Can not change the field BSEG-REBZG on the document line item

Hi,
I am not able to change the invoice reference field on the document already posted. I have tried config. settings on change document line items but unsucessully.
The problem is with the field BSEG-REBZT, if the field value  is "V" RESIDUAL item I am not able to change it but if this field value is "Z" I am able to change it.
Can anyone who have come across this situation please guide me on this.
Thanks,
Srini

Hi Eli,
Thanks a lot for your resolution. I have assigned points to you.
Unfortunately my problem has not been solved inspite of implementing the so mentioned SAP notes.
Do we need to do anyother settings? Can you please guide me?
Thanks,
Srini

Similar Messages

  • Security Question - i can not change it - and i have forget the anwser what can i do please help me i'm new in iPhone

    Security Question - i can not change it - and i have forget the anwser what can i do please help me i'm new in iPhone

    There should be a blue link to your rescue e-mail there. If not, you will need to contact iTunes support. See this article: http://support.apple.com/kb/HT5312

  • GB01 Table - Include the field BSEG-ZLSCH for the substitution rule

    Dear all,
    I am facing a problem in the configuration a Substitution Rule. I need to create a new substitution rule for the field BSEG-ZLSCH (Payment Method). 
    I am trying to include the field BSEG-ZLSCH in the table GB01, but it is impossible, the GB01 Table is not changeable.  I not found out any Notes to solve this issue..
    Does any body know how to change the GB01 table? Is it necessay to open an OSS to SAP?
    Thanks in advance
    Aguinaldo Masetto
    Accenture do Brasil Ltda.

    Hi,
    To make BSEG-ZLSCH substitutable you would need to write a short (10 lines or so) ABAP program to remove the 'X' from the field BEXCLUDE in the GB01 table. or You can remove this in debugging mode.
    The 'X' marking meaning that the field is not available for Substitution as outlined in the note: 42615
    Please note:
    If you release fields other than the ones listed for substitution, then you must take responsibility for all the consequences!
    Regards
    Ravinagh Boni

  • Which table for the field "Net due date" of customer line items?

    Hi All,
    In which table could I find the field "Net due date" of customer line items?
    Thanks
    Gandalf

    I don't think there is a field for that.  In various SAP screens where you see this field, I think it is a calculated value (baseline date ZFBDT + days ZBD*T).

  • How to include the field BSEG-FDLEV in the invoice FV60 and F-43

    hi
    i am try to activate the cash management in my SAP, but i am not able to open the field BSEG-FDLEV (PLANNING LEVEL) in the additional data of the invoice voucher F-43 and FV60
    Is there anyone that knows how to do it? i have played with the field status group of the reconciliation account and the posting key, but nothing happened.
    I have understood that it should be some customizing company level.
    Any help is more than welcome.
    best regards
    Angelo

    Hi,
    Check the below link which is useful
    Re: change planning level in FI document
    Thanks
    Aravind

  • How to populate invoice reference field (bseg-rebzg) in accounting document

    Hi,
    I am working on a scenario in which first a billing document and its corresponding accounting document (say A) is generated.
    Then if there ia any correction, we create a credit memo request. From this credit memo request we create a credit note.
    After saving this credit note another accounting document (say B) is created. This new accounting document has "Invoice ref." field blank (BSEG-REBZG). However, I want to display first accouting document's number (i.e. A) in "Invoice ref." field.
    I tried to change the reference number field in user exits (called during credit note creation) but it didn't help and accounting document didn't get created.
    Can anyone please suggest how this can be done?
    Thanks in Advance!!
    Kind Regards,
    Priyanka.

    Hi,
    I really doubt that the number of invoice document get stored here. This is only filling up with "V" in our system for the credit memo accounting document referencing to an invoice document created with reference to billing document.
    Please read the help on this filed.
    In the standard system the field is used for:
    Credit memos which refer to a particular invoice item
    Subsequent invoices for an invoice item
    Partial payments for an invoice item
    Partial clearings of down payments.
    In the first two cases mentioned, the terms of payment are copied from the cross-referenced invoice item into the item currently being processed. This ensures that items due on the same date are paid together by automatic payment.
    A special rule applies to credit memos which have a "V" in this field. The due date is determined in the same way as for an invoice. If the field is empty (containing neither a document number nor a "V") the due date is the baseline date for payment.
    Regards,
    Ravi

  • GR can not printed for PO-Multiple account assignment on single line item ,

    Hi!
    I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
    Can I make a valuted GR against PO line item with multiple account assignment.
    I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but  the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
    Can you please let me have the solution ?
    Thank snd regards,
    Suranjana

    > I made a pr with single line item with 3 account assignment on percentage basis.I created a PO against .GR non valuated was automatically ticked so no account assignment was created at the time of GR posting.
    When you are having the multiple account assignment, then the system will force you to have GR-non valuated indicator being flagged which results in the fact there is not any FI document at GR posting stage and this is the standard feature of SAP.
    > Can I make a valuted GR against PO line item with multiple account assignment.
    No, not at all. The disability of GR indicator can be set in OME9 with account assignment category
    > I faced another problem .I displayed the GR and after ticking out put check box in the general data page of the GR doc. the output is being saved but  the update is terminated immediately.and no output page is generated in this item level.This output problem is not there at the time of single account assignment at PO line item.
    In fact, it is possible to maintain multiple account assignment for each and every PO line item by selecting the 'Multiple Account Assignment' button in the 'Account Assignment' View of the Item Detail of PO. However, for such multiple account assignment selection, no accounting document will be generated upon GR maintenance. This can only be done during IR via LIV process.

  • User exit -  Default 'V' within field BSEG-REBZG - fb01 and more

    Hi experts,
    I need to get the user exit so i can fill in the field BSEG-REBZG as default 'V' (picture from [User Exit in fb01|http://imageshack.us/photo/my-images/442/userexitfb01.png/])
    Can anyone help me out how to do this? I've read previous threads and i did the same but i still doesn't get the V in that field as you can see in the picture above.
    [Default Setting for BSEG-REBZG field in all Sales Orders|Default Setting for BSEG-REBZG field in all Sales Orders]
    Regards,
    Michael
    << Moderator message - Please do not promise points >>
    Edited by: Rob Burbank on Dec 14, 2011 9:33 AM

    i tried substitution but it doesn't seem like you can substitute that field  BSEG-REBZG.
    So how can you resolve this?
    I seem any topics about this but not really a good result....
    anyone please help?

  • Can not change files from "Read Only" In Windows 8.1

    I am the only Administrator on my computer, there are no other accounts. Some how all my files now have the read only attribute and I can not change it. It gives me the option to change it and I do and it looks like it got rid of it; but as soon as I close
    out of the properties window and go back into the read only attribute is still there.
    The read only attribute doesn't even act like itself because I can still edit the files that are in the selected read only folder. But it doesn't let me change the folder group options.
    None but one of these folders are customized so it is not a problem that can be resolved by the other threads I have read.
    Even new files I create have the read only attribute, please help, this is really annoying.

    Hi,
    For this problem, please refer to the KB below to repair the problem for test firstly, If no use, please feel free let us know.
    You cannot view or change the Read-only or the System attributes of folders in Windows Server 2003, in Windows XP, in Windows Vista or in Windows 7:
    http://support.microsoft.com/?kbid=326549
    Note: This article also applys to Windows 8.
    Roger Lu
    TechNet Community Support

  • Can not change the field property - 10gR2 reports crashing on Linux :(

    All I want to do, is to change one field's property from NUMBER to DATE in the property palette. It does not allow me to do it (not east like forms). I can not change the field property - 10gR2 reports keep crashing on Linux :(
    I don't know if this is a Linux specific iDS issue, or a generic one.
    What are the proper steps to change one field (in my query, the field name is ptime, it was defined as a number field originally, and now I need to change it to DATE and apply the proper format mask). The matching database field definition was modified from number to date.
    very frustrating...
    Any input is appreciated.
    Message was edited by:
    zaferaktan

    nop, did not change anything in the select statement at all. Just selected the related query under the data model (in the navigator), then selected the related query from within the property panel, connected to the db, then from the related navigor menu selected compile all, when the related query was highlighted (selected). Then I saved it, checked the groups, and bingo - the datatype was changed from number to date. Then I went to the related object under the page layout and applied the format mask (that was another funny story). And it worked. It is not as flexible as the forms for sure - pain in the a.. And I still don't know why Reports Builder keeps crashing on Linux - have no problems with Forms Developer on Linux at all. It is a certified RH platform with all the required libs, rpms, etc installed. I am certain it is not an installation issue. Maybe I should check Metalink and apply if an iDS 10gR2 patch exists for reports.

  • I can not change the time in activity Appointment in WebUi

    Dear Experts!
    I can not change the time in activity Appointment when creating: calendar -> month -> click on the day
    snapshot of problem:
    http://imglink.ru/show-image.php?id=e7a096115a6371ffab46c701f8e470ba
    When I create a Appointment (Activities -> Create Appointment) of all good:
    http://imglink.ru/show-image.php?id=ef65a38bdf7fc77eb9a71ec5c3ad5603
    Help me this problem?

    You need to add that attribute using the config tool for your view configuration. Select the attribute All Day from the context node BTDATE in the available fields to your display field and then save it. It should now be visible in your UI and now you can select or uncheck it to make the time field enable. Check the below image
    http://imglink.ru/show-image.php?id=a9a660778c0fee2b3fd7409d620eddc5
    Regards,
    Shobhit

  • Can not change the control level of item attribute "Inventory Asset Value"

    I can not change the control level of the item attribute "Inventory Asset Value" from Master Level to Org Level. It's show me the message "FRM-40200: Field is protected against update".
    Version is below:
    Oracle Application: 10.7SC
    Form: INVIDCTL 6.0.26

    I did a trace when I chage the control level. the SQL is below:
    SELECT COUNT(*)
    FROM CST_ITEM_COSTS CHILD
    , CST_ITEM_COSTS MASTER
    WHERE MASTER.INVENTORY_ITEM_ID = CHILD.INVENTORY_ITEM_ID (+)
    AND MASTER.COST_TYPE_ID = 1
    AND CHILD.COST_TYPE_ID (+) = 1
    AND NVL(MASTER.ITEM_COST,0) != NVL(CHILD.ITEM_COST (+) ,DECODE(MASTER.ITEM_COST, NULL ,0,-99999))
    AND MASTER.ORGANIZATION_ID IN (SELECT MASTER_ORGANIZATION_ID
    FROM MTL_PARAMETERS
    WHERE ORGANIZATION_ID != MASTER_ORGANIZATION_ID )
    AND CHILD.ORGANIZATION_ID IN (SELECT ORGANIZATION_ID
    FROM MTL_PARAMETERS
    WHERE MASTER_ORGANIZATION_ID = MASTER.ORGANIZATION_ID )

  • HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

    I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
    He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
    But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set  up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car  pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
    I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

    You have to enter the Apple ID and password. You are running into the Activation Lock
    iCloud: Find My iPhone Activation Lock in iOS 7
    Is there a way to find my Apple ID Name if I can't remember it?
    Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
    How do I change or recover a forgotten Apple ID Password?
    If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

  • How can i change the email address that the new secuirty questions answers get sent to, it is the wrong address and i can not change it. please help

    Hi
    i bought the itunes music credit, and when tried to redeem it asked for my ID, i have put the details, then it asked for the security questions answers, which i can not remember. when i try to reset, the email get sent to un unknown email address which i dont own... i tried everything to update my email addresses and its still not changing. i dont know how this weird email got there, i dont own it....
    please help!!!
    thanks,
    Nawrus

    You won't be able to change the rescue email address on your acocunt until you can answer two of your questions, if you don't recognise the address then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

    I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

    What is the problem specifiaclly?
    If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
    You could also try Image Processor Pro.
    Scripts Page

Maybe you are looking for