Can not create directory error while creating database

i am creating database using dbca in oel but when i try to do so i get an error saying can not create directory pawii
and pawii is the sid
actually oracle is installed on u01 and i am creating database in u02
but this error is not allowing me to create database but when i try to create database in uo1 the database installed successfully but this is not happening when i try to create database in another mount point u02

987018 wrote:
so finally i had solved the problem myself as people like rukbat are very unhelpful in nature here
all we had to do is we had to change the group of the folder to oracle and oinstall where we are going to create our new database :)Actually he tries to be quite helpful. But sometimes the help you need isn't the help you want.
"When you need me but do not want me, then I must stay. When you want me but no longer need me, then I have to go." (Nanny McPhee)

Similar Messages

JAVA NOT INSTALLED.. error while creating java source

Hi All,
I am trying to create java sources in oracle database lke
create or replace and compile java source named rnp as
public class RNP as
import java.util.GregorianCalendar;
public class calcrnp {
But it is throwing an error : JAVA NOT INSTALLED..
I am not getting any clue regarding this...
Can any please help me..
Thanks
Ashok

How about
create or replace java source named "rnp" as
import java.util.GregorianCalendar;
public class calcrnp {
/K.

Dataset can not be open error while running report rtcctool

Hello Experts,
While running report rtcctool we are gettin following dumps the says
ABAP runtime errors DATASET_CANT_OPEN
Occurred on 05/27/2011 at 10:00:52
Unable to open file "/usr/sap/B**/DVEBMGS00/sec/SAP_AGS_OLCNT_VERIFY.pse".
I am aware that the eror is happening because of this file but not sure from where to get this file. Please let me know any of you aware about this.
Regards
Yogesh

Hi all.
I have the same problem and explore all possible solutions found in this discussion and others without satisfactory result.
Everything points that may be an inconsistency error external certificate which is in the DB. Anyone know how to fix this.
Greetings.

Error while creating an Infoset

Hi
I am getting an error in rsa1 while creating an Infoset. The error message reads "Network is only supported in WinGUI". But I do not get any error while creating Infoobjects or DSOs or Infocubes. Error screenshot is attached.
I am using SAPGUI for Mac.
Is this a known issue ?
Thanks for your attention.
Arijit

Hi Arijit,
Could you refer this below SCN Post,
http://scn.sap.com/thread/137946
-Arun.M.D

Error while Creating form on remote Database

Hi All
I m getting error while creating form on remote database thru
Database link
Line/Column Error
7099/21 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7099/9 PL/SQL: SQL Statement ignored
7749/16 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7749/9 PL/SQL: SQL Statement ignored
and statement at line specified is insert statement. and at end
of insert statement Returning caluse is there as follows
RETURNING ROWID INTO "_ROWID";
This returning clause is causing error. Does anybody knows how
to handel it??
Thanks
Yogesh

Yogesh
I haven't seen the ora-03116 problem.
What version of Portal are you running? Are the databases at the same version? Does your table have longs or anything strange in it?
Can you query the table via the synonyms and link in sqlplus as the application schema? This is a good test because it eliminates Portal.
You should try setting up synonyms etc for the emp table. If you still get the problem then Oracle may be able to replicate it. If not, then there's sth funny about your table maybe.
I agree with Vishnu about creating everything in sqlplus. I create all my links and synonyms in sqlplus. They are all public. I have 2 synonyms: one takes you over the link the other takes you to the right schema. It's flexible and it works.
data database: D grants to P (local schema) on table T
public syn T = D.T (sys) (get the right schema)
portal dbase : public db link to data database connecting as P
public syn T = T@dblink (sys) (over the link)
P is a schema created in both databases.
Test is: P in portal dbase can "select * from T" and gets the right data.
I never, ever refer to a schema when defining a form. ie. never P.T or D.T or whatever. I always refer simply to a synonym. For the above my form would be defined simply on the table T.
Hope this helps
Greg

Error while creating database in classic appln

Hi All,
I am getting this error while creating database in classic application.
com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
Can anyone please let me know why I am getting it?
Thanks in advance

Can you check for a more specific error code in the Application log? There can be various reasons for this:
1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
HTH-
Jasmine.

Getting error while creating table from one database to other.

Hi,
We are getting below error while creating the table from one database to other.
SQL> create table fnd_lobs parallel compress as select * from [email protected];
create table fnd_lobs parallel compress as select * from [email protected]
ERROR at line 1:
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
ORA-02063: preceding line from EEXIT2TEST
ORA-01555: snapshot too old: rollback segment number 28 with name "_SYSSMU28$"
too small
Regards,
Bhatia

hi
what are the apps version local and remote database???
Snapshot too old errors occur because Oracle can 't reconstruct a consistent
image of a block for the purposes of a consistent read.
I feel at remote database, you are using UNDO, it will be rather easy to iincrease the undo retention time or increase the undo tablespace size.. if you are dealing with roll back segments, you may have rollback segments whose optimal values are too small...
increase roll back segments size and select again then
the following metalink notes might be helpful
ORA-01555 "Snapshot too old" - Detailed Explanation Doc ID: 40689.1
How To Avoid ORA-01555: Snapshot Too Old When Running PAAPIMP Doc ID: 603259.1
OERR: ORA 1555 "snapshot too old (rollback segment too small)" Doc ID: 18954.1

Authentication error while creating directory server through dscc

Hi
I am getting authentication error while creating a DS from dscc on windows box on a linux RHEL4 server.However I do not get an authentication issue when creating a ds on solaris box from same dscc.
Can someone guide me what might be the issue?
Thanks
Aarti

Hi,
Please check there is no firewall issue between your windows client to Linux directory server. You may be able to login via dscc but when you create DS instance, your dscc agent port might be an issue not able to talk to Directory server because of firewall.

Error while creating request list Unable to detect the SAP system directory

We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                                                 com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
     at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
     at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
     at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
     at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
     at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
     at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
     at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
     at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
     at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
Prathap

Did you get this solved?
I have the same problem

Error while creating database manually

hi guru's i am getting error while creating database manually
my sql is SQL>create database lily
logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
            group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
            group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
character set          WE8ISO8859P1
national character set utf8
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
            size 50M
            autoextend on
            next 10M maxsize unlimited
            extent management local
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
            size 10M
            autoextend on
            next 10M
            maxsize unlimited
undo tablespace undo
            datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
            size 10M
default temporary tablespace temp
            tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
            size 10M;and i am getting following error
create database lily
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
code}
Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PM

create database lily
logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
          group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
            group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf' size 150M
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
undo tablespace undo datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf' size 10M
default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
Edited by: rajeysh on Jul 19, 2011 6:59 PM

"Sales area is not defined" error while creating IBD

Hi All,
We are getting the below error while creating IBD:
Sales area    is not defined
No inbound delivery created for the replenishment delivery 0089799561
We are trying to create IBD from OBD.
We have the Z output type ZPED, which is basically same functionality as SPED.
When we trigger the ZPED in OBD, an idoc will be triggered and IBD will be created automatically.
Here in this case, we are getting the error when ZPED is triggered and we are seeing this error from the processing log of that output.
Below is the details of the processing log of failed ZPED:
Object 0089799561
   Output type: Stk.Transf.CrteDeliv
   Processing log for program /SPE/STO_ID_PROCESSING routine STO_ID_CREATI
   Sales area    is not defined
   No inbound delivery created for the replenishment delivery 0089799561
ZPED is triggered by a batch job in the system but when we are trying to manually trigger it, it got successful.
Please suggest what can be the root cause of it.

First of all, please avoid using abbreviated words which is not encouraged here. Second, what is the Business process that warrants you to create inbound delivery against outbound delivery. Whenever you post here and expect assistance from members, please ensure you provide maximum details with regard to business process and what you had configured so that it will be easy for others to understand.
G. Lakshmipathi

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Gating error while creating standby database in oracle 11g

Dear Gurus
I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 10-MAY-12
using channel ORA_AUX_DISK_1
contents of Memory Script:
backup as copy reuse
targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
'/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
executing Memory Script
Starting backup at 10-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
ORA-17629: Cannot connect to the remote database server
RMAN>
Regards
Rabi

Hello;
Generally for the connection to work you need to add something like this to the listener.ora file :
(SID_DESC =
    (global_dbname = STANDBY.hostname)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
    (sid_name = STANDBY)
)You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
Also you need an INIT for the Standby side :
STANDBY.__db_cache_size=343932928
STANDBY.__java_pool_size=4194304
STANDBY.__large_pool_size=4194304
STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
STANDBY.__pga_aggregate_target=281018368
STANDBY.__sga_target=834666496
STANDBY.__shared_io_pool_size=0
STANDBY.__shared_pool_size=469762048
STANDBY.__streams_pool_size=0
audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
audit_trail='db'
compatible='11.2.0.0.0'
control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
db_block_size=8192
db_domain='SOME.DOMAIN.COM'
db_flashback_retention_target=2880
db_name='PRIMARY'
db_recovery_file_dest_size=2147483648
db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
diagnostic_dest='/u01/app/oracle'
dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
open_cursors=300
pga_aggregate_target=277872640
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=833617920
undo_tablespace='UNDOTBS1'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=DEFER
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=STANDBY
STANDBY_FILE_MANAGEMENT=AUTO
DB_UNIQUE_NAME=STANDBYFinally
startup nomount
Start RMAN and issue duplicate command
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
Keys to success
1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
2. Hard coded listener on new Standby server.
3. Correct tnsnames.ora files.
4. Correct duplicate command.
Please consider closing some of you old answered questions
Best Regards
mseberg
Edited by: mseberg on May 10, 2012 7:06 AM

STRUST - Error while creating PSE

Hi all,
i want to create the PSE for SNC (SAP Cryptolib). -> Webservices with Certificates
SNC ID: sys-sapsnc@<domain>.com
Algorithm: RSA
Key Length: 1024
Error message:
Error while creating PSE
Message no. TRUST040
System: ERP 2005
System PSE is already created
SSL Server PSE is already created
SSL Client (Anonymous) PSE is already created
SSL Client (Standard) PSE is already created
regards

Hi Ralf,
I think I did something similar with XI about a year ago. You have to create or import some certificates / CA Certificates using STRUST (it depends if you have officially signed certificates or if you are using your own selfsigned certificates. In this case you need the root certificate as well).
=> Note 510007 might be useful
=> When importing your own root CA make sure you choose a valid namespace for Trust Center (starting with Z e.g. ZSELFCA) and choose Root-CA for Category.
=> If you want to view, modify or deltete entries choose menu > certificate > database and you will see a screen where you can search for the entries in the certificate database
Just in case you have problems with your PSE make a copy of directory /usr/sap/SID/DVEBMGS<XX>/sec
and delete your existing PSE to create a new one (Carefully!!!
- First of all make sure you installed SAPSECULIB.
- After that you should create a new PSE or create new entries for SSL Server (optionally client etc.)
- You can create an entry directly in TRUST Manager. The resulting certificate will be selfsigned. You can sign
this cert using your CA and then after having it signed you have to import the certificate response (use openssl to do cert stuff)
=> This might be helpful: http://help.sap.com/saphelp_nw04/helpdata/en/24/61ab3b92818b70e10000000a114084/frameset.htm
You can import your own certificates from menu > certificate > import in the maintenance section of the SSL Server PSE or you can just click on the "Import Certificate" button
When done you should check that your generated/imported certificates are working by simple accessing your server using the https protocol (e.g. https://<server>:<sslport>/sap/public/ping should be fine)
Just in case you used your own CA to sign the certificates your Browser will display popup saying that the certificate is not signed by any known trusted CA (we know that so we can ignore that
If you want to use client cert authentication you have to repeat the explained steps for SSL Client (Standard)
=> Create the PSE, sign the generated certificate etc., import the certificate response
When this is all done you should do the following:
- Create a RFC Destination for HTTPS Communication (call sm59, open the Folder HTTP Connections to External Server)
- In the destination enter the destination Host and the path of your application
- After that open the TAB Logon/Security
- In the Status of Secure Protocol Section choose SSL active and DEFAULT SSL Client (Standard) as SSL Client Certificate
- Save all your changes
You should now be able to use this destination for your Webservice communication and it will be encrypted using SSL
Hope this helps
If you have further questions let me know
Cheers

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Can not create directory error while creating database

Similar Messages

Maybe you are looking for