile to another host?

Why can not scp the spfile to another host?
The hostp is physically connect with hosts with a router. Both are RHEL5.0 OS. I copied some files from hostp to hosts successfully a few days ago. But it not work today. The SSH is disabled on both hosts.
[oracle@hostp db10g] $ cd $ORACLE_HOME/dbs
[oracle@hostp dbs] $ ls
hc_db10g.dat init.ora orapwrcatalog spfilercatalog.ora
hc_rcatalog.dat lkDB10G snapcf_db10g.f
initdb10g.ora lkRCATALOG snapcf_rcatalog.f
initdw.ora orapwdb10g spfiledb10g.ora
[oracle@hostp dbs] $ scp spfiledb10g.ora hosts:/u01/app/oracle/product/10.2.0/db_1/dbs/
ssh: connect to host hosts port 22: No route to host
lost connection

I ping the hostp from the hosts, it is reachable; But I ping hosts from the hostp, it is unreachable. The follows are some information for diagnosys.
[root@hostp oracle]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
[oracle@hostp ~]$ ping hosts
PING hosts (192.168.0.3) 56(84) bytes of data.
CFrom 192.168.0.107 icmp_seq=2 Destination Host Unreachable
From 192.168.0.107 icmp_seq=3 Destination Host Unreachable
From 192.168.0.107 icmp_seq=4 Destination Host Unreachable
--- hosts ping statistics ---
9 packets transmitted, 0 received, +6 errors, 100% packet loss, time 7997ms, pipe 3
[oracle@hostp ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.0.2 hostp
192.168.0.3 hosts
[oracle@hostp ~]$ ping hostp
PING hostp (192.168.0.2) 56(84) bytes of data.
64 bytes from hostp (192.168.0.2): icmp_seq=1 ttl=64 time=0.394 ms
64 bytes from hostp (192.168.0.2): icmp_seq=2 ttl=64 time=0.194 ms
64 bytes from hostp (192.168.0.2): icmp_seq=3 ttl=64 time=0.190 ms
--- hostp ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 0.190/0.259/0.394/0.096 ms
[oracle@hostp ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.0.3 hosts
192.168.0.2 hostp

HT1420 I can not find the location of the "authorize" button.

I can not find the "authorize" button on the itunes menu?

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Data blocks in forms 6i, can not see the data

i have built an application in forms with some data blocks. the blocks a connect to some tables in the db. i have built them connectd as "system". but when i run the applicatio as user x i can do select, insert, update, delete, but i can not se the records in the datablocks (they are empty), but i can do all transactios. why?

First of all, developing from the System schema is not a good idea.
Who owns the tables your form is connecting to? The table owner should create a public synonym for each table name, and also needs to grant user x access to the table.

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

Can not bring the db up ORA-24324 ORA-01041

Similar Messages

Maybe you are looking for