Why can not scp the spfile to another host?
Why can not scp the spfile to another host?
The hostp is physically connect with hosts with a router. Both are RHEL5.0 OS. I copied some files from hostp to hosts successfully a few days ago. But it not work today. The SSH is disabled on both hosts.
[oracle@hostp db10g] $ cd $ORACLE_HOME/dbs
[oracle@hostp dbs] $ ls
hc_db10g.dat init.ora orapwrcatalog spfilercatalog.ora
hc_rcatalog.dat lkDB10G snapcf_db10g.f
initdb10g.ora lkRCATALOG snapcf_rcatalog.f
initdw.ora orapwdb10g spfiledb10g.ora
[oracle@hostp dbs] $ scp spfiledb10g.ora hosts:/u01/app/oracle/product/10.2.0/db_1/dbs/
ssh: connect to host hosts port 22: No route to host
lost connection
I ping the hostp from the hosts, it is reachable; But I ping hosts from the hostp, it is unreachable. The follows are some information for diagnosys.
[root@hostp oracle]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
[oracle@hostp ~]$ ping hosts
PING hosts (192.168.0.3) 56(84) bytes of data.
CFrom 192.168.0.107 icmp_seq=2 Destination Host Unreachable
From 192.168.0.107 icmp_seq=3 Destination Host Unreachable
From 192.168.0.107 icmp_seq=4 Destination Host Unreachable
--- hosts ping statistics ---
9 packets transmitted, 0 received, +6 errors, 100% packet loss, time 7997ms, pipe 3
[oracle@hostp ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.0.2 hostp
192.168.0.3 hosts
[oracle@hostp ~]$ ping hostp
PING hostp (192.168.0.2) 56(84) bytes of data.
64 bytes from hostp (192.168.0.2): icmp_seq=1 ttl=64 time=0.394 ms
64 bytes from hostp (192.168.0.2): icmp_seq=2 ttl=64 time=0.194 ms
64 bytes from hostp (192.168.0.2): icmp_seq=3 ttl=64 time=0.190 ms
--- hostp ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 0.190/0.259/0.394/0.096 ms
[oracle@hostp ~]$ cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.0.3 hosts
192.168.0.2 hostp
Similar Messages
-
why can not open the file
On which OS are you working?
Did you see issue in opening pdf in browser or in Application?
You can try upgarding to latest version of Reader via link
http://get.adobe.com/reader/enterprise/ -
Why can not catch the standard BACK event in ALV's USER_COMMAND event,
Hi expert, why i can not catch the standard BACK event in ALV's USER_COMMAND event,
Code:
DATA G_CON_UC_FORM TYPE SLIS_FORMNAME VALUE 'F_USER_COMMAND',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = G_CON_FORM
I_CALLBACK_USER_COMMAND = G_CON_UC_FORM
IT_FIELDCAT = G_TAB_FIELDCAT
IT_SORT = G_TAB_SORT_INF
I_SAVE = G_CON_U
*<<<Liang
IT_EVENTS = G_TAB_ALV_EVENTS
*<<<Liang
TABLES
T_OUTTAB = G_TAB_OUTPUT_DATA
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
*& Form F_USER_COMMAND
ALV USER COMMAND processing
FORM F_USER_COMMAND .
IF SY-UCOMM = '&FO3'.
LEAVE TO SCREEN 0.
ENDIF.
ENDFORM. " F_USER_COMMAND
When I set breakpoint on this subrouting ,and try to click stardard BACK or CANCEL button, the callback form do not run, but if double click one of line of alv report, the callback form works well,
so why??hi
good
check this report and change your code accordingly.
THESE LINES ARE FOR THE MAIN PROGRAM ***
SAP V40B ***
REPORT Z_PICK_LIST .
TABLES: RESB.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS: S_WERKS FOR RESB-WERKS," Plant
S_AUFNR FOR RESB-AUFNR," Order number
S_BDTER FOR RESB-BDTER." Req. date
SELECTION-SCREEN END OF BLOCK BL1.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
DATA: BEGIN OF OUT OCCURS 10,
AUFNR LIKE RESB-AUFNR, " Order number
MATNR LIKE RESB-MATNR, " Material
BDMNG LIKE RESB-BDMNG, " Requirements in UM
MEINS LIKE RESB-MEINS, " Unit of Measure (UM)
ERFMG LIKE RESB-ERFMG, " Requirements in UE
ERFME LIKE RESB-ERFME, " Unit of Entry (UE)
MAKTX LIKE MAKT-MAKTX, " Mat. description
END OF OUT.
INCLUDE Z_ALV_VARIABLES.
INITIALIZATION.
REPNAME = SY-REPID.
PERFORM INITIALIZE_FIELDCAT USING FIELDTAB[].
PERFORM BUILD_EVENTTAB USING EVENTS[].
PERFORM BUILD_COMMENT USING HEADING[].
PERFORM INITIALIZE_VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
AT SELECTION-SCREEN.
PERFORM PAI_OF_SELECTION_SCREEN.
START-OF-SELECTION.
PERFORM GET_ORDERS.
PERFORM GET_MATERIAL_DESCRIPTION.
END-OF-SELECTION.
PERFORM BUILD_LAYOUT USING LAYOUT.
PERFORM BUILD_PRINT USING PRINTS.
PERFORM WRITE_USING_ALV.
FORM INITIALIZE_FIELDCAT *
--> P_TAB *
FORM INITIALIZE_FIELDCAT USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.
ENDFORM. " INITIALIZE_FIELDCAT
*& Form GET_ORDERS
text
FORM GET_ORDERS.
SELECT AUFNR MATNR BDMNG MEINS ERFMG ERFME
FROM RESB
APPENDING TABLE OUT
WHERE XLOEK EQ SPACE " deletion indicator
AND XWAOK EQ 'X' " goods movement indicator
AND WERKS IN S_WERKS " plant
AND BDTER IN S_BDTER " req. date
AND AUFNR IN S_AUFNR. " pr. order
ENDFORM. " GET_ORDERS
*& Form GET_MATERIAL_DESCRIPTION
text
FORM GET_MATERIAL_DESCRIPTION.
SORT OUT BY MATNR.
LOOP AT OUT.
SELECT SINGLE MAKTX
INTO OUT-MAKTX
FROM MAKT
WHERE MATNR EQ OUT-MATNR
AND SPRAS EQ 'EN'.
MODIFY OUT.
ENDLOOP.
SORT OUT BY AUFNR MATNR.
ENDFORM. " GET_MATERIAL_DESCRIPTION
FORM TOP_OF_PAGE *
FORM TOP_OF_PAGE.
DATA: L_POS TYPE P.
first line
WRITE:/ TEXT-001. " Plant:
IF S_WERKS-HIGH NE SPACE.
WRITE: S_WERKS-LOW, TEXT-TO1, S_WERKS-HIGH.
ELSEIF S_WERKS-LOW NE SPACE.
LOOP AT S_WERKS.
WRITE: S_WERKS-LOW.
ENDLOOP.
ELSEIF S_WERKS-LOW EQ SPACE.
WRITE: TEXT-ALL.
ENDIF.
L_POS = ( SY-LINSZ DIV 2 ) - ( STRLEN( TEXT-TIT ) DIV 2 ).
POSITION L_POS. WRITE: TEXT-TIT.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-011, SY-UNAME RIGHT-JUSTIFIED. " User:
second line
WRITE:/ TEXT-002. " Order:
IF S_AUFNR-HIGH NE SPACE.
WRITE: S_AUFNR-LOW, TEXT-TO1, S_AUFNR-HIGH.
ELSEIF S_AUFNR-LOW NE SPACE.
LOOP AT S_AUFNR.
WRITE: S_AUFNR-LOW.
ENDLOOP.
ELSEIF S_AUFNR-LOW EQ SPACE.
WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-012,SY-DATUM. " Date:
third line
WRITE:/ TEXT-003. " Req. Date:
IF S_BDTER-HIGH(1) NE '0'.
WRITE: S_BDTER-LOW, TEXT-TO1, S_BDTER-HIGH.
ELSEIF S_BDTER-LOW(1) NE '0'.
LOOP AT S_BDTER.
WRITE: S_BDTER-LOW.
ENDLOOP.
ELSEIF S_BDTER-LOW(1) EQ '0'.
WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-013, SY-PAGNO. " Page:
ENDFORM. " TOP_OF_PAGE
FORM END_OF_LIST *
FORM END_OF_LIST.
DATA: L_POS TYPE P.
ULINE.
WRITE:/ '|', TEXT-021. " Delivered by:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-031. " Received by:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
WRITE:/ '|', TEXT-012. " Date:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-012. " Date:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
ENDFORM. " END_OF_LIST
*& Form WRITE_USING_ALV
text
FORM WRITE_USING_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = REPNAME
I_INTERNAL_TABNAME = 'OUT'
I_INCLNAME = REPNAME
CHANGING
CT_FIELDCAT = FIELDTAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPNAME
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
I_STRUCTURE_NAME = 'OUT'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDTAB
I_DEFAULT = 'A'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = EVENTS[]
IS_PRINT = PRINTS
TABLES
T_OUTTAB = OUT.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_LIST_DISPLAY'.
ENDIF.
ENDFORM. " WRITE_USING_ALV
THESE LINES ARE FOR THE INCLUDE ***
***INCLUDE Z_ALV_VARIABLES .
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
HEADING TYPE SLIS_T_LISTHEADER,
LAYOUT TYPE SLIS_LAYOUT_ALV,
EVENTS TYPE SLIS_T_EVENT,
REPNAME LIKE SY-REPID,
F2CODE LIKE SY-UCOMM VALUE '&ETA',
PRINTS TYPE SLIS_PRINT_ALV,
TITLE(40) TYPE C,
G_SAVE(1) TYPE C,
G_EXIT(1) TYPE C,
G_VARIANT LIKE DISVARIANT,
GX_VARIANT LIKE DISVARIANT.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
FORMNAME_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
FORMNAME_BEFORE_LINE TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE',
FORMNAME_AFTER_LINE TYPE SLIS_FORMNAME VALUE 'AFTER_LINE'.
FORM MAIN_STATEMENTS *
THIS IS THE CODE THAT MUST BE INSERTED IN THE MAIN PROGRAM
FORM MAIN_STATEMENTS.
Declare the parameter P_VARI wherever you want it. If you don't
want it, hide it with NO-DISPLAY, but it must exist.
parameters: p_vari like disvariant-variant. " ALV Variant
You have to add the following line after the data and parameter
declaration:
include z_alv_variables.
Then, after the data/parameter declaration, add these lines:
*initialization.
repname = sy-repid.
perform initialize_fieldcat using fieldtab[].
perform build_eventtab using events[].
perform build_comment using heading[].
perform initialize_variant.
If you are using the variable P_VARI (ALV Variant), also add this:
*at selection-screen on value-request for p_vari.
perform f4_for_variant.
*at selection-screen.
perform pai_of_selection_screen.
After the "END-OF-SELECTION" statement, add these lines:
perform build_layout using layout.
perform build_print using prints.
perform write_using_alv.
You also have to create the following forms: (you can find samples
in this program)
INITIALIZE_FIELDCAT
USER_COMMAND (only if you are creating a STATUS)
WRITE_USING_ALV
ENDFORM.
*& Form INITIALIZE_FIELDCAT_SAMPLE
THIS IS A SAMPLE, DO NOT USE THIS FORM IN YOUR PROGRAM
-->P_FIELDTAB[] text *
FORM INITIALIZE_FIELDCAT_SAMPLE USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT. " Always clear before use
CAT-TABNAME = 'I'. " Your internal table
CAT-REF_TABNAME = 'ZCUSTMAS'. " The data dictionary reference table
CAT-FIELDNAME = 'KUNNR'. " Name of your field in the itable.
CAT-COL_POS = 1. " Output position
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'NAME1'. " Next field
CAT-COL_POS = 2.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'STRAS'. " and the next
CAT-COL_POS = 3.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'LOEVM'.
CAT-SELTEXT_S = 'Del'. " You can always override the descrip-
CAT-SELTEXT_M = 'Delivery'. " tion (short, medium, large)
CAT-SELTEXT_L = 'Delivery Num'.
CAT-COL_POS = 4.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'FKIMG'.
CAT-DO_SUM = 'X'. " You want totals calculated.
CAT-NO_OUT = 'X'. " and hidden.
APPEND CAT TO P_TAB.
ENDFORM. " INITIALIZE_FIELDCAT
*& Form BUILD_EVENTTAB
THIS IS THE SAME FOR ALL THE PROGRAMS
-->P_EVENTS[] text *
FORM BUILD_EVENTTAB USING P_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_LIST
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_END_OF_LIST TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_BEFORE_LINE TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_AFTER_LINE_OUTPUT
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_AFTER_LINE TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENTTAB
*& Form BUILD_COMMENT
NOT REALLY NEEDED, BUT I'LL LEAVE IT THERE, JUST IN CASE...
-->P_HEADING[] text *
FORM BUILD_COMMENT USING P_HEADING TYPE SLIS_T_LISTHEADER.
DATA: HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C,
SEP(20) TYPE C.
CLEAR: HLINE, TEXT.
HLINE-TYP = 'H'.
write: text-101 to text+23.
HLINE-INFO = TEXT.
APPEND HLINE TO P_HEADING.
ENDFORM. " BUILD_COMMENT
*& Form INITIALIZE_VARIANT
VERY IMPORTANT WHEN YOU USE VARIANTS!!!
FORM INITIALIZE_VARIANT.
G_SAVE = 'A'.
CLEAR G_VARIANT.
G_VARIANT-REPORT = REPNAME.
GX_VARIANT = G_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = G_SAVE
CHANGING
CS_VARIANT = GX_VARIANT
EXCEPTIONS
NOT_FOUND = 2.
IF SY-SUBRC = 0.
P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDFORM. " INITIALIZE_VARIANT
*& Form PAI_OF_SELECTION_SCREEN
ALSO FOR VARIANTS
FORM PAI_OF_SELECTION_SCREEN.
IF NOT P_VARI IS INITIAL.
MOVE G_VARIANT TO GX_VARIANT.
MOVE P_VARI TO GX_VARIANT-VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
I_SAVE = G_SAVE
CHANGING
CS_VARIANT = GX_VARIANT
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3.
IF SY-SUBRC EQ 0.
G_VARIANT = GX_VARIANT.
ELSE.
PERFORM INITIALIZE_VARIANT.
ENDIF.
ELSE.
PERFORM INITIALIZE_VARIANT.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
*& Form F4_FOR_VARIANT
text
FORM F4_FOR_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
IS_VARIANT = G_VARIANT
I_SAVE = G_SAVE
IMPORTING
E_EXIT = G_EXIT
ES_VARIANT = GX_VARIANT
EXCEPTIONS
NOT_FOUND = 2.
IF SY-SUBRC = 2.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF G_EXIT = SPACE.
P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDIF.
ENDFORM. " F4_FOR_VARIANT
*& Form BUILD_LAYOUT
STANDARD LAYOUT
-->P_LAYOUT text *
FORM BUILD_LAYOUT USING P_LAYOUT TYPE SLIS_LAYOUT_ALV.
P_LAYOUT-F2CODE = F2CODE.
P_LAYOUT-ZEBRA = 'X'.
p_layout-detail_popup = 'X'.
P_LAYOUT-TOTALS_TEXT = SPACE.
P_LAYOUT-SUBTOTALS_TEXT = SPACE.
ENDFORM. " BUILD_LAYOUT
FORM BUILD_PRINT *
STANDARD PRINT OPTIONS *
--> P_PRINT *
FORM BUILD_PRINT USING P_PRINT TYPE SLIS_PRINT_ALV.
P_PRINT-NO_PRINT_LISTINFOS = 'X'.
P_PRINT-NO_PRINT_SELINFOS = ' '.
ENDFORM. " BUILD_PRINT
FORM PF_STATUS_SET *
NAME YOUR STATUS ALV. IF YOU NEED IT.. *
FORM PF_STATUS_SET USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ALV' EXCLUDING EXTAB.
ENDFORM. " PF_STATUS_SET
FORM USER_COMMAND_SAMPLE *
--> UCOMM *
--> SELFIELD *
FORM USER_COMMAND_SAMPLE USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE UCOMM.
WHEN 'MSXL'. " Export to Excel
perform set_excel_export.
CLEAR UCOMM.
WHEN 'MM03'.
set parameter id 'MAT' field selfield-value.
call transaction 'MM03' and skip first screen.
CLEAR UCOMM.
WHEN 'BGR1'.
perform fill_available.
perform graph_available.
CLEAR UCOMM.
WHEN 'DOCU'.
call function 'Z_HELP' exporting repname = repname.
ENDCASE.
ENDFORM. " USER_COMMAND
*& Form WRITE_USING_ALV_SAMPLE
*THIS IS A SAMPLE AND MUST BE WRITTEN DIRECTLY IN THE MAIN PROGRAM
FORM WRITE_USING_ALV_SAMPLE.
YOU CAN MERGE WITH A DATA DICTIONARY TABLE USING THIS:
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = repname
i_internal_tabname = 'I'
i_inclname = repname
changing
ct_fieldcat = fieldtab.
if sy-subrc <> 0.
write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_FIELDCATALOG_MERGE'.
endif.
OR JUST DISPLAY IT USING THIS:
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = repname
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'I'
is_layout = layout
it_fieldcat = fieldtab
i_default = 'A'
i_save = g_save
is_variant = g_variant
it_events = events[]
is_print = prints
tables
t_outtab = i.
if sy-subrc <> 0.
write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_LIST_DISPLAY'.
endif.
ENDFORM. " WRITE_USING_ALV
thanks
mrutyun^ -
help...........
it happen, because i wanted to customize my fire fox and drag the tabs over navigation tool bar.. now i can not see the tabs unless i click on group your tabs button :( and can not change it any moreBy PM
''hi John, i can not see, how many sites are open, because i do not see the tabs! i am sorry but i do not know how to explain it:( I see a window with my bookmarks -toolbar, menu bar and navigation bar, but no tabs for the sites, i am on! thank you for taking time and answering! ''
What happens when you open a new tab for instance use Keyboard shortcut Ctrl +T does that open a new tab that you can see. Please attach a screenshot of your ordinary Firefox page e.g. open on this forum. And a screenshot of the Group Your tabs view.
* [[How do I create a screenshot of my problem?]]
* [[How to make screenshots]]
I could suggest trying the Firefox reset, but that may be rather premature
* [[Reset Firefox – easily fix most problems]] -
HT201320 why can not delete the email by my iphone5
My Email ac is the office ac
i want delete the message
but can not
why?The received emails
it say can not drop to the trash -
Why can not load the Linux System?
I want to install Linux as the second OS on my notebook.I downloaded the Fedora8 software on the C: partition and decompressed it on the C: partition too. Then I copied and decompressed the file "isolinux " on the D: partition.
I installed the software "grub4dos" and made some changes in the document: \boot\grub\menu.lst. When I restart the computer and choose the Fedora8 from the loader menu, the Linux installation process can not be started and show the follow message:"Because follow document is lost,you can not start Windows:<Winder root>\system32\hal.dll. please copy it on."
What is the reason?
Message was edited by:
frank.qianHi,
I suppose it caused by grub4dos utility. Could you try using WinGrub?
Regards
Terry -
Why can not find the G/L document when use mr8m reverse .
Dear all,
I want to reverse a document use MR8M trans code, but the message tell me the document is not exists. but I can find the document in FB03 . why?
This document type is RE.
Please help me.sorry ,the document is error.
-
Why can not reverse the single cash flow ?
Hi.
I've created loan number using t-code : fn1v.
I've posted different cash flow.
I'd like to reverse specific interest amount using t-code : fnvm.
but it didn't work.
sap pop up the message.
============================================================
Diagnosis
A planned record is preventing document 44959 in company code HPT from being reversed.
Procedure
Delete or post the planned record and continue with the reversal.
============================================================
So i deleted all plan cash flow's data registered by fn8c or fn8x.
after that it works well.
I checked it out thoroughly. I found that it is impossible to reverse when it is included plan cash flow's data registered by fn8c or fn8x
why is that? Could you explain?
thanks in advance.Hi,
you can reverse the specific interest amount by using Tcode FNM3, provided you have not made clearing.In that case you have to reverse clearing & then use TCode FNM3.
rgds
Saurabh -
Why can not backup the archived log when I perform intensive insertions
I use RMAN to backup archivedlog, while I perform intensive insertion operation. I always get the message:
ORA-00235: controlfile fiexed table inconsistent due to concurrent update.
any idea please!
My logfile size is big enough.May be you need more number of redo smaller logs, i.e., smaller more redo-logs rather than bigger less # of redo logs. e.g., if you have two redo log group each 10M, make 4 redo log groups each 5M; which will cause more frequent check point..just a suggestion!
Good Luck. -
Help, I ca not opening the file, beacause the mac says Error opening the document, Acrobat can not open the while printing another document
Thank you very much for your replies Taggert_77 & swmtgoet_x :D
Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
The proper cmd is simply: java -jar soht-client-0.6.2.jar
I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
java -client -jar soht-client-0.6.2.jar soht.properties
Thank you again...the mystery remains
PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above). -
why my device says that the password for the exchange is Incorrect if the password is correct? i can not transfer my contacts to another smart device
Ask your Exchange administrator.
-
Why can not I see the name of a child process?
Hi,
I implemented a program for my project.
My program has two processes. One is a parent process. Another is a child process.
The parent process forks its child process. The child process is executed by execl() system call.
The program code implemented is followed.
=== abbreviation ===
switch(itmr_forkid = fork()) {
case 0:
RCode = execl("./itmr", "itmr", (char *) 0);
exit(0);
break;
=== abbreviation ===
I executed the program. And then I pressed "ps -ef" on command line.
[stp1ggsn1][user/shlim] ps -ef
UID PID PPID C STIME TTY TIME CMD
root 29402 29376 38 Mar 06 pts/0 11376:36 ibgfb
root 29403 29402 0 Mar 06 pts/0 0:15
However, why can not I see itmr process name for the child process?
When I executed the program for the parent process and the program for the child process respectively, I can see itmr process name for the child process.
I tried to look for the cause. But I could not find out the answer.
Please, give me your answer. Thank you for your answer in advance.Hi,
I am sorry that I loaded my question two times by mistake. -
Why I can not view the CMP bean created tables in cloudscape?
Hi:
I have deploy a CMP entity bean which will automatic create a table named ToolBeanTable.
I can find the table exist in cloudscape and its structure thought JDBC tool.
But I can not view the data, the error is said that the table is not existed.
Why?
Thanks!
John LeeHello,
I also had the same problem when I am using Microsoft SQL Server Management Studio 2012. I created a new table. When I select * from mytable, it can execute and I can see the table in the results part, but I can localize the table in left part "database"
menu. Actually, I suspect there is something missing in the Databases folder. When I am using SQL management studio in another machine, I can see a folder called tables under Database, which hold all the newly created tables. But I could not find it here.
On bottom, it may indicate the table is in "master" folder, but I can not find it either. Within "master" folder, there are "Views", "Synonyms", "Programmability", "Service Broker", "Storage", "Security" I already refreshed the Databases folder several times.
Can anyone kindly help me?
Thanks,
Feifei -
why do I can not hear the siri's voice on my iphone speaker anymore, why do I can not hear the siri's voice on my iphone speaker anymore
All apps - all paid and free apps include DRM protection that is tied to the iTunes that was used to download the apps. This means you have apps on your iPhone that were downloaded with your daughter's iTunes account. Apps cannot be transferred or merged with another iTunes account.
Delete the apps from your iPhone that were downloaded with your daughter's iTunes account to prevent being prompted for the account's password when there are app updates for the apps downloaded with the account. An iTunes account cannot be deleted. -
HT3625 i can not see the line in/built in input on the menu?do you know why?
i can not see the line in/built in input on the menu?does anyone know why?
i am trying to broadcast a live dj mixing but with the set up, i cant find the lin in input not even on the menue.
any clues will be appreciated.see shots from '11 to '12 going forward.
Maybe you are looking for
-
Trackpad erratic since upgrade
Hello, Soon after I upgraded my mid-2010 macbook pro to Mavericks, the trakcpad started acting erratically. The cursor follows my commands for some time, but after the computer receives some load, it starts to drift towards either right or left of th
-
I have hp g6 series laptop. I have some problem with opening files,it is showing .dll file is missing. And i think virus also infected my laptop,So i thought of recovering my laptop for first time by myself(laptop is still under warranty period only)
-
Hi, I was using the BAPI_PO_CHANGE for changing the purchase order..I hve changed and the condition data also changing.. In header of me22n t.code there will be 1 data displaying with item number as 10.. Now when i run the program tht particular
-
Game does not start after installing on mac pro
Game does not start after new install on mac pro ?
-
I Need WiFi in my dorm room, but I only have a plug.
I need to get wifi in my highschool dorm room, but I only have acess to an electrical plug. Is there a router I can buy that I can use to get wifi?